SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode
Fix PHY addresses for QSGMII Riser Card working in
SGMII mode on board P3041/P5020/P4080/P5040/B4860.
QSGMII Riser Card can work in SGMII mode, but
having the different PHY addresses.
So the following steps should be done:
1. Confirm whether QSGMII Riser Card is used.
2. If yes, set the proper PHY address.
Generally, the function is_qsgmii_riser_card() is
for step 1, and set_sgmii_phy() for step 2.
However, there are still some special situations,
take P5040 and B4860 as examples, the PHY addresses
need to be changed when serdes protocol is changed,
so it is necessary to confirm the protocol before
setting PHY addresses.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
diff --git a/board/freescale/b4860qds/b4860qds_qixis.h b/board/freescale/b4860qds/b4860qds_qixis.h
index 2fabbc7..272afc1 100644
--- a/board/freescale/b4860qds/b4860qds_qixis.h
+++ b/board/freescale/b4860qds/b4860qds_qixis.h
@@ -21,4 +21,9 @@
#define QIXIS_SRDS1CLK_122 0x5a
#define QIXIS_SRDS1CLK_125 0x5e
+
+/* SGMII */
+#define PHY_BASE_ADDR 0x18
+#define PORT_NUM 0x04
+#define REGNUM 0x00
#endif
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index dc4ef80..a8fc845 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -150,6 +150,8 @@
struct memac_mdio_info tg_memac_mdio_info;
unsigned int i;
unsigned int serdes1_prtcl, serdes2_prtcl;
+ int qsgmii;
+ struct mii_dev *bus;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -281,6 +283,22 @@
break;
}
+ /*set PHY address for QSGMII Riser Card on slot2*/
+ bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+ qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM, REGNUM);
+
+ if (qsgmii) {
+ switch (serdes2_prtcl) {
+ case 0xb2:
+ case 0x8d:
+ fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
+ break;
+ default:
+ break;
+ }
+ }
+
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
index a594efc..35825c4 100644
--- a/board/freescale/corenet_ds/eth_hydra.c
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -76,6 +76,8 @@
#define BRDCFG2_REG_GPIO_SEL 0x20
+#define PHY_BASE_ADDR 0x00
+
/*
* BRDCFG1 mask and value for each MAC
*
@@ -365,6 +367,7 @@
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
+ struct mii_dev *bus;
printf("Initializing Fman\n");
@@ -470,6 +473,9 @@
}
}
+ bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO");
+ set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR);
+
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
index 597d0cb..e5beb55 100644
--- a/board/freescale/corenet_ds/eth_p4080.c
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -37,6 +37,9 @@
#define EMI1_MASK 0xc0000000
#define EMI2_MASK 0x30000000
+#define PHY_BASE_ADDR 0x00
+#define PHY_BASE_ADDR_SLOT5 0x10
+
static int mdio_mux[NUM_FM_PORTS];
static char *mdio_names[16] = {
@@ -290,6 +293,7 @@
int i;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
+ struct mii_dev *bus;
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
@@ -370,6 +374,9 @@
break;
}
}
+ bus = mii_dev_for_muxval(EMI1_SLOT5);
+ set_sgmii_phy(bus, FM1_DTSEC1,
+ CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5);
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
int idx = i - FM1_10GEC1, lane, slot;
@@ -435,6 +442,11 @@
}
}
+ bus = mii_dev_for_muxval(EMI1_SLOT3);
+ set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
+ bus = mii_dev_for_muxval(EMI1_SLOT4);
+ set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
+
for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
int idx = i - FM2_10GEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
index 91ac196..ad1bffd 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -77,6 +77,12 @@
#define BRDCFG2_REG_GPIO_SEL 0x20
+/* SGMII */
+#define PHY_BASE_ADDR 0x00
+#define REGNUM 0x00
+#define PORT_NUM_FM1 0x04
+#define PORT_NUM_FM2 0x02
+
/*
* BRDCFG1 mask and value for each MAC
*
@@ -415,6 +421,9 @@
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
+ struct mii_dev *bus;
+ int qsgmii;
+ int phy_real_addr;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
@@ -575,6 +584,42 @@
}
}
+ bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO");
+ qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM);
+
+ if (qsgmii) {
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) {
+ if (fm_info_get_enet_if(i) ==
+ PHY_INTERFACE_MODE_SGMII) {
+ phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1;
+ fm_info_set_phy_address(i, phy_real_addr);
+ }
+ }
+ switch (srds_prtcl) {
+ case 0x00:
+ case 0x03:
+ case 0x04:
+ case 0x06:
+ case 0x11:
+ case 0x2a:
+ case 0x34:
+ case 0x36:
+ fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2);
+ fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3);
+ break;
+ case 0x01:
+ case 0x02:
+ case 0x05:
+ case 0x07:
+ case 0x35:
+ fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0);
+ fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
+ break;
+ default:
+ break;
+ }
+ }
+
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
@@ -686,6 +731,11 @@
}
}
+ bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO");
+ set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR);
+ bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO");
+ set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR);
+
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the