blob: 8133fdc40eef8f902fec646c697d4846438ffb90 [file] [log] [blame]
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +02001/*
2 * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
3 *
4 * (C) Copyright 2006
5 * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <common.h>
27#include <asm/processor.h>
28#include <asm/immap_85xx.h>
29#include <asm/processor.h>
30#include <asm/mmu.h>
31#include <asm/io.h>
32#include <asm/errno.h>
33#include <linux/mtd/mtd.h>
34#include <linux/mtd/fsl_upm.h>
35#include <ioports.h>
36
37#include <nand.h>
38
39DECLARE_GLOBAL_DATA_PTR;
40
41extern uint get_lbc_clock (void);
42
43/* index of UPM RAM array run pattern for NAND command cycle */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020044#define CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS 0x08
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +020045
46/* index of UPM RAM array run pattern for NAND address cycle */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020047#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x10
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +020048
49/* Structure for table with supported UPM timings */
50struct upm_freq {
51 ulong freq;
52 const u32 *upm_patt;
53 uchar gpl4_disable;
54 uchar ehtr;
55 uchar ead;
56};
57
58/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
59
60/* UPM pattern for bus clock = 25 MHz */
61static const u32 upm_patt_25[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +020062 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +020063 /* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
64 /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
65
66 /* UPM Read Burst RAM array entry -> NAND Write CMD */
67 /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
68 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
69
70 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
71 /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
72 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
73
74 /* UPM Write Single RAM array entry -> NAND Write Data */
75 /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
76 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
77
78 /* UPM Write Burst RAM array entry -> unused */
79 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
80 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
81 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
82 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
83
84 /* UPM Refresh Timer RAM array entry -> unused */
85 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
86 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
87 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
88
89 /* UPM Exception RAM array entry -> unsused */
90 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
91};
92
93/* UPM pattern for bus clock = 33.3 MHz */
94static const u32 upm_patt_33[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +020095 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +020096 /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
97 /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
98
99 /* UPM Read Burst RAM array entry -> NAND Write CMD */
100 /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
101 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
102
103 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
104 /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
105 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
106
107 /* UPM Write Single RAM array entry -> NAND Write Data */
108 /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
109 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
110
111 /* UPM Write Burst RAM array entry -> unused */
112 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
113 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
114 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
115 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
116
117 /* UPM Refresh Timer RAM array entry -> unused */
118 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
119 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
120 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
121
122 /* UPM Exception RAM array entry -> unsused */
123 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
124};
125
126/* UPM pattern for bus clock = 41.7 MHz */
127static const u32 upm_patt_42[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200128 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200129 /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
130 /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
131
132 /* UPM Read Burst RAM array entry -> NAND Write CMD */
133 /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
134 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
135
136 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
137 /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
138 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
139
140 /* UPM Write Single RAM array entry -> NAND Write Data */
141 /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
142 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
143
144 /* UPM Write Burst RAM array entry -> unused */
145 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
146 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
147 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
148 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
149
150 /* UPM Refresh Timer RAM array entry -> unused */
151 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
152 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
153 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
154
155 /* UPM Exception RAM array entry -> unsused */
156 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
157};
158
159/* UPM pattern for bus clock = 50 MHz */
160static const u32 upm_patt_50[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200161 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200162 /* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
163 /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
164
165 /* UPM Read Burst RAM array entry -> NAND Write CMD */
166 /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
167 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
168
169 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
170 /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
171 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
172
173 /* UPM Write Single RAM array entry -> NAND Write Data */
174 /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
175 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
176
177 /* UPM Write Burst RAM array entry -> unused */
178 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
179 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
180 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
181 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
182
183 /* UPM Refresh Timer RAM array entry -> unused */
184 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
185 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
186 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
187
188 /* UPM Exception RAM array entry -> unsused */
189 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
190};
191
192/* UPM pattern for bus clock = 66.7 MHz */
193static const u32 upm_patt_67[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200194 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200195 /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
196 /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
197
198 /* UPM Read Burst RAM array entry -> NAND Write CMD */
199 /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
200 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
201
202 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
203 /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
204 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
205
206 /* UPM Write Single RAM array entry -> NAND Write Data */
207 /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
208 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
209
210 /* UPM Write Burst RAM array entry -> unused */
211 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
212 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
213 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
214 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
215
216 /* UPM Refresh Timer RAM array entry -> unused */
217 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
218 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
219 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
220
221 /* UPM Exception RAM array entry -> unsused */
222 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
223};
224
225/* UPM pattern for bus clock = 83.3 MHz */
226static const u32 upm_patt_83[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200227 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200228 /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
229 /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
230
231 /* UPM Read Burst RAM array entry -> NAND Write CMD */
232 /* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
233 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
234
235 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
236 /* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
237 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
238
239 /* UPM Write Single RAM array entry -> NAND Write Data */
240 /* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
241 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
242
243 /* UPM Write Burst RAM array entry -> unused */
244 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
245 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
246 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
247 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
248
249 /* UPM Refresh Timer RAM array entry -> unused */
250 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
251 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
252 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
253
254 /* UPM Exception RAM array entry -> unsused */
255 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
256};
257
258/* UPM pattern for bus clock = 100 MHz */
259static const u32 upm_patt_100[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200260 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200261 /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
262 /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
263
264 /* UPM Read Burst RAM array entry -> NAND Write CMD */
265 /* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
266 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
267
268 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
269 /* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
270 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
271
272 /* UPM Write Single RAM array entry -> NAND Write Data */
273 /* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
274 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
275
276 /* UPM Write Burst RAM array entry -> unused */
277 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
278 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
279 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
280 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
281
282 /* UPM Refresh Timer RAM array entry -> unused */
283 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
284 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
285 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
286
287 /* UPM Exception RAM array entry -> unsused */
288 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
289};
290
291/* UPM pattern for bus clock = 133.3 MHz */
292static const u32 upm_patt_133[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200293 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200294 /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
295 /* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
296
297 /* UPM Read Burst RAM array entry -> NAND Write CMD */
298 /* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
299 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
300
301 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
302 /* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
303 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
304
305 /* UPM Write Single RAM array entry -> NAND Write Data */
306 /* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
307 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
308
309 /* UPM Write Burst RAM array entry -> unused */
310 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
311 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
312 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
313 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
314
315 /* UPM Refresh Timer RAM array entry -> unused */
316 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
317 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
318 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
319
320 /* UPM Exception RAM array entry -> unsused */
321 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
322};
323
324/* UPM pattern for bus clock = 166.7 MHz */
325static const u32 upm_patt_167[] = {
Wolfgang Denke093a242008-06-28 23:34:37 +0200326 /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200327 /* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
328 /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
329
330 /* UPM Read Burst RAM array entry -> NAND Write CMD */
331 /* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
332 /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
333
334 /* UPM Read Burst RAM array entry -> NAND Write ADDR */
335 /* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
336 /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
337
338 /* UPM Write Single RAM array entry -> NAND Write Data */
339 /* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
340 /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
341
342 /* UPM Write Burst RAM array entry -> unused */
343 /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
344 /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
345 /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
346 /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
347
348 /* UPM Refresh Timer RAM array entry -> unused */
349 /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
350 /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
351 /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
352
353 /* UPM Exception RAM array entry -> unsused */
354 /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
355};
356
357/* Supported UPM timings */
358struct upm_freq upm_freq_table[] = {
359 /* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
360 {25000000, upm_patt_25, 1, 0, 0},
361 {33333333, upm_patt_33, 1, 0, 0},
362 {41666666, upm_patt_42, 1, 0, 0},
363 {50000000, upm_patt_50, 0, 0, 0},
364 {66666666, upm_patt_67, 0, 0, 0},
365 {83333333, upm_patt_83, 0, 0, 0},
366 {100000000, upm_patt_100, 0, 1, 1},
367 {133333333, upm_patt_133, 0, 1, 1},
368 {166666666, upm_patt_167, 0, 1, 1},
369};
370
371#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
372
373volatile const u32 *nand_upm_patt;
374
375/*
376 * write into UPMB ram
377 */
378static void upmb_write (u_char addr, ulong val)
379{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200380 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200381
382 out_be32 (&lbc->mdr, val);
383
384 clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
385 MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
386
387 /* dummy access to perform write */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200388 out_8 ((void __iomem *)CONFIG_SYS_NAND0_BASE, 0);
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200389
390 clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
391}
392
393/*
394 * Initialize UPM for NAND flash access.
395 */
396static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
397{
Andy Fleminge0c4fac2009-02-16 09:40:20 -0600398 uint i, j;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200399 uint or3 = CONFIG_SYS_OR3_PRELIM;
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200400 uint clock = get_lbc_clock ();
401
402 out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200403 out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM);
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200404
405 /*
406 * Search appropriate UPM table for bus clock.
407 * If the bus clock exceeds a tolerated value, take the UPM timing for
408 * the next higher supported frequency to ensure that access works
409 * (even the access may be slower then).
410 */
411 for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
412 ;
413
414 if (i >= UPM_FREQS)
415 /* no valid entry found */
416 /* take last entry with configuration for max. bus clock */
417 i--;
418
419 if (upm_freq_table[i].ehtr) {
420 /* EHTR must be set due to TQM8548 timing specification */
421 or3 |= OR_UPM_EHTR;
422 }
423 if (upm_freq_table[i].ead)
424 /* EAD must be set due to TQM8548 timing specification */
425 or3 |= OR_UPM_EAD;
426
427 out_be32 (&lbc->or3, or3);
428
429 /* Assign address of table */
430 nand_upm_patt = upm_freq_table[i].upm_patt;
431
Andy Fleminge0c4fac2009-02-16 09:40:20 -0600432 for (j = 0; j < 64; j++) {
433 upmb_write (j, *nand_upm_patt);
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200434 nand_upm_patt++;
435 }
436
437 /* Put UPM back to normal operation mode */
438 if (upm_freq_table[i].gpl4_disable)
439 /* GPL4 must be disabled according to timing specification */
440 out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
441
442 return;
443}
444
445static struct fsl_upm_nand fun = {
446 .width = 8,
447 .upm_cmd_offset = 0x08,
448 .upm_addr_offset = 0x10,
449 .chip_delay = NAND_BIG_DELAY_US,
450};
451
452void board_nand_select_device (struct nand_chip *nand, int chip)
453{
454}
455
456int board_nand_init (struct nand_chip *nand)
457{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200458 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
Wolfgang Grandegger1c2deff2008-06-05 13:12:09 +0200459
460 if (!nand_upm_patt)
461 nand_upm_setup (lbc);
462
463 fun.upm.io_addr = nand->IO_ADDR_R;
464 fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
465 fun.upm.mdr = (void __iomem *)&lbc->mdr;
466 fun.upm.mar = (void __iomem *)&lbc->mar;
467
468 return fsl_upm_nand_init (nand, &fun);
469}