blob: 3837b8f1391a232ba222eaec02e76bf4ebe224e3 [file] [log] [blame]
Matthias Fuchs8ba132c2007-12-28 17:07:24 +01001/*
Matthias Fuchs76b565b2008-10-28 13:36:58 +01002 * (C) Copyright 2007-2008
Matthias Fuchs8ba132c2007-12-28 17:07:24 +01003 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
4 * Based on the sequoia configuration file.
5 *
6 * (C) Copyright 2006-2007
7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
8 *
9 * (C) Copyright 2006
10 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
11 * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * MA 02111-1307 USA
27 */
28
29/************************************************************************
30 * PMC440.h - configuration for esd PMC440 boards
31 ***********************************************************************/
32#ifndef __CONFIG_H
33#define __CONFIG_H
34
35/*-----------------------------------------------------------------------
36 * High Level Configuration Options
37 *----------------------------------------------------------------------*/
38#define CONFIG_440EPX 1 /* Specific PPC440EPx */
39#define CONFIG_440 1 /* ... PPC440 family */
40#define CONFIG_4xx 1 /* ... PPC4xx family */
41
Wolfgang Denk2ae18242010-10-06 09:05:45 +020042#ifndef CONFIG_SYS_TEXT_BASE
43#define CONFIG_SYS_TEXT_BASE 0xFFF90000
44#endif
45
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010046#define CONFIG_SYS_CLK_FREQ 33333400
47
Matthias Fuchsff41ffc2008-01-11 14:55:16 +010048#if 0 /* temporary disabled because OS/9 does not like dcache on startup */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010049#define CONFIG_4xx_DCACHE /* enable dcache */
Matthias Fuchsff41ffc2008-01-11 14:55:16 +010050#endif
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010051
52#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
Matthias Fuchs76b565b2008-10-28 13:36:58 +010053#define CONFIG_MISC_INIT_F 1
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010054#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
55#define CONFIG_BOARD_TYPES 1 /* support board types */
56/*-----------------------------------------------------------------------
57 * Base addresses -- Note these are effective addresses where the
58 * actual resources get mapped (not physical addresses)
59 *----------------------------------------------------------------------*/
Wolfgang Denk14d0a022010-10-07 21:51:12 +020060#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020061#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserve 256 kB for malloc() */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010062
63#define CONFIG_PRAM 0 /* use pram variable to overwrite */
64
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020065#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000
66#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
67#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */
Wolfgang Denk14d0a022010-10-07 21:51:12 +020068#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020069#define CONFIG_SYS_NAND_ADDR 0xd0000000 /* NAND Flash */
70#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
71#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE
72#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */
73#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
74#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000
75#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
76#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
77#define CONFIG_SYS_PCI_MEMSIZE 0x80000000 /* 2GB! */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010078
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020079#define CONFIG_SYS_USB2D0_BASE 0xe0000100
80#define CONFIG_SYS_USB_DEVICE 0xe0000000
81#define CONFIG_SYS_USB_HOST 0xe0000400
82#define CONFIG_SYS_FPGA_BASE0 0xef000000 /* 32 bit */
83#define CONFIG_SYS_FPGA_BASE1 0xef100000 /* 16 bit */
Matthias Fuchs76b565b2008-10-28 13:36:58 +010084#define CONFIG_SYS_RESET_BASE 0xef200000
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010085
86/*-----------------------------------------------------------------------
87 * Initial RAM & stack pointer
88 *----------------------------------------------------------------------*/
89/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020090#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
Wolfgang Denk553f0982010-10-26 13:32:32 +020091#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +020092#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Michael Zaidman800eb092010-09-20 08:51:53 +020093#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +010094
95/*-----------------------------------------------------------------------
96 * Serial Port
97 *----------------------------------------------------------------------*/
Stefan Roese550650d2010-09-20 16:05:31 +020098#define CONFIG_CONS_INDEX 1 /* Use UART0 */
99#define CONFIG_SYS_NS16550
100#define CONFIG_SYS_NS16550_SERIAL
101#define CONFIG_SYS_NS16550_REG_SIZE 1
102#define CONFIG_SYS_NS16550_CLK get_serial_clock()
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#undef CONFIG_SYS_EXT_SERIAL_CLOCK
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100104#define CONFIG_BAUDRATE 115200
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100105
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_BAUDRATE_TABLE \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100107 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
108
109/*-----------------------------------------------------------------------
110 * Environment
111 *----------------------------------------------------------------------*/
112#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200113#define CONFIG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100114#else
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +0200115#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200116#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100117#endif
118
119/*-----------------------------------------------------------------------
120 * RTC
121 *----------------------------------------------------------------------*/
122#define CONFIG_RTC_RX8025
123
124/*-----------------------------------------------------------------------
125 * FLASH related
126 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200128#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100129
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200130#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100131
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200132#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
133#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100134
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
136#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100137
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
139#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100140
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
142#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100143
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200144#ifdef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200145#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100147#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100148
149/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200150#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
151#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100152#endif
153
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200154#ifdef CONFIG_ENV_IS_IN_EEPROM
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200155#define CONFIG_ENV_OFFSET 0 /* environment starts at the beginning of the EEPROM */
156#define CONFIG_ENV_SIZE 0x1000 /* 4096 bytes may be used for env vars */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100157#endif
158
159/*
160 * IPL (Initial Program Loader, integrated inside CPU)
161 * Will load first 4k from NAND (SPL) into cache and execute it from there.
162 *
163 * SPL (Secondary Program Loader)
164 * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
165 * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
166 * controller and the NAND controller so that the special U-Boot image can be
167 * loaded from NAND to SDRAM.
168 *
169 * NUB (NAND U-Boot)
170 * This NAND U-Boot (NUB) is a special U-Boot version which can be started
171 * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
172 *
173 * On 440EPx the SPL is copied to SDRAM before the NAND controller is
174 * set up. While still running from cache, I experienced problems accessing
175 * the NAND controller. sr - 2006-08-25
176 */
Matthias Fuchs7d5d7562008-01-08 11:13:09 +0100177#if defined (CONFIG_NAND_U_BOOT)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
179#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
180#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here */
181#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
182#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
183#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100184
185/*
186 * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
187 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
189#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100190
191/*
192 * Now the NAND chip has to be defined (no autodetection used!)
193 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200194#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */
195#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
196#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */
197#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
198#undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100199
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200200#define CONFIG_SYS_NAND_ECCSIZE 256
201#define CONFIG_SYS_NAND_ECCBYTES 3
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_NAND_OOBSIZE 16
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
Matthias Fuchs7d5d7562008-01-08 11:13:09 +0100204#endif
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100205
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +0200206#ifdef CONFIG_ENV_IS_IN_NAND
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100207/*
208 * For NAND booting the environment is embedded in the U-Boot image. Please take
209 * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
210 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
212#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200213#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100214#endif
215
216/*-----------------------------------------------------------------------
217 * DDR SDRAM
218 *----------------------------------------------------------------------*/
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100219#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
220#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
221#endif
Jean-Christophe PLAGNIOL-VILLARD3aed3aa2008-12-14 10:29:39 +0100222#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
223 /* 440EPx errata CHIP 11 */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100224
225/*-----------------------------------------------------------------------
226 * I2C
227 *----------------------------------------------------------------------*/
228#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
229#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Stefan Roesed0b0dca2010-04-01 14:37:24 +0200230#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100231#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200232#define CONFIG_SYS_I2C_SLAVE 0x7F
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100233
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100234#define CONFIG_I2C_MULTI_BUS 1
235
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200236#define CONFIG_SYS_I2C_MULTI_EEPROMS
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100237
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
239#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
240#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
241#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
242#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100243
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_EEPROM_WREN 1
245#define CONFIG_SYS_I2C_BOOT_EEPROM_ADDR 0x52
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100246
247/*
248 * standard dtt sensor configuration - bottom bit will determine local or
249 * remote sensor of the TMP401
250 */
251#define CONFIG_DTT_SENSORS { 0, 1 }
252
253/*
254 * The PMC440 uses a TI TMP401 temperature sensor. This part
255 * is basically compatible to the ADM1021 that is supported
256 * by U-Boot.
257 *
258 * - i2c addr 0x4c
259 * - conversion rate 0x02 = 0.25 conversions/second
260 * - ALERT ouput disabled
261 * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
262 * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
263 */
264#define CONFIG_DTT_ADM1021
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_DTT_ADM1021 { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100266
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100267#define CONFIG_PREBOOT "echo Add \\\"run fpga\\\" and " \
268 "\\\"painit\\\" to preboot command"
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100269
270#undef CONFIG_BOOTARGS
271
272/* Setup some board specific values for the default environment variables */
273#define CONFIG_HOSTNAME pmc440
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100274#define CONFIG_SYS_BOOTFILE "bootfile=/tftpboot/pmc440/uImage\0"
275#define CONFIG_SYS_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100276
277#define CONFIG_EXTRA_ENV_SETTINGS \
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100278 CONFIG_SYS_BOOTFILE \
279 CONFIG_SYS_ROOTPATH \
280 "fdt_file=/tftpboot/pmc440/pmc440.dtb\0" \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100281 "netdev=eth0\0" \
Matthias Fuchsff41ffc2008-01-11 14:55:16 +0100282 "ethrotate=no\0" \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100283 "nfsargs=setenv bootargs root=/dev/nfs rw " \
284 "nfsroot=${serverip}:${rootpath}\0" \
285 "ramargs=setenv bootargs root=/dev/ram rw\0" \
286 "addip=setenv bootargs ${bootargs} " \
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100287 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
288 ":${hostname}:${netdev}:off panic=1\0" \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100289 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100290 "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \
291 "nandargs=setenv bootargs root=/dev/mtdblock6 rootfstype=jffs2 rw\0" \
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100292 "nand_boot_fdt=run nandargs addip addtty addmisc;" \
293 "bootm ${kernel_addr} - ${fdt_addr}\0" \
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100294 "net_nfs_fdt=tftp ${kernel_addr_r} ${bootfile};" \
295 "tftp ${fdt_addr_r} ${fdt_file};" \
296 "run nfsargs addip addtty addmisc;" \
297 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
298 "kernel_addr=ffc00000\0" \
299 "kernel_addr_r=200000\0" \
300 "fpga_addr=fff00000\0" \
301 "fdt_addr=fff80000\0" \
302 "fdt_addr_r=800000\0" \
303 "fpga=fpga loadb 0 ${fpga_addr}\0" \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100304 "load=tftp 200000 /tftpboot/pmc440/u-boot.bin\0" \
Matthias Fuchs5baefbb2010-07-26 17:17:53 +0200305 "update=protect off fff90000 ffffffff;era fff90000 ffffffff;" \
306 "cp.b 200000 fff90000 70000\0" \
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100307 ""
308
309#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
310
311#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100313
Ben Warren96e21f82008-10-27 23:50:15 -0700314#define CONFIG_PPC4xx_EMAC
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100315#define CONFIG_IBM_EMAC4_V4 1
316#define CONFIG_MII 1 /* MII PHY management */
317#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
318
319#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
320
321#define CONFIG_HAS_ETH0
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200322#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100323
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100324#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
325#define CONFIG_PHY1_ADDR 1
326#define CONFIG_RESET_PHY_R 1
327
328/* USB */
329#define CONFIG_USB_OHCI_NEW
330#define CONFIG_USB_STORAGE
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200331#define CONFIG_SYS_OHCI_BE_CONTROLLER
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100332
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200333#define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
334#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
335#define CONFIG_SYS_USB_OHCI_REGS_BASE CONFIG_SYS_USB_HOST
336#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
337#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100338
339/* Comment this out to enable USB 1.1 device */
340#define USB_2_0_DEVICE
341
342/* Partitions */
343#define CONFIG_MAC_PARTITION
344#define CONFIG_DOS_PARTITION
345#define CONFIG_ISO_PARTITION
346
347#include <config_cmd_default.h>
348
349#define CONFIG_CMD_BSP
350#define CONFIG_CMD_DATE
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100351#define CONFIG_CMD_DHCP
352#define CONFIG_CMD_DTT
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100353#define CONFIG_CMD_EEPROM
354#define CONFIG_CMD_ELF
355#define CONFIG_CMD_FAT
356#define CONFIG_CMD_I2C
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100357#define CONFIG_CMD_MII
358#define CONFIG_CMD_NAND
359#define CONFIG_CMD_NET
360#define CONFIG_CMD_NFS
361#define CONFIG_CMD_PCI
362#define CONFIG_CMD_PING
363#define CONFIG_CMD_USB
364#define CONFIG_CMD_REGINFO
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100365
366/* POST support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200367#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
368 CONFIG_SYS_POST_CPU | \
369 CONFIG_SYS_POST_UART | \
370 CONFIG_SYS_POST_I2C | \
371 CONFIG_SYS_POST_CACHE | \
372 CONFIG_SYS_POST_FPU | \
373 CONFIG_SYS_POST_ETHER | \
374 CONFIG_SYS_POST_SPR)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100375
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100376#define CONFIG_LOGBUFFER
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100377#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100378
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200379#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100380
381#define CONFIG_SUPPORT_VFAT
382
383/*-----------------------------------------------------------------------
384 * Miscellaneous configurable options
385 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200386#define CONFIG_SYS_LONGHELP /* undef to save memory */
387#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Stefan Roesebe88b162008-01-17 07:50:17 +0100388#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100390#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200391#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100392#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
394#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
395#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100396
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
398#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100399
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200400#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
401#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100402
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200403#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100404
405#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
406#define CONFIG_LOOPW 1 /* enable loopw command */
407#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
408#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
409#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
410
411#define CONFIG_AUTOBOOT_KEYED 1
Wolfgang Denkc37207d2008-07-16 16:38:59 +0200412#define CONFIG_AUTOBOOT_PROMPT \
413 "Press SPACE to abort autoboot in %d seconds\n", bootdelay
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100414#undef CONFIG_AUTOBOOT_DELAY_STR
415#define CONFIG_AUTOBOOT_STOP_STR " "
416
417/*-----------------------------------------------------------------------
418 * PCI stuff
419 *----------------------------------------------------------------------*/
420/* General PCI */
421#define CONFIG_PCI /* include pci support */
422#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200423#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100424#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200425#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100426
427/* Board-specific PCI */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200428#define CONFIG_SYS_PCI_TARGET_INIT
429#define CONFIG_SYS_PCI_MASTER_INIT
Stefan Roesea760b022009-11-12 16:41:09 +0100430#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100431
Matthias Fuchs2fe6b7f2011-10-13 15:12:22 +0200432#define CONFIG_PCI_BOOTDELAY 0
433
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100434/* PCI identification */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200435#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
436#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441 /* PCI Device ID: Non-Monarch */
437#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440 /* PCI Device ID: Monarch */
Stefan Roese10954932009-11-12 12:00:49 +0100438/* for weak __pci_target_init() */
439#define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200440#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC
441#define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100442
443/*
444 * For booting Linux, the board info and command line data
445 * have to be in the first 8 MB of memory, since this is
446 * the maximum mapped by the Linux kernel during initialization.
447 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200448#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100449
450/*-----------------------------------------------------------------------
451 * FPGA stuff
452 *----------------------------------------------------------------------*/
453#define CONFIG_FPGA
454#define CONFIG_FPGA_XILINX
455#define CONFIG_FPGA_SPARTAN2
456#define CONFIG_FPGA_SPARTAN3
457
458#define CONFIG_FPGA_COUNT 2
459/*-----------------------------------------------------------------------
460 * External Bus Controller (EBC) Setup
461 *----------------------------------------------------------------------*/
462
463/*
464 * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
465 */
466#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200467#define CONFIG_SYS_NAND_CS 2 /* NAND chip connected to CSx */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100468
469/* Memory Bank 0 (NOR-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200470#define CONFIG_SYS_EBC_PB0AP 0x03017200
471#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100472
473/* Memory Bank 2 (NAND-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200474#define CONFIG_SYS_EBC_PB2AP 0x018003c0
475#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_NAND_ADDR | 0x1c000)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100476#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200477#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100478/* Memory Bank 2 (NOR-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200479#define CONFIG_SYS_EBC_PB2AP 0x03017200
480#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FLASH_BASE | 0xda000)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100481
482/* Memory Bank 0 (NAND-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200483#define CONFIG_SYS_EBC_PB0AP 0x018003c0
484#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100485#endif
486
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100487/* Memory Bank 1 (RESET) initialization */
Wolfgang Denk455ae7e2008-12-16 01:02:17 +0100488#define CONFIG_SYS_EBC_PB1AP 0x7f817200 /* 0x03017200 */
Jean-Christophe PLAGNIOL-VILLARD3aed3aa2008-12-14 10:29:39 +0100489#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_RESET_BASE | 0x1c000)
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100490
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100491/* Memory Bank 4 (FPGA / 32Bit) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200492#define CONFIG_SYS_EBC_PB4AP 0x03840f40 /* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */
493#define CONFIG_SYS_EBC_PB4CR (CONFIG_SYS_FPGA_BASE0 | 0x1c000) /* BS=1M,BU=R/W,BW=32bit */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100494
495/* Memory Bank 5 (FPGA / 16Bit) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200496#define CONFIG_SYS_EBC_PB5AP 0x03840f40 /* BME=0,TWT=3,CSN=1,TH=0,RE=1,SOR=0,BEM=1 */
497#define CONFIG_SYS_EBC_PB5CR (CONFIG_SYS_FPGA_BASE1 | 0x1a000) /* BS=1M,BU=R/W,BW=16bit */
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100498
499/*-----------------------------------------------------------------------
500 * NAND FLASH
501 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200502#define CONFIG_SYS_MAX_NAND_DEVICE 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200503#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
504#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
505#define CONFIG_SYS_NAND_QUIET_TEST 1
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100506
Stefan Roesebe88b162008-01-17 07:50:17 +0100507#if defined(CONFIG_CMD_KGDB)
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100508#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
509#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
510#endif
511
512/* pass open firmware flat tree */
513#define CONFIG_OF_LIBFDT 1
514#define CONFIG_OF_BOARD_SETUP 1
515
Matthias Fuchs76b565b2008-10-28 13:36:58 +0100516#define CONFIG_API 1
517
Matthias Fuchs8ba132c2007-12-28 17:07:24 +0100518#endif /* __CONFIG_H */