Lokesh Vutla | 853f7f5 | 2018-08-27 15:59:09 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/pinctrl/k3-am65.h> |
| 7 | |
| 8 | / { |
| 9 | chosen { |
| 10 | stdout-path = "serial2:115200n8"; |
| 11 | }; |
| 12 | |
| 13 | aliases { |
| 14 | serial2 = &main_uart0; |
| 15 | }; |
| 16 | }; |
| 17 | |
| 18 | &cbass_main{ |
| 19 | u-boot,dm-spl; |
| 20 | secure_proxy: secure_proxy@32c00000 { |
| 21 | compatible = "ti,am654-secure-proxy"; |
| 22 | #mbox-cells = <1>; |
| 23 | reg-names = "target_data", "rt", "scfg"; |
| 24 | reg = <0x32c00000 0x100000>, |
| 25 | <0x32400000 0x100000>, |
| 26 | <0x32800000 0x100000>; |
| 27 | interrupt-names = "rx_011"; |
| 28 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 29 | }; |
| 30 | |
| 31 | dmsc: dmsc { |
| 32 | compatible = "ti,k2g-sci"; |
| 33 | ti,host-id = <12>; |
| 34 | #address-cells = <1>; |
| 35 | #size-cells = <1>; |
| 36 | ranges; |
| 37 | /* |
| 38 | * In case of rare platforms that does not use am6 as |
| 39 | * system master, use /delete-property/ |
| 40 | */ |
| 41 | ti,system-reboot-controller; |
| 42 | mbox-names = "rx", "tx"; |
| 43 | |
| 44 | mboxes= <&secure_proxy 11>, |
| 45 | <&secure_proxy 13>; |
| 46 | |
| 47 | k3_pds: power-controller { |
| 48 | compatible = "ti,sci-pm-domain"; |
| 49 | #power-domain-cells = <1>; |
| 50 | }; |
| 51 | |
| 52 | k3_clks: clocks { |
| 53 | compatible = "ti,k2g-sci-clk"; |
| 54 | #clock-cells = <2>; |
| 55 | }; |
| 56 | |
| 57 | k3_reset: reset-controller { |
| 58 | compatible = "ti,sci-reset"; |
| 59 | #reset-cells = <2>; |
| 60 | }; |
| 61 | |
| 62 | k3_sysreset: sysreset-controller { |
| 63 | compatible = "ti,sci-sysreset"; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | main_pmx0: pinmux@11c000 { |
| 68 | compatible = "pinctrl-single"; |
| 69 | reg = <0x11c000 0x2e4>; |
| 70 | #pinctrl-cells = <1>; |
| 71 | pinctrl-single,register-width = <32>; |
| 72 | pinctrl-single,function-mask = <0xffffffff>; |
| 73 | }; |
| 74 | |
| 75 | main_pmx1: pinmux@11c2e8 { |
| 76 | compatible = "pinctrl-single"; |
| 77 | reg = <0x11c2e8 0x24>; |
| 78 | #pinctrl-cells = <1>; |
| 79 | pinctrl-single,register-width = <32>; |
| 80 | pinctrl-single,function-mask = <0xffffffff>; |
| 81 | }; |
| 82 | |
| 83 | main_uart0: serial@2800000 { |
| 84 | compatible = "ti,am654-uart", "ti,omap4-uart", "ns16550a"; |
| 85 | reg = <0x02800000 0x100>; |
| 86 | reg-shift = <2>; |
| 87 | reg-io-width = <4>; |
| 88 | interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| 89 | clock-frequency = <48000000>; |
| 90 | current-speed = <115200>; |
| 91 | status = "disabled"; |
| 92 | u-boot,dm-pre-reloc; |
| 93 | }; |
| 94 | |
| 95 | sdhci0: sdhci@04F80000 { |
| 96 | compatible = "arasan,sdhci-5.1"; |
| 97 | reg = <0x4F80000 0x1000>, |
| 98 | <0x4F90000 0x400>; |
| 99 | clocks = <&k3_clks 47 1>; |
| 100 | power-domains = <&k3_pds 47>; |
| 101 | max-frequency = <25000000>; |
| 102 | }; |
| 103 | |
| 104 | sdhci1: sdhci@04FA0000 { |
| 105 | compatible = "arasan,sdhci-5.1"; |
| 106 | reg = <0x4FA0000 0x1000>, |
| 107 | <0x4FB0000 0x400>; |
| 108 | clocks = <&k3_clks 48 1>; |
| 109 | power-domains = <&k3_pds 48>; |
| 110 | max-frequency = <25000000>; |
| 111 | }; |
| 112 | |
| 113 | }; |
| 114 | |
| 115 | &secure_proxy { |
| 116 | u-boot,dm-spl; |
| 117 | }; |
| 118 | |
| 119 | &dmsc { |
| 120 | u-boot,dm-spl; |
| 121 | }; |
| 122 | |
| 123 | &k3_pds { |
| 124 | u-boot,dm-spl; |
| 125 | }; |
| 126 | |
| 127 | &k3_clks { |
| 128 | u-boot,dm-spl; |
| 129 | }; |
| 130 | |
| 131 | &k3_reset { |
| 132 | u-boot,dm-spl; |
| 133 | }; |
| 134 | |
| 135 | &main_pmx0 { |
| 136 | u-boot,dm-spl; |
| 137 | main_uart0_pins_default: main_uart0_pins_default { |
| 138 | pinctrl-single,pins = < |
| 139 | AM65X_IOPAD(0x01e4, PIN_INPUT | MUX_MODE0) /* (AF11) UART0_RXD */ |
| 140 | AM65X_IOPAD(0x01e8, PIN_OUTPUT | MUX_MODE0) /* (AE11) UART0_TXD */ |
| 141 | AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0) /* (AG11) UART0_CTSn */ |
| 142 | AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0) /* (AD11) UART0_RTSn */ |
| 143 | >; |
| 144 | }; |
| 145 | |
| 146 | main_mmc0_pins_default: main_mmc0_pins_default { |
| 147 | pinctrl-single,pins = < |
| 148 | AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (B25) MMC0_CLK */ |
| 149 | AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP | MUX_MODE0) /* (B27) MMC0_CMD */ |
| 150 | AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* (A26) MMC0_DAT0 */ |
| 151 | AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP | MUX_MODE0) /* (E25) MMC0_DAT1 */ |
| 152 | AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C26) MMC0_DAT2 */ |
| 153 | AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP | MUX_MODE0) /* (A25) MMC0_DAT3 */ |
| 154 | AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP | MUX_MODE0) /* (E24) MMC0_DAT4 */ |
| 155 | AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP | MUX_MODE0) /* (A24) MMC0_DAT5 */ |
| 156 | AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP | MUX_MODE0) /* (B26) MMC0_DAT6 */ |
| 157 | AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */ |
| 158 | AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */ |
| 159 | >; |
| 160 | }; |
| 161 | |
| 162 | main_mmc1_pins_default: main_mmc1_pins_default { |
| 163 | pinctrl-single,pins = < |
| 164 | AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (C27) MMC1_CLK */ |
| 165 | AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP | MUX_MODE0) /* (C28) MMC1_CMD */ |
| 166 | AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP | MUX_MODE0) /* (D28) MMC1_DAT0 */ |
| 167 | AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP | MUX_MODE0) /* (E27) MMC1_DAT1 */ |
| 168 | AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP | MUX_MODE0) /* (D26) MMC1_DAT2 */ |
| 169 | AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP | MUX_MODE0) /* (D27) MMC1_DAT3 */ |
| 170 | AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */ |
| 171 | AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */ |
| 172 | >; |
| 173 | }; |
| 174 | |
| 175 | }; |
| 176 | |
| 177 | &main_pmx1 { |
| 178 | u-boot,dm-spl; |
| 179 | }; |
| 180 | |
| 181 | &main_uart0 { |
| 182 | u-boot,dm-spl; |
| 183 | pinctrl-names = "default"; |
| 184 | pinctrl-0 = <&main_uart0_pins_default>; |
| 185 | status = "okay"; |
| 186 | }; |
| 187 | |
| 188 | &sdhci0 { |
| 189 | u-boot,dm-spl; |
| 190 | status = "okay"; |
| 191 | non-removable; |
| 192 | bus-width = <8>; |
| 193 | pinctrl-names = "default"; |
| 194 | pinctrl-0 = <&main_mmc0_pins_default>; |
| 195 | }; |
| 196 | |
| 197 | &sdhci1 { |
| 198 | u-boot,dm-spl; |
| 199 | status = "okay"; |
| 200 | pinctrl-names = "default"; |
| 201 | pinctrl-0 = <&main_mmc1_pins_default>; |
| 202 | sdhci-caps-mask = <0x7 0x0>; |
| 203 | }; |