rockchip: Support OP-TEE for ARM in FIT images created by binman
CONFIG_SPL_OPTEE_IMAGE option is used during DRAM size detection for
Rockchip ARM platform to indicate that an OP-TEE binary was already loaded
and a Trusted Execution Environment (TEE) is available in order to
block/reserve a memory-region for it.
This adds a bunch of new `#if's` to u-boot-rockchip.dtsi to include the
OP-TEE binary in the FIT image for ARM SOCs if CONFIG_SPL_OPTEE_IMAGE is
selected.
That makes it a little harder to read, but I opted for that, because all
the duplicates in an extra ARM-OP-TEE-specfic .dtsi would be the greater
evil, IMHO. Besides it's more likley being "forgotten" to sync when changes
in u-boot-rockchip.dtsi are made.
The no longer required rockchip-optee.dtsi and it's inclusions are dropped.
The hardcoded load address is common across all OP-TEE implemenations for
Rockchip (vendor and upstream).
The OP-TEE-binary is non-optional if CONFIG_SPL_OPTEE_IMAGE is selected and
there will be an error if the file does not exist and/or `TEE=` build
option is missing.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index 2878b80..be2658e 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -33,9 +33,13 @@
};
};
-#if defined(CONFIG_SPL_FIT) && defined(CONFIG_ARM64)
+#if defined(CONFIG_SPL_FIT) && (defined(CONFIG_ARM64) || defined(CONFIG_SPL_OPTEE_IMAGE))
fit: fit {
+#ifdef CONFIG_ARM64
description = "FIT image for U-Boot with bl31 (TF-A)";
+#else
+ description = "FIT image with OP-TEE";
+#endif
#address-cells = <1>;
fit,fdt-list = "of-list";
filename = "u-boot.itb";
@@ -44,10 +48,14 @@
offset = <CONFIG_SPL_PAD_TO>;
images {
u-boot {
- description = "U-Boot (64-bit)";
+ description = "U-Boot";
type = "standalone";
os = "U-Boot";
+#ifdef CONFIG_ARM64
arch = "arm64";
+#else
+ arch = "arm";
+#endif
compression = "none";
load = <CONFIG_TEXT_BASE>;
entry = <CONFIG_TEXT_BASE>;
@@ -60,6 +68,7 @@
#endif
};
+#ifdef CONFIG_ARM64
@atf-SEQ {
fit,operation = "split-elf";
description = "ARM Trusted Firmware";
@@ -99,6 +108,25 @@
};
#endif
};
+#else
+ op-tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm";
+ os = "tee";
+ compression = "none";
+ load = <(CFG_SYS_SDRAM_BASE + 0x8400000)>;
+ entry = <(CFG_SYS_SDRAM_BASE + 0x8400000)>;
+
+ tee-os {
+ };
+#ifdef CONFIG_SPL_FIT_SIGNATURE
+ hash {
+ algo = "sha256";
+ };
+#endif
+ };
+#endif
@fdt-SEQ {
description = "fdt-NAME";
@@ -117,7 +145,11 @@
@config-SEQ {
description = "NAME.dtb";
fdt = "fdt-SEQ";
+#ifdef CONFIG_ARM64
fit,firmware = "atf-1", "u-boot";
+#else
+ fit,firmware = "op-tee", "u-boot";
+#endif
fit,loadables;
};
};
@@ -150,7 +182,7 @@
};
};
-#ifdef CONFIG_ARM64
+#if defined(CONFIG_ARM64) || defined(CONFIG_SPL_OPTEE_IMAGE)
fit {
type = "blob";
filename = "u-boot.itb";