commit ff99041b3b6dccc1649d0c8512303a5240fb8785
author Ye Li <ye.li@nxp.com> Mon May 04 22:08:54 2020 +0800
committer Stefano Babic <sbabic@denx.de> Sun May 10 20:55:20 2020 +0200
tree 12a466b66e1940a5cc7c82f67237a814762e1299
parent 29f40c07e7a649c6fc44a3a44449dce1ee733816

mxs_nand: Add support for i.MX8M

Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

drivers/mtd/nand/raw/Kconfig

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 23201ca..c46fec3 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -259,12 +259,12 @@
 
 config NAND_MXS
 	bool "MXS NAND support"
-	depends on MX23 || MX28 || MX6 || MX7
+	depends on MX23 || MX28 || MX6 || MX7 || IMX8M
 	select SYS_NAND_SELF_INIT
 	imply CMD_NAND
 	select APBH_DMA
-	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
-	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
+	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M
+	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M
 	help
 	  This enables NAND driver for the NAND flash controller on the
 	  MXS processors.

drivers/mtd/nand/raw/mxs_nand.c

diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c
index 2ac06a5..facedf9 100644
--- a/drivers/mtd/nand/raw/mxs_nand.c
+++ b/drivers/mtd/nand/raw/mxs_nand.c
@@ -31,7 +31,7 @@
 
 #define	MXS_NAND_DMA_DESCRIPTOR_COUNT		4
 
-#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	2
 #else
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	0
@@ -773,7 +773,7 @@
 
 		if (status[i] == 0xff) {
 			if (is_mx6dqp() || is_mx7() ||
-			    is_mx6ul())
+			    is_mx6ul() || is_imx8m())
 				if (readl(&bch_regs->hw_bch_debug1))
 					flag = 1;
 			continue;
@@ -1172,7 +1172,7 @@
 
 	/* Set erase threshold to ecc strength for mx6ul, mx6qp and mx7 */
 	if (is_mx6dqp() || is_mx7() ||
-	    is_mx6ul())
+	    is_mx6ul() || is_imx8m())
 		writel(BCH_MODE_ERASE_THRESHOLD(geo->ecc_strength),
 		       &bch_regs->hw_bch_mode);
 
@@ -1311,7 +1311,7 @@
 	nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
 	nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
 
-	if (is_mx6sx() || is_mx7())
+	if (is_mx6sx() || is_mx7() || is_imx8m())
 		nand_info->max_ecc_strength_supported = 62;
 	else
 		nand_info->max_ecc_strength_supported = 40;