Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2fadd62fe669514c6027a615628e97e48bc8958f / . / arch / arm / dts / imx8mm-phg.dts
blob: e9447738b104f5ad64d7a01a4b600d823aeec6f4 [file] [log] [blame]
Fabio Estevamd12618b2023-01-10 17:18:08 -0300[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2022 Fabio Estevam <festevam@denx.de>
4 */
5
6/dts-v1/;
7
8#include "imx8mm-tqma8mqml.dtsi"
9
10/ {
11 model = "Cloos i.MX8MM PHG board";
12 compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
13
14 aliases {
15 mmc0 = &usdhc3;
16 mmc1 = &usdhc2;
17 };
18
19 chosen {
20 stdout-path = &uart2;
21 };
22
23 beeper {
24 compatible = "gpio-beeper";
25 pinctrl-0 = <&pinctrl_beeper>;
26 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
27 };
28
29 leds {
30 compatible = "gpio-leds";
31 pinctrl-names = "default";
32 pinctrl-0 = <&pinctrl_gpio_led>;
33
34 led-0 {
35 label = "status1";
36 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
37 };
38
39 led-1 {
40 label = "status2";
41 gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
42 };
43
44 led-2 {
45 label = "status3";
46 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
47 };
48
49 led-3 {
50 label = "run";
51 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
52 };
53
54 led-4 {
55 label = "powerled";
56 gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
57 };
58 };
59
60 reg_usb_otg_vbus: regulator-usb-otg-vbus {
61 compatible = "regulator-fixed";
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
64 regulator-name = "usb_otg_vbus";
65 regulator-min-microvolt = <5000000>;
66 regulator-max-microvolt = <5000000>;
67 gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
68 enable-active-high;
69 };
70
71 reg_usdhc2_vmmc: regulator-vmmc {
72 compatible = "regulator-fixed";
73 pinctrl-names = "default";
74 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
75 regulator-name = "VSD_3V3";
76 regulator-min-microvolt = <3300000>;
77 regulator-max-microvolt = <3300000>;
78 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
79 enable-active-high;
80 startup-delay-us = <100>;
81 off-on-delay-us = <12000>;
82 };
83};
84
85&ecspi1 {
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_ecspi1>;
88 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
89 status = "okay";
90};
91
92&fec1 {
93 pinctrl-names = "default";
94 pinctrl-0 = <&pinctrl_fec1>;
95 phy-mode = "rgmii-id";
96 phy-handle = <&ethphy0>;
97 fsl,magic-packet;
98 status = "okay";
99
100 mdio {
101 #address-cells = <1>;
102 #size-cells = <0>;
103
104 ethphy0: ethernet-phy@0 {
105 reg = <0>;
106 compatible = "ethernet-phy-ieee802.3-c22";
107 };
108 };
109};
110
111&i2c2 {
112 clock-frequency = <100000>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_i2c2>;
115 status = "okay";
116};
117
118&uart2 {
119 pinctrl-names = "default";
120 pinctrl-0 = <&pinctrl_uart2>;
121 status = "okay";
122};
123
124&usbphynop1 {
125 power-domains = <&pgc_otg1>;
126};
127
128&usbphynop2 {
129 power-domains = <&pgc_otg2>;
130};
131
132&usbotg1 {
133 dr_mode = "host";
134 vbus-supply = <&reg_usb_otg_vbus>;
135 status = "okay";
136};
137
138&usbotg2 {
139 dr_mode = "host";
140 status = "okay";
141};
142
143&usdhc2 {
144 assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
145 assigned-clock-rates = <400000000>;
146 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
147 pinctrl-names = "default", "state_100mhz", "state_200mhz";
148 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
149 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
150 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
151 bus-width = <4>;
152 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
153 disable-wp;
154 no-mmc;
155 no-sdio;
156 sd-uhs-sdr104;
157 sd-uhs-ddr50;
158 vmmc-supply = <&reg_usdhc2_vmmc>;
159 status = "okay";
160};
161
162&iomuxc {
163 pinctrl_beeper: beepergrp {
164 fsl,pins = <
165 MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
166 >;
167 };
168
169 pinctrl_ecspi1: ecspi1grp {
170 fsl,pins = <
171 MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
172 MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
173 MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
174 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
175 >;
176 };
177
178 pinctrl_fec1: fec1grp {
179 fsl,pins = <
180 MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002
181 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002
182 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14
183 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14
184 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14
185 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14
186 MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90
187 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90
188 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90
189 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90
190 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14
191 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90
192 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90
193 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14
194 MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x10
195 >;
196 };
197
198 pinctrl_gpio_led: gpioledgrp {
199 fsl,pins = <
200 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19
201 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19
202 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
203 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
204 MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19
205 >;
206 };
207
208 pinctrl_i2c2: i2c2grp {
209 fsl,pins = <
210 MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
211 MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
212 >;
213 };
214
215 pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
216 fsl,pins = <
217 MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x119
218 >;
219 };
220
221 pinctrl_uart2: uart2grp {
222 fsl,pins = <
223 MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
224 MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
225 >;
226 };
227
228 pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
229 fsl,pins = <
230 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
231 >;
232 };
233
234 pinctrl_usdhc2: usdhc2grp {
235 fsl,pins = <
236 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
237 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
238 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
239 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
240 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
241 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
242 >;
243 };
244
245 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
246 fsl,pins = <
247 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
248 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
249 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
250 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
251 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
252 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
253 >;
254 };
255
256 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
257 fsl,pins = <
258 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
259 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
260 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
261 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
262 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
263 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
264 >;
265 };
266};