dm: pci: Add a uclass for PCI
Add a uclass for PCI controllers and a generic one for PCI devices. Adjust
the 'pci' command and the existing PCI support to work with this new uclass.
Keep most of the compatibility code in a separate file so that it can be
removed one day.
TODO: Add more header file comments to the new parts of pci.h
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/common/board_r.c b/common/board_r.c
index 0335f6b..af01e1c 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -230,7 +230,9 @@
#ifdef CONFIG_PCI
static int initr_pci(void)
{
+#ifndef CONFIG_DM_PCI
pci_init();
+#endif
return 0;
}
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index e3a77e3..dcecef8 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -48,6 +48,7 @@
unsigned char HeaderType;
unsigned short VendorID;
pci_dev_t dev;
+ int ret;
if (!hose)
return;
@@ -74,7 +75,10 @@
if (pci_skip_dev(hose, dev))
continue;
- pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
+ ret = pci_read_config_word(dev, PCI_VENDOR_ID,
+ &VendorID);
+ if (ret)
+ goto error;
if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
continue;
@@ -91,8 +95,12 @@
BusNum, Device, Function);
pci_header_show(dev);
}
- }
- }
+ }
+ }
+
+ return;
+error:
+ printf("Cannot read bus configuration: %d\n", ret);
}
diff --git a/doc/driver-model/pci-info.txt b/doc/driver-model/pci-info.txt
new file mode 100644
index 0000000..63efcb7
--- /dev/null
+++ b/doc/driver-model/pci-info.txt
@@ -0,0 +1,70 @@
+PCI with Driver Model
+=====================
+
+How busses are scanned
+----------------------
+
+Any config read will end up at pci_read_config(). This uses
+uclass_get_device_by_seq() to get the PCI bus for a particular bus number.
+Bus number 0 will need to be requested first, and the alias in the device
+tree file will point to the correct device:
+
+
+ aliases {
+ pci0 = &pci;
+ };
+
+ pci: pci-controller {
+ compatible = "sandbox,pci";
+ ...
+ };
+
+
+If there is no alias the devices will be numbered sequentially in the device
+tree.
+
+The call to uclass_get_device by seq() will cause the PCI bus to be probed.
+This does a scan of the bus to locate available devices. These devices are
+bound to their appropriate driver if available. If there is no driver, then
+they are bound to a generic PCI driver which does nothing.
+
+After probing a bus, the available devices will appear in the device tree
+under that bus.
+
+Note that this is all done on a lazy basis, as needed, so until something is
+touched on PCI it will not be probed.
+
+PCI devices can appear in the device tree. If they do this serves to specify
+the driver to use for the device. In this case they will be bound at
+start-up.
+
+
+Sandbox
+-------
+
+With sandbox we need a device emulator for each device on the bus since there
+is no real PCI bus. This works by looking in the device tree node for a
+driver. For example:
+
+
+ pci@1f,0 {
+ compatible = "pci-generic";
+ reg = <0xf800 0 0 0 0>;
+ emul@1f,0 {
+ compatible = "sandbox,swap-case";
+ };
+ };
+
+This means that there is a 'sandbox,swap-case' driver at that bus position.
+Note that the first cell in the 'reg' value is the bus/device/function. See
+PCI_BDF() for the encoding (it is also specified in the IEEE Std 1275-1994
+PCI bus binding document, v2.1)
+
+When this bus is scanned we will end up with something like this:
+
+`- * pci-controller @ 05c660c8, 0
+ `- pci@1f,0 @ 05c661c8, 63488
+ `- emul@1f,0 @ 05c662c8
+
+When accesses go to the pci@1f,0 device they are forwarded to its child, the
+emulator.
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index e69de29..8b7e2ee 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -0,0 +1,12 @@
+menu "PCI"
+
+config DM_PCI
+ bool "Enable driver mode for PCI"
+ depends on DM
+ help
+ Use driver model for PCI. Driver model is the new method for
+ orgnising devices in U-Boot. For PCI, driver model keeps track of
+ available PCI devices, allows scanning of PCI buses and provides
+ device configuration support.
+
+endmenu
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 856a5f5..db82786 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -5,8 +5,14 @@
# SPDX-License-Identifier: GPL-2.0+
#
+ifneq ($(CONFIG_DM_PCI),)
+obj-$(CONFIG_PCI) += pci-uclass.o pci_compat.o
+else
+obj-$(CONFIG_PCI) += pci.o
+endif
+obj-$(CONFIG_PCI) += pci_common.o pci_auto.o pci_rom.o
+
obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
-obj-$(CONFIG_PCI) += pci.o pci_common.o pci_auto.o pci_rom.o
obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
new file mode 100644
index 0000000..d48d865
--- /dev/null
+++ b/drivers/pci/pci-uclass.c
@@ -0,0 +1,639 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <inttypes.h>
+#include <pci.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct pci_controller *pci_bus_to_hose(int busnum)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus);
+ if (ret) {
+ debug("%s: Cannot get bus %d: ret=%d\n", __func__, busnum, ret);
+ return NULL;
+ }
+ return dev_get_uclass_priv(bus);
+}
+
+/**
+ * pci_get_bus_max() - returns the bus number of the last active bus
+ *
+ * @return last bus number, or -1 if no active buses
+ */
+static int pci_get_bus_max(void)
+{
+ struct udevice *bus;
+ struct uclass *uc;
+ int ret = -1;
+
+ ret = uclass_get(UCLASS_PCI, &uc);
+ uclass_foreach_dev(bus, uc) {
+ if (bus->seq > ret)
+ ret = bus->seq;
+ }
+
+ debug("%s: ret=%d\n", __func__, ret);
+
+ return ret;
+}
+
+int pci_last_busno(void)
+{
+ struct pci_controller *hose;
+ struct udevice *bus;
+ struct uclass *uc;
+ int ret;
+
+ debug("pci_last_busno\n");
+ ret = uclass_get(UCLASS_PCI, &uc);
+ if (ret || list_empty(&uc->dev_head))
+ return -1;
+
+ /* Probe the last bus */
+ bus = list_entry(uc->dev_head.prev, struct udevice, uclass_node);
+ debug("bus = %p, %s\n", bus, bus->name);
+ assert(bus);
+ ret = device_probe(bus);
+ if (ret)
+ return ret;
+
+ /* If that bus has bridges, we may have new buses now. Get the last */
+ bus = list_entry(uc->dev_head.prev, struct udevice, uclass_node);
+ hose = dev_get_uclass_priv(bus);
+ debug("bus = %s, hose = %p\n", bus->name, hose);
+
+ return hose->last_busno;
+}
+
+int pci_get_ff(enum pci_size_t size)
+{
+ switch (size) {
+ case PCI_SIZE_8:
+ return 0xff;
+ case PCI_SIZE_16:
+ return 0xffff;
+ default:
+ return 0xffffffff;
+ }
+}
+
+int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
+ struct udevice **devp)
+{
+ struct udevice *dev;
+
+ for (device_find_first_child(bus, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ struct pci_child_platdata *pplat;
+
+ pplat = dev_get_parent_platdata(dev);
+ if (pplat && pplat->devfn == find_devfn) {
+ *devp = dev;
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
+int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus);
+ if (ret)
+ return ret;
+ return pci_bus_find_devfn(bus, PCI_MASK_BUS(bdf), devp);
+}
+
+static int pci_device_matches_ids(struct udevice *dev,
+ struct pci_device_id *ids)
+{
+ struct pci_child_platdata *pplat;
+ int i;
+
+ pplat = dev_get_parent_platdata(dev);
+ if (!pplat)
+ return -EINVAL;
+ for (i = 0; ids[i].vendor != 0; i++) {
+ if (pplat->vendor == ids[i].vendor &&
+ pplat->device == ids[i].device)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
+ int *indexp, struct udevice **devp)
+{
+ struct udevice *dev;
+
+ /* Scan all devices on this bus */
+ for (device_find_first_child(bus, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ if (pci_device_matches_ids(dev, ids) >= 0) {
+ if ((*indexp)-- <= 0) {
+ *devp = dev;
+ return 0;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
+
+int pci_find_device_id(struct pci_device_id *ids, int index,
+ struct udevice **devp)
+{
+ struct udevice *bus;
+
+ /* Scan all known buses */
+ for (uclass_first_device(UCLASS_PCI, &bus);
+ bus;
+ uclass_next_device(&bus)) {
+ if (!pci_bus_find_devices(bus, ids, &index, devp))
+ return 0;
+ }
+ *devp = NULL;
+
+ return -ENODEV;
+}
+
+int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long value, enum pci_size_t size)
+{
+ struct dm_pci_ops *ops;
+
+ ops = pci_get_ops(bus);
+ if (!ops->write_config)
+ return -ENOSYS;
+ return ops->write_config(bus, bdf, offset, value, size);
+}
+
+int pci_write_config(pci_dev_t bdf, int offset, unsigned long value,
+ enum pci_size_t size)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus);
+ if (ret)
+ return ret;
+
+ return pci_bus_write_config(bus, PCI_MASK_BUS(bdf), offset, value,
+ size);
+}
+
+int pci_write_config32(pci_dev_t bdf, int offset, u32 value)
+{
+ return pci_write_config(bdf, offset, value, PCI_SIZE_32);
+}
+
+int pci_write_config16(pci_dev_t bdf, int offset, u16 value)
+{
+ return pci_write_config(bdf, offset, value, PCI_SIZE_16);
+}
+
+int pci_write_config8(pci_dev_t bdf, int offset, u8 value)
+{
+ return pci_write_config(bdf, offset, value, PCI_SIZE_8);
+}
+
+int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long *valuep, enum pci_size_t size)
+{
+ struct dm_pci_ops *ops;
+
+ ops = pci_get_ops(bus);
+ if (!ops->read_config)
+ return -ENOSYS;
+ return ops->read_config(bus, bdf, offset, valuep, size);
+}
+
+int pci_read_config(pci_dev_t bdf, int offset, unsigned long *valuep,
+ enum pci_size_t size)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus);
+ if (ret)
+ return ret;
+
+ return pci_bus_read_config(bus, PCI_MASK_BUS(bdf), offset, valuep,
+ size);
+}
+
+int pci_read_config32(pci_dev_t bdf, int offset, u32 *valuep)
+{
+ unsigned long value;
+ int ret;
+
+ ret = pci_read_config(bdf, offset, &value, PCI_SIZE_32);
+ if (ret)
+ return ret;
+ *valuep = value;
+
+ return 0;
+}
+
+int pci_read_config16(pci_dev_t bdf, int offset, u16 *valuep)
+{
+ unsigned long value;
+ int ret;
+
+ ret = pci_read_config(bdf, offset, &value, PCI_SIZE_16);
+ if (ret)
+ return ret;
+ *valuep = value;
+
+ return 0;
+}
+
+int pci_read_config8(pci_dev_t bdf, int offset, u8 *valuep)
+{
+ unsigned long value;
+ int ret;
+
+ ret = pci_read_config(bdf, offset, &value, PCI_SIZE_8);
+ if (ret)
+ return ret;
+ *valuep = value;
+
+ return 0;
+}
+
+int pci_auto_config_devices(struct udevice *bus)
+{
+ struct pci_controller *hose = bus->uclass_priv;
+ unsigned int sub_bus;
+ struct udevice *dev;
+ int ret;
+
+ sub_bus = bus->seq;
+ debug("%s: start\n", __func__);
+ pciauto_config_init(hose);
+ for (ret = device_find_first_child(bus, &dev);
+ !ret && dev;
+ ret = device_find_next_child(&dev)) {
+ struct pci_child_platdata *pplat;
+
+ pplat = dev_get_parent_platdata(dev);
+ unsigned int max_bus;
+ pci_dev_t bdf;
+
+ bdf = PCI_ADD_BUS(bus->seq, pplat->devfn);
+ debug("%s: device %s\n", __func__, dev->name);
+ max_bus = pciauto_config_device(hose, bdf);
+ sub_bus = max(sub_bus, max_bus);
+ }
+ debug("%s: done\n", __func__);
+
+ return sub_bus;
+}
+
+int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf)
+{
+ struct udevice *parent, *bus;
+ int sub_bus;
+ int ret;
+
+ debug("%s\n", __func__);
+ parent = hose->bus;
+
+ /* Find the bus within the parent */
+ ret = pci_bus_find_devfn(parent, bdf, &bus);
+ if (ret) {
+ debug("%s: Cannot find device %x on bus %s: %d\n", __func__,
+ bdf, parent->name, ret);
+ return ret;
+ }
+
+ sub_bus = pci_get_bus_max() + 1;
+ debug("%s: bus = %d/%s\n", __func__, sub_bus, bus->name);
+ pciauto_prescan_setup_bridge(hose, bdf, bus->seq);
+
+ ret = device_probe(bus);
+ if (ret) {
+ debug("%s: Cannot probe bus bus %s: %d\n", __func__, bus->name,
+ ret);
+ return ret;
+ }
+ if (sub_bus != bus->seq) {
+ printf("%s: Internal error, bus '%s' got seq %d, expected %d\n",
+ __func__, bus->name, bus->seq, sub_bus);
+ return -EPIPE;
+ }
+ sub_bus = pci_get_bus_max();
+ pciauto_postscan_setup_bridge(hose, bdf, sub_bus);
+
+ return sub_bus;
+}
+
+int pci_bind_bus_devices(struct udevice *bus)
+{
+ ulong vendor, device;
+ ulong header_type;
+ pci_dev_t devfn, end;
+ bool found_multi;
+ int ret;
+
+ found_multi = false;
+ end = PCI_DEVFN(PCI_MAX_PCI_DEVICES - 1, PCI_MAX_PCI_FUNCTIONS - 1);
+ for (devfn = PCI_DEVFN(0, 0); devfn < end; devfn += PCI_DEVFN(0, 1)) {
+ struct pci_child_platdata *pplat;
+ struct udevice *dev;
+ ulong class;
+
+ if (PCI_FUNC(devfn) && !found_multi)
+ continue;
+ /* Check only the first access, we don't expect problems */
+ ret = pci_bus_read_config(bus, devfn, PCI_HEADER_TYPE,
+ &header_type, PCI_SIZE_8);
+ if (ret)
+ goto error;
+ pci_bus_read_config(bus, devfn, PCI_VENDOR_ID, &vendor,
+ PCI_SIZE_16);
+ if (vendor == 0xffff || vendor == 0x0000)
+ continue;
+
+ if (!PCI_FUNC(devfn))
+ found_multi = header_type & 0x80;
+
+ debug("%s: bus %d/%s: found device %x, function %d\n", __func__,
+ bus->seq, bus->name, PCI_DEV(devfn), PCI_FUNC(devfn));
+ pci_bus_read_config(bus, devfn, PCI_DEVICE_ID, &device,
+ PCI_SIZE_16);
+ pci_bus_read_config(bus, devfn, PCI_CLASS_DEVICE, &class,
+ PCI_SIZE_16);
+
+ /* Find this device in the device tree */
+ ret = pci_bus_find_devfn(bus, devfn, &dev);
+
+ /* If nothing in the device tree, bind a generic device */
+ if (ret == -ENODEV) {
+ char name[30], *str;
+ const char *drv;
+
+ sprintf(name, "pci_%x:%x.%x", bus->seq,
+ PCI_DEV(devfn), PCI_FUNC(devfn));
+ str = strdup(name);
+ if (!str)
+ return -ENOMEM;
+ drv = class == PCI_CLASS_BRIDGE_PCI ?
+ "pci_bridge_drv" : "pci_generic_drv";
+ ret = device_bind_driver(bus, drv, str, &dev);
+ }
+ if (ret)
+ return ret;
+
+ /* Update the platform data */
+ pplat = dev_get_parent_platdata(dev);
+ pplat->devfn = devfn;
+ pplat->vendor = vendor;
+ pplat->device = device;
+ pplat->class = class;
+ }
+
+ return 0;
+error:
+ printf("Cannot read bus configuration: %d\n", ret);
+
+ return ret;
+}
+
+static int pci_uclass_post_bind(struct udevice *bus)
+{
+ /*
+ * Scan the device tree for devices. This does not probe the PCI bus,
+ * as this is not permitted while binding. It just finds devices
+ * mentioned in the device tree.
+ *
+ * Before relocation, only bind devices marked for pre-relocation
+ * use.
+ */
+ return dm_scan_fdt_node(bus, gd->fdt_blob, bus->of_offset,
+ gd->flags & GD_FLG_RELOC ? false : true);
+}
+
+static int decode_regions(struct pci_controller *hose, const void *blob,
+ int parent_node, int node)
+{
+ int pci_addr_cells, addr_cells, size_cells;
+ int cells_per_record;
+ const u32 *prop;
+ int len;
+ int i;
+
+ prop = fdt_getprop(blob, node, "ranges", &len);
+ if (!prop)
+ return -EINVAL;
+ pci_addr_cells = fdt_address_cells(blob, node);
+ addr_cells = fdt_address_cells(blob, parent_node);
+ size_cells = fdt_size_cells(blob, node);
+
+ /* PCI addresses are always 3-cells */
+ len /= sizeof(u32);
+ cells_per_record = pci_addr_cells + addr_cells + size_cells;
+ hose->region_count = 0;
+ debug("%s: len=%d, cells_per_record=%d\n", __func__, len,
+ cells_per_record);
+ for (i = 0; i < MAX_PCI_REGIONS; i++, len -= cells_per_record) {
+ u64 pci_addr, addr, size;
+ int space_code;
+ u32 flags;
+ int type;
+
+ if (len < cells_per_record)
+ break;
+ flags = fdt32_to_cpu(prop[0]);
+ space_code = (flags >> 24) & 3;
+ pci_addr = fdtdec_get_number(prop + 1, 2);
+ prop += pci_addr_cells;
+ addr = fdtdec_get_number(prop, addr_cells);
+ prop += addr_cells;
+ size = fdtdec_get_number(prop, size_cells);
+ prop += size_cells;
+ debug("%s: region %d, pci_addr=%" PRIx64 ", addr=%" PRIx64
+ ", size=%" PRIx64 ", space_code=%d\n", __func__,
+ hose->region_count, pci_addr, addr, size, space_code);
+ if (space_code & 2) {
+ type = flags & (1U << 30) ? PCI_REGION_PREFETCH :
+ PCI_REGION_MEM;
+ } else if (space_code & 1) {
+ type = PCI_REGION_IO;
+ } else {
+ continue;
+ }
+ debug(" - type=%d\n", type);
+ pci_set_region(hose->regions + hose->region_count++, pci_addr,
+ addr, size, type);
+ }
+
+ /* Add a region for our local memory */
+ pci_set_region(hose->regions + hose->region_count++, 0, 0,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ return 0;
+}
+
+static int pci_uclass_pre_probe(struct udevice *bus)
+{
+ struct pci_controller *hose;
+ int ret;
+
+ debug("%s, bus=%d/%s, parent=%s\n", __func__, bus->seq, bus->name,
+ bus->parent->name);
+ hose = bus->uclass_priv;
+
+ /* For bridges, use the top-level PCI controller */
+ if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) {
+ hose->ctlr = bus;
+ ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset,
+ bus->of_offset);
+ if (ret) {
+ debug("%s: Cannot decode regions\n", __func__);
+ return ret;
+ }
+ } else {
+ struct pci_controller *parent_hose;
+
+ parent_hose = dev_get_uclass_priv(bus->parent);
+ hose->ctlr = parent_hose->bus;
+ }
+ hose->bus = bus;
+ hose->first_busno = bus->seq;
+ hose->last_busno = bus->seq;
+
+ return 0;
+}
+
+static int pci_uclass_post_probe(struct udevice *bus)
+{
+ int ret;
+
+ /* Don't scan buses before relocation */
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ debug("%s: probing bus %d\n", __func__, bus->seq);
+ ret = pci_bind_bus_devices(bus);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_PCI_PNP
+ ret = pci_auto_config_devices(bus);
+#endif
+
+ return ret < 0 ? ret : 0;
+}
+
+static int pci_uclass_child_post_bind(struct udevice *dev)
+{
+ struct pci_child_platdata *pplat;
+ struct fdt_pci_addr addr;
+ int ret;
+
+ if (dev->of_offset == -1)
+ return 0;
+
+ /*
+ * We could read vendor, device, class if available. But for now we
+ * just check the address.
+ */
+ pplat = dev_get_parent_platdata(dev);
+ ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
+ FDT_PCI_SPACE_CONFIG, "reg", &addr);
+
+ if (ret) {
+ if (ret != -ENOENT)
+ return -EINVAL;
+ } else {
+ /* extract the bdf from fdt_pci_addr */
+ pplat->devfn = addr.phys_hi & 0xffff00;
+ }
+
+ return 0;
+}
+
+int pci_bridge_read_config(struct udevice *bus, pci_dev_t devfn, uint offset,
+ ulong *valuep, enum pci_size_t size)
+{
+ struct pci_controller *hose = bus->uclass_priv;
+ pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn);
+
+ return pci_bus_read_config(hose->ctlr, bdf, offset, valuep, size);
+}
+
+int pci_bridge_write_config(struct udevice *bus, pci_dev_t devfn, uint offset,
+ ulong value, enum pci_size_t size)
+{
+ struct pci_controller *hose = bus->uclass_priv;
+ pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn);
+
+ return pci_bus_write_config(hose->ctlr, bdf, offset, value, size);
+}
+
+UCLASS_DRIVER(pci) = {
+ .id = UCLASS_PCI,
+ .name = "pci",
+ .post_bind = pci_uclass_post_bind,
+ .pre_probe = pci_uclass_pre_probe,
+ .post_probe = pci_uclass_post_probe,
+ .child_post_bind = pci_uclass_child_post_bind,
+ .per_device_auto_alloc_size = sizeof(struct pci_controller),
+ .per_child_platdata_auto_alloc_size =
+ sizeof(struct pci_child_platdata),
+};
+
+static const struct dm_pci_ops pci_bridge_ops = {
+ .read_config = pci_bridge_read_config,
+ .write_config = pci_bridge_write_config,
+};
+
+static const struct udevice_id pci_bridge_ids[] = {
+ { .compatible = "pci-bridge" },
+ { }
+};
+
+U_BOOT_DRIVER(pci_bridge_drv) = {
+ .name = "pci_bridge_drv",
+ .id = UCLASS_PCI,
+ .of_match = pci_bridge_ids,
+ .ops = &pci_bridge_ops,
+};
+
+UCLASS_DRIVER(pci_generic) = {
+ .id = UCLASS_PCI_GENERIC,
+ .name = "pci_generic",
+};
+
+static const struct udevice_id pci_generic_ids[] = {
+ { .compatible = "pci-generic" },
+ { }
+};
+
+U_BOOT_DRIVER(pci_generic_drv) = {
+ .name = "pci_generic_drv",
+ .id = UCLASS_PCI_GENERIC,
+ .of_match = pci_generic_ids,
+};
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 378efbf..e8da977 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -432,13 +432,20 @@
switch (class) {
case PCI_CLASS_BRIDGE_PCI:
- hose->current_busno++;
+ DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n",
+ PCI_DEV(dev));
+
pciauto_setup_device(hose, dev, 2, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
- DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
-
+#ifdef CONFIG_DM_PCI
+ n = dm_pci_hose_probe_bus(hose, dev);
+ if (n < 0)
+ return n;
+ sub_bus = (unsigned int)n;
+#else
/* Passing in current_busno allows for sibling P2P bridges */
+ hose->current_busno++;
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
/*
* need to figure out if this is a subordinate bridge on the bus
@@ -451,6 +458,7 @@
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
+#endif
break;
case PCI_CLASS_STORAGE_IDE:
@@ -475,7 +483,9 @@
DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
PCI_DEV(dev));
+#ifndef CONFIG_DM_PCI
hose->current_busno++;
+#endif
break;
#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
diff --git a/drivers/pci/pci_compat.c b/drivers/pci/pci_compat.c
new file mode 100644
index 0000000..d6938c1
--- /dev/null
+++ b/drivers/pci/pci_compat.c
@@ -0,0 +1,43 @@
+/*
+ * Compatibility functions for pre-driver-model code
+ *
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#define DEBUG
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <pci.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+
+#define PCI_HOSE_OP(rw, name, size, type) \
+int pci_hose_##rw##_config_##name(struct pci_controller *hose, \
+ pci_dev_t dev, \
+ int offset, type value) \
+{ \
+ return pci_##rw##_config##size(dev, offset, value); \
+}
+
+PCI_HOSE_OP(read, byte, 8, u8 *)
+PCI_HOSE_OP(read, word, 16, u16 *)
+PCI_HOSE_OP(read, dword, 32, u32 *)
+PCI_HOSE_OP(write, byte, 8, u8)
+PCI_HOSE_OP(write, word, 16, u16)
+PCI_HOSE_OP(write, dword, 32, u32)
+
+pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
+{
+ struct pci_child_platdata *pplat;
+ struct udevice *bus, *dev;
+
+ if (pci_find_device_id(ids, index, &dev))
+ return -1;
+ bus = dev->parent;
+ pplat = dev_get_parent_platdata(dev);
+
+ return PCI_ADD_BUS(bus->seq, pplat->devfn);
+}
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 91bb90d..b984407 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -34,6 +34,8 @@
UCLASS_I2C_GENERIC, /* Generic I2C device */
UCLASS_I2C_EEPROM, /* I2C EEPROM device */
UCLASS_MOD_EXP, /* RSA Mod Exp device */
+ UCLASS_PCI, /* PCI bus */
+ UCLASS_PCI_GENERIC, /* Generic PCI bus device */
UCLASS_COUNT,
UCLASS_INVALID = -1,
diff --git a/include/pci.h b/include/pci.h
index 4e8826a..07345fd 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -457,12 +457,15 @@
typedef int pci_dev_t;
-#define PCI_BUS(d) (((d) >> 16) & 0xff)
-#define PCI_DEV(d) (((d) >> 11) & 0x1f)
-#define PCI_FUNC(d) (((d) >> 8) & 0x7)
-#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8)
-
-#define PCI_ANY_ID (~0)
+#define PCI_BUS(d) (((d) >> 16) & 0xff)
+#define PCI_DEV(d) (((d) >> 11) & 0x1f)
+#define PCI_FUNC(d) (((d) >> 8) & 0x7)
+#define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8)
+#define PCI_MASK_BUS(bdf) ((bdf) & 0xffff)
+#define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn))
+#define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f))
+#define PCI_VENDEV(v, d) (((v) << 16) | (d))
+#define PCI_ANY_ID (~0)
struct pci_device_id {
unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
@@ -495,7 +498,12 @@
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
+#ifdef CONFIG_DM_PCI
+ struct udevice *bus;
+ struct udevice *ctlr;
+#else
struct pci_controller *next;
+#endif
int first_busno;
int last_busno;
@@ -511,7 +519,7 @@
struct pci_config_table *config_table;
void (*fixup_irq)(struct pci_controller *, pci_dev_t);
-
+#ifndef CONFIG_DM_PCI
/* Low-level architecture-dependent routines */
int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
@@ -519,17 +527,21 @@
int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
+#endif
/* Used by auto config */
struct pci_region *pci_mem, *pci_io, *pci_prefetch;
/* Used by ppc405 autoconfig*/
struct pci_region *pci_fb;
+#ifndef CONFIG_DM_PCI
int current_busno;
void *priv_data;
+#endif
};
+#ifndef CONFIG_DM_PCI
static inline void pci_set_ops(struct pci_controller *hose,
int (*read_byte)(struct pci_controller*,
pci_dev_t, int where, u8 *),
@@ -550,6 +562,7 @@
hose->write_word = write_word;
hose->write_dword = write_dword;
}
+#endif
#ifdef CONFIG_PCI_INDIRECT_BRIDGE
extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
@@ -602,12 +615,14 @@
extern int pci_hose_write_config_dword(struct pci_controller *hose,
pci_dev_t dev, int where, u32 val);
+#ifndef CONFIG_DM_PCI
extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
+#endif
extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
pci_dev_t dev, int where, u8 *val);
@@ -719,5 +734,265 @@
pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum,
struct pci_device_id *ids, int *indexp);
+/* Access sizes for PCI reads and writes */
+enum pci_size_t {
+ PCI_SIZE_8,
+ PCI_SIZE_16,
+ PCI_SIZE_32,
+};
+
+struct udevice;
+
+#ifdef CONFIG_DM_PCI
+/**
+ * struct pci_child_platdata - information stored about each PCI device
+ *
+ * Every device on a PCI bus has this per-child data.
+ *
+ * It can be accessed using dev_get_parentdata(dev) if dev->parent is a
+ * PCI bus (i.e. UCLASS_PCI)
+ *
+ * @devfn: Encoded device and function index - see PCI_DEVFN()
+ * @vendor: PCI vendor ID (see pci_ids.h)
+ * @device: PCI device ID (see pci_ids.h)
+ * @class: PCI class, 3 bytes: (base, sub, prog-if)
+ */
+struct pci_child_platdata {
+ int devfn;
+ unsigned short vendor;
+ unsigned short device;
+ unsigned int class;
+};
+
+/* PCI bus operations */
+struct dm_pci_ops {
+ /**
+ * read_config() - Read a PCI configuration value
+ *
+ * PCI buses must support reading and writing configuration values
+ * so that the bus can be scanned and its devices configured.
+ *
+ * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always.
+ * If bridges exist it is possible to use the top-level bus to
+ * access a sub-bus. In that case @bus will be the top-level bus
+ * and PCI_BUS(bdf) will be a different (higher) value
+ *
+ * @bus: Bus to read from
+ * @bdf: Bus, device and function to read
+ * @offset: Byte offset within the device's configuration space
+ * @valuep: Place to put the returned value
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+ int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
+ ulong *valuep, enum pci_size_t size);
+ /**
+ * write_config() - Write a PCI configuration value
+ *
+ * @bus: Bus to write to
+ * @bdf: Bus, device and function to write
+ * @offset: Byte offset within the device's configuration space
+ * @value: Value to write
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+ int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
+ ulong value, enum pci_size_t size);
+};
+
+/* Get access to a PCI bus' operations */
+#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops)
+
+/**
+ * pci_bind_bus_devices() - scan a PCI bus and bind devices
+ *
+ * Scan a PCI bus looking for devices. Bind each one that is found. If
+ * devices are already bound that match the scanned devices, just update the
+ * child data so that the device can be used correctly (this happens when
+ * the device tree describes devices we expect to see on the bus).
+ *
+ * Devices that are bound in this way will use a generic PCI driver which
+ * does nothing. The device can still be accessed but will not provide any
+ * driver interface.
+ *
+ * @bus: Bus containing devices to bind
+ * @return 0 if OK, -ve on error
+ */
+int pci_bind_bus_devices(struct udevice *bus);
+
+/**
+ * pci_auto_config_devices() - configure bus devices ready for use
+ *
+ * This works through all devices on a bus by scanning the driver model
+ * data structures (normally these have been set up by pci_bind_bus_devices()
+ * earlier).
+ *
+ * Space is allocated for each PCI base address register (BAR) so that the
+ * devices are mapped into memory and I/O space ready for use.
+ *
+ * @bus: Bus containing devices to bind
+ * @return 0 if OK, -ve on error
+ */
+int pci_auto_config_devices(struct udevice *bus);
+
+/**
+ * pci_bus_find_bdf() - Find a device given its PCI bus address
+ *
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @devp: Returns the device for this address, if found
+ * @return 0 if OK, -ENODEV if not found
+ */
+int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp);
+
+/**
+ * pci_bus_find_devfn() - Find a device on a bus
+ *
+ * @find_devfn: PCI device address (device and function only)
+ * @devp: Returns the device for this address, if found
+ * @return 0 if OK, -ENODEV if not found
+ */
+int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
+ struct udevice **devp);
+
+/**
+ * pci_get_ff() - Returns a mask for the given access size
+ *
+ * @size: Access size
+ * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for
+ * PCI_SIZE_32
+ */
+int pci_get_ff(enum pci_size_t size);
+
+/**
+ * pci_bus_find_devices () - Find devices on a bus
+ *
+ * @bus: Bus to search
+ * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
+ * @indexp: Pointer to device index to find. To find the first matching
+ * device, pass 0; to find the second, pass 1, etc. This
+ * parameter is decremented for each non-matching device so
+ * can be called repeatedly.
+ * @devp: Returns matching device if found
+ * @return 0 if found, -ENODEV if not
+ */
+int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
+ int *indexp, struct udevice **devp);
+
+/**
+ * pci_find_device_id() - Find a device on any bus
+ *
+ * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
+ * @index: Index number of device to find, 0 for the first match, 1 for
+ * the second, etc.
+ * @devp: Returns matching device if found
+ * @return 0 if found, -ENODEV if not
+ */
+int pci_find_device_id(struct pci_device_id *ids, int index,
+ struct udevice **devp);
+
+/**
+ * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices
+ *
+ * This probes the given bus which causes it to be scanned for devices. The
+ * devices will be bound but not probed.
+ *
+ * @hose specifies the PCI hose that will be used for the scan. This is
+ * always a top-level bus with uclass UCLASS_PCI. The bus to scan is
+ * in @bdf, and is a subordinate bus reachable from @hose.
+ *
+ * @hose: PCI hose to scan
+ * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number)
+ * @return 0 if OK, -ve on error
+ */
+int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf);
+
+/**
+ * pci_bus_read_config() - Read a configuration value from a device
+ *
+ * TODO(sjg@chromium.org): We should be able to pass just a device and have
+ * it do the right thing. It would be good to have that function also.
+ *
+ * @bus: Bus to read from
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @valuep: Place to put the returned value
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long *valuep, enum pci_size_t size);
+
+/**
+ * pci_bus_write_config() - Write a configuration value to a device
+ *
+ * @bus: Bus to write from
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @value: Value to write
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long value, enum pci_size_t size);
+
+/*
+ * The following functions provide access to the above without needing the
+ * size parameter. We are trying to encourage the use of the 8/16/32-style
+ * functions, rather than byte/word/dword. But both are supported.
+ */
+int pci_write_config32(pci_dev_t pcidev, int offset, u32 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
+ u32 value)
+{
+ return pci_write_config32(pcidev, offset, value);
+}
+
+int pci_write_config16(pci_dev_t pcidev, int offset, u16 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_word(pci_dev_t pcidev, int offset,
+ u16 value)
+{
+ return pci_write_config16(pcidev, offset, value);
+}
+
+int pci_write_config8(pci_dev_t pcidev, int offset, u8 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_byte(pci_dev_t pcidev, int offset,
+ u8 value)
+{
+ return pci_write_config8(pcidev, offset, value);
+}
+
+int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_dword(pci_dev_t pcidev, int offset,
+ u32 *valuep)
+{
+ return pci_read_config32(pcidev, offset, valuep);
+}
+
+int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_word(pci_dev_t pcidev, int offset,
+ u16 *valuep)
+{
+ return pci_read_config16(pcidev, offset, valuep);
+}
+
+int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_byte(pci_dev_t pcidev, int offset,
+ u8 *valuep)
+{
+ return pci_read_config8(pcidev, offset, valuep);
+}
+
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _PCI_H */