blob: b9f7dc39c9660ed5f4fd6c9dce77eedea6de4a57 [file] [log] [blame]
Igor Opaniukfa14fa72020-02-12 17:14:29 +02001.. SPDX-License-Identifier: GPL-2.0+
2
3Verdin iMX8M Mini Module
4========================
5
6Quick Start
7-----------
8
9- Build the ARM trusted firmware binary
10- Get the DDR firmware
11- Build U-Boot
12- Flash to eMMC
13- Boot
14
15Get and Build the ARM Trusted Firmware (Trusted Firmware A)
16-----------------------------------------------------------
17
18.. code-block:: bash
19
20 $ echo "Downloading and building TF-A..."
Igor Opaniuk63a60982020-03-05 22:56:26 +020021 $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
22 $ cd trusted-firmware-a
Igor Opaniukfa14fa72020-02-12 17:14:29 +020023
24Then build ATF (TF-A):
25
26.. code-block:: bash
27
Igor Opaniuk63a60982020-03-05 22:56:26 +020028 $ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30860000 bl31
29 $ cp build/imx8mm/release/bl31.bin ../
Igor Opaniukfa14fa72020-02-12 17:14:29 +020030
31Get the DDR Firmware
32--------------------
33
34.. code-block:: bash
35
Igor Opaniuk63a60982020-03-05 22:56:26 +020036 $ cd ..
Igor Opaniukfa14fa72020-02-12 17:14:29 +020037 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
38 $ chmod +x firmware-imx-8.4.1.bin
39 $ ./firmware-imx-8.4.1.bin
40 $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
41
42Build U-Boot
43------------
44.. code-block:: bash
45
46 $ export CROSS_COMPILE=aarch64-linux-gnu-
Igor Opaniuk63a60982020-03-05 22:56:26 +020047 $ export ATF_LOAD_ADDR=0x920000
Igor Opaniukfa14fa72020-02-12 17:14:29 +020048 $ make verdin-imx8mm_defconfig
49 $ make flash.bin
50
51Flash to eMMC
52-------------
53
54.. code-block:: bash
55
56 > tftpboot ${loadaddr} flash.bin
57 > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
58 > mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
59
60As a convenience, instead of the last two commands one may also use the update
61U-Boot wrapper:
62
63.. code-block:: bash
64
65 > run update_uboot
66
67Boot
68----
69
70ATF, U-Boot proper and u-boot.dtb images are packed into FIT image,
71which is loaded and parsed by SPL.
72
73Boot sequence is:
74
75* SPL ---> ATF (TF-A) ---> U-Boot proper
76
77Output:
78
79.. code-block:: bash
80
81 U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
82 Normal Boot
83 Trying to boot from MMC1
Igor Opaniukfa14fa72020-02-12 17:14:29 +020084
85 U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
86
87 CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
88 Reset cause: POR
89 DRAM: 2 GiB
90 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
91 Loading Environment from MMC... OK
92 In: serial
93 Out: serial
94 Err: serial
95 Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
96 Net: eth0: ethernet@30be0000
97 Hit any key to stop autoboot: 0
98 Verdin iMX8MM #