blob: eaf8c855818823e67321785c8cd50e94476220e6 [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
3 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +000011 */
12
13#ifndef _CONFIG_DNS325_H
14#define _CONFIG_DNS325_H
15
16/*
17 * Machine number definition
18 */
19#define MACH_TYPE_DNS325 3800
20#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Stefanbfacf462011-12-23 06:35:04 +000027#define CONFIG_KW88F6281 /* SOC Name */
28#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29
30/*
31 * Commands configuration
32 */
33#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
34#include <config_cmd_default.h>
35#define CONFIG_CMD_DHCP
36#define CONFIG_CMD_ENV
37#define CONFIG_CMD_NAND
38#define CONFIG_CMD_PING
39#define CONFIG_CMD_USB
40#define CONFIG_CMD_IDE
41#define CONFIG_CMD_DATE
42#define CONFIG_SYS_MVFS
43
44#define CONFIG_NR_DRAM_BANKS 1
45
46/*
47 * mv-common.h should be defined after CMD configs since it used them
48 * to enable certain macros
49 */
50#include "mv-common.h"
51
52/* Remove or override few declarations from mv-common.h */
53#undef CONFIG_SYS_PROMPT
Stefanbfacf462011-12-23 06:35:04 +000054
55/*
56 * Ethernet Driver configuration
57 */
58#ifdef CONFIG_CMD_NET
59#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
60#define CONFIG_NETCONSOLE
61#endif
62
63/*
64 * SATA Driver configuration
65 */
66#ifdef CONFIG_MVSATA_IDE
67#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
68#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
69#endif
70
71/*
72 * RTC driver configuration
73 */
74#ifdef CONFIG_CMD_DATE
75#define CONFIG_RTC_MV
76#endif
77
78/*
79 * Enable GPI0 support
80 */
81#define CONFIG_KIRKWOOD_GPIO
82
83/*
84 * Use the HUSH parser
85 */
86#define CONFIG_SYS_HUSH_PARSER
Stefanbfacf462011-12-23 06:35:04 +000087
88/*
89 * Console configuration
90 */
91#define CONFIG_CONSOLE_MUX
92#define CONFIG_SYS_CONSOLE_IS_IN_ENV
93
94/*
95 * Enable device tree support
96 */
97#define CONFIG_OF_LIBFDT
98
99/*
100 * Display cpu info at boot
101 */
102#define CONFIG_DISPLAY_CPUINFO
103
104/*
105 * Environment variables configurations
106 */
107#ifdef CONFIG_CMD_NAND
108#define CONFIG_ENV_IS_IN_NAND
109#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
110#else
111#define CONFIG_ENV_IS_NOWHERE
112#endif
113
114#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
115#define CONFIG_ENV_ADDR 0xe0000
116#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
117
118/*
119 * Default environment variables
120 */
121#define MTDIDS_DEFAULT "nand0=orion_nand"
122
123#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
124 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
125
126#define CONFIG_EXTRA_ENV_SETTINGS \
127 "stdin=serial\0" \
128 "stdout=serial\0" \
129 "stderr=serial\0" \
130 "loadaddr=0x800000\0" \
131 "autoload=no\0" \
132 "console=ttyS0,115200\0" \
133 "mtdparts="MTDPARTS_DEFAULT \
134 "optargs=\0" \
135 "bootenv=uEnv.txt\0" \
136 "importbootenv=echo Importing environment ...; " \
137 "env import -t ${loadaddr} ${filesize}\0" \
138 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
139 "setbootargs=setenv bootargs console=${console} " \
140 "${optargs} " \
141 "${mtdparts} " \
142 "root=${bootenvroot} " \
143 "rootfstype=${bootenvrootfstype}\0" \
144 "subbootcmd=run setbootargs; " \
145 "if run bootenvloadimage; then " \
146 "bootm ${loadaddr};" \
147 "fi;\0" \
148 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
149 "nandrootfstype=ubifs\0" \
150 "nandloadimage=nand read ${loadaddr} kernel\0" \
151 "setnandbootenv=echo Booting from nand ...; " \
152 "setenv bootenvroot ${nandroot}; " \
153 "setenv bootenvrootfstype ${nandrootfstype}; " \
154 "setenv bootenvloadimage ${nandloadimage}\0"
155
156#define CONFIG_BOOTCOMMAND \
157 "if test -n ${bootenv} && usb start; then " \
158 "if run loadbootenv; then " \
159 "echo Loaded environment ${bootenv} from usb;" \
160 "run importbootenv;" \
161 "fi;" \
162 "if test -n ${bootenvcmd}; then " \
163 "echo Running bootenvcmd ...;" \
164 "run bootenvcmd;" \
165 "fi;" \
166 "fi;" \
167 "run setnandbootenv subbootcmd;"
168
169#endif /* _CONFIG_DNS325_H */