blob: cc6087b339598d916dfd378f6daf8760f6d15fd4 [file] [log] [blame]
Grzegorz Bernacki5c4fa9b2009-03-17 10:06:40 +01001/*
2 * (C) Copyright 2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * (C) Copyright 2004
6 * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
7 *
8 * (C) Copyright 2005-2009
9 * Modified for InterControl digsyMTC MPC5200 board by
10 * Frank Bodammer, GCD Hard- & Software GmbH,
11 * frank.bodammer@gcd-solutions.de
12 *
13 * (C) Copyright 2009
14 * Grzegorz Bernacki, Semihalf, gjb@semihalf.com
15 *
16 * See file CREDITS for list of people who contributed to this
17 * project.
18 *
19 * This program is free software; you can redistribute it and/or
20 * modify it under the terms of the GNU General Public License as
21 * published by the Free Software Foundation; either version 2 of
22 * the License, or (at your option) any later version.
23 *
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 *
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
32 * MA 02111-1307 USA
33 */
34
35#include <common.h>
36#include <mpc5xxx.h>
37#include <net.h>
38#include <pci.h>
39#include <asm/processor.h>
40#include <asm/io.h>
41#include "eeprom.h"
42#include "is42s16800a-7t.h"
43
44DECLARE_GLOBAL_DATA_PTR;
45
46extern int usb_cpu_init(void);
47
48#ifndef CONFIG_SYS_RAMBOOT
49static void sdram_start(int hi_addr)
50{
51 long hi_addr_bit = hi_addr ? 0x01000000 : 0;
52 long control = SDRAM_CONTROL | hi_addr_bit;
53
54 /* unlock mode register */
55 out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
56
57 /* precharge all banks */
58 out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
59
60 /* auto refresh */
61 out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
62
63 /* set mode register */
64 out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
65
66 /* normal operation */
67 out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
68}
69#endif
70
71/*
72 * ATTENTION: Although partially referenced initdram does NOT make real use
73 * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
74 * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
75 */
76
77phys_size_t initdram(int board_type)
78{
79 ulong dramsize = 0;
80 ulong dramsize2 = 0;
81 uint svr, pvr;
82#ifndef CONFIG_SYS_RAMBOOT
83 ulong test1, test2;
84
85 /* setup SDRAM chip selects */
86 out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */
87 out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
88
89 /* setup config registers */
90 out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
91 out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
92
93 /* find RAM size using SDRAM CS0 only */
94 sdram_start(0);
95 test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
96 sdram_start(1);
97 test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
98 if (test1 > test2) {
99 sdram_start(0);
100 dramsize = test1;
101 } else {
102 dramsize = test2;
103 }
104
105 /* memory smaller than 1MB is impossible */
106 if (dramsize < (1 << 20))
107 dramsize = 0;
108
109 /* set SDRAM CS0 size according to the amount of RAM found */
110 if (dramsize > 0) {
111 out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
112 (0x13 + __builtin_ffs(dramsize >> 20) - 1));
113 } else {
114 out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
115 }
116
117 /* let SDRAM CS1 start right after CS0 */
118 out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C);
119
120 /* find RAM size using SDRAM CS1 only */
121 test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
122 0x08000000);
123 dramsize2 = test1;
124
125 /* memory smaller than 1MB is impossible */
126 if (dramsize2 < (1 << 20))
127 dramsize2 = 0;
128
129 /* set SDRAM CS1 size according to the amount of RAM found */
130 if (dramsize2 > 0) {
131 out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize |
132 (0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
133 } else {
134 out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
135 }
136
137#else /* CONFIG_SYS_RAMBOOT */
138
139 /* retrieve size of memory connected to SDRAM CS0 */
140 dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
141 if (dramsize >= 0x13)
142 dramsize = (1 << (dramsize - 0x13)) << 20;
143 else
144 dramsize = 0;
145
146 /* retrieve size of memory connected to SDRAM CS1 */
147 dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
148 if (dramsize2 >= 0x13)
149 dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
150 else
151 dramsize2 = 0;
152
153#endif /* CONFIG_SYS_RAMBOOT */
154
155 /*
156 * On MPC5200B we need to set the special configuration delay in the
157 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
158 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
159 *
160 * "The SDelay should be written to a value of 0x00000004. It is
161 * required to account for changes caused by normal wafer processing
162 * parameters."
163 */
164 svr = get_svr();
165 pvr = get_pvr();
166 if ((SVR_MJREV(svr) >= 2) &&
167 (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
168 out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
169
170 return dramsize + dramsize2;
171}
172
173int checkboard(void)
174{
175 char *s = getenv("serial#");
176
177 puts ("Board: InterControl digsyMTC");
178 if (s != NULL) {
179 puts(", ");
180 puts(s);
181 }
182 putc('\n');
183
184 return 0;
185}
186
187int board_early_init_r(void)
188{
Grzegorz Bernackif1f66ed2009-06-12 11:33:53 +0200189#ifdef CONFIG_MPC52XX_SPI
190 struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt*)MPC5XXX_GPT;
191#endif
Grzegorz Bernacki5c4fa9b2009-03-17 10:06:40 +0100192 /*
193 * Now, when we are in RAM, enable flash write access for detection
194 * process. Note that CS_BOOT cannot be cleared when executing in
195 * flash.
196 */
197 /* disable CS_BOOT */
198 clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25));
199 /* enable CS1 */
200 setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17));
201 /* enable CS0 */
202 setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
203
204#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
205 /* Low level USB init, required for proper kernel operation */
206 usb_cpu_init();
207#endif
Grzegorz Bernackif1f66ed2009-06-12 11:33:53 +0200208#ifdef CONFIG_MPC52XX_SPI
209 /* GPT 6 Output Enable */
210 out_be32(&gpt[6].emsr, 0x00000034);
211 /* GPT 7 Output Enable */
212 out_be32(&gpt[7].emsr, 0x00000034);
213#endif
214
Grzegorz Bernacki5c4fa9b2009-03-17 10:06:40 +0100215 return (0);
216}
217
218void board_get_enetaddr (uchar * enet)
219{
220 ushort read = 0;
221 ushort addr_of_eth_addr = 0;
222 ushort len_sys = 0;
223 ushort len_sys_cfg = 0;
224
225 /* check identification word */
226 eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2);
227 if (read != EEPROM_IDENT)
228 return;
229
230 /* calculate offset of config area */
231 eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2);
232 eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG,
233 (uchar *)&len_sys_cfg, 2);
234 addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1;
235 if (addr_of_eth_addr >= EEPROM_LEN)
236 return;
237
238 eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6);
239}
240
241int misc_init_r(void)
242{
243 uchar enetaddr[6];
244
245 if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
246 board_get_enetaddr(enetaddr);
247 eth_setenv_enetaddr("ethaddr", enetaddr);
248 }
249
250 return 0;
251}
252
253#ifdef CONFIG_PCI
254static struct pci_controller hose;
255
256extern void pci_mpc5xxx_init(struct pci_controller *);
257
258void pci_init_board(void)
259{
260 pci_mpc5xxx_init(&hose);
261}
262#endif
263
264#ifdef CONFIG_CMD_IDE
265
266#ifdef CONFIG_IDE_RESET
267
268void init_ide_reset(void)
269{
270 debug ("init_ide_reset\n");
271
272 /* set gpio output value to 1 */
273 setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
274 /* open drain output */
275 setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
276 /* direction output */
277 setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
278 /* enable gpio */
279 setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
280
281}
282
283void ide_set_reset(int idereset)
284{
285 debug ("ide_reset(%d)\n", idereset);
286
287 /* set gpio output value to 0 */
288 clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
289 /* open drain output */
290 setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
291 /* direction output */
292 setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
293 /* enable gpio */
294 setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
295
296 udelay(10000);
297
298 /* set gpio output value to 1 */
299 setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
300 /* open drain output */
301 setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
302 /* direction output */
303 setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
304 /* enable gpio */
305 setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
306}
307#endif /* CONFIG_IDE_RESET */
308
309#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
310void ft_board_setup(void *blob, bd_t *bd)
311{
312 ft_cpu_setup(blob, bd);
313}
314#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
315
316#endif /* CONFIG_CMD_IDE */