| Shaohui Xie | 02b5d2e | 2015-11-11 17:58:37 +0800 | [diff] [blame^] | 1 | Overview |
| 2 | -------- |
| 3 | The LS1043A Development System (QDS) is a high-performance computing, |
| 4 | evaluation, and development platform that supports the QorIQ LS1043A |
| 5 | LayerScape Architecture processor. The LS1043AQDS provides SW development |
| 6 | platform for the Freescale LS1043A processor series, with a complete |
| 7 | debugging environment. |
| 8 | |
| 9 | LS1043A SoC Overview |
| 10 | -------------------- |
| 11 | The LS1043A integrated multicore processor combines four ARM Cortex-A53 |
| 12 | processor cores with datapath acceleration optimized for L2/3 packet |
| 13 | processing, single pass security offload and robust traffic management |
| 14 | and quality of service. |
| 15 | |
| 16 | The LS1043A SoC includes the following function and features: |
| 17 | - Four 64-bit ARM Cortex-A53 CPUs |
| 18 | - 1 MB unified L2 Cache |
| 19 | - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving |
| 20 | support |
| 21 | - Data Path Acceleration Architecture (DPAA) incorporating acceleration the |
| 22 | the following functions: |
| 23 | - Packet parsing, classification, and distribution (FMan) |
| 24 | - Queue management for scheduling, packet sequencing, and congestion |
| 25 | management (QMan) |
| 26 | - Hardware buffer management for buffer allocation and de-allocation (BMan) |
| 27 | - Cryptography acceleration (SEC) |
| 28 | - Ethernet interfaces by FMan |
| 29 | - Up to 1 x XFI supporting 10G interface |
| 30 | - Up to 1 x QSGMII |
| 31 | - Up to 4 x SGMII supporting 1000Mbps |
| 32 | - Up to 2 x SGMII supporting 2500Mbps |
| 33 | - Up to 2 x RGMII supporting 1000Mbps |
| 34 | - High-speed peripheral interfaces |
| 35 | - Three PCIe 2.0 controllers, one supporting x4 operation |
| 36 | - One serial ATA (SATA 3.0) controllers |
| 37 | - Additional peripheral interfaces |
| 38 | - Three high-speed USB 3.0 controllers with integrated PHY |
| 39 | - Enhanced secure digital host controller (eSDXC/eMMC) |
| 40 | - Quad Serial Peripheral Interface (QSPI) Controller |
| 41 | - Serial peripheral interface (SPI) controller |
| 42 | - Four I2C controllers |
| 43 | - Two DUARTs |
| 44 | - Integrated flash controller supporting NAND and NOR flash |
| 45 | - QorIQ platform's trust architecture 2.1 |
| 46 | |
| 47 | LS1043AQDS board Overview |
| 48 | ----------------------- |
| 49 | - SERDES Connections, 4 lanes supporting: |
| 50 | - PCI Express - 3.0 |
| 51 | - SGMII, SGMII 2.5 |
| 52 | - QSGMII |
| 53 | - SATA 3.0 |
| 54 | - XFI |
| 55 | - DDR Controller |
| 56 | - 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s |
| 57 | -IFC/Local Bus |
| 58 | - One in-socket 128 MB NOR flash 16-bit data bus |
| 59 | - One 512 MB NAND flash with ECC support |
| 60 | - PromJet Port |
| 61 | - FPGA connection |
| 62 | - USB 3.0 |
| 63 | - Three high speed USB 3.0 ports |
| 64 | - First USB 3.0 port configured as Host with Type-A connector |
| 65 | - The other two USB 3.0 ports configured as OTG with micro-AB connector |
| 66 | - SDHC port connects directly to an adapter card slot, featuring: |
| 67 | - Optional clock feedback paths, and optional high-speed voltage translation assistance |
| 68 | - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC |
| 69 | - eMMC memory devices |
| 70 | - DSPI: Onboard support for three SPI flash memory devices |
| 71 | - 4 I2C controllers |
| 72 | - One SATA onboard connectors |
| 73 | - UART |
| 74 | - Two 4-pin serial ports at up to 115.2 Kbit/s |
| 75 | - Two DB9 D-Type connectors supporting one Serial port each |
| 76 | - ARM JTAG support |
| 77 | |
| 78 | Memory map from core's view |
| 79 | ---------------------------- |
| 80 | Start Address End Address Description Size |
| 81 | 0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB |
| 82 | 0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB |
| 83 | 0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB |
| 84 | 0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB |
| 85 | 0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB |
| 86 | 0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB |
| 87 | 0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB |
| 88 | 0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB |
| 89 | 0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB |
| 90 | |
| 91 | Booting Options |
| 92 | --------------- |
| 93 | a) Promjet Boot |
| 94 | b) NOR boot |
| 95 | c) NAND boot |
| 96 | d) SD boot |