blob: c2cf92494af39ae42139e85ffe61b839ddcb607a [file] [log] [blame]
Mateusz Kulikowski08592132016-03-31 23:12:32 +02001/*
2 * Clock drivers for Qualcomm APQ8016
3 *
4 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
5 *
6 * Based on Little Kernel driver, simplified
7 *
8 * SPDX-License-Identifier: BSD-3-Clause
9 */
10
11#include <common.h>
Stephen Warren135aa952016-06-17 09:44:00 -060012#include <clk-uclass.h>
Mateusz Kulikowski08592132016-03-31 23:12:32 +020013#include <dm.h>
14#include <errno.h>
15#include <asm/io.h>
16#include <linux/bitops.h>
17
18/* GPLL0 clock control registers */
19#define GPLL0_STATUS 0x2101C
20#define GPLL0_STATUS_ACTIVE BIT(17)
21
22#define APCS_GPLL_ENA_VOTE 0x45000
23#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
24
25/* vote reg for blsp1 clock */
26#define APCS_CLOCK_BRANCH_ENA_VOTE 0x45004
27#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10)
28
29/* SDC(n) clock control registers; n=1,2 */
30
31/* block control register */
32#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
33/* cmd */
34#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
35/* cfg */
36#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
37/* m */
38#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
39/* n */
40#define SDCC_N(n) ((n * 0x1000) + 0x41010)
41/* d */
42#define SDCC_D(n) ((n * 0x1000) + 0x41014)
43/* branch control */
44#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
45#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
46
47/* BLSP1 AHB clock (root clock for BLSP) */
48#define BLSP1_AHB_CBCR 0x1008
49
50/* Uart clock control registers */
51#define BLSP1_UART2_BCR 0x3028
52#define BLSP1_UART2_APPS_CBCR 0x302C
53#define BLSP1_UART2_APPS_CMD_RCGR 0x3034
54#define BLSP1_UART2_APPS_CFG_RCGR 0x3038
55#define BLSP1_UART2_APPS_M 0x303C
56#define BLSP1_UART2_APPS_N 0x3040
57#define BLSP1_UART2_APPS_D 0x3044
58
59/* CBCR register fields */
60#define CBCR_BRANCH_ENABLE_BIT BIT(0)
61#define CBCR_BRANCH_OFF_BIT BIT(31)
62
63struct msm_clk_priv {
64 phys_addr_t base;
65};
66
67/* Enable clock controlled by CBC soft macro */
68static void clk_enable_cbc(phys_addr_t cbcr)
69{
70 setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
71
72 while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
73 ;
74}
75
76/* clock has 800MHz */
77static void clk_enable_gpll0(phys_addr_t base)
78{
79 if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE)
80 return; /* clock already enabled */
81
82 setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0);
83
84 while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0)
85 ;
86}
87
88#define APPS_CMD_RGCR_UPDATE BIT(0)
89
90/* Update clock command via CMD_RGCR */
91static void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
92{
93 setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
94
95 /* Wait for frequency to be updated. */
96 while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
97 ;
98}
99
100struct bcr_regs {
101 uintptr_t cfg_rcgr;
102 uintptr_t cmd_rcgr;
103 uintptr_t M;
104 uintptr_t N;
105 uintptr_t D;
106};
107
108/* RCGR_CFG register fields */
109#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
110
111/* sources */
112#define CFG_CLK_SRC_CXO (0 << 8)
113#define CFG_CLK_SRC_GPLL0 (1 << 8)
114#define CFG_CLK_SRC_MASK (7 << 8)
115
116/* Mask for supported fields */
117#define CFG_MASK 0x3FFF
118
119#define CFG_DIVIDER_MASK 0x1F
120
121/* root set rate for clocks with half integer and MND divider */
122static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
123 int div, int m, int n, int source)
124{
125 uint32_t cfg;
126 /* M value for MND divider. */
127 uint32_t m_val = m;
128 /* NOT(N-M) value for MND divider. */
129 uint32_t n_val = ~((n)-(m)) * !!(n);
130 /* NOT 2D value for MND divider. */
131 uint32_t d_val = ~(n);
132
133 /* Program MND values */
134 writel(m_val, base + regs->M);
135 writel(n_val, base + regs->N);
136 writel(d_val, base + regs->D);
137
138 /* setup src select and divider */
139 cfg = readl(base + regs->cfg_rcgr);
140 cfg &= ~CFG_MASK;
141 cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
142
143 /* Set the divider; HW permits fraction dividers (+0.5), but
144 for simplicity, we will support integers only */
145 if (div)
146 cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
147
148 if (n_val)
149 cfg |= CFG_MODE_DUAL_EDGE;
150
151 writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
152
153 /* Inform h/w to start using the new config. */
154 clk_bcr_update(base + regs->cmd_rcgr);
155}
156
157static const struct bcr_regs sdc_regs[] = {
158 {
159 .cfg_rcgr = SDCC_CFG_RCGR(1),
160 .cmd_rcgr = SDCC_CMD_RCGR(1),
161 .M = SDCC_M(1),
162 .N = SDCC_N(1),
163 .D = SDCC_D(1),
164 },
165 {
166 .cfg_rcgr = SDCC_CFG_RCGR(2),
167 .cmd_rcgr = SDCC_CMD_RCGR(2),
168 .M = SDCC_M(2),
169 .N = SDCC_N(2),
170 .D = SDCC_D(2),
171 }
172};
173
174/* Init clock for SDHCI controller */
175static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
176{
177 int div = 8; /* 100MHz default */
178
179 if (rate == 200000000)
180 div = 4;
181
182 clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot));
183 /* 800Mhz/div, gpll0 */
184 clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
185 CFG_CLK_SRC_GPLL0);
186 clk_enable_gpll0(priv->base);
187 clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
188
189 return rate;
190}
191
192static const struct bcr_regs uart2_regs = {
193 .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,
194 .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,
195 .M = BLSP1_UART2_APPS_M,
196 .N = BLSP1_UART2_APPS_N,
197 .D = BLSP1_UART2_APPS_D,
198};
199
200/* Init UART clock, 115200 */
201static int clk_init_uart(struct msm_clk_priv *priv)
202{
203 /* Enable iface clk */
204 clk_enable_cbc(priv->base + BLSP1_AHB_CBCR);
205 /* 7372800 uart block clock @ GPLL0 */
206 clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
207 CFG_CLK_SRC_GPLL0);
208 clk_enable_gpll0(priv->base);
209 /* Enable core clk */
210 clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
211
212 return 0;
213}
214
Stephen Warren135aa952016-06-17 09:44:00 -0600215ulong msm_set_rate(struct clk *clk, ulong rate)
Mateusz Kulikowski08592132016-03-31 23:12:32 +0200216{
Stephen Warren135aa952016-06-17 09:44:00 -0600217 struct msm_clk_priv *priv = dev_get_priv(clk->dev);
Mateusz Kulikowski08592132016-03-31 23:12:32 +0200218
Stephen Warren135aa952016-06-17 09:44:00 -0600219 switch (clk->id) {
Mateusz Kulikowski08592132016-03-31 23:12:32 +0200220 case 0: /* SDC1 */
221 return clk_init_sdc(priv, 0, rate);
222 break;
223 case 1: /* SDC2 */
224 return clk_init_sdc(priv, 1, rate);
225 break;
226 case 4: /* UART2 */
227 return clk_init_uart(priv);
228 break;
229 default:
230 return 0;
231 }
232}
233
234static int msm_clk_probe(struct udevice *dev)
235{
236 struct msm_clk_priv *priv = dev_get_priv(dev);
237
238 priv->base = dev_get_addr(dev);
239 if (priv->base == FDT_ADDR_T_NONE)
240 return -EINVAL;
241
242 return 0;
243}
244
245static struct clk_ops msm_clk_ops = {
Stephen Warren135aa952016-06-17 09:44:00 -0600246 .set_rate = msm_set_rate,
Mateusz Kulikowski08592132016-03-31 23:12:32 +0200247};
248
249static const struct udevice_id msm_clk_ids[] = {
250 { .compatible = "qcom,gcc-msm8916" },
251 { .compatible = "qcom,gcc-apq8016" },
252 { }
253};
254
255U_BOOT_DRIVER(clk_msm) = {
256 .name = "clk_msm",
257 .id = UCLASS_CLK,
258 .of_match = msm_clk_ids,
259 .ops = &msm_clk_ops,
260 .priv_auto_alloc_size = sizeof(struct msm_clk_priv),
261 .probe = msm_clk_probe,
262};