blob: b710f1a0f53acb64df63bc3a442d429da455fda6 [file] [log] [blame]
Andre Przywara95c3b062023-10-19 15:51:39 +01001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
Samuel Hollandce003702022-04-27 15:31:31 -05002/*
3 * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
4 */
5
6#include "sun50i-h6-pine-h64.dts"
7
8/ {
9 model = "Pine H64 model B";
10 compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
11
12 /delete-node/ reg_gmac_3v3;
13
14 wifi_pwrseq: wifi_pwrseq {
15 compatible = "mmc-pwrseq-simple";
16 reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
17 post-power-on-delay-ms = <200>;
18 };
19};
20
21&hdmi_connector {
22 /delete-property/ ddc-en-gpios;
23};
24
25&emac {
26 phy-supply = <&reg_aldo2>;
27};
28
29&mmc1 {
30 vmmc-supply = <&reg_cldo3>;
31 vqmmc-supply = <&reg_aldo1>;
32 mmc-pwrseq = <&wifi_pwrseq>;
33 bus-width = <4>;
34 non-removable;
35 status = "okay";
36};
37
38&uart1 {
39 pinctrl-names = "default";
40 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
41 uart-has-rtscts;
42 status = "okay";
43
44 bluetooth {
45 compatible = "realtek,rtl8723bs-bt";
46 device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
47 host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
48 enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
49 max-speed = <1500000>;
50 };
51};