| Caleb Connolly | e59755b | 2024-02-26 17:26:32 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | #include <dt-bindings/interrupt-controller/irq.h> |
| 3 | #include <dt-bindings/spmi/spmi.h> |
| 4 | |
| 5 | &spmi_bus { |
| 6 | pmi8998_lsid0: pmic@2 { |
| 7 | compatible = "qcom,pmi8998", "qcom,spmi-pmic"; |
| 8 | reg = <0x2 SPMI_USID>; |
| 9 | #address-cells = <1>; |
| 10 | #size-cells = <0>; |
| 11 | |
| 12 | pmi8998_charger: charger@1000 { |
| 13 | compatible = "qcom,pmi8998-charger"; |
| 14 | reg = <0x1000>; |
| 15 | |
| 16 | interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, |
| 17 | <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, |
| 18 | <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, |
| 19 | <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; |
| 20 | interrupt-names = "usb-plugin", |
| 21 | "bat-ov", |
| 22 | "wdog-bark", |
| 23 | "usbin-icl-change"; |
| 24 | |
| 25 | io-channels = <&pmi8998_rradc 3>, |
| 26 | <&pmi8998_rradc 4>; |
| 27 | io-channel-names = "usbin_i", "usbin_v"; |
| 28 | |
| 29 | status = "disabled"; |
| 30 | }; |
| 31 | |
| 32 | pmi8998_gpios: gpio@c000 { |
| 33 | compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; |
| 34 | reg = <0xc000>; |
| 35 | gpio-controller; |
| 36 | gpio-ranges = <&pmi8998_gpios 0 0 14>; |
| 37 | #gpio-cells = <2>; |
| 38 | interrupt-controller; |
| 39 | #interrupt-cells = <2>; |
| 40 | }; |
| 41 | |
| 42 | pmi8998_rradc: adc@4500 { |
| 43 | compatible = "qcom,pmi8998-rradc"; |
| 44 | reg = <0x4500>; |
| 45 | #io-channel-cells = <1>; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | pmi8998_lsid1: pmic@3 { |
| 50 | compatible = "qcom,pmi8998", "qcom,spmi-pmic"; |
| 51 | reg = <0x3 SPMI_USID>; |
| 52 | #address-cells = <1>; |
| 53 | #size-cells = <0>; |
| 54 | |
| 55 | labibb { |
| 56 | compatible = "qcom,pmi8998-lab-ibb"; |
| 57 | |
| 58 | ibb: ibb { |
| 59 | interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, |
| 60 | <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; |
| 61 | interrupt-names = "sc-err", "ocp"; |
| 62 | }; |
| 63 | |
| 64 | lab: lab { |
| 65 | interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, |
| 66 | <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; |
| 67 | interrupt-names = "sc-err", "ocp"; |
| 68 | }; |
| 69 | }; |
| 70 | |
| 71 | pmi8998_lpg: pwm { |
| 72 | compatible = "qcom,pmi8998-lpg"; |
| 73 | |
| 74 | #address-cells = <1>; |
| 75 | #size-cells = <0>; |
| 76 | #pwm-cells = <2>; |
| 77 | |
| 78 | status = "disabled"; |
| 79 | }; |
| 80 | |
| 81 | pmi8998_flash: led-controller@d300 { |
| 82 | compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; |
| 83 | reg = <0xd300>; |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | pmi8998_wled: leds@d800 { |
| 88 | compatible = "qcom,pmi8998-wled"; |
| 89 | reg = <0xd800>, <0xd900>; |
| 90 | interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, |
| 91 | <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; |
| 92 | interrupt-names = "ovp", "short"; |
| 93 | label = "backlight"; |
| 94 | |
| 95 | status = "disabled"; |
| 96 | }; |
| 97 | }; |
| 98 | }; |