blob: d77df9cad204081ed5eb7a583a8c0bb6d489c22f [file] [log] [blame]
wdenkd126bfb2003-04-10 11:18:18 +00001/*
Wolfgang Denk29f8f582008-08-09 23:17:32 +02002 * (C) Copyright 2000-2008
wdenkd126bfb2003-04-10 11:18:18 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC860 1
37#define CONFIG_MPC860T 1
38#define CONFIG_MPC862 1
39
40#define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */
41
42#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
Wolfgang Denk3cb7a482009-07-28 22:13:52 +020043#define CONFIG_SYS_SMC_RXBUFLEN 128
44#define CONFIG_SYS_MAXIDLE 10
wdenkd126bfb2003-04-10 11:18:18 +000045#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
46
wdenkae3af052003-08-07 22:18:11 +000047#define CONFIG_BOOTCOUNT_LIMIT
wdenkd126bfb2003-04-10 11:18:18 +000048
wdenkae3af052003-08-07 22:18:11 +000049#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenkd126bfb2003-04-10 11:18:18 +000050
51#define CONFIG_BOARD_TYPES 1 /* support board types */
52
53#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010054 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
wdenkd126bfb2003-04-10 11:18:18 +000055 "echo"
56
57#undef CONFIG_BOOTARGS
58
59#define CONFIG_EXTRA_ENV_SETTINGS \
wdenkae3af052003-08-07 22:18:11 +000060 "netdev=eth0\0" \
wdenkd126bfb2003-04-10 11:18:18 +000061 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010062 "nfsroot=${serverip}:${rootpath}\0" \
wdenkd126bfb2003-04-10 11:18:18 +000063 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010064 "addip=setenv bootargs ${bootargs} " \
65 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
66 ":${hostname}:${netdev}:off panic=1\0" \
wdenkd126bfb2003-04-10 11:18:18 +000067 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010068 "bootm ${kernel_addr}\0" \
wdenkd126bfb2003-04-10 11:18:18 +000069 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010070 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
71 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenkd126bfb2003-04-10 11:18:18 +000072 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020073 "hostname=TQM862L\0" \
74 "bootfile=TQM862L/uImage\0" \
Wolfgang Denkeb6da802007-09-16 02:39:35 +020075 "fdt_addr=40040000\0" \
76 "kernel_addr=40060000\0" \
77 "ramdisk_addr=40200000\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020078 "u-boot=TQM862L/u-image.bin\0" \
79 "load=tftp 200000 ${u-boot}\0" \
80 "update=prot off 40000000 +${filesize};" \
81 "era 40000000 +${filesize};" \
82 "cp.b 200000 40000000 ${filesize};" \
83 "sete filesize;save\0" \
wdenkd126bfb2003-04-10 11:18:18 +000084 ""
85#define CONFIG_BOOTCOMMAND "run flash_self"
86
87#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020088#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenkd126bfb2003-04-10 11:18:18 +000089
90#undef CONFIG_WATCHDOG /* watchdog disabled */
91
92#define CONFIG_STATUS_LED 1 /* Status LED enabled */
93
94#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
95
Jon Loeliger37d4bb72007-07-09 21:38:02 -050096/*
97 * BOOTP options
98 */
99#define CONFIG_BOOTP_SUBNETMASK
100#define CONFIG_BOOTP_GATEWAY
101#define CONFIG_BOOTP_HOSTNAME
102#define CONFIG_BOOTP_BOOTPATH
103#define CONFIG_BOOTP_BOOTFILESIZE
104
wdenkd126bfb2003-04-10 11:18:18 +0000105
106#define CONFIG_MAC_PARTITION
107#define CONFIG_DOS_PARTITION
108
109#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
110
wdenkd126bfb2003-04-10 11:18:18 +0000111
Jon Loeliger26946902007-07-04 22:30:50 -0500112/*
113 * Command line configuration.
114 */
115#include <config_cmd_default.h>
116
117#define CONFIG_CMD_ASKENV
118#define CONFIG_CMD_DATE
119#define CONFIG_CMD_DHCP
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200120#define CONFIG_CMD_ELF
Wolfgang Denk9a63b7f2009-02-21 21:51:21 +0100121#define CONFIG_CMD_EXT2
Jon Loeliger26946902007-07-04 22:30:50 -0500122#define CONFIG_CMD_IDE
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200123#define CONFIG_CMD_JFFS2
Jon Loeliger26946902007-07-04 22:30:50 -0500124#define CONFIG_CMD_NFS
125#define CONFIG_CMD_SNTP
126
wdenkd126bfb2003-04-10 11:18:18 +0000127
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200128#define CONFIG_NETCONSOLE
129
130
wdenkd126bfb2003-04-10 11:18:18 +0000131/*
132 * Miscellaneous configurable options
133 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134#define CONFIG_SYS_LONGHELP /* undef to save memory */
135#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenkd126bfb2003-04-10 11:18:18 +0000136
Wolfgang Denk2751a952006-10-28 02:29:14 +0200137#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
139#ifdef CONFIG_SYS_HUSH_PARSER
140#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenkd126bfb2003-04-10 11:18:18 +0000141#endif
142
Jon Loeliger26946902007-07-04 22:30:50 -0500143#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200144#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkd126bfb2003-04-10 11:18:18 +0000145#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkd126bfb2003-04-10 11:18:18 +0000147#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
149#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
150#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkd126bfb2003-04-10 11:18:18 +0000151
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200152#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
153#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkd126bfb2003-04-10 11:18:18 +0000154
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenkd126bfb2003-04-10 11:18:18 +0000156
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200157#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkd126bfb2003-04-10 11:18:18 +0000158
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200159#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenkd126bfb2003-04-10 11:18:18 +0000160
161/*
162 * Low Level Configuration Settings
163 * (address mappings, register initial values, etc.)
164 * You should know what you are doing if you make changes here.
165 */
166/*-----------------------------------------------------------------------
167 * Internal Memory Mapped Register
168 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169#define CONFIG_SYS_IMMR 0xFFF00000
wdenkd126bfb2003-04-10 11:18:18 +0000170
171/*-----------------------------------------------------------------------
172 * Definitions for initial stack pointer and data area (in DPRAM)
173 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200174#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
175#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
176#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
177#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
178#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkd126bfb2003-04-10 11:18:18 +0000179
180/*-----------------------------------------------------------------------
181 * Start addresses for the final memory configuration
182 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkd126bfb2003-04-10 11:18:18 +0000184 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_SDRAM_BASE 0x00000000
186#define CONFIG_SYS_FLASH_BASE 0x40000000
187#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
188#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
189#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenkd126bfb2003-04-10 11:18:18 +0000190
191/*
192 * For booting Linux, the board info and command line data
193 * have to be in the first 8 MB of memory, since this is
194 * the maximum mapped by the Linux kernel during initialization.
195 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkd126bfb2003-04-10 11:18:18 +0000197
198/*-----------------------------------------------------------------------
199 * FLASH organization
200 */
wdenkd126bfb2003-04-10 11:18:18 +0000201
Martin Krausee318d9e2007-09-27 11:10:08 +0200202/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200204#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200205#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
206#define CONFIG_SYS_FLASH_EMPTY_INFO
207#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
208#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
209#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
wdenkd126bfb2003-04-10 11:18:18 +0000210
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200211#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200212#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
213#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
wdenkd126bfb2003-04-10 11:18:18 +0000214
215/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200216#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
217#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
wdenkd126bfb2003-04-10 11:18:18 +0000218
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
Wolfgang Denk67c31032007-09-16 17:10:04 +0200220
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200221#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
222
wdenkd126bfb2003-04-10 11:18:18 +0000223/*-----------------------------------------------------------------------
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200224 * Dynamic MTD partition support
225 */
Stefan Roese68d7d652009-03-19 13:30:36 +0100226#define CONFIG_CMD_MTDPARTS
Stefan Roese942556a2009-05-12 14:32:58 +0200227#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
228#define CONFIG_FLASH_CFI_MTD
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200229#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
230
231#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
232 "128k(dtb)," \
233 "1664k(kernel)," \
234 "2m(rootfs)," \
Wolfgang Denkcd829192008-08-12 16:08:38 +0200235 "4m(data)"
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200236
237/*-----------------------------------------------------------------------
wdenkd126bfb2003-04-10 11:18:18 +0000238 * Hardware Information Block
239 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200240#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
241#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
242#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
wdenkd126bfb2003-04-10 11:18:18 +0000243
244/*-----------------------------------------------------------------------
245 * Cache Configuration
246 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200247#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger26946902007-07-04 22:30:50 -0500248#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200249#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenkd126bfb2003-04-10 11:18:18 +0000250#endif
251
252/*-----------------------------------------------------------------------
253 * SYPCR - System Protection Control 11-9
254 * SYPCR can only be written once after reset!
255 *-----------------------------------------------------------------------
256 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
257 */
258#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200259#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenkd126bfb2003-04-10 11:18:18 +0000260 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
261#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenkd126bfb2003-04-10 11:18:18 +0000263#endif
264
265/*-----------------------------------------------------------------------
266 * SIUMCR - SIU Module Configuration 11-6
267 *-----------------------------------------------------------------------
268 * PCMCIA config., multi-function pin tri-state
269 */
270#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200271#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkd126bfb2003-04-10 11:18:18 +0000272#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkd126bfb2003-04-10 11:18:18 +0000274#endif /* CONFIG_CAN_DRIVER */
275
276/*-----------------------------------------------------------------------
277 * TBSCR - Time Base Status and Control 11-26
278 *-----------------------------------------------------------------------
279 * Clear Reference Interrupt Status, Timebase freezing enabled
280 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenkd126bfb2003-04-10 11:18:18 +0000282
283/*-----------------------------------------------------------------------
284 * RTCSC - Real-Time Clock Status and Control Register 11-27
285 *-----------------------------------------------------------------------
286 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200287#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenkd126bfb2003-04-10 11:18:18 +0000288
289/*-----------------------------------------------------------------------
290 * PISCR - Periodic Interrupt Status and Control 11-31
291 *-----------------------------------------------------------------------
292 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
293 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200294#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenkd126bfb2003-04-10 11:18:18 +0000295
296/*-----------------------------------------------------------------------
297 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
298 *-----------------------------------------------------------------------
299 * Reset PLL lock status sticky bit, timer expired status bit and timer
300 * interrupt status bit
wdenkd126bfb2003-04-10 11:18:18 +0000301 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkd126bfb2003-04-10 11:18:18 +0000303
304/*-----------------------------------------------------------------------
305 * SCCR - System Clock and reset Control Register 15-27
306 *-----------------------------------------------------------------------
307 * Set clock output, timebase and RTC source and divider,
308 * power management and some other internal clocks
309 */
310#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200311#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkd126bfb2003-04-10 11:18:18 +0000312 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
313 SCCR_DFALCD00)
wdenkd126bfb2003-04-10 11:18:18 +0000314
315/*-----------------------------------------------------------------------
316 * PCMCIA stuff
317 *-----------------------------------------------------------------------
318 *
319 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200320#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
321#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
322#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
323#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
324#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
325#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
326#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
327#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenkd126bfb2003-04-10 11:18:18 +0000328
329/*-----------------------------------------------------------------------
330 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
331 *-----------------------------------------------------------------------
332 */
333
334#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
335
336#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
337#undef CONFIG_IDE_LED /* LED for ide not supported */
338#undef CONFIG_IDE_RESET /* reset for ide not supported */
339
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200340#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
341#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
wdenkd126bfb2003-04-10 11:18:18 +0000342
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200343#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenkd126bfb2003-04-10 11:18:18 +0000344
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200345#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenkd126bfb2003-04-10 11:18:18 +0000346
347/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200348#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkd126bfb2003-04-10 11:18:18 +0000349
350/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200351#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkd126bfb2003-04-10 11:18:18 +0000352
353/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200354#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenkd126bfb2003-04-10 11:18:18 +0000355
356/*-----------------------------------------------------------------------
357 *
358 *-----------------------------------------------------------------------
359 *
360 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200361#define CONFIG_SYS_DER 0
wdenkd126bfb2003-04-10 11:18:18 +0000362
363/*
364 * Init Memory Controller:
365 *
366 * BR0/1 and OR0/1 (FLASH)
367 */
368
369#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
wdenk71f95112003-06-15 22:40:42 +0000370#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
wdenkd126bfb2003-04-10 11:18:18 +0000371
372/* used to re-map FLASH both when starting from SRAM or FLASH:
373 * restrict access enough to keep SRAM working (if any)
374 * but not too much to meddle with FLASH accesses
375 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
377#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenkd126bfb2003-04-10 11:18:18 +0000378
379/*
380 * FLASH timing:
381 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200382#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
wdenkd126bfb2003-04-10 11:18:18 +0000383 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkd126bfb2003-04-10 11:18:18 +0000384
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200385#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
386#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
387#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenkd126bfb2003-04-10 11:18:18 +0000388
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
390#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
391#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
wdenkd126bfb2003-04-10 11:18:18 +0000392
393/*
394 * BR2/3 and OR2/3 (SDRAM)
395 *
396 */
397#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
398#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
399#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
400
401/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200402#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenkd126bfb2003-04-10 11:18:18 +0000403
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200404#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
405#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkd126bfb2003-04-10 11:18:18 +0000406
407#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200408#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
409#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkd126bfb2003-04-10 11:18:18 +0000410#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200411#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
412#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
413#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
414#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
wdenkd126bfb2003-04-10 11:18:18 +0000415 BR_PS_8 | BR_MS_UPMB | BR_V )
416#endif /* CONFIG_CAN_DRIVER */
417
418/*
419 * Memory Periodic Timer Prescaler
420 *
421 * The Divider for PTA (refresh timer) configuration is based on an
422 * example SDRAM configuration (64 MBit, one bank). The adjustment to
423 * the number of chip selects (NCS) and the actually needed refresh
424 * rate is done by setting MPTPR.
425 *
426 * PTA is calculated from
427 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
428 *
429 * gclk CPU clock (not bus clock!)
430 * Trefresh Refresh cycle * 4 (four word bursts used)
431 *
432 * 4096 Rows from SDRAM example configuration
433 * 1000 factor s -> ms
434 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
435 * 4 Number of refresh cycles per period
436 * 64 Refresh cycle in ms per number of rows
437 * --------------------------------------------
438 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
439 *
wdenk73a8b272003-06-05 19:27:42 +0000440 * 50 MHz => 50.000.000 / Divider = 98
441 * 66 Mhz => 66.000.000 / Divider = 129
442 * 80 Mhz => 80.000.000 / Divider = 156
443 * 100 Mhz => 100.000.000 / Divider = 195
wdenkd126bfb2003-04-10 11:18:18 +0000444 */
wdenke9132ea2004-04-24 23:23:30 +0000445
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200446#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
447#define CONFIG_SYS_MAMR_PTA 98
wdenkd126bfb2003-04-10 11:18:18 +0000448
449/*
450 * For 16 MBit, refresh rates could be 31.3 us
451 * (= 64 ms / 2K = 125 / quad bursts).
452 * For a simpler initialization, 15.6 us is used instead.
453 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200454 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
455 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
wdenkd126bfb2003-04-10 11:18:18 +0000456 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200457#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
458#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenkd126bfb2003-04-10 11:18:18 +0000459
460/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200461#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
462#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenkd126bfb2003-04-10 11:18:18 +0000463
464/*
465 * MAMR settings for SDRAM
466 */
467
468/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200469#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkd126bfb2003-04-10 11:18:18 +0000470 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
471 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
472/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200473#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkd126bfb2003-04-10 11:18:18 +0000474 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
475 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
476
477
478/*
479 * Internal Definitions
480 *
481 * Boot Flags
482 */
483#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
484#define BOOTFLAG_WARM 0x02 /* Software reboot */
485
486#define CONFIG_NET_MULTI
487#define CONFIG_SCC1_ENET
488#define CONFIG_FEC_ENET
Heiko Schocher48690d82010-07-20 17:45:02 +0200489#define CONFIG_ETHPRIME "SCC"
wdenkd126bfb2003-04-10 11:18:18 +0000490
Heiko Schocher7026ead2010-02-09 15:50:27 +0100491/* pass open firmware flat tree */
492#define CONFIG_OF_LIBFDT 1
493#define CONFIG_OF_BOARD_SETUP 1
494#define CONFIG_HWCONFIG 1
495
wdenkd126bfb2003-04-10 11:18:18 +0000496#endif /* __CONFIG_H */