blob: e2b12f677ee02dd62c4c64996bf5dbe8d1add11c [file] [log] [blame]
Stefan Roese779e9752007-08-14 14:44:41 +02001/*
2 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Stefan Roese779e9752007-08-14 14:44:41 +02006 */
7
8#include <common.h>
9#include <command.h>
10#include <malloc.h>
11#include <environment.h>
12#include <logbuff.h>
13#include <post.h>
14
15#include <asm/processor.h>
16#include <asm/io.h>
Stefan Roese09887762010-09-16 14:30:37 +020017#include <asm/ppc4xx-gpio.h>
Stefan Roese779e9752007-08-14 14:44:41 +020018
19DECLARE_GLOBAL_DATA_PTR;
20
21#define REBOOT_MAGIC 0x07081967
22#define REBOOT_NOP 0x00000000
23#define REBOOT_DO_POST 0x00000001
24
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020025extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
Stefan Roese779e9752007-08-14 14:44:41 +020026
27ulong flash_get_size(ulong base, int banknum);
28void env_crc_update(void);
Stefan Roese779e9752007-08-14 14:44:41 +020029
30static u32 start_time;
31
32int board_early_init_f(void)
33{
Stefan Roese952e7762009-09-24 09:55:50 +020034 mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
35 mtdcr(UIC0ER, 0x00000000); /* disable all ints */
36 mtdcr(UIC0CR, 0x00000000);
37 mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
38 mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
39 mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
40 mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
Stefan Roese779e9752007-08-14 14:44:41 +020041
42 /*
43 * Configure CPC0_PCI to enable PerWE as output
44 */
Stefan Roesed1c3b272009-09-09 16:25:29 +020045 mtdcr(CPC0_PCI, CPC0_PCI_SPE);
Stefan Roese779e9752007-08-14 14:44:41 +020046
47 return 0;
48}
49
50int misc_init_r(void)
51{
52 u32 pbcr;
53 int size_val = 0;
54 u32 post_magic;
55 u32 post_val;
56
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020057 post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
58 post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
Stefan Roese779e9752007-08-14 14:44:41 +020059 if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
60 /*
61 * Set special bootline bootparameter to pass this POST boot
62 * mode to Linux to reset the username/password
63 */
64 setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes");
65
66 /*
67 * Normally don't run POST tests, only when enabled
68 * via the sw-reset button. So disable further tests
69 * upon next bootup here.
70 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020071 out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_NOP);
Stefan Roese779e9752007-08-14 14:44:41 +020072 } else {
73 /*
74 * Only run POST when initiated via the sw-reset button mechanism
75 */
76 post_word_store(0);
77 }
78
79 /*
80 * Get current time
81 */
82 start_time = get_timer(0);
83
84 /*
85 * FLASH stuff...
86 */
87
88 /* Re-do sizing to get full correct info */
89
90 /* adjust flash start and offset */
Stefan Roesed1c3b272009-09-09 16:25:29 +020091 mfebc(PB0CR, pbcr);
Stefan Roese779e9752007-08-14 14:44:41 +020092 switch (gd->bd->bi_flashsize) {
93 case 1 << 20:
94 size_val = 0;
95 break;
96 case 2 << 20:
97 size_val = 1;
98 break;
99 case 4 << 20:
100 size_val = 2;
101 break;
102 case 8 << 20:
103 size_val = 3;
104 break;
105 case 16 << 20:
106 size_val = 4;
107 break;
108 case 32 << 20:
109 size_val = 5;
110 break;
111 case 64 << 20:
112 size_val = 6;
113 break;
114 case 128 << 20:
115 size_val = 7;
116 break;
117 }
118 pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
Stefan Roesed1c3b272009-09-09 16:25:29 +0200119 mtebc(PB0CR, pbcr);
Stefan Roese779e9752007-08-14 14:44:41 +0200120
121 /*
122 * Re-check to get correct base address
123 */
124 flash_get_size(gd->bd->bi_flashstart, 0);
125
126 /* Monitor protection ON by default */
127 (void)flash_protect(FLAG_PROTECT_SET,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128 -CONFIG_SYS_MONITOR_LEN,
Stefan Roese779e9752007-08-14 14:44:41 +0200129 0xffffffff,
130 &flash_info[0]);
131
132 /* Env protection ON by default */
133 (void)flash_protect(FLAG_PROTECT_SET,
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200134 CONFIG_ENV_ADDR_REDUND,
135 CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
Stefan Roese779e9752007-08-14 14:44:41 +0200136 &flash_info[0]);
137
138 return 0;
139}
140
141/*
142 * Check Board Identity:
143 */
144int checkboard(void)
145{
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +0000146 char buf[64];
147 int i = getenv_f("serial#", buf, sizeof(buf));
Stefan Roese779e9752007-08-14 14:44:41 +0200148
149 puts("Board: Zeus-");
150
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151 if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_ZEUS_PE))
Stefan Roese779e9752007-08-14 14:44:41 +0200152 puts("PE");
153 else
154 puts("CE");
155
156 puts(" of BulletEndPoint");
157
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +0000158 if (i > 0) {
Stefan Roese779e9752007-08-14 14:44:41 +0200159 puts(", serial# ");
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +0000160 puts(buf);
Stefan Roese779e9752007-08-14 14:44:41 +0200161 }
162 putc('\n');
163
164 /* both LED's off */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200165 gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
166 gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
Stefan Roese779e9752007-08-14 14:44:41 +0200167 udelay(10000);
168 /* and on again */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169 gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 1);
170 gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 1);
Stefan Roese779e9752007-08-14 14:44:41 +0200171
172 return (0);
173}
174
Stefan Roese779e9752007-08-14 14:44:41 +0200175static int default_env_var(char *buf, char *var)
176{
177 char *ptr;
178 char *val;
179
180 /*
181 * Find env variable
182 */
183 ptr = strstr(buf + 4, var);
184 if (ptr == NULL) {
185 printf("ERROR: %s not found!\n", var);
186 return -1;
187 }
188 ptr += strlen(var) + 1;
189
190 /*
191 * Now the ethaddr needs to be updated in the "normal"
192 * environment storage -> redundant flash.
193 */
194 val = ptr;
195 setenv(var, val);
196 printf("Updated %s from eeprom to %s!\n", var, val);
197
198 return 0;
199}
200
201static int restore_default(void)
202{
203 char *buf;
204 char *buf_save;
205 u32 crc;
206
Wolfgang Denkea882ba2010-06-20 23:33:59 +0200207 set_default_env("");
Stefan Roese779e9752007-08-14 14:44:41 +0200208
Stefan Roese779e9752007-08-14 14:44:41 +0200209 gd->env_valid = 1;
210
211 /*
212 * Read board specific values from I2C EEPROM
213 * and set env variables accordingly
214 * -> ethaddr, eth1addr, serial#
215 */
216 buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
Wolfgang Denkea882ba2010-06-20 23:33:59 +0200217 if (buf == NULL) {
218 printf("ERROR: malloc() failed\n");
219 return -1;
220 }
Stefan Roese779e9752007-08-14 14:44:41 +0200221 if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
222 (u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
223 puts("\nError reading EEPROM!\n");
224 } else {
225 crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
226 if (crc != *(u32 *)buf) {
Stefan Roeseb0021442008-07-10 09:58:06 +0200227 printf("ERROR: crc mismatch %08x %08x\n", crc, *(u32 *)buf);
Stefan Roese779e9752007-08-14 14:44:41 +0200228 return -1;
229 }
230
231 default_env_var(buf, "ethaddr");
232 buf += 8 + 18;
233 default_env_var(buf, "eth1addr");
234 buf += 9 + 18;
235 default_env_var(buf, "serial#");
236 }
237
238 /*
239 * Finally save updated env variables back to flash
240 */
241 saveenv();
242
243 free(buf_save);
244
245 return 0;
246}
247
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200248int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Stefan Roese779e9752007-08-14 14:44:41 +0200249{
250 char *buf;
251 char *buf_save;
252 char str[32];
253 u32 crc;
254 char var[32];
255
256 if (argc < 4) {
257 puts("ERROR!\n");
258 return -1;
259 }
260
261 buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
262 memset(buf, 0, FACTORY_RESET_ENV_SIZE);
263
264 strcpy(var, "ethaddr");
265 printf("Setting %s to %s\n", var, argv[1]);
266 sprintf(str, "%s=%s", var, argv[1]);
267 strcpy(buf + 4, str);
268 buf += strlen(str) + 1;
269
270 strcpy(var, "eth1addr");
271 printf("Setting %s to %s\n", var, argv[2]);
272 sprintf(str, "%s=%s", var, argv[2]);
273 strcpy(buf + 4, str);
274 buf += strlen(str) + 1;
275
276 strcpy(var, "serial#");
277 printf("Setting %s to %s\n", var, argv[3]);
278 sprintf(str, "%s=%s", var, argv[3]);
279 strcpy(buf + 4, str);
280
281 crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4);
282 *(u32 *)buf_save = crc;
283
284 if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
285 (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) {
286 puts("\nError writing EEPROM!\n");
287 return -1;
288 }
289
290 free(buf_save);
291
292 return 0;
293}
294
295U_BOOT_CMD(
296 setdef, 4, 1, do_set_default,
Peter Tyser2fb26042009-01-27 18:03:12 -0600297 "write board-specific values to EEPROM (ethaddr...)",
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200298 "ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
Stefan Roese779e9752007-08-14 14:44:41 +0200299 );
300
301static inline int sw_reset_pressed(void)
302{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200303 return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_SW_RESET));
Stefan Roese779e9752007-08-14 14:44:41 +0200304}
305
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200306int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char * const argv[])
Stefan Roese779e9752007-08-14 14:44:41 +0200307{
308 int delta;
309 int count = 0;
310 int post = 0;
311 int factory_reset = 0;
312
313 if (!sw_reset_pressed()) {
314 printf("SW-Reset already high (Button released)\n");
315 printf("-> No action taken!\n");
316 return 0;
317 }
318
319 printf("Waiting for SW-Reset button to be released.");
320
321 while (1) {
322 delta = get_timer(start_time);
323 if (!sw_reset_pressed())
324 break;
325
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326 if ((delta > CONFIG_SYS_TIME_POST) && !post) {
Stefan Roese779e9752007-08-14 14:44:41 +0200327 printf("\nWhen released now, POST tests will be started.");
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200328 gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
Stefan Roese779e9752007-08-14 14:44:41 +0200329 post = 1;
330 }
331
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332 if ((delta > CONFIG_SYS_TIME_FACTORY_RESET) && !factory_reset) {
Stefan Roese779e9752007-08-14 14:44:41 +0200333 printf("\nWhen released now, factory default values"
334 " will be restored.");
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335 gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
Stefan Roese779e9752007-08-14 14:44:41 +0200336 factory_reset = 1;
337 }
338
339 udelay(1000);
340 if (!(count++ % 1000))
341 printf(".");
342 }
343
344
345 printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
346
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347 if (delta > CONFIG_SYS_TIME_FACTORY_RESET) {
Stefan Roese779e9752007-08-14 14:44:41 +0200348 printf("Starting factory reset value restoration...\n");
349
350 /*
351 * Restore default setting
352 */
353 restore_default();
354
355 /*
356 * Reset the board for default to become valid
357 */
358 do_reset(NULL, 0, 0, NULL);
359
360 return 0;
361 }
362
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363 if (delta > CONFIG_SYS_TIME_POST) {
Stefan Roese779e9752007-08-14 14:44:41 +0200364 printf("Starting POST configuration...\n");
365
366 /*
367 * Enable POST upon next bootup
368 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200369 out_be32((void *)CONFIG_SYS_POST_MAGIC, REBOOT_MAGIC);
370 out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_DO_POST);
Stefan Roese779e9752007-08-14 14:44:41 +0200371 post_bootmode_init();
372
373 /*
374 * Reset the logbuffer for a clean start
375 */
376 logbuff_reset();
377
378 do_reset(NULL, 0, 0, NULL);
379
380 return 0;
381 }
382
383 return 0;
384}
385
386U_BOOT_CMD (
387 chkreset, 1, 1, do_chkreset,
Peter Tyser2fb26042009-01-27 18:03:12 -0600388 "Check for status of SW-reset button and act accordingly",
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200389 ""
Stefan Roese779e9752007-08-14 14:44:41 +0200390);
391
392#if defined(CONFIG_POST)
393/*
394 * Returns 1 if keys pressed to start the power-on long-running tests
395 * Called from board_init_f().
396 */
397int post_hotkeys_pressed(void)
398{
399 u32 post_magic;
400 u32 post_val;
401
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200402 post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
403 post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
Stefan Roese779e9752007-08-14 14:44:41 +0200404
405 if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
406 return 1;
407 else
408 return 0;
409}
410#endif /* CONFIG_POST */