blob: 9a0d8a2c01009608cf19e06defa8a4e6176faffe [file] [log] [blame]
Ian Campbell2c7e3b92014-10-24 21:20:44 +01001if ARCH_SUNXI
2
3choice
4 prompt "Sunxi SoC Variant"
5
Ian Campbellc3be2792014-10-24 21:20:45 +01006config MACH_SUN4I
Ian Campbell2c7e3b92014-10-24 21:20:44 +01007 bool "sun4i (Allwinner A10)"
8 select CPU_V7
9 select SUPPORT_SPL
10
Ian Campbellc3be2792014-10-24 21:20:45 +010011config MACH_SUN5I
Ian Campbell2c7e3b92014-10-24 21:20:44 +010012 bool "sun5i (Allwinner A13)"
13 select CPU_V7
14 select SUPPORT_SPL
15
Ian Campbellc3be2792014-10-24 21:20:45 +010016config MACH_SUN6I
Ian Campbell2c7e3b92014-10-24 21:20:44 +010017 bool "sun6i (Allwinner A31)"
18 select CPU_V7
Hans de Goede8c2c9cf2014-10-25 20:18:10 +020019 select SUPPORT_SPL
Ian Campbell2c7e3b92014-10-24 21:20:44 +010020
Ian Campbellc3be2792014-10-24 21:20:45 +010021config MACH_SUN7I
Ian Campbell2c7e3b92014-10-24 21:20:44 +010022 bool "sun7i (Allwinner A20)"
23 select CPU_V7
Hans de Goedeea624e12014-11-14 09:34:30 +010024 select CPU_V7_HAS_NONSEC
25 select CPU_V7_HAS_VIRT
Ian Campbell2c7e3b92014-10-24 21:20:44 +010026 select SUPPORT_SPL
Hans de Goedeb366fb92014-10-24 20:12:04 +020027 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
Ian Campbell2c7e3b92014-10-24 21:20:44 +010028
Ian Campbellc3be2792014-10-24 21:20:45 +010029config MACH_SUN8I
Ian Campbell2c7e3b92014-10-24 21:20:44 +010030 bool "sun8i (Allwinner A23)"
31 select CPU_V7
Hans de Goede08fd1472014-12-07 14:34:27 +010032 select SUPPORT_SPL
Ian Campbell2c7e3b92014-10-24 21:20:44 +010033
34endchoice
Maxime Ripard8a6564d2014-10-03 20:16:29 +080035
Hans de Goede08fd1472014-12-07 14:34:27 +010036if MACH_SUN6I || MACH_SUN8I
Hans de Goede37781a12014-11-15 19:46:39 +010037
38config DRAM_CLK
39 int "sun6i dram clock speed"
40 default 312
41 ---help---
42 Set the dram clock speed, valid range 240 - 480, must be a multiple
43 of 24.
44
45config DRAM_ZQ
46 int "sun6i dram zq value"
47 default 123
48 ---help---
49 Set the dram zq value.
50
51endif
52
Maxime Ripard8a6564d2014-10-03 20:16:29 +080053config SYS_CONFIG_NAME
Ian Campbellc3be2792014-10-24 21:20:45 +010054 default "sun4i" if MACH_SUN4I
55 default "sun5i" if MACH_SUN5I
56 default "sun6i" if MACH_SUN6I
57 default "sun7i" if MACH_SUN7I
58 default "sun8i" if MACH_SUN8I
Hans de Goede6ae66f22014-08-01 09:28:24 +020059
Ian Campbelld9a20472014-10-24 21:20:49 +010060choice
61 prompt "Board"
62
63config TARGET_A10_OLINUXINO_L
64 bool "A10_OLINUXINO_L"
65 depends on MACH_SUN4I
66
67config TARGET_A10S_OLINUXINO_M
68 bool "A10S_OLINUXINO_M"
69 depends on MACH_SUN5I
70
71config TARGET_A13_OLINUXINOM
72 bool "A13_OLINUXINOM"
73 depends on MACH_SUN5I
74
75config TARGET_A13_OLINUXINO
76 bool "A13_OLINUXINO"
77 depends on MACH_SUN5I
78
79config TARGET_A20_OLINUXINO_L2
80 bool "A20_OLINUXINO_L2"
81 depends on MACH_SUN7I
82
83config TARGET_A20_OLINUXINO_L
84 bool "A20_OLINUXINO_L"
85 depends on MACH_SUN7I
86
87config TARGET_A20_OLINUXINO_M
88 bool "A20_OLINUXINO_M"
89 depends on MACH_SUN7I
90
91config TARGET_AUXTEK_T004
92 bool "AUXTEK_T004"
93 depends on MACH_SUN5I
94
95config TARGET_BANANAPI
96 bool "BANANAPI"
97 depends on MACH_SUN7I
98
Hans de Goede81ec1002014-12-31 11:30:26 +010099config TARGET_BANANAPRO
100 bool "BANANAPRO"
101 depends on MACH_SUN7I
102
Ian Campbelld9a20472014-10-24 21:20:49 +0100103config TARGET_COLOMBUS
104 bool "COLOMBUS"
105 depends on MACH_SUN6I
106
107config TARGET_CUBIEBOARD2
108 bool "CUBIEBOARD2"
109 depends on MACH_SUN7I
110
111config TARGET_CUBIEBOARD
112 bool "CUBIEBOARD"
113 depends on MACH_SUN4I
114
115config TARGET_CUBIETRUCK
116 bool "CUBIETRUCK"
117 depends on MACH_SUN7I
118
Chen-Yu Tsaia805b7e2014-12-09 16:56:53 +0800119config TARGET_HUMMINGBIRD_A31
120 bool "HUMMINGBIRD_A31"
121 depends on MACH_SUN6I
122
Ian Campbelld9a20472014-10-24 21:20:49 +0100123config TARGET_IPPO_Q8H_V5
124 bool "IPPO_Q8H_V5"
125 depends on MACH_SUN8I
126
Zoltan HERPAI213dcbf2015-01-06 01:09:18 +0100127config TARGET_PCDUINO
128 bool "PCDUINO"
129 depends on MACH_SUN4I
130
Ian Campbelld9a20472014-10-24 21:20:49 +0100131config TARGET_PCDUINO3
132 bool "PCDUINO3"
133 depends on MACH_SUN7I
134
135config TARGET_MELE_A1000G
136 bool "MELE_A1000G"
137 depends on MACH_SUN4I
138
139config TARGET_MELE_A1000
140 bool "MELE_A1000"
141 depends on MACH_SUN4I
142
143config TARGET_MELE_M3
144 bool "MELE_M3"
145 depends on MACH_SUN7I
146
Hans de Goede505ecee2014-10-27 23:29:49 +0100147config TARGET_MELE_M9
148 bool "MELE_M9"
149 depends on MACH_SUN6I
150
Ian Campbelld9a20472014-10-24 21:20:49 +0100151config TARGET_MINI_X_1GB
152 bool "MINI_X_1GB"
153 depends on MACH_SUN4I
154
155config TARGET_MINI_X
156 bool "MINI_X"
157 depends on MACH_SUN4I
158
Siarhei Siamashkaf4f0df02014-12-27 09:38:57 +0200159config TARGET_MSI_PRIMO73
160 bool "MSI Primo73 (7\" tablet)"
161 depends on MACH_SUN7I
162 ---help---
163 The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
164 1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
165 rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
166 and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
167 (both volume buttons are also connected to the UBOOT_SEL pin). The
168 external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
169 OTG and 3.5mm headphone jack. More details are available at
170 http://linux-sunxi.org/MSI_Primo73
171
Siarhei Siamashka80e86692014-12-27 09:38:56 +0200172config TARGET_MSI_PRIMO81
173 bool "MSI Primo81 (7.85\" tablet)"
174 depends on MACH_SUN6I
175 ---help---
176 The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
177 1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
178 rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
179 and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
180 (both volume buttons are also connected to the UBOOT_SEL pin). The
181 external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
182 OTG and 3.5mm headphone jack. More details are available at
183 http://linux-sunxi.org/MSI_Primo81
184
Ian Campbelld9a20472014-10-24 21:20:49 +0100185config TARGET_BA10_TV_BOX
186 bool "BA10_TV_BOX"
187 depends on MACH_SUN4I
188
189config TARGET_I12_TVBOX
190 bool "I12_TVBOX"
191 depends on MACH_SUN7I
192
193config TARGET_QT840A
194 bool "QT840A"
195 depends on MACH_SUN7I
196
197config TARGET_R7DONGLE
198 bool "R7DONGLE"
199 depends on MACH_SUN5I
200
201endchoice
202
Masahiro Yamadadd840582014-07-30 14:08:14 +0900203config SYS_BOARD
Masahiro Yamadadd840582014-07-30 14:08:14 +0900204 default "sunxi"
205
206config SYS_SOC
Masahiro Yamadadd840582014-07-30 14:08:14 +0900207 default "sunxi"
208
Ian Campbell4ce99412014-10-24 21:20:46 +0100209config SPL_FEL
210 bool "SPL/FEL mode support"
211 depends on SPL
212 default n
213
Siarhei Siamashkaf0ce28e2014-12-25 02:34:47 +0200214config UART0_PORT_F
215 bool "UART0 on MicroSD breakout board"
216 depends on SPL_FEL
217 default n
218 ---help---
219 Repurpose the SD card slot for getting access to the UART0 serial
220 console. Primarily useful only for low level u-boot debugging on
221 tablets, where normal UART0 is difficult to access and requires
222 device disassembly and/or soldering. As the SD card can't be used
223 at the same time, the system can be only booted in the FEL mode.
224 Only enable this if you really know what you are doing.
225
Ian Campbell98e214d2014-08-31 13:13:43 +0100226config FDTFILE
227 string "Default fdtfile env setting for this board"
Hans de Goede846e3252014-08-01 09:37:58 +0200228
Hans de Goedeaccc9e42014-10-22 14:56:36 +0200229config OLD_SUNXI_KERNEL_COMPAT
230 boolean "Enable workarounds for booting old kernels"
231 default n
232 ---help---
233 Set this to enable various workarounds for old kernels, this results in
234 sub-optimal settings for newer kernels, only enable if needed.
235
Hans de Goedecd821132014-10-02 20:29:26 +0200236config MMC0_CD_PIN
237 string "Card detect pin for mmc0"
238 default ""
239 ---help---
240 Set the card detect pin for mmc0, leave empty to not use cd. This
241 takes a string in the format understood by sunxi_name_to_gpio, e.g.
242 PH1 for pin 1 of port H.
243
244config MMC1_CD_PIN
245 string "Card detect pin for mmc1"
246 default ""
247 ---help---
248 See MMC0_CD_PIN help text.
249
250config MMC2_CD_PIN
251 string "Card detect pin for mmc2"
252 default ""
253 ---help---
254 See MMC0_CD_PIN help text.
255
256config MMC3_CD_PIN
257 string "Card detect pin for mmc3"
258 default ""
259 ---help---
260 See MMC0_CD_PIN help text.
261
Hans de Goede2ccfac02014-10-02 20:43:50 +0200262config MMC_SUNXI_SLOT_EXTRA
263 int "mmc extra slot number"
264 default -1
265 ---help---
266 sunxi builds always enable mmc0, some boards also have a second sdcard
267 slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
268 support for this.
269
Hans de Goede115200c2014-11-07 16:09:00 +0100270config USB1_VBUS_PIN
271 string "Vbus enable pin for usb1 (ehci0)"
272 default "PH6" if MACH_SUN4I || MACH_SUN7I
Hans de Goede76946df2014-11-07 14:51:12 +0100273 default "PH27" if MACH_SUN6I
Hans de Goede115200c2014-11-07 16:09:00 +0100274 ---help---
275 Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
276 a string in the format understood by sunxi_name_to_gpio, e.g.
277 PH1 for pin 1 of port H.
278
279config USB2_VBUS_PIN
280 string "Vbus enable pin for usb2 (ehci1)"
281 default "PH3" if MACH_SUN4I || MACH_SUN7I
Hans de Goede76946df2014-11-07 14:51:12 +0100282 default "PH24" if MACH_SUN6I
Hans de Goede115200c2014-11-07 16:09:00 +0100283 ---help---
284 See USB1_VBUS_PIN help text.
285
Luc Verhaegen7f2c5212014-08-13 07:55:06 +0200286config VIDEO
Hans de Goede2dae8002014-12-21 16:28:32 +0100287 boolean "Enable graphical uboot console on HDMI, LCD or VGA"
Luc Verhaegen7f2c5212014-08-13 07:55:06 +0200288 default y
289 ---help---
Hans de Goede2dae8002014-12-21 16:28:32 +0100290 Say Y here to add support for using a cfb console on the HDMI, LCD
291 or VGA output found on most sunxi devices. See doc/README.video for
292 info on how to select the video output and mode.
293
Hans de Goede2fbf0912014-12-23 23:04:35 +0100294config VIDEO_HDMI
295 boolean "HDMI output support"
296 depends on VIDEO && !MACH_SUN8I
297 default y
298 ---help---
299 Say Y here to add support for outputting video over HDMI.
300
Hans de Goeded9786d22014-12-25 13:58:06 +0100301config VIDEO_VGA
302 boolean "VGA output support"
303 depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
304 default n
305 ---help---
306 Say Y here to add support for outputting video over VGA.
307
Hans de Goedee2bbdfb2014-12-24 12:17:07 +0100308config VIDEO_VGA_VIA_LCD
309 boolean "VGA via LCD controller support"
Hans de Goeded9786d22014-12-25 13:58:06 +0100310 depends on VIDEO && MACH_SUN5I
Hans de Goedee2bbdfb2014-12-24 12:17:07 +0100311 default n
312 ---help---
313 Say Y here to add support for external DACs connected to the parallel
314 LCD interface driving a VGA connector, such as found on the
315 Olimex A13 boards.
316
Hans de Goede2dae8002014-12-21 16:28:32 +0100317config VIDEO_LCD_MODE
318 string "LCD panel timing details"
319 depends on VIDEO
320 default ""
321 ---help---
322 LCD panel timing details string, leave empty if there is no LCD panel.
323 This is in drivers/video/videomodes.c: video_get_params() format, e.g.
324 x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
325
326config VIDEO_LCD_POWER
327 string "LCD panel power enable pin"
328 depends on VIDEO
329 default ""
330 ---help---
331 Set the power enable pin for the LCD panel. This takes a string in the
332 format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
333
334config VIDEO_LCD_BL_EN
335 string "LCD panel backlight enable pin"
336 depends on VIDEO
337 default ""
338 ---help---
339 Set the backlight enable pin for the LCD panel. This takes a string in the
340 the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
341 port H.
342
343config VIDEO_LCD_BL_PWM
344 string "LCD panel backlight pwm pin"
345 depends on VIDEO
346 default ""
347 ---help---
348 Set the backlight pwm pin for the LCD panel. This takes a string in the
349 format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
Luc Verhaegen7f2c5212014-08-13 07:55:06 +0200350
Hans de Goede86b49092014-09-18 21:03:34 +0200351config USB_KEYBOARD
352 boolean "Enable USB keyboard support"
353 default y
354 ---help---
355 Say Y here to add support for using a USB keyboard (typically used
Hans de Goede2dae8002014-12-21 16:28:32 +0100356 in combination with a graphical console).
Hans de Goede86b49092014-09-18 21:03:34 +0200357
Masahiro Yamadadd840582014-07-30 14:08:14 +0900358endif