blob: efaae167feffc904c08fe76cb8a8ffdf296ebd35 [file] [log] [blame]
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001/*
2 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
3 *
4 * U-Boot version:
5 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
6 *
7 * Based on the Linux version which is:
8 * Copyright (C) 2012 Marvell
9 *
10 * Rami Rosen <rosenr@marvell.com>
11 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 *
13 * SPDX-License-Identifier: GPL-2.0
14 */
15
16#include <common.h>
17#include <net.h>
18#include <netdev.h>
19#include <config.h>
20#include <malloc.h>
21#include <asm/io.h>
22#include <asm/errno.h>
23#include <phy.h>
24#include <miiphy.h>
25#include <watchdog.h>
26#include <asm/arch/cpu.h>
27#include <asm/arch/soc.h>
28#include <linux/compat.h>
29#include <linux/mbus.h>
30
31#if !defined(CONFIG_PHYLIB)
32# error Marvell mvneta requires PHYLIB
33#endif
34
35/* Some linux -> U-Boot compatibility stuff */
36#define netdev_err(dev, fmt, args...) \
37 printf(fmt, ##args)
38#define netdev_warn(dev, fmt, args...) \
39 printf(fmt, ##args)
40#define netdev_info(dev, fmt, args...) \
41 printf(fmt, ##args)
42
43#define CONFIG_NR_CPUS 1
44#define BIT(nr) (1UL << (nr))
45#define ETH_HLEN 14 /* Total octets in header */
46
47/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
48#define WRAP (2 + ETH_HLEN + 4 + 32)
49#define MTU 1500
50#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
51
52#define MVNETA_SMI_TIMEOUT 10000
53
54/* Registers */
55#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
56#define MVNETA_RXQ_HW_BUF_ALLOC BIT(1)
57#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8)
58#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8)
59#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2))
60#define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16)
61#define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2))
62#define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2))
63#define MVNETA_RXQ_BUF_SIZE_SHIFT 19
64#define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19)
65#define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2))
66#define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff
67#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2))
68#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16
69#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255
70#define MVNETA_PORT_RX_RESET 0x1cc0
71#define MVNETA_PORT_RX_DMA_RESET BIT(0)
72#define MVNETA_PHY_ADDR 0x2000
73#define MVNETA_PHY_ADDR_MASK 0x1f
74#define MVNETA_SMI 0x2004
75#define MVNETA_PHY_REG_MASK 0x1f
76/* SMI register fields */
77#define MVNETA_SMI_DATA_OFFS 0 /* Data */
78#define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS)
79#define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
80#define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/
81#define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
82#define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS)
83#define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */
84#define MVNETA_SMI_BUSY (1 << 28) /* Busy */
85#define MVNETA_MBUS_RETRY 0x2010
86#define MVNETA_UNIT_INTR_CAUSE 0x2080
87#define MVNETA_UNIT_CONTROL 0x20B0
88#define MVNETA_PHY_POLLING_ENABLE BIT(1)
89#define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3))
90#define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3))
91#define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2))
92#define MVNETA_BASE_ADDR_ENABLE 0x2290
93#define MVNETA_PORT_CONFIG 0x2400
94#define MVNETA_UNI_PROMISC_MODE BIT(0)
95#define MVNETA_DEF_RXQ(q) ((q) << 1)
96#define MVNETA_DEF_RXQ_ARP(q) ((q) << 4)
97#define MVNETA_TX_UNSET_ERR_SUM BIT(12)
98#define MVNETA_DEF_RXQ_TCP(q) ((q) << 16)
99#define MVNETA_DEF_RXQ_UDP(q) ((q) << 19)
100#define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22)
101#define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25)
102#define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \
103 MVNETA_DEF_RXQ_ARP(q) | \
104 MVNETA_DEF_RXQ_TCP(q) | \
105 MVNETA_DEF_RXQ_UDP(q) | \
106 MVNETA_DEF_RXQ_BPDU(q) | \
107 MVNETA_TX_UNSET_ERR_SUM | \
108 MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
109#define MVNETA_PORT_CONFIG_EXTEND 0x2404
110#define MVNETA_MAC_ADDR_LOW 0x2414
111#define MVNETA_MAC_ADDR_HIGH 0x2418
112#define MVNETA_SDMA_CONFIG 0x241c
113#define MVNETA_SDMA_BRST_SIZE_16 4
114#define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1)
115#define MVNETA_RX_NO_DATA_SWAP BIT(4)
116#define MVNETA_TX_NO_DATA_SWAP BIT(5)
117#define MVNETA_DESC_SWAP BIT(6)
118#define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22)
119#define MVNETA_PORT_STATUS 0x2444
120#define MVNETA_TX_IN_PRGRS BIT(1)
121#define MVNETA_TX_FIFO_EMPTY BIT(8)
122#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
123#define MVNETA_SERDES_CFG 0x24A0
124#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
125#define MVNETA_QSGMII_SERDES_PROTO 0x0667
126#define MVNETA_TYPE_PRIO 0x24bc
127#define MVNETA_FORCE_UNI BIT(21)
128#define MVNETA_TXQ_CMD_1 0x24e4
129#define MVNETA_TXQ_CMD 0x2448
130#define MVNETA_TXQ_DISABLE_SHIFT 8
131#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
132#define MVNETA_ACC_MODE 0x2500
133#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
134#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
135#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
136#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
137
138/* Exception Interrupt Port/Queue Cause register */
139
140#define MVNETA_INTR_NEW_CAUSE 0x25a0
141#define MVNETA_INTR_NEW_MASK 0x25a4
142
143/* bits 0..7 = TXQ SENT, one bit per queue.
144 * bits 8..15 = RXQ OCCUP, one bit per queue.
145 * bits 16..23 = RXQ FREE, one bit per queue.
146 * bit 29 = OLD_REG_SUM, see old reg ?
147 * bit 30 = TX_ERR_SUM, one bit for 4 ports
148 * bit 31 = MISC_SUM, one bit for 4 ports
149 */
150#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0)
151#define MVNETA_TX_INTR_MASK_ALL (0xff << 0)
152#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8)
153#define MVNETA_RX_INTR_MASK_ALL (0xff << 8)
154
155#define MVNETA_INTR_OLD_CAUSE 0x25a8
156#define MVNETA_INTR_OLD_MASK 0x25ac
157
158/* Data Path Port/Queue Cause Register */
159#define MVNETA_INTR_MISC_CAUSE 0x25b0
160#define MVNETA_INTR_MISC_MASK 0x25b4
161#define MVNETA_INTR_ENABLE 0x25b8
162
163#define MVNETA_RXQ_CMD 0x2680
164#define MVNETA_RXQ_DISABLE_SHIFT 8
165#define MVNETA_RXQ_ENABLE_MASK 0x000000ff
166#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4))
167#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4))
168#define MVNETA_GMAC_CTRL_0 0x2c00
169#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
170#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
171#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
172#define MVNETA_GMAC_CTRL_2 0x2c08
173#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
174#define MVNETA_GMAC2_PORT_RGMII BIT(4)
175#define MVNETA_GMAC2_PORT_RESET BIT(6)
176#define MVNETA_GMAC_STATUS 0x2c10
177#define MVNETA_GMAC_LINK_UP BIT(0)
178#define MVNETA_GMAC_SPEED_1000 BIT(1)
179#define MVNETA_GMAC_SPEED_100 BIT(2)
180#define MVNETA_GMAC_FULL_DUPLEX BIT(3)
181#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4)
182#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
183#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
184#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
185#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
186#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
187#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
188#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
189#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
190#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
191#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
192#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
193#define MVNETA_MIB_COUNTERS_BASE 0x3080
194#define MVNETA_MIB_LATE_COLLISION 0x7c
195#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
196#define MVNETA_DA_FILT_OTH_MCAST 0x3500
197#define MVNETA_DA_FILT_UCAST_BASE 0x3600
198#define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2))
199#define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2))
200#define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000
201#define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16)
202#define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2))
203#define MVNETA_TXQ_DEC_SENT_SHIFT 16
204#define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2))
205#define MVNETA_TXQ_SENT_DESC_SHIFT 16
206#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
207#define MVNETA_PORT_TX_RESET 0x3cf0
208#define MVNETA_PORT_TX_DMA_RESET BIT(0)
209#define MVNETA_TX_MTU 0x3e0c
210#define MVNETA_TX_TOKEN_SIZE 0x3e14
211#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
212#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
213#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
214
215/* Descriptor ring Macros */
216#define MVNETA_QUEUE_NEXT_DESC(q, index) \
217 (((index) < (q)->last_desc) ? ((index) + 1) : 0)
218
219/* Various constants */
220
221/* Coalescing */
222#define MVNETA_TXDONE_COAL_PKTS 16
223#define MVNETA_RX_COAL_PKTS 32
224#define MVNETA_RX_COAL_USEC 100
225
226/* The two bytes Marvell header. Either contains a special value used
227 * by Marvell switches when a specific hardware mode is enabled (not
228 * supported by this driver) or is filled automatically by zeroes on
229 * the RX side. Those two bytes being at the front of the Ethernet
230 * header, they allow to have the IP header aligned on a 4 bytes
231 * boundary automatically: the hardware skips those two bytes on its
232 * own.
233 */
234#define MVNETA_MH_SIZE 2
235
236#define MVNETA_VLAN_TAG_LEN 4
237
238#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
239#define MVNETA_TX_CSUM_MAX_SIZE 9800
240#define MVNETA_ACC_MODE_EXT 1
241
242/* Timeout constants */
243#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000
244#define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000
245#define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000
246
247#define MVNETA_TX_MTU_MAX 0x3ffff
248
249/* Max number of Rx descriptors */
250#define MVNETA_MAX_RXD 16
251
252/* Max number of Tx descriptors */
253#define MVNETA_MAX_TXD 16
254
255/* descriptor aligned size */
256#define MVNETA_DESC_ALIGNED_SIZE 32
257
258struct mvneta_port {
259 void __iomem *base;
260 struct mvneta_rx_queue *rxqs;
261 struct mvneta_tx_queue *txqs;
262
263 u8 mcast_count[256];
264 u16 tx_ring_size;
265 u16 rx_ring_size;
266
267 phy_interface_t phy_interface;
268 unsigned int link;
269 unsigned int duplex;
270 unsigned int speed;
271
272 int init;
273 int phyaddr;
274 struct phy_device *phydev;
275 struct mii_dev *bus;
276};
277
278/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
279 * layout of the transmit and reception DMA descriptors, and their
280 * layout is therefore defined by the hardware design
281 */
282
283#define MVNETA_TX_L3_OFF_SHIFT 0
284#define MVNETA_TX_IP_HLEN_SHIFT 8
285#define MVNETA_TX_L4_UDP BIT(16)
286#define MVNETA_TX_L3_IP6 BIT(17)
287#define MVNETA_TXD_IP_CSUM BIT(18)
288#define MVNETA_TXD_Z_PAD BIT(19)
289#define MVNETA_TXD_L_DESC BIT(20)
290#define MVNETA_TXD_F_DESC BIT(21)
291#define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \
292 MVNETA_TXD_L_DESC | \
293 MVNETA_TXD_F_DESC)
294#define MVNETA_TX_L4_CSUM_FULL BIT(30)
295#define MVNETA_TX_L4_CSUM_NOT BIT(31)
296
297#define MVNETA_RXD_ERR_CRC 0x0
298#define MVNETA_RXD_ERR_SUMMARY BIT(16)
299#define MVNETA_RXD_ERR_OVERRUN BIT(17)
300#define MVNETA_RXD_ERR_LEN BIT(18)
301#define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18))
302#define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18))
303#define MVNETA_RXD_L3_IP4 BIT(25)
304#define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27))
305#define MVNETA_RXD_L4_CSUM_OK BIT(30)
306
307struct mvneta_tx_desc {
308 u32 command; /* Options used by HW for packet transmitting.*/
309 u16 reserverd1; /* csum_l4 (for future use) */
310 u16 data_size; /* Data size of transmitted packet in bytes */
311 u32 buf_phys_addr; /* Physical addr of transmitted buffer */
312 u32 reserved2; /* hw_cmd - (for future use, PMT) */
313 u32 reserved3[4]; /* Reserved - (for future use) */
314};
315
316struct mvneta_rx_desc {
317 u32 status; /* Info about received packet */
318 u16 reserved1; /* pnc_info - (for future use, PnC) */
319 u16 data_size; /* Size of received packet in bytes */
320
321 u32 buf_phys_addr; /* Physical address of the buffer */
322 u32 reserved2; /* pnc_flow_id (for future use, PnC) */
323
324 u32 buf_cookie; /* cookie for access to RX buffer in rx path */
325 u16 reserved3; /* prefetch_cmd, for future use */
326 u16 reserved4; /* csum_l4 - (for future use, PnC) */
327
328 u32 reserved5; /* pnc_extra PnC (for future use, PnC) */
329 u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */
330};
331
332struct mvneta_tx_queue {
333 /* Number of this TX queue, in the range 0-7 */
334 u8 id;
335
336 /* Number of TX DMA descriptors in the descriptor ring */
337 int size;
338
339 /* Index of last TX DMA descriptor that was inserted */
340 int txq_put_index;
341
342 /* Index of the TX DMA descriptor to be cleaned up */
343 int txq_get_index;
344
345 /* Virtual address of the TX DMA descriptors array */
346 struct mvneta_tx_desc *descs;
347
348 /* DMA address of the TX DMA descriptors array */
349 dma_addr_t descs_phys;
350
351 /* Index of the last TX DMA descriptor */
352 int last_desc;
353
354 /* Index of the next TX DMA descriptor to process */
355 int next_desc_to_proc;
356};
357
358struct mvneta_rx_queue {
359 /* rx queue number, in the range 0-7 */
360 u8 id;
361
362 /* num of rx descriptors in the rx descriptor ring */
363 int size;
364
365 /* Virtual address of the RX DMA descriptors array */
366 struct mvneta_rx_desc *descs;
367
368 /* DMA address of the RX DMA descriptors array */
369 dma_addr_t descs_phys;
370
371 /* Index of the last RX DMA descriptor */
372 int last_desc;
373
374 /* Index of the next RX DMA descriptor to process */
375 int next_desc_to_proc;
376};
377
378/* U-Boot doesn't use the queues, so set the number to 1 */
379static int rxq_number = 1;
380static int txq_number = 1;
381static int rxq_def;
382
383struct buffer_location {
384 struct mvneta_tx_desc *tx_descs;
385 struct mvneta_rx_desc *rx_descs;
386 u32 rx_buffers;
387};
388
389/*
390 * All 4 interfaces use the same global buffer, since only one interface
391 * can be enabled at once
392 */
393static struct buffer_location buffer_loc;
394
395/*
396 * Page table entries are set to 1MB, or multiples of 1MB
397 * (not < 1MB). driver uses less bd's so use 1MB bdspace.
398 */
399#define BD_SPACE (1 << 20)
400
401/* Utility/helper methods */
402
403/* Write helper method */
404static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
405{
406 writel(data, pp->base + offset);
407}
408
409/* Read helper method */
410static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
411{
412 return readl(pp->base + offset);
413}
414
415/* Clear all MIB counters */
416static void mvneta_mib_counters_clear(struct mvneta_port *pp)
417{
418 int i;
419
420 /* Perform dummy reads from MIB counters */
421 for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
422 mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
423}
424
425/* Rx descriptors helper methods */
426
427/* Checks whether the RX descriptor having this status is both the first
428 * and the last descriptor for the RX packet. Each RX packet is currently
429 * received through a single RX descriptor, so not having each RX
430 * descriptor with its first and last bits set is an error
431 */
432static int mvneta_rxq_desc_is_first_last(u32 status)
433{
434 return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
435 MVNETA_RXD_FIRST_LAST_DESC;
436}
437
438/* Add number of descriptors ready to receive new packets */
439static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
440 struct mvneta_rx_queue *rxq,
441 int ndescs)
442{
443 /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
444 * be added at once
445 */
446 while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
447 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
448 (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
449 MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
450 ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
451 }
452
453 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
454 (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
455}
456
457/* Get number of RX descriptors occupied by received packets */
458static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
459 struct mvneta_rx_queue *rxq)
460{
461 u32 val;
462
463 val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
464 return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
465}
466
467/* Update num of rx desc called upon return from rx path or
468 * from mvneta_rxq_drop_pkts().
469 */
470static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
471 struct mvneta_rx_queue *rxq,
472 int rx_done, int rx_filled)
473{
474 u32 val;
475
476 if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
477 val = rx_done |
478 (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
479 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
480 return;
481 }
482
483 /* Only 255 descriptors can be added at once */
484 while ((rx_done > 0) || (rx_filled > 0)) {
485 if (rx_done <= 0xff) {
486 val = rx_done;
487 rx_done = 0;
488 } else {
489 val = 0xff;
490 rx_done -= 0xff;
491 }
492 if (rx_filled <= 0xff) {
493 val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
494 rx_filled = 0;
495 } else {
496 val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
497 rx_filled -= 0xff;
498 }
499 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
500 }
501}
502
503/* Get pointer to next RX descriptor to be processed by SW */
504static struct mvneta_rx_desc *
505mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
506{
507 int rx_desc = rxq->next_desc_to_proc;
508
509 rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
510 return rxq->descs + rx_desc;
511}
512
513/* Tx descriptors helper methods */
514
515/* Update HW with number of TX descriptors to be sent */
516static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
517 struct mvneta_tx_queue *txq,
518 int pend_desc)
519{
520 u32 val;
521
522 /* Only 255 descriptors can be added at once ; Assume caller
523 * process TX desriptors in quanta less than 256
524 */
525 val = pend_desc;
526 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
527}
528
529/* Get pointer to next TX descriptor to be processed (send) by HW */
530static struct mvneta_tx_desc *
531mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
532{
533 int tx_desc = txq->next_desc_to_proc;
534
535 txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
536 return txq->descs + tx_desc;
537}
538
539/* Set rxq buf size */
540static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
541 struct mvneta_rx_queue *rxq,
542 int buf_size)
543{
544 u32 val;
545
546 val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
547
548 val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
549 val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
550
551 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
552}
553
554/* Start the Ethernet port RX and TX activity */
555static void mvneta_port_up(struct mvneta_port *pp)
556{
557 int queue;
558 u32 q_map;
559
560 /* Enable all initialized TXs. */
561 mvneta_mib_counters_clear(pp);
562 q_map = 0;
563 for (queue = 0; queue < txq_number; queue++) {
564 struct mvneta_tx_queue *txq = &pp->txqs[queue];
565 if (txq->descs != NULL)
566 q_map |= (1 << queue);
567 }
568 mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
569
570 /* Enable all initialized RXQs. */
571 q_map = 0;
572 for (queue = 0; queue < rxq_number; queue++) {
573 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
574 if (rxq->descs != NULL)
575 q_map |= (1 << queue);
576 }
577 mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
578}
579
580/* Stop the Ethernet port activity */
581static void mvneta_port_down(struct mvneta_port *pp)
582{
583 u32 val;
584 int count;
585
586 /* Stop Rx port activity. Check port Rx activity. */
587 val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
588
589 /* Issue stop command for active channels only */
590 if (val != 0)
591 mvreg_write(pp, MVNETA_RXQ_CMD,
592 val << MVNETA_RXQ_DISABLE_SHIFT);
593
594 /* Wait for all Rx activity to terminate. */
595 count = 0;
596 do {
597 if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
598 netdev_warn(pp->dev,
599 "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
600 val);
601 break;
602 }
603 mdelay(1);
604
605 val = mvreg_read(pp, MVNETA_RXQ_CMD);
606 } while (val & 0xff);
607
608 /* Stop Tx port activity. Check port Tx activity. Issue stop
609 * command for active channels only
610 */
611 val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
612
613 if (val != 0)
614 mvreg_write(pp, MVNETA_TXQ_CMD,
615 (val << MVNETA_TXQ_DISABLE_SHIFT));
616
617 /* Wait for all Tx activity to terminate. */
618 count = 0;
619 do {
620 if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
621 netdev_warn(pp->dev,
622 "TIMEOUT for TX stopped status=0x%08x\n",
623 val);
624 break;
625 }
626 mdelay(1);
627
628 /* Check TX Command reg that all Txqs are stopped */
629 val = mvreg_read(pp, MVNETA_TXQ_CMD);
630
631 } while (val & 0xff);
632
633 /* Double check to verify that TX FIFO is empty */
634 count = 0;
635 do {
636 if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
637 netdev_warn(pp->dev,
638 "TX FIFO empty timeout status=0x08%x\n",
639 val);
640 break;
641 }
642 mdelay(1);
643
644 val = mvreg_read(pp, MVNETA_PORT_STATUS);
645 } while (!(val & MVNETA_TX_FIFO_EMPTY) &&
646 (val & MVNETA_TX_IN_PRGRS));
647
648 udelay(200);
649}
650
651/* Enable the port by setting the port enable bit of the MAC control register */
652static void mvneta_port_enable(struct mvneta_port *pp)
653{
654 u32 val;
655
656 /* Enable port */
657 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
658 val |= MVNETA_GMAC0_PORT_ENABLE;
659 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
660}
661
662/* Disable the port and wait for about 200 usec before retuning */
663static void mvneta_port_disable(struct mvneta_port *pp)
664{
665 u32 val;
666
667 /* Reset the Enable bit in the Serial Control Register */
668 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
669 val &= ~MVNETA_GMAC0_PORT_ENABLE;
670 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
671
672 udelay(200);
673}
674
675/* Multicast tables methods */
676
677/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
678static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
679{
680 int offset;
681 u32 val;
682
683 if (queue == -1) {
684 val = 0;
685 } else {
686 val = 0x1 | (queue << 1);
687 val |= (val << 24) | (val << 16) | (val << 8);
688 }
689
690 for (offset = 0; offset <= 0xc; offset += 4)
691 mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
692}
693
694/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
695static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
696{
697 int offset;
698 u32 val;
699
700 if (queue == -1) {
701 val = 0;
702 } else {
703 val = 0x1 | (queue << 1);
704 val |= (val << 24) | (val << 16) | (val << 8);
705 }
706
707 for (offset = 0; offset <= 0xfc; offset += 4)
708 mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
709}
710
711/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
712static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
713{
714 int offset;
715 u32 val;
716
717 if (queue == -1) {
718 memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
719 val = 0;
720 } else {
721 memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
722 val = 0x1 | (queue << 1);
723 val |= (val << 24) | (val << 16) | (val << 8);
724 }
725
726 for (offset = 0; offset <= 0xfc; offset += 4)
727 mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
728}
729
730/* This method sets defaults to the NETA port:
731 * Clears interrupt Cause and Mask registers.
732 * Clears all MAC tables.
733 * Sets defaults to all registers.
734 * Resets RX and TX descriptor rings.
735 * Resets PHY.
736 * This method can be called after mvneta_port_down() to return the port
737 * settings to defaults.
738 */
739static void mvneta_defaults_set(struct mvneta_port *pp)
740{
741 int cpu;
742 int queue;
743 u32 val;
744
745 /* Clear all Cause registers */
746 mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
747 mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
748 mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
749
750 /* Mask all interrupts */
751 mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
752 mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
753 mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
754 mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
755
756 /* Enable MBUS Retry bit16 */
757 mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
758
759 /* Set CPU queue access map - all CPUs have access to all RX
760 * queues and to all TX queues
761 */
762 for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
763 mvreg_write(pp, MVNETA_CPU_MAP(cpu),
764 (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
765 MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
766
767 /* Reset RX and TX DMAs */
768 mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
769 mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
770
771 /* Disable Legacy WRR, Disable EJP, Release from reset */
772 mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
773 for (queue = 0; queue < txq_number; queue++) {
774 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
775 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
776 }
777
778 mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
779 mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
780
781 /* Set Port Acceleration Mode */
782 val = MVNETA_ACC_MODE_EXT;
783 mvreg_write(pp, MVNETA_ACC_MODE, val);
784
785 /* Update val of portCfg register accordingly with all RxQueue types */
786 val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
787 mvreg_write(pp, MVNETA_PORT_CONFIG, val);
788
789 val = 0;
790 mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
791 mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
792
793 /* Build PORT_SDMA_CONFIG_REG */
794 val = 0;
795
796 /* Default burst size */
797 val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
798 val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
799 val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
800
801 /* Assign port SDMA configuration */
802 mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
803
804 /* Enable PHY polling in hardware for U-Boot */
805 val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
806 val |= MVNETA_PHY_POLLING_ENABLE;
807 mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
808
809 mvneta_set_ucast_table(pp, -1);
810 mvneta_set_special_mcast_table(pp, -1);
811 mvneta_set_other_mcast_table(pp, -1);
812}
813
814/* Set unicast address */
815static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
816 int queue)
817{
818 unsigned int unicast_reg;
819 unsigned int tbl_offset;
820 unsigned int reg_offset;
821
822 /* Locate the Unicast table entry */
823 last_nibble = (0xf & last_nibble);
824
825 /* offset from unicast tbl base */
826 tbl_offset = (last_nibble / 4) * 4;
827
828 /* offset within the above reg */
829 reg_offset = last_nibble % 4;
830
831 unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
832
833 if (queue == -1) {
834 /* Clear accepts frame bit at specified unicast DA tbl entry */
835 unicast_reg &= ~(0xff << (8 * reg_offset));
836 } else {
837 unicast_reg &= ~(0xff << (8 * reg_offset));
838 unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
839 }
840
841 mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
842}
843
844/* Set mac address */
845static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
846 int queue)
847{
848 unsigned int mac_h;
849 unsigned int mac_l;
850
851 if (queue != -1) {
852 mac_l = (addr[4] << 8) | (addr[5]);
853 mac_h = (addr[0] << 24) | (addr[1] << 16) |
854 (addr[2] << 8) | (addr[3] << 0);
855
856 mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
857 mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
858 }
859
860 /* Accept frames of this address */
861 mvneta_set_ucast_addr(pp, addr[5], queue);
862}
863
864/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
865static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
866 u32 phys_addr, u32 cookie)
867{
868 rx_desc->buf_cookie = cookie;
869 rx_desc->buf_phys_addr = phys_addr;
870}
871
872/* Decrement sent descriptors counter */
873static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
874 struct mvneta_tx_queue *txq,
875 int sent_desc)
876{
877 u32 val;
878
879 /* Only 255 TX descriptors can be updated at once */
880 while (sent_desc > 0xff) {
881 val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
882 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
883 sent_desc = sent_desc - 0xff;
884 }
885
886 val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
887 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
888}
889
890/* Get number of TX descriptors already sent by HW */
891static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
892 struct mvneta_tx_queue *txq)
893{
894 u32 val;
895 int sent_desc;
896
897 val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
898 sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
899 MVNETA_TXQ_SENT_DESC_SHIFT;
900
901 return sent_desc;
902}
903
904/* Display more error info */
905static void mvneta_rx_error(struct mvneta_port *pp,
906 struct mvneta_rx_desc *rx_desc)
907{
908 u32 status = rx_desc->status;
909
910 if (!mvneta_rxq_desc_is_first_last(status)) {
911 netdev_err(pp->dev,
912 "bad rx status %08x (buffer oversize), size=%d\n",
913 status, rx_desc->data_size);
914 return;
915 }
916
917 switch (status & MVNETA_RXD_ERR_CODE_MASK) {
918 case MVNETA_RXD_ERR_CRC:
919 netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
920 status, rx_desc->data_size);
921 break;
922 case MVNETA_RXD_ERR_OVERRUN:
923 netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
924 status, rx_desc->data_size);
925 break;
926 case MVNETA_RXD_ERR_LEN:
927 netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
928 status, rx_desc->data_size);
929 break;
930 case MVNETA_RXD_ERR_RESOURCE:
931 netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
932 status, rx_desc->data_size);
933 break;
934 }
935}
936
937static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
938 int rxq)
939{
940 return &pp->rxqs[rxq];
941}
942
943
944/* Drop packets received by the RXQ and free buffers */
945static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
946 struct mvneta_rx_queue *rxq)
947{
948 int rx_done;
949
950 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
951 if (rx_done)
952 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
953}
954
955/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
956static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
957 int num)
958{
959 int i;
960
961 for (i = 0; i < num; i++) {
962 u32 addr;
963
964 /* U-Boot special: Fill in the rx buffer addresses */
965 addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
966 mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
967 }
968
969 /* Add this number of RX descriptors as non occupied (ready to
970 * get packets)
971 */
972 mvneta_rxq_non_occup_desc_add(pp, rxq, i);
973
974 return 0;
975}
976
977/* Rx/Tx queue initialization/cleanup methods */
978
979/* Create a specified RX queue */
980static int mvneta_rxq_init(struct mvneta_port *pp,
981 struct mvneta_rx_queue *rxq)
982
983{
984 rxq->size = pp->rx_ring_size;
985
986 /* Allocate memory for RX descriptors */
987 rxq->descs_phys = (dma_addr_t)rxq->descs;
988 if (rxq->descs == NULL)
989 return -ENOMEM;
990
991 rxq->last_desc = rxq->size - 1;
992
993 /* Set Rx descriptors queue starting address */
994 mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
995 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
996
997 /* Fill RXQ with buffers from RX pool */
998 mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
999 mvneta_rxq_fill(pp, rxq, rxq->size);
1000
1001 return 0;
1002}
1003
1004/* Cleanup Rx queue */
1005static void mvneta_rxq_deinit(struct mvneta_port *pp,
1006 struct mvneta_rx_queue *rxq)
1007{
1008 mvneta_rxq_drop_pkts(pp, rxq);
1009
1010 rxq->descs = NULL;
1011 rxq->last_desc = 0;
1012 rxq->next_desc_to_proc = 0;
1013 rxq->descs_phys = 0;
1014}
1015
1016/* Create and initialize a tx queue */
1017static int mvneta_txq_init(struct mvneta_port *pp,
1018 struct mvneta_tx_queue *txq)
1019{
1020 txq->size = pp->tx_ring_size;
1021
1022 /* Allocate memory for TX descriptors */
1023 txq->descs_phys = (u32)txq->descs;
1024 if (txq->descs == NULL)
1025 return -ENOMEM;
1026
1027 txq->last_desc = txq->size - 1;
1028
1029 /* Set maximum bandwidth for enabled TXQs */
1030 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
1031 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
1032
1033 /* Set Tx descriptors queue starting address */
1034 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
1035 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
1036
1037 return 0;
1038}
1039
1040/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
1041static void mvneta_txq_deinit(struct mvneta_port *pp,
1042 struct mvneta_tx_queue *txq)
1043{
1044 txq->descs = NULL;
1045 txq->last_desc = 0;
1046 txq->next_desc_to_proc = 0;
1047 txq->descs_phys = 0;
1048
1049 /* Set minimum bandwidth for disabled TXQs */
1050 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
1051 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
1052
1053 /* Set Tx descriptors queue starting address and size */
1054 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
1055 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
1056}
1057
1058/* Cleanup all Tx queues */
1059static void mvneta_cleanup_txqs(struct mvneta_port *pp)
1060{
1061 int queue;
1062
1063 for (queue = 0; queue < txq_number; queue++)
1064 mvneta_txq_deinit(pp, &pp->txqs[queue]);
1065}
1066
1067/* Cleanup all Rx queues */
1068static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
1069{
1070 int queue;
1071
1072 for (queue = 0; queue < rxq_number; queue++)
1073 mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
1074}
1075
1076
1077/* Init all Rx queues */
1078static int mvneta_setup_rxqs(struct mvneta_port *pp)
1079{
1080 int queue;
1081
1082 for (queue = 0; queue < rxq_number; queue++) {
1083 int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
1084 if (err) {
1085 netdev_err(pp->dev, "%s: can't create rxq=%d\n",
1086 __func__, queue);
1087 mvneta_cleanup_rxqs(pp);
1088 return err;
1089 }
1090 }
1091
1092 return 0;
1093}
1094
1095/* Init all tx queues */
1096static int mvneta_setup_txqs(struct mvneta_port *pp)
1097{
1098 int queue;
1099
1100 for (queue = 0; queue < txq_number; queue++) {
1101 int err = mvneta_txq_init(pp, &pp->txqs[queue]);
1102 if (err) {
1103 netdev_err(pp->dev, "%s: can't create txq=%d\n",
1104 __func__, queue);
1105 mvneta_cleanup_txqs(pp);
1106 return err;
1107 }
1108 }
1109
1110 return 0;
1111}
1112
1113static void mvneta_start_dev(struct mvneta_port *pp)
1114{
1115 /* start the Rx/Tx activity */
1116 mvneta_port_enable(pp);
1117}
1118
1119static void mvneta_adjust_link(struct eth_device *dev)
1120{
1121 struct mvneta_port *pp = dev->priv;
1122 struct phy_device *phydev = pp->phydev;
1123 int status_change = 0;
1124
1125 if (phydev->link) {
1126 if ((pp->speed != phydev->speed) ||
1127 (pp->duplex != phydev->duplex)) {
1128 u32 val;
1129
1130 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1131 val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
1132 MVNETA_GMAC_CONFIG_GMII_SPEED |
1133 MVNETA_GMAC_CONFIG_FULL_DUPLEX |
1134 MVNETA_GMAC_AN_SPEED_EN |
1135 MVNETA_GMAC_AN_DUPLEX_EN);
1136
1137 if (phydev->duplex)
1138 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1139
1140 if (phydev->speed == SPEED_1000)
1141 val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1142 else
1143 val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1144
1145 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1146
1147 pp->duplex = phydev->duplex;
1148 pp->speed = phydev->speed;
1149 }
1150 }
1151
1152 if (phydev->link != pp->link) {
1153 if (!phydev->link) {
1154 pp->duplex = -1;
1155 pp->speed = 0;
1156 }
1157
1158 pp->link = phydev->link;
1159 status_change = 1;
1160 }
1161
1162 if (status_change) {
1163 if (phydev->link) {
1164 u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1165 val |= (MVNETA_GMAC_FORCE_LINK_PASS |
1166 MVNETA_GMAC_FORCE_LINK_DOWN);
1167 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1168 mvneta_port_up(pp);
1169 } else {
1170 mvneta_port_down(pp);
1171 }
1172 }
1173}
1174
1175static int mvneta_open(struct eth_device *dev)
1176{
1177 struct mvneta_port *pp = dev->priv;
1178 int ret;
1179
1180 ret = mvneta_setup_rxqs(pp);
1181 if (ret)
1182 return ret;
1183
1184 ret = mvneta_setup_txqs(pp);
1185 if (ret)
1186 return ret;
1187
1188 mvneta_adjust_link(dev);
1189
1190 mvneta_start_dev(pp);
1191
1192 return 0;
1193}
1194
1195/* Initialize hw */
1196static int mvneta_init(struct mvneta_port *pp)
1197{
1198 int queue;
1199
1200 /* Disable port */
1201 mvneta_port_disable(pp);
1202
1203 /* Set port default values */
1204 mvneta_defaults_set(pp);
1205
1206 pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
1207 GFP_KERNEL);
1208 if (!pp->txqs)
1209 return -ENOMEM;
1210
1211 /* U-Boot special: use preallocated area */
1212 pp->txqs[0].descs = buffer_loc.tx_descs;
1213
1214 /* Initialize TX descriptor rings */
1215 for (queue = 0; queue < txq_number; queue++) {
1216 struct mvneta_tx_queue *txq = &pp->txqs[queue];
1217 txq->id = queue;
1218 txq->size = pp->tx_ring_size;
1219 }
1220
1221 pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
1222 GFP_KERNEL);
1223 if (!pp->rxqs) {
1224 kfree(pp->txqs);
1225 return -ENOMEM;
1226 }
1227
1228 /* U-Boot special: use preallocated area */
1229 pp->rxqs[0].descs = buffer_loc.rx_descs;
1230
1231 /* Create Rx descriptor rings */
1232 for (queue = 0; queue < rxq_number; queue++) {
1233 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
1234 rxq->id = queue;
1235 rxq->size = pp->rx_ring_size;
1236 }
1237
1238 return 0;
1239}
1240
1241/* platform glue : initialize decoding windows */
1242static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
1243{
1244 const struct mbus_dram_target_info *dram;
1245 u32 win_enable;
1246 u32 win_protect;
1247 int i;
1248
1249 dram = mvebu_mbus_dram_info();
1250 for (i = 0; i < 6; i++) {
1251 mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
1252 mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
1253
1254 if (i < 4)
1255 mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
1256 }
1257
1258 win_enable = 0x3f;
1259 win_protect = 0;
1260
1261 for (i = 0; i < dram->num_cs; i++) {
1262 const struct mbus_dram_window *cs = dram->cs + i;
1263 mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
1264 (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
1265
1266 mvreg_write(pp, MVNETA_WIN_SIZE(i),
1267 (cs->size - 1) & 0xffff0000);
1268
1269 win_enable &= ~(1 << i);
1270 win_protect |= 3 << (2 * i);
1271 }
1272
1273 mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
1274}
1275
1276/* Power up the port */
1277static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
1278{
1279 u32 ctrl;
1280
1281 /* MAC Cause register should be cleared */
1282 mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
1283
1284 ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
1285
1286 /* Even though it might look weird, when we're configured in
1287 * SGMII or QSGMII mode, the RGMII bit needs to be set.
1288 */
1289 switch (phy_mode) {
1290 case PHY_INTERFACE_MODE_QSGMII:
1291 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
1292 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1293 break;
1294 case PHY_INTERFACE_MODE_SGMII:
1295 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
1296 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1297 break;
1298 case PHY_INTERFACE_MODE_RGMII:
1299 case PHY_INTERFACE_MODE_RGMII_ID:
1300 ctrl |= MVNETA_GMAC2_PORT_RGMII;
1301 break;
1302 default:
1303 return -EINVAL;
1304 }
1305
1306 /* Cancel Port Reset */
1307 ctrl &= ~MVNETA_GMAC2_PORT_RESET;
1308 mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
1309
1310 while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
1311 MVNETA_GMAC2_PORT_RESET) != 0)
1312 continue;
1313
1314 return 0;
1315}
1316
1317/* Device initialization routine */
1318static int mvneta_probe(struct eth_device *dev)
1319{
1320 struct mvneta_port *pp = dev->priv;
1321 int err;
1322
1323 pp->tx_ring_size = MVNETA_MAX_TXD;
1324 pp->rx_ring_size = MVNETA_MAX_RXD;
1325
1326 err = mvneta_init(pp);
1327 if (err < 0) {
1328 dev_err(&pdev->dev, "can't init eth hal\n");
1329 return err;
1330 }
1331
1332 mvneta_conf_mbus_windows(pp);
1333
1334 mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def);
1335
1336 err = mvneta_port_power_up(pp, pp->phy_interface);
1337 if (err < 0) {
1338 dev_err(&pdev->dev, "can't power up port\n");
1339 return err;
1340 }
1341
1342 /* Call open() now as it needs to be done before runing send() */
1343 mvneta_open(dev);
1344
1345 return 0;
1346}
1347
1348/* U-Boot only functions follow here */
1349
1350/* SMI / MDIO functions */
1351
1352static int smi_wait_ready(struct mvneta_port *pp)
1353{
1354 u32 timeout = MVNETA_SMI_TIMEOUT;
1355 u32 smi_reg;
1356
1357 /* wait till the SMI is not busy */
1358 do {
1359 /* read smi register */
1360 smi_reg = mvreg_read(pp, MVNETA_SMI);
1361 if (timeout-- == 0) {
1362 printf("Error: SMI busy timeout\n");
1363 return -EFAULT;
1364 }
1365 } while (smi_reg & MVNETA_SMI_BUSY);
1366
1367 return 0;
1368}
1369
1370/*
1371 * smi_reg_read - miiphy_read callback function.
1372 *
1373 * Returns 16bit phy register value, or 0xffff on error
1374 */
1375static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
1376{
1377 struct eth_device *dev = eth_get_dev_by_name(devname);
1378 struct mvneta_port *pp = dev->priv;
1379 u32 smi_reg;
1380 u32 timeout;
1381
1382 /* check parameters */
1383 if (phy_adr > MVNETA_PHY_ADDR_MASK) {
1384 printf("Error: Invalid PHY address %d\n", phy_adr);
1385 return -EFAULT;
1386 }
1387
1388 if (reg_ofs > MVNETA_PHY_REG_MASK) {
1389 printf("Err: Invalid register offset %d\n", reg_ofs);
1390 return -EFAULT;
1391 }
1392
1393 /* wait till the SMI is not busy */
1394 if (smi_wait_ready(pp) < 0)
1395 return -EFAULT;
1396
1397 /* fill the phy address and regiser offset and read opcode */
1398 smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
1399 | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS)
1400 | MVNETA_SMI_OPCODE_READ;
1401
1402 /* write the smi register */
1403 mvreg_write(pp, MVNETA_SMI, smi_reg);
1404
1405 /*wait till read value is ready */
1406 timeout = MVNETA_SMI_TIMEOUT;
1407
1408 do {
1409 /* read smi register */
1410 smi_reg = mvreg_read(pp, MVNETA_SMI);
1411 if (timeout-- == 0) {
1412 printf("Err: SMI read ready timeout\n");
1413 return -EFAULT;
1414 }
1415 } while (!(smi_reg & MVNETA_SMI_READ_VALID));
1416
1417 /* Wait for the data to update in the SMI register */
1418 for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
1419 ;
1420
1421 *data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK);
1422
1423 return 0;
1424}
1425
1426/*
1427 * smi_reg_write - imiiphy_write callback function.
1428 *
1429 * Returns 0 if write succeed, -EINVAL on bad parameters
1430 * -ETIME on timeout
1431 */
1432static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
1433{
1434 struct eth_device *dev = eth_get_dev_by_name(devname);
1435 struct mvneta_port *pp = dev->priv;
1436 u32 smi_reg;
1437
1438 /* check parameters */
1439 if (phy_adr > MVNETA_PHY_ADDR_MASK) {
1440 printf("Error: Invalid PHY address %d\n", phy_adr);
1441 return -EFAULT;
1442 }
1443
1444 if (reg_ofs > MVNETA_PHY_REG_MASK) {
1445 printf("Err: Invalid register offset %d\n", reg_ofs);
1446 return -EFAULT;
1447 }
1448
1449 /* wait till the SMI is not busy */
1450 if (smi_wait_ready(pp) < 0)
1451 return -EFAULT;
1452
1453 /* fill the phy addr and reg offset and write opcode and data */
1454 smi_reg = (data << MVNETA_SMI_DATA_OFFS);
1455 smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
1456 | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS);
1457 smi_reg &= ~MVNETA_SMI_OPCODE_READ;
1458
1459 /* write the smi register */
1460 mvreg_write(pp, MVNETA_SMI, smi_reg);
1461
1462 return 0;
1463}
1464
1465static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
1466{
1467 struct mvneta_port *pp = dev->priv;
1468 struct phy_device *phydev;
1469
1470 mvneta_port_power_up(pp, pp->phy_interface);
1471
1472 if (!pp->init || pp->link == 0) {
1473 /* Set phy address of the port */
1474 mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
1475 phydev = phy_connect(pp->bus, pp->phyaddr, dev,
1476 pp->phy_interface);
1477
1478 pp->phydev = phydev;
1479 phy_config(phydev);
1480 phy_startup(phydev);
1481 if (!phydev->link) {
1482 printf("%s: No link.\n", phydev->dev->name);
1483 return -1;
1484 }
1485
1486 /* Full init on first call */
1487 mvneta_probe(dev);
1488 pp->init = 1;
1489 } else {
1490 /* Upon all following calls, this is enough */
1491 mvneta_port_up(pp);
1492 mvneta_port_enable(pp);
1493 }
1494
1495 return 0;
1496}
1497
1498static int mvneta_send(struct eth_device *dev, void *ptr, int len)
1499{
1500 struct mvneta_port *pp = dev->priv;
1501 struct mvneta_tx_queue *txq = &pp->txqs[0];
1502 struct mvneta_tx_desc *tx_desc;
1503 int sent_desc;
1504 u32 timeout = 0;
1505
1506 /* Get a descriptor for the first part of the packet */
1507 tx_desc = mvneta_txq_next_desc_get(txq);
1508
1509 tx_desc->buf_phys_addr = (u32)ptr;
1510 tx_desc->data_size = len;
1511 flush_dcache_range((u32)ptr, (u32)ptr + len);
1512
1513 /* First and Last descriptor */
1514 tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
1515 mvneta_txq_pend_desc_add(pp, txq, 1);
1516
1517 /* Wait for packet to be sent (queue might help with speed here) */
1518 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1519 while (!sent_desc) {
1520 if (timeout++ > 10000) {
1521 printf("timeout: packet not sent\n");
1522 return -1;
1523 }
1524 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1525 }
1526
1527 /* txDone has increased - hw sent packet */
1528 mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
1529 return 0;
1530
1531 return 0;
1532}
1533
1534static int mvneta_recv(struct eth_device *dev)
1535{
1536 struct mvneta_port *pp = dev->priv;
1537 int rx_done;
1538 int packets_done;
1539 struct mvneta_rx_queue *rxq;
1540
1541 /* get rx queue */
1542 rxq = mvneta_rxq_handle_get(pp, rxq_def);
1543 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
1544 packets_done = rx_done;
1545
1546 while (packets_done--) {
1547 struct mvneta_rx_desc *rx_desc;
1548 unsigned char *data;
1549 u32 rx_status;
1550 int rx_bytes;
1551
1552 /*
1553 * No cache invalidation needed here, since the desc's are
1554 * located in a uncached memory region
1555 */
1556 rx_desc = mvneta_rxq_next_desc_get(rxq);
1557
1558 rx_status = rx_desc->status;
1559 if (!mvneta_rxq_desc_is_first_last(rx_status) ||
1560 (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
1561 mvneta_rx_error(pp, rx_desc);
1562 /* leave the descriptor untouched */
1563 continue;
1564 }
1565
1566 /* 2 bytes for marvell header. 4 bytes for crc */
1567 rx_bytes = rx_desc->data_size - 6;
1568
1569 /* give packet to stack - skip on first 2 bytes */
1570 data = (u8 *)rx_desc->buf_cookie + 2;
1571 /*
1572 * No cache invalidation needed here, since the rx_buffer's are
1573 * located in a uncached memory region
1574 */
Joe Hershberger1fd92db2015-04-08 01:41:06 -05001575 net_process_received_packet(data, rx_bytes);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001576 }
1577
1578 /* Update rxq management counters */
1579 if (rx_done)
1580 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
1581
1582 return 0;
1583}
1584
1585static void mvneta_halt(struct eth_device *dev)
1586{
1587 struct mvneta_port *pp = dev->priv;
1588
1589 mvneta_port_down(pp);
1590 mvneta_port_disable(pp);
1591}
1592
1593int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
1594{
1595 struct eth_device *dev;
1596 struct mvneta_port *pp;
1597 void *bd_space;
1598
1599 dev = calloc(1, sizeof(*dev));
1600 if (dev == NULL)
1601 return -ENOMEM;
1602
1603 pp = calloc(1, sizeof(*pp));
1604 if (pp == NULL)
1605 return -ENOMEM;
1606
1607 dev->priv = pp;
1608
1609 /*
1610 * Allocate buffer area for descs and rx_buffers. This is only
1611 * done once for all interfaces. As only one interface can
1612 * be active. Make this area DMA save by disabling the D-cache
1613 */
1614 if (!buffer_loc.tx_descs) {
1615 /* Align buffer area for descs and rx_buffers to 1MiB */
1616 bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
1617 mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE,
1618 DCACHE_OFF);
1619 buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
1620 buffer_loc.rx_descs = (struct mvneta_rx_desc *)
1621 ((u32)bd_space +
1622 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
1623 buffer_loc.rx_buffers = (u32)
1624 (bd_space +
1625 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
1626 MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
1627 }
1628
1629 sprintf(dev->name, "neta%d", devnum);
1630
1631 pp->base = (void __iomem *)base_addr;
1632 dev->iobase = base_addr;
1633 dev->init = mvneta_init_u_boot;
1634 dev->halt = mvneta_halt;
1635 dev->send = mvneta_send;
1636 dev->recv = mvneta_recv;
1637 dev->write_hwaddr = NULL;
1638
1639 /*
1640 * The PHY interface type is configured via the
1641 * board specific CONFIG_SYS_NETA_INTERFACE_TYPE
1642 * define.
1643 */
1644 pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE;
1645
1646 eth_register(dev);
1647
1648 pp->phyaddr = phy_addr;
1649 miiphy_register(dev->name, smi_reg_read, smi_reg_write);
1650 pp->bus = miiphy_get_dev_by_name(dev->name);
1651
1652 return 1;
1653}