blob: e09dbc3df0d2fddc5b09267ac87f765b644f6b5a [file] [log] [blame]
Stefan Roese029faf32010-04-27 11:37:28 +02001/*
2 * (C) Copyright 2009-2010
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 */
24
25#include <common.h>
Stefan Roeseb36df562010-09-09 19:18:00 +020026#include <asm/ppc4xx.h>
Stefan Roese029faf32010-04-27 11:37:28 +020027#include <i2c.h>
28#include <libfdt.h>
29#include <fdt_support.h>
30#include <netdev.h>
31#include <asm/processor.h>
32#include <asm/io.h>
Stefan Roese09887762010-09-16 14:30:37 +020033#include <asm/ppc4xx-gpio.h>
Stefan Roese029faf32010-04-27 11:37:28 +020034#include <asm/4xx_pcie.h>
35#include <asm/errno.h>
36#include <asm/mmu.h>
37
38DECLARE_GLOBAL_DATA_PTR;
39
40int board_early_init_f(void)
41{
42 unsigned long mfr;
43
44 /*
45 * Interrupt controller setup for the ICON 440SPe board.
46 *
47 *--------------------------------------------------------------------
48 * IRQ | Source | Pol. | Sensi.| Crit.
49 *--------+-----------------------------------+-------+-------+-------
50 * IRQ 00 | UART0 | High | Level | Non
51 * IRQ 01 | UART1 | High | Level | Non
52 * IRQ 02 | IIC0 | High | Level | Non
53 * IRQ 03 | IIC1 | High | Level | Non
54 * IRQ 04 | PCI0X0 MSG IN | High | Level | Non
55 * IRQ 05 | PCI0X0 CMD Write | High | Level | Non
56 * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non
57 * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non
58 * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non
59 * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non
60 * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non
61 * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit
62 * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non
63 * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non
64 * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non
65 * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non
66 * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non
67 * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit
68 * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non
69 * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non
70 * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non
71 * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non
72 * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non
73 * IRQ 23 | I2O Inbound Doorbell | High | Level | Non
74 * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non
75 * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non
76 * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non
77 * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non
78 * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non
79 * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non
80 * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non
81 * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit.
82 *--------------------------------------------------------------------
83 * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non
84 * IRQ 33 | MAL Serr | High | Level | Non
85 * IRQ 34 | MAL Txde | High | Level | Non
86 * IRQ 35 | MAL Rxde | High | Level | Non
87 * IRQ 36 | DMC CE or DMC UE | High | Level | Non
88 * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non
89 * IRQ 38 | MAL TX EOB | High | Level | Non
90 * IRQ 39 | MAL RX EOB | High | Level | Non
91 * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non
92 * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non
93 * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non
94 * IRQ 43 | L2 Cache | Risin | Edge | Non
95 * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non
96 * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non
97 * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non
98 * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non
99 * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non
100 * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non
101 * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non
102 * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non
103 * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non
104 * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non
105 * IRQ 54 | DMA Error | High | Level | Non
106 * IRQ 55 | DMA I2O Error | High | Level | Non
107 * IRQ 56 | Serial ROM | High | Level | Non
108 * IRQ 57 | PCIX0 Error | High | Edge | Non
109 * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non
110 * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non
111 * IRQ 60 | EMAC0 Interrupt | High | Level | Non
112 * IRQ 61 | EMAC0 Wake-up | High | Level | Non
113 * IRQ 62 | Reserved | High | Level | Non
114 * IRQ 63 | XOR | High | Level | Non
115 *--------------------------------------------------------------------
116 * IRQ 64 | PE0 AL | High | Level | Non
117 * IRQ 65 | PE0 VPD Access | Risin | Edge | Non
118 * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non
119 * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non
120 * IRQ 68 | PE0 TCR | High | Level | Non
121 * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non
122 * IRQ 70 | PE0 DCR Error | High | Level | Non
123 * IRQ 71 | Reserved | N/A | N/A | Non
124 * IRQ 72 | PE1 AL | High | Level | Non
125 * IRQ 73 | PE1 VPD Access | Risin | Edge | Non
126 * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non
127 * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non
128 * IRQ 76 | PE1 TCR | High | Level | Non
129 * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non
130 * IRQ 78 | PE1 DCR Error | High | Level | Non
131 * IRQ 79 | Reserved | N/A | N/A | Non
132 * IRQ 80 | PE2 AL | High | Level | Non
133 * IRQ 81 | PE2 VPD Access | Risin | Edge | Non
134 * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non
135 * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non
136 * IRQ 84 | PE2 TCR | High | Level | Non
137 * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non
138 * IRQ 86 | PE2 DCR Error | High | Level | Non
139 * IRQ 87 | Reserved | N/A | N/A | Non
140 * IRQ 88 | External IRQ(5) | Progr | Progr | Non
141 * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non
142 * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non
143 * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non
144 * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non
145 * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non
146 * IRQ 94 | Reserved | N/A | N/A | Non
147 * IRQ 95 | Reserved | N/A | N/A | Non
148 *--------------------------------------------------------------------
149 * IRQ 96 | PE0 INTA | High | Level | Non
150 * IRQ 97 | PE0 INTB | High | Level | Non
151 * IRQ 98 | PE0 INTC | High | Level | Non
152 * IRQ 99 | PE0 INTD | High | Level | Non
153 * IRQ 100| PE1 INTA | High | Level | Non
154 * IRQ 101| PE1 INTB | High | Level | Non
155 * IRQ 102| PE1 INTC | High | Level | Non
156 * IRQ 103| PE1 INTD | High | Level | Non
157 * IRQ 104| PE2 INTA | High | Level | Non
158 * IRQ 105| PE2 INTB | High | Level | Non
159 * IRQ 106| PE2 INTC | High | Level | Non
160 * IRQ 107| PE2 INTD | Risin | Edge | Non
161 * IRQ 108| PCI Express MSI Level 4 | Risin | Edge | Non
162 * IRQ 109| PCI Express MSI Level 5 | Risin | Edge | Non
163 * IRQ 110| PCI Express MSI Level 6 | Risin | Edge | Non
164 * IRQ 111| PCI Express MSI Level 7 | Risin | Edge | Non
165 * IRQ 116| PCI Express MSI Level 12 | Risin | Edge | Non
166 * IRQ 112| PCI Express MSI Level 8 | Risin | Edge | Non
167 * IRQ 113| PCI Express MSI Level 9 | Risin | Edge | Non
168 * IRQ 114| PCI Express MSI Level 10 | Risin | Edge | Non
169 * IRQ 115| PCI Express MSI Level 11 | Risin | Edge | Non
170 * IRQ 117| PCI Express MSI Level 13 | Risin | Edge | Non
171 * IRQ 118| PCI Express MSI Level 14 | Risin | Edge | Non
172 * IRQ 119| PCI Express MSI Level 15 | Risin | Edge | Non
173 * IRQ 120| PCI Express MSI Level 16 | Risin | Edge | Non
174 * IRQ 121| PCI Express MSI Level 17 | Risin | Edge | Non
175 * IRQ 122| PCI Express MSI Level 18 | Risin | Edge | Non
176 * IRQ 123| PCI Express MSI Level 19 | Risin | Edge | Non
177 * IRQ 124| PCI Express MSI Level 20 | Risin | Edge | Non
178 * IRQ 125| PCI Express MSI Level 21 | Risin | Edge | Non
179 * IRQ 126| PCI Express MSI Level 22 | Risin | Edge | Non
180 * IRQ 127| PCI Express MSI Level 23 | Risin | Edge | Non
181 */
182
183 /*
184 * Put UICs in PowerPC 440SPe mode.
185 * Initialise UIC registers. Clear all interrupts. Disable all
186 * interrupts. Set critical interrupt values. Set interrupt polarities.
187 * Set interrupt trigger levels. Make bit 0 High priority. Clear all
188 * interrupts again.
189 */
190 mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
191 mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
192 mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical IRQs */
193 mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/
194 mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
195 mtdcr(UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
196 mtdcr(UIC3SR, 0x00000000); /* clear all interrupts*/
197 mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts*/
198
199 mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
200 mtdcr(UIC2ER, 0x00000000); /* disable all interrupts*/
201 mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical IRQs */
202 mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/
203 mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
204 mtdcr(UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
205 mtdcr(UIC2SR, 0x00000000); /* clear all interrupts */
206 mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
207
208 mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts*/
209 mtdcr(UIC1ER, 0x00000000); /* disable all interrupts*/
210 mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical IRQs */
211 mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
212 mtdcr(UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/
213 mtdcr(UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
214 mtdcr(UIC1SR, 0x00000000); /* clear all interrupts*/
215 mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts*/
216
217 mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
218 mtdcr(UIC0ER, 0x00000000); /* disable all int. excepted cascade */
219 mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical IRQs */
220 mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/
221 mtdcr(UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
222 mtdcr(UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
223 mtdcr(UIC0SR, 0x00000000); /* clear all interrupts*/
224 mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts*/
225
226 mfsdr(SDR0_MFR, mfr);
227 mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
228 mtsdr(SDR0_MFR, mfr);
229
230 mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
231
232 out_be32((void *)GPIO0_OR, CONFIG_SYS_GPIO_OR);
233 out_be32((void *)GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
234 out_be32((void *)GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
235
236 return 0;
237}
238
239int board_early_init_r(void)
240{
241 /*
242 * ICON has 64MBytes of NOR FLASH (Spansion 29GL512), but the
243 * boot EBC mapping only supports a maximum of 16MBytes
244 * (4.ff00.0000 - 4.ffff.ffff).
245 * To solve this problem, the FLASH has to get remapped to another
246 * EBC address which accepts bigger regions:
247 *
248 * 0xfc00.0000 -> 4.ec00.0000
249 */
250
251 /* Remap the NOR FLASH to 0xec00.0000 ... 0xefff.ffff */
252 mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
253
254 /* Remove TLB entry of boot EBC mapping */
255 remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
256
257 /* Add TLB entry for 0xfc00.0000 -> 0x4.ec00.0000 */
258 program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
259 CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
260
261 /*
262 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
263 * 0xfc00.0000 is possible
264 */
265
266 /*
267 * Clear potential errors resulting from auto-calibration.
268 * If not done, then we could get an interrupt later on when
269 * exceptions are enabled.
270 */
271 set_mcsr(get_mcsr());
272
273 return 0;
274}
275
276int checkboard(void)
277{
278 char *s = getenv("serial#");
279
280 printf("Board: ICON");
281 if (s != NULL) {
282 puts(", serial# ");
283 puts(s);
284 }
285 putc('\n');
286
287 return 0;
288}
289
290/*
291 * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
292 * board specific values.
293 *
294 * Tested successfully with the following SODIMM:
295 * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank)
296 *
297 * Tests with Micron MT4HTF6464HZ-667H1 showed problems in "cold" state,
298 * directly after power-up. Only after running for more than 10 minutes
299 * real stable auto-calibration windows could be found.
300 */
301u32 ddr_wrdtr(u32 default_val)
302{
303 return SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV;
304}
305
306u32 ddr_clktr(u32 default_val)
307{
308 return SDRAM_CLKTR_CLKP_180_DEG_ADV;
309}
310
311/*
312 * Override the weak default implementation and return the
313 * last PCIe slot number (max number - 1).
314 */
315int board_pcie_last(void)
316{
317 /* Only 2 PCIe ports used on ICON, so the last one is 1 */
318 return 1;
319}
Anatolij Gustschin86caca12010-05-26 10:38:59 +0200320
321/*
322 * Video
323 */
324#ifdef CONFIG_VIDEO_SM501
325#include <sm501.h>
326
327#define DISPLAY_WIDTH 640
328#define DISPLAY_HEIGHT 480
329
330static const SMI_REGS sm502_init_regs[] = {
331 {0x00004, 0x0},
332 {0x00040, 0x00021847},
333 {0x00044, 0x091a0a01}, /* 24 MHz pixclk */
334 {0x00054, 0x0},
335 {0x00048, 0x00021847},
336 {0x0004C, 0x091a0a01},
337 {0x00054, 0x1},
338 {0x80004, 0xc428bb17},
339 {0x8000C, 0x00000000},
340 {0x80010, 0x0a000a00},
341 {0x80014, 0x02800000},
342 {0x80018, 0x01e00000},
343 {0x8001C, 0x00000000},
344 {0x80020, 0x01e00280},
345 {0x80024, 0x02fa027f},
346 {0x80028, 0x004a0280},
347 {0x8002C, 0x020c01df},
348 {0x80030, 0x000201e7},
349 {0x80200, 0x00010000},
350 {0x00008, 0x20000000}, /* gpio29 is pwm0, LED_PWM */
351 {0x0000C, 0x3f000000}, /* gpio56 - gpio61 as flat panel data pins */
352 {0x10020, 0x25725728}, /* 20 kHz pwm0, 50 % duty cycle, disabled */
353 {0x80000, 0x0f010106}, /* vsync & hsync pos, disp on */
354 {0, 0}
355};
356
357/*
358 * Return a pointer to the register initialization table.
359 */
360const SMI_REGS *board_get_regs(void)
361{
362 return sm502_init_regs;
363}
364
365int board_get_width(void)
366{
367 return DISPLAY_WIDTH;
368}
369
370int board_get_height(void)
371{
372 return DISPLAY_HEIGHT;
373}
374
375#ifdef CONFIG_CONSOLE_EXTRA_INFO
376/*
377 * Return text to be printed besides the logo.
378 */
379void video_get_info_str(int line_number, char *info)
380{
381 if (line_number == 1)
382 strcpy(info, " Board: ICON");
383 else
384 info[0] = '\0';
385}
386#endif
387
388#endif /* CONFIG_VIDEO_SM501 */