| Felipe Balbi | 1e4ad74 | 2014-11-10 14:02:44 -0600 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2014 |
| 3 | * Texas Instruments Incorporated. |
| 4 | * Felipe Balbi <balbi@ti.com> |
| 5 | * |
| 6 | * Configuration settings for the TI Beagle x15 board. |
| 7 | * See ti_omap5_common.h for omap5 common settings. |
| 8 | * |
| 9 | * SPDX-License-Identifier: GPL-2.0+ |
| 10 | */ |
| 11 | |
| 12 | #ifndef __CONFIG_BEAGLE_X15_H |
| 13 | #define __CONFIG_BEAGLE_X15_H |
| 14 | |
| 15 | #define CONFIG_AM57XX |
| 16 | |
| 17 | #define CONFIG_NR_DRAM_BANKS 2 |
| 18 | |
| 19 | #define CONFIG_ENV_SIZE (64 << 10) |
| 20 | #define CONFIG_ENV_IS_IN_FAT |
| 21 | #define FAT_ENV_INTERFACE "mmc" |
| 22 | #define FAT_ENV_DEVICE_AND_PART "0:1" |
| 23 | #define FAT_ENV_FILE "uboot.env" |
| 24 | |
| 25 | #define CONFIG_CMD_SAVEENV |
| 26 | |
| 27 | #define CONSOLEDEV "ttyO2" |
| 28 | #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ |
| 29 | #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ |
| 30 | #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ |
| 31 | #define CONFIG_BAUDRATE 115200 |
| 32 | |
| 33 | #define CONFIG_SYS_OMAP_ABE_SYSCK |
| 34 | |
| 35 | /* Define the default GPT table for eMMC */ |
| 36 | #define PARTS_DEFAULT \ |
| 37 | "uuid_disk=${uuid_gpt_disk};" \ |
| 38 | "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" |
| 39 | |
| 40 | #include <configs/ti_omap5_common.h> |
| 41 | |
| 42 | /* Enhance our eMMC support / experience. */ |
| 43 | #define CONFIG_CMD_GPT |
| 44 | #define CONFIG_EFI_PARTITION |
| 45 | #define CONFIG_PARTITION_UUIDS |
| 46 | #define CONFIG_CMD_PART |
| 47 | |
| 48 | /* CPSW Ethernet */ |
| 49 | #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ |
| 50 | #define CONFIG_CMD_DHCP |
| 51 | #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ |
| 52 | #define CONFIG_BOOTP_DNS2 |
| 53 | #define CONFIG_BOOTP_SEND_HOSTNAME |
| 54 | #define CONFIG_BOOTP_GATEWAY |
| 55 | #define CONFIG_BOOTP_SUBNETMASK |
| 56 | #define CONFIG_NET_RETRY_COUNT 10 |
| 57 | #define CONFIG_CMD_PING |
| 58 | #define CONFIG_CMD_MII |
| 59 | #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ |
| 60 | #define CONFIG_MII /* Required in net/eth.c */ |
| 61 | #define CONFIG_PHY_GIGE /* per-board part of CPSW */ |
| 62 | #define CONFIG_PHYLIB |
| 63 | |
| 64 | #define CONFIG_SUPPORT_EMMC_BOOT |
| 65 | |
| 66 | /* USB xHCI HOST */ |
| 67 | #define CONFIG_CMD_USB |
| 68 | #define CONFIG_USB_HOST |
| 69 | #define CONFIG_USB_XHCI |
| 70 | #define CONFIG_USB_XHCI_OMAP |
| 71 | #define CONFIG_USB_STORAGE |
| 72 | #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 |
| 73 | |
| 74 | #define CONFIG_OMAP_USB_PHY |
| 75 | #define CONFIG_OMAP_USB3PHY1_HOST |
| 76 | |
| 77 | /* SATA */ |
| 78 | #define CONFIG_BOARD_LATE_INIT |
| 79 | #define CONFIG_CMD_SCSI |
| 80 | #define CONFIG_LIBATA |
| 81 | #define CONFIG_SCSI_AHCI |
| 82 | #define CONFIG_SCSI_AHCI_PLAT |
| 83 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| 84 | #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| 85 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| 86 | CONFIG_SYS_SCSI_MAX_LUN) |
| 87 | |
| 88 | #endif /* __CONFIG_BEAGLE_X5_H */ |