blob: 9b578b5f5ecf746881104961eea4015e5abf8210 [file] [log] [blame]
Stefan Roese5e4b3362005-08-22 17:51:53 +02001/*
2 * (C) Copyright 2002
3 * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <asm/processor.h>
26#include <asm/cache.h>
27
28#undef DEBUG_FLASH
29/*
30 * This file implements a Common Flash Interface (CFI) driver for U-Boot.
31 * The width of the port and the width of the chips are determined at initialization.
32 * These widths are used to calculate the address for access CFI data structures.
33 * It has been tested on an Intel Strataflash implementation.
34 *
35 * References
36 * JEDEC Standard JESD68 - Common Flash Interface (CFI)
37 * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
38 * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
39 * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
40 *
41 * TODO
42 * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
43 * Add support for other command sets Use the PRI and ALT to determine command set
44 * Verify erase and program timeouts.
45 */
46
47#define FLASH_CMD_CFI 0x98
48#define FLASH_CMD_READ_ID 0x90
49#define FLASH_CMD_RESET 0xff
50#define FLASH_CMD_BLOCK_ERASE 0x20
51#define FLASH_CMD_ERASE_CONFIRM 0xD0
52#define FLASH_CMD_WRITE 0x40
53#define FLASH_CMD_PROTECT 0x60
54#define FLASH_CMD_PROTECT_SET 0x01
55#define FLASH_CMD_PROTECT_CLEAR 0xD0
56#define FLASH_CMD_CLEAR_STATUS 0x50
57#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
58#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
59
60#define FLASH_STATUS_DONE 0x80
61#define FLASH_STATUS_ESS 0x40
62#define FLASH_STATUS_ECLBS 0x20
63#define FLASH_STATUS_PSLBS 0x10
64#define FLASH_STATUS_VPENS 0x08
65#define FLASH_STATUS_PSS 0x04
66#define FLASH_STATUS_DPS 0x02
67#define FLASH_STATUS_R 0x01
68#define FLASH_STATUS_PROTECT 0x01
69
70#define FLASH_OFFSET_CFI 0x55
71#define FLASH_OFFSET_CFI_RESP 0x10
72#define FLASH_OFFSET_WTOUT 0x1F
73#define FLASH_OFFSET_WBTOUT 0x20
74#define FLASH_OFFSET_ETOUT 0x21
75#define FLASH_OFFSET_CETOUT 0x22
76#define FLASH_OFFSET_WMAX_TOUT 0x23
77#define FLASH_OFFSET_WBMAX_TOUT 0x24
78#define FLASH_OFFSET_EMAX_TOUT 0x25
79#define FLASH_OFFSET_CEMAX_TOUT 0x26
80#define FLASH_OFFSET_SIZE 0x27
81#define FLASH_OFFSET_INTERFACE 0x28
82#define FLASH_OFFSET_BUFFER_SIZE 0x2A
83#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
84#define FLASH_OFFSET_ERASE_REGIONS 0x2D
85#define FLASH_OFFSET_PROTECT 0x02
86#define FLASH_OFFSET_USER_PROTECTION 0x85
87#define FLASH_OFFSET_INTEL_PROTECTION 0x81
88
89#define FLASH_MAN_CFI 0x01000000
90
91typedef union {
92 unsigned char c;
93 unsigned short w;
94 unsigned long l;
95} cfiword_t;
96
97typedef union {
98 unsigned char *cp;
99 unsigned short *wp;
100 unsigned long *lp;
101} cfiptr_t;
102
103#define NUM_ERASE_REGIONS 4
104
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
Stefan Roese5e4b3362005-08-22 17:51:53 +0200106
107/*-----------------------------------------------------------------------
108 * Functions
109 */
110
111static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c);
112static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf);
113static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
114 uchar cmd);
115static int flash_isequal(flash_info_t * info, int sect, uchar offset,
116 uchar cmd);
117static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
118static int flash_detect_cfi(flash_info_t * info);
119static ulong flash_get_size(ulong base, int banknum);
120static int flash_write_cfiword(flash_info_t * info, ulong dest,
121 cfiword_t cword);
122static int flash_full_status_check(flash_info_t * info, ulong sector,
123 ulong tout, char *prompt);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Stefan Roese5e4b3362005-08-22 17:51:53 +0200125static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
126 int len);
127#endif
128/*-----------------------------------------------------------------------
129 * create an address based on the offset and the port width
130 */
131inline uchar *flash_make_addr(flash_info_t * info, int sect, int offset)
132{
133 return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
134}
135
136/*-----------------------------------------------------------------------
137 * read a character at a port width address
138 */
139inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
140{
141 uchar *cp;
142 cp = flash_make_addr(info, 0, offset);
143 return (cp[info->portwidth - 1]);
144}
145
146/*-----------------------------------------------------------------------
147 * read a short word by swapping for ppc format.
148 */
149ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
150{
151 uchar *addr;
152
153 addr = flash_make_addr(info, sect, offset);
154 return ((addr[(2 * info->portwidth) - 1] << 8) |
155 addr[info->portwidth - 1]);
156
157}
158
159/*-----------------------------------------------------------------------
160 * read a long word by picking the least significant byte of each maiximum
161 * port size word. Swap for ppc format.
162 */
163ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
164{
165 uchar *addr;
166
167 addr = flash_make_addr(info, sect, offset);
168 return ((addr[(2 * info->portwidth) - 1] << 24) |
169 (addr[(info->portwidth) - 1] << 16) |
170 (addr[(4 * info->portwidth) - 1] << 8) |
171 addr[(3 * info->portwidth) - 1]);
172
173}
174
175/*-----------------------------------------------------------------------
176 */
177unsigned long flash_init(void)
178{
179 unsigned long size;
180 int i;
181 unsigned long address;
182
183 /* The flash is positioned back to back, with the demultiplexing of the chip
184 * based on the A24 address line.
185 *
186 */
187
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188 address = CONFIG_SYS_FLASH_BASE;
Stefan Roese5e4b3362005-08-22 17:51:53 +0200189 size = 0;
190
191 /* Init: no FLASHes known */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
Stefan Roese5e4b3362005-08-22 17:51:53 +0200193 flash_info[i].flash_id = FLASH_UNKNOWN;
194 size += flash_info[i].size = flash_get_size(address, i);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195 address += CONFIG_SYS_FLASH_INCREMENT;
Stefan Roese5e4b3362005-08-22 17:51:53 +0200196 if (flash_info[i].flash_id == FLASH_UNKNOWN) {
197 printf
198 ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
199 i, flash_info[0].size, flash_info[i].size << 20);
200 }
201 }
202
203#if 0 /* test-only */
204 /* Monitor protection ON by default */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200205#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
Stefan Roese5e4b3362005-08-22 17:51:53 +0200206 for (i = 0;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200207 flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
Stefan Roese5e4b3362005-08-22 17:51:53 +0200208 i++)
209 (void)flash_real_protect(&flash_info[0], i, 1);
210#endif
211#endif
212
213 return (size);
214}
215
216/*-----------------------------------------------------------------------
217 */
218int flash_erase(flash_info_t * info, int s_first, int s_last)
219{
220 int rcode = 0;
221 int prot;
222 int sect;
223
224 if (info->flash_id != FLASH_MAN_CFI) {
225 printf("Can't erase unknown flash type - aborted\n");
226 return 1;
227 }
228 if ((s_first < 0) || (s_first > s_last)) {
229 printf("- no sectors to erase\n");
230 return 1;
231 }
232
233 prot = 0;
234 for (sect = s_first; sect <= s_last; ++sect) {
235 if (info->protect[sect]) {
236 prot++;
237 }
238 }
239 if (prot) {
240 printf("- Warning: %d protected sectors will not be erased!\n",
241 prot);
242 } else {
243 printf("\n");
244 }
245
246 for (sect = s_first; sect <= s_last; sect++) {
247 if (info->protect[sect] == 0) { /* not protected */
248 flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
249 flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
250 flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
251
252 if (flash_full_status_check
253 (info, sect, info->erase_blk_tout, "erase")) {
254 rcode = 1;
255 } else
256 printf(".");
257 }
258 }
259 printf(" done\n");
260 return rcode;
261}
262
263/*-----------------------------------------------------------------------
264 */
265void flash_print_info(flash_info_t * info)
266{
267 int i;
268
269 if (info->flash_id != FLASH_MAN_CFI) {
270 printf("missing or unknown FLASH type\n");
271 return;
272 }
273
274 printf("CFI conformant FLASH (%d x %d)",
275 (info->portwidth << 3), (info->chipwidth << 3));
276 printf(" Size: %ld MB in %d Sectors\n",
277 info->size >> 20, info->sector_count);
278 printf
279 (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
280 info->erase_blk_tout, info->write_tout, info->buffer_write_tout,
281 info->buffer_size);
282
283 printf(" Sector Start Addresses:");
284 for (i = 0; i < info->sector_count; ++i) {
285 if ((i % 5) == 0)
286 printf("\n");
287 printf(" %08lX%5s",
288 info->start[i], info->protect[i] ? " (RO)" : " ");
289 }
290 printf("\n");
291 return;
292}
293
294/*-----------------------------------------------------------------------
295 * Copy memory to flash, returns:
296 * 0 - OK
297 * 1 - write timeout
298 * 2 - Flash not erased
299 */
300int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
301{
302 ulong wp;
303 ulong cp;
304 int aln;
305 cfiword_t cword;
306 int i, rc;
307
308 /* get lower aligned address */
309 wp = (addr & ~(info->portwidth - 1));
310
311 /* handle unaligned start */
312 if ((aln = addr - wp) != 0) {
313 cword.l = 0;
314 cp = wp;
315 for (i = 0; i < aln; ++i, ++cp)
316 flash_add_byte(info, &cword, (*(uchar *) cp));
317
318 for (; (i < info->portwidth) && (cnt > 0); i++) {
319 flash_add_byte(info, &cword, *src++);
320 cnt--;
321 cp++;
322 }
323 for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
324 flash_add_byte(info, &cword, (*(uchar *) cp));
325 if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
326 return rc;
327 wp = cp;
328 }
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200329#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Stefan Roese5e4b3362005-08-22 17:51:53 +0200330 while (cnt >= info->portwidth) {
331 i = info->buffer_size > cnt ? cnt : info->buffer_size;
332 if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
333 return rc;
334 wp += i;
335 src += i;
336 cnt -= i;
337 }
338#else
339 /* handle the aligned part */
340 while (cnt >= info->portwidth) {
341 cword.l = 0;
342 for (i = 0; i < info->portwidth; i++) {
343 flash_add_byte(info, &cword, *src++);
344 }
345 if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
346 return rc;
347 wp += info->portwidth;
348 cnt -= info->portwidth;
349 }
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200350#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
Stefan Roese5e4b3362005-08-22 17:51:53 +0200351 if (cnt == 0) {
352 return (0);
353 }
354
355 /*
356 * handle unaligned tail bytes
357 */
358 cword.l = 0;
359 for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
360 flash_add_byte(info, &cword, *src++);
361 --cnt;
362 }
363 for (; i < info->portwidth; ++i, ++cp) {
364 flash_add_byte(info, &cword, (*(uchar *) cp));
365 }
366
367 return flash_write_cfiword(info, wp, cword);
368}
369
370/*-----------------------------------------------------------------------
371 */
372int flash_real_protect(flash_info_t * info, long sector, int prot)
373{
374 int retcode = 0;
375
376 flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
377 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
378 if (prot)
379 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
380 else
381 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
382
383 if ((retcode =
384 flash_full_status_check(info, sector, info->erase_blk_tout,
385 prot ? "protect" : "unprotect")) == 0) {
386
387 info->protect[sector] = prot;
388 /* Intel's unprotect unprotects all locking */
389 if (prot == 0) {
390 int i;
391 for (i = 0; i < info->sector_count; i++) {
392 if (info->protect[i])
393 flash_real_protect(info, i, 1);
394 }
395 }
396 }
397
398 return retcode;
399}
400
401/*-----------------------------------------------------------------------
402 * wait for XSR.7 to be set. Time out with an error if it does not.
403 * This routine does not set the flash to read-array mode.
404 */
405static int flash_status_check(flash_info_t * info, ulong sector, ulong tout,
406 char *prompt)
407{
408 ulong start;
409
410 /* Wait for command completion */
411 start = get_timer(0);
412 while (!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
413 if (get_timer(start) > info->erase_blk_tout) {
414 printf("Flash %s timeout at address %lx\n", prompt,
415 info->start[sector]);
416 flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
417 return ERR_TIMOUT;
418 }
419 }
420 return ERR_OK;
421}
422
423/*-----------------------------------------------------------------------
424 * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
425 * This routine sets the flash to read-array mode.
426 */
427static int flash_full_status_check(flash_info_t * info, ulong sector,
428 ulong tout, char *prompt)
429{
430 int retcode;
431 retcode = flash_status_check(info, sector, tout, prompt);
432 if ((retcode == ERR_OK)
433 && !flash_isequal(info, sector, 0, FLASH_STATUS_DONE)) {
434 retcode = ERR_INVAL;
435 printf("Flash %s error at address %lx\n", prompt,
436 info->start[sector]);
437 if (flash_isset
438 (info, sector, 0,
439 FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
440 printf("Command Sequence Error.\n");
441 } else if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)) {
442 printf("Block Erase Error.\n");
443 retcode = ERR_NOT_ERASED;
444 } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
445 printf("Locking Error\n");
446 }
447 if (flash_isset(info, sector, 0, FLASH_STATUS_DPS)) {
448 printf("Block locked.\n");
449 retcode = ERR_PROTECTED;
450 }
451 if (flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
452 printf("Vpp Low Error.\n");
453 }
454 flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
455 return retcode;
456}
457
458/*-----------------------------------------------------------------------
459 */
460static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c)
461{
462 switch (info->portwidth) {
463 case FLASH_CFI_8BIT:
464 cword->c = c;
465 break;
466 case FLASH_CFI_16BIT:
467 cword->w = (cword->w << 8) | c;
468 break;
469 case FLASH_CFI_32BIT:
470 cword->l = (cword->l << 8) | c;
471 }
472}
473
474/*-----------------------------------------------------------------------
475 * make a proper sized command based on the port and chip widths
476 */
477static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf)
478{
479 int i;
480 uchar *cp = (uchar *) cmdbuf;
481 for (i = 0; i < info->portwidth; i++)
482 *cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
483}
484
485/*
486 * Write a proper sized command to the correct address
487 */
488static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
489 uchar cmd)
490{
491
492 volatile cfiptr_t addr;
493 cfiword_t cword;
494 addr.cp = flash_make_addr(info, sect, offset);
495 flash_make_cmd(info, cmd, &cword);
496 switch (info->portwidth) {
497 case FLASH_CFI_8BIT:
498 *addr.cp = cword.c;
499 break;
500 case FLASH_CFI_16BIT:
501 *addr.wp = cword.w;
502 break;
503 case FLASH_CFI_32BIT:
504 *addr.lp = cword.l;
505 break;
506 }
507}
508
509/*-----------------------------------------------------------------------
510 */
511static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
512{
513 cfiptr_t cptr;
514 cfiword_t cword;
515 int retval;
516 cptr.cp = flash_make_addr(info, sect, offset);
517 flash_make_cmd(info, cmd, &cword);
518 switch (info->portwidth) {
519 case FLASH_CFI_8BIT:
520 retval = (cptr.cp[0] == cword.c);
521 break;
522 case FLASH_CFI_16BIT:
523 retval = (cptr.wp[0] == cword.w);
524 break;
525 case FLASH_CFI_32BIT:
526 retval = (cptr.lp[0] == cword.l);
527 break;
528 default:
529 retval = 0;
530 break;
531 }
532 return retval;
533}
534
535/*-----------------------------------------------------------------------
536 */
537static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
538{
539 cfiptr_t cptr;
540 cfiword_t cword;
541 int retval;
542 cptr.cp = flash_make_addr(info, sect, offset);
543 flash_make_cmd(info, cmd, &cword);
544 switch (info->portwidth) {
545 case FLASH_CFI_8BIT:
546 retval = ((cptr.cp[0] & cword.c) == cword.c);
547 break;
548 case FLASH_CFI_16BIT:
549 retval = ((cptr.wp[0] & cword.w) == cword.w);
550 break;
551 case FLASH_CFI_32BIT:
552 retval = ((cptr.lp[0] & cword.l) == cword.l);
553 break;
554 default:
555 retval = 0;
556 break;
557 }
558 return retval;
559}
560
561/*-----------------------------------------------------------------------
562 * detect if flash is compatible with the Common Flash Interface (CFI)
563 * http://www.jedec.org/download/search/jesd68.pdf
564 *
565 */
566static int flash_detect_cfi(flash_info_t * info)
567{
568
569 for (info->portwidth = FLASH_CFI_8BIT;
570 info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) {
571 for (info->chipwidth = FLASH_CFI_BY8;
572 info->chipwidth <= info->portwidth;
573 info->chipwidth <<= 1) {
574 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
575 flash_write_cmd(info, 0, FLASH_OFFSET_CFI,
576 FLASH_CMD_CFI);
577 if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
578 && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1,
579 'R')
580 && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2,
581 'Y'))
582 return 1;
583 }
584 }
585 return 0;
586}
587
588/*
589 * The following code cannot be run from FLASH!
590 *
591 */
592static ulong flash_get_size(ulong base, int banknum)
593{
594 flash_info_t *info = &flash_info[banknum];
595 int i, j;
596 int sect_cnt;
597 unsigned long sector;
598 unsigned long tmp;
599 int size_ratio = 0;
600 uchar num_erase_regions;
601 int erase_region_size;
602 int erase_region_count;
603
604 info->start[0] = base;
605#if 0
606 invalidate_dcache_range(base, base + 0x400);
607#endif
608 if (flash_detect_cfi(info)) {
609
610 size_ratio = info->portwidth / info->chipwidth;
611 num_erase_regions =
612 flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
613
614 sect_cnt = 0;
615 sector = base;
616 for (i = 0; i < num_erase_regions; i++) {
617 if (i > NUM_ERASE_REGIONS) {
618 printf("%d erase regions found, only %d used\n",
619 num_erase_regions, NUM_ERASE_REGIONS);
620 break;
621 }
622 tmp =
623 flash_read_long(info, 0,
624 FLASH_OFFSET_ERASE_REGIONS);
625 erase_region_size =
626 (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
627 tmp >>= 16;
628 erase_region_count = (tmp & 0xffff) + 1;
629 for (j = 0; j < erase_region_count; j++) {
630 info->start[sect_cnt] = sector;
631 sector += (erase_region_size * size_ratio);
632 info->protect[sect_cnt] =
633 flash_isset(info, sect_cnt,
634 FLASH_OFFSET_PROTECT,
635 FLASH_STATUS_PROTECT);
636 sect_cnt++;
637 }
638 }
639
640 info->sector_count = sect_cnt;
641 /* multiply the size by the number of chips */
642 info->size =
643 (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) *
644 size_ratio;
645 info->buffer_size =
646 (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
647 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
648 info->erase_blk_tout =
649 (tmp *
650 (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
651 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
652 info->buffer_write_tout =
653 (tmp *
654 (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
655 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
656 info->write_tout =
657 (tmp *
658 (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT))) /
659 1000;
660 info->flash_id = FLASH_MAN_CFI;
661 }
662
663 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
664#ifdef DEBUG_FLASH
665 printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
666#endif
667#ifdef DEBUG_FLASH
668 printf("found %d erase regions\n", num_erase_regions);
669#endif
670#ifdef DEBUG_FLASH
671 printf("size=%08x sectors=%08x \n", info->size, info->sector_count);
672#endif
673 return (info->size);
674}
675
676/*-----------------------------------------------------------------------
677 */
678static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
679{
680
681 cfiptr_t ctladdr;
682 cfiptr_t cptr;
683 int flag;
684
685 ctladdr.cp = flash_make_addr(info, 0, 0);
686 cptr.cp = (uchar *) dest;
687
688 /* Check if Flash is (sufficiently) erased */
689 switch (info->portwidth) {
690 case FLASH_CFI_8BIT:
691 flag = ((cptr.cp[0] & cword.c) == cword.c);
692 break;
693 case FLASH_CFI_16BIT:
694 flag = ((cptr.wp[0] & cword.w) == cword.w);
695 break;
696 case FLASH_CFI_32BIT:
697 flag = ((cptr.lp[0] & cword.l) == cword.l);
698 break;
699 default:
700 return 2;
701 }
702 if (!flag)
703 return 2;
704
705 /* Disable interrupts which might cause a timeout here */
706 flag = disable_interrupts();
707
708 flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
709 flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
710
711 switch (info->portwidth) {
712 case FLASH_CFI_8BIT:
713 cptr.cp[0] = cword.c;
714 break;
715 case FLASH_CFI_16BIT:
716 cptr.wp[0] = cword.w;
717 break;
718 case FLASH_CFI_32BIT:
719 cptr.lp[0] = cword.l;
720 break;
721 }
722
723 /* re-enable interrupts if necessary */
724 if (flag)
725 enable_interrupts();
726
727 return flash_full_status_check(info, 0, info->write_tout, "write");
728}
729
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200730#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Stefan Roese5e4b3362005-08-22 17:51:53 +0200731
732/* loop through the sectors from the highest address
733 * when the passed address is greater or equal to the sector address
734 * we have a match
735 */
736static int find_sector(flash_info_t * info, ulong addr)
737{
738 int sector;
739 for (sector = info->sector_count - 1; sector >= 0; sector--) {
740 if (addr >= info->start[sector])
741 break;
742 }
743 return sector;
744}
745
746static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
747 int len)
748{
749
750 int sector;
751 int cnt;
752 int retcode;
753 volatile cfiptr_t src;
754 volatile cfiptr_t dst;
755
756 src.cp = cp;
757 dst.cp = (uchar *) dest;
758 sector = find_sector(info, dest);
759 flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
760 flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
761 if ((retcode = flash_status_check(info, sector, info->buffer_write_tout,
762 "write to buffer")) == ERR_OK) {
763 switch (info->portwidth) {
764 case FLASH_CFI_8BIT:
765 cnt = len;
766 break;
767 case FLASH_CFI_16BIT:
768 cnt = len >> 1;
769 break;
770 case FLASH_CFI_32BIT:
771 cnt = len >> 2;
772 break;
773 default:
774 return ERR_INVAL;
775 break;
776 }
777 flash_write_cmd(info, sector, 0, (uchar) cnt - 1);
778 while (cnt-- > 0) {
779 switch (info->portwidth) {
780 case FLASH_CFI_8BIT:
781 *dst.cp++ = *src.cp++;
782 break;
783 case FLASH_CFI_16BIT:
784 *dst.wp++ = *src.wp++;
785 break;
786 case FLASH_CFI_32BIT:
787 *dst.lp++ = *src.lp++;
788 break;
789 default:
790 return ERR_INVAL;
791 break;
792 }
793 }
794 flash_write_cmd(info, sector, 0,
795 FLASH_CMD_WRITE_BUFFER_CONFIRM);
796 retcode =
797 flash_full_status_check(info, sector,
798 info->buffer_write_tout,
799 "buffer write");
800 }
801 flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
802 return retcode;
803}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200804#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */