mxs_nand: Add support for i.MX8M
Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h
index ca70731..cb73aae 100644
--- a/arch/arm/include/asm/mach-imx/dma.h
+++ b/arch/arm/include/asm/mach-imx/dma.h
@@ -53,7 +53,7 @@
MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
MXS_MAX_DMA_CHANNELS,
};
-#elif defined(CONFIG_MX6) || defined(CONFIG_MX7)
+#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
enum {
MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h
index d7baf13..d68953e 100644
--- a/arch/arm/include/asm/mach-imx/regs-apbh.h
+++ b/arch/arm/include/asm/mach-imx/regs-apbh.h
@@ -95,7 +95,7 @@
mxs_reg_32(hw_apbh_version)
};
-#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
struct mxs_apbh_regs {
mxs_reg_32(hw_apbh_ctrl0)
mxs_reg_32(hw_apbh_ctrl1)
@@ -274,7 +274,7 @@
#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800
#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000
#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000
-#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0
#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001
#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002
@@ -390,7 +390,7 @@
#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000
#endif
-#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
#endif
diff --git a/arch/arm/include/asm/mach-imx/regs-bch.h b/arch/arm/include/asm/mach-imx/regs-bch.h
index 3c1abb7..4b99edb 100644
--- a/arch/arm/include/asm/mach-imx/regs-bch.h
+++ b/arch/arm/include/asm/mach-imx/regs-bch.h
@@ -127,7 +127,7 @@
#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
-#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
#define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11)
#define BCH_FLASHLAYOUT0_ECC0_OFFSET 11
#else
@@ -158,7 +158,7 @@
#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
-#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
#define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11)
#define BCH_FLASHLAYOUT1_ECCN_OFFSET 11
#else
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 4f37ba7..655e79f 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -44,7 +44,7 @@
config APBH_DMA
bool "Support APBH DMA"
- depends on MX23 || MX28 || MX6 || MX7
+ depends on MX23 || MX28 || MX6 || MX7 || IMX8M
help
Enable APBH DMA driver.
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 1513312..8d17f8f 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -215,7 +215,7 @@
#if defined(CONFIG_MX23)
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
#endif
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 23201ca..c46fec3 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -259,12 +259,12 @@
config NAND_MXS
bool "MXS NAND support"
- depends on MX23 || MX28 || MX6 || MX7
+ depends on MX23 || MX28 || MX6 || MX7 || IMX8M
select SYS_NAND_SELF_INIT
imply CMD_NAND
select APBH_DMA
- select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
- select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
+ select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M
+ select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M
help
This enables NAND driver for the NAND flash controller on the
MXS processors.
diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c
index 2ac06a5..facedf9 100644
--- a/drivers/mtd/nand/raw/mxs_nand.c
+++ b/drivers/mtd/nand/raw/mxs_nand.c
@@ -31,7 +31,7 @@
#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
-#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2
#else
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0
@@ -773,7 +773,7 @@
if (status[i] == 0xff) {
if (is_mx6dqp() || is_mx7() ||
- is_mx6ul())
+ is_mx6ul() || is_imx8m())
if (readl(&bch_regs->hw_bch_debug1))
flag = 1;
continue;
@@ -1172,7 +1172,7 @@
/* Set erase threshold to ecc strength for mx6ul, mx6qp and mx7 */
if (is_mx6dqp() || is_mx7() ||
- is_mx6ul())
+ is_mx6ul() || is_imx8m())
writel(BCH_MODE_ERASE_THRESHOLD(geo->ecc_strength),
&bch_regs->hw_bch_mode);
@@ -1311,7 +1311,7 @@
nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
- if (is_mx6sx() || is_mx7())
+ if (is_mx6sx() || is_mx7() || is_imx8m())
nand_info->max_ecc_strength_supported = 62;
else
nand_info->max_ecc_strength_supported = 40;