Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 39b823381d9d27537c032010bdaf005aa60df9a3 / . / drivers / phy / Kconfig
blob: da644462d9f198a497b8cdbac1f3079366357d39 [file] [log] [blame]
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]1
2menu "PHY Subsystem"
3
4config PHY
5 bool "PHY Core"
6 depends on DM
7 help
8 PHY support.
9
10 This framework is designed to provide a generic interface for PHY
11 devices. PHY devices are dedicated hardware that handle the physical
12 layer of the protocols in the OSI model.
13 PHYs are commonly used for high speed interfaces such as Serial-ATA
14 or PCI express.
15 The API provides functions to initialize/deinitialize the
16 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
17 compatible as possible with the equivalent framework found in the
18 linux kernel.
19
20config SPL_PHY
21 bool "PHY Core in SPL"
Adam Forda0746672019-08-24 13:50:34 -0500[diff] [blame]22 depends on DM && SPL
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]23 help
24 PHY support in SPL.
25
26 This framework is designed to provide a generic interface for PHY
27 devices. PHY devices are dedicated hardware that handle the physical
28 layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
29 PHYs are commonly used for high speed interfaces such as Serial-ATA
30 or PCI express.
31 The API provides functions to initialize/deinitialize the
32 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
33 compatible as possible with the equivalent framework found in the
34 linux kernel.
35
Jean-Jacques Hiblot86322f52017-04-24 11:51:28 +0200[diff] [blame]36config PHY_SANDBOX
37 bool "Sandbox PHY support"
38 depends on SANDBOX
39 depends on PHY
40 help
41 This select a dummy sandbox PHY driver. It used only to implement
42 the unit tests for the phy framework
43
Jean-Jacques Hiblot3b63db32017-07-24 15:18:15 +0200[diff] [blame]44config NOP_PHY
45 bool "NOP PHY driver"
46 depends on PHY
47 help
48 Support for a no-op PHY driver (stubbed PHY driver).
49
50 This is useful when a driver uses the PHY framework but no real PHY
51 hardware exists.
52
53config SPL_NOP_PHY
54 bool "NOP PHY driver in SPL"
55 depends on SPL_PHY
56 help
57 Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
58
59 This is useful when a driver uses the PHY framework but no real PHY
60 hardware exists.
61
Neil Armstrongafef2052020-12-29 14:58:58 +0100[diff] [blame]62config MIPI_DPHY_HELPERS
63 bool "MIPI D-PHY support helpers"
64 help
65 Provides a number of helpers a core functions for MIPI D-PHY drivers.
66
Stephan Gerhold4559df92021-07-08 20:33:49 +0200[diff] [blame]67config AB8500_USB_PHY
68 bool "AB8500 USB PHY Driver"
69 depends on PHY && PMIC_AB8500
70 help
71 Support for the USB OTG PHY in ST-Ericsson AB8500.
72
Álvaro Fernández Rojas8e948c62018-02-04 21:11:15 +0100[diff] [blame]73config BCM6318_USBH_PHY
74 bool "BCM6318 USBH PHY support"
75 depends on PHY && ARCH_BMIPS
76 select POWER_DOMAIN
77 help
78 Support for the Broadcom MIPS BCM6318 USBH PHY.
79
Álvaro Fernández Rojasbcb9b502018-02-04 11:18:24 +0100[diff] [blame]80config BCM6348_USBH_PHY
81 bool "BCM6348 USBH PHY support"
82 depends on PHY && ARCH_BMIPS
83 help
84 Support for the Broadcom MIPS BCM6348 USBH PHY.
85
Álvaro Fernández Rojas190c36b2018-02-04 11:19:11 +0100[diff] [blame]86config BCM6358_USBH_PHY
87 bool "BCM6358 USBH PHY support"
88 depends on PHY && ARCH_BMIPS
89 help
90 Support for the Broadcom MIPS BCM6358 USBH PHY.
91
Álvaro Fernández Rojasf55c1532018-02-04 21:10:13 +0100[diff] [blame]92config BCM6368_USBH_PHY
93 bool "BCM6368 USBH PHY support"
94 depends on PHY && ARCH_BMIPS
95 help
96 Support for the Broadcom MIPS BCM6368 USBH PHY.
97
Srinath Mannam3151fdd2020-04-02 16:08:12 +0530[diff] [blame]98config BCM_SR_PCIE_PHY
99 bool "Broadcom Stingray PCIe PHY driver"
100 depends on PHY
101 help
102 Enable this to support the Broadcom Stingray PCIe PHY
103 If unsure, say N.
104
Adam Fordfc582632019-07-10 13:59:09 -0500[diff] [blame]105config PHY_DA8XX_USB
106 tristate "TI DA8xx USB PHY Driver"
107 depends on PHY && ARCH_DAVINCI
108 help
109 Enable this to support the USB PHY on DA8xx SoCs.
110
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]111config PIPE3_PHY
112 bool "Support omap's PIPE3 PHY"
Jean-Jacques Hiblot6b26aae2017-07-07 12:13:34 +0200[diff] [blame]113 depends on PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]114 help
115 Support for the omap PIPE3 phy for sata
116
117 This PHY is found on omap devices supporting SATA such as dra7, am57x
118 and omap5
119
120config SPL_PIPE3_PHY
121 bool "Support omap's PIPE3 PHY in SPL"
Jean-Jacques Hiblot6b26aae2017-07-07 12:13:34 +0200[diff] [blame]122 depends on SPL_PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]123 help
124 Support for the omap PIPE3 phy for sata in SPL
125
126 This PHY is found on omap devices supporting SATA such as dra7, am57x
127 and omap5
128
Sekhar Nori888e1ca2019-08-01 19:12:58 +0530[diff] [blame]129config AM654_PHY
130 tristate "TI AM654 SERDES support"
131 depends on PHY && ARCH_K3
132 select REGMAP
133 select SYSCON
134 help
135 This option enables support for TI AM654 SerDes PHY used for
136 PCIe.
137
Patrice Chotardb7ca56d2017-09-05 11:04:21 +0200[diff] [blame]138config STI_USB_PHY
139 bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
140 depends on PHY && ARCH_STI
141 help
142 This is the generic phy driver for the picoPHY ports
143 used by USB2 and USB3 Host controllers available on
144 STiH407 SoC families.
145
Robert Markodec04202020-09-10 16:00:04 +0200[diff] [blame]146config PHY_QCOM_IPQ4019_USB
147 tristate "Qualcomm IPQ4019 USB PHY driver"
148 depends on PHY && ARCH_IPQ40XX
149 help
150 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
151
Marek Vasut66425882018-08-05 15:22:19 +0200[diff] [blame]152config PHY_RCAR_GEN2
153 tristate "Renesas R-Car Gen2 USB PHY"
154 depends on PHY && RCAR_GEN2
155 help
156 Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
157 PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
158 allows configuring the module multiplexing.
159
Marek Vasut6cfc3d62018-10-02 22:31:47 +0200[diff] [blame]160config PHY_RCAR_GEN3
161 tristate "Renesas R-Car Gen3 USB PHY"
162 depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
163 default y if RCAR_GEN3
164 help
165 Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
166 PHY connected to EHCI USB module and controls USB OTG operation.
167
Patrice Chotard3b291212018-04-27 11:01:55 +0200[diff] [blame]168config PHY_STM32_USBPHYC
169 tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
170 depends on PHY && ARCH_STM32MP
171 help
172 Enable this to support the High-Speed USB transceiver that is part of
173 STMicroelectronics STM32 SoCs.
174
175 This driver controls the entire USB PHY block: the USB PHY controller
176 (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
177 used by an HS USB Host controller, and the second one is shared
178 between an HS USB OTG controller and an HS USB Host controller,
179 selected by an USB switch.
180
Beniamino Galvanidf42f322019-08-18 15:42:54 +0200[diff] [blame]181config MESON_GXBB_USB_PHY
182 bool "Amlogic Meson GXBB USB PHY"
183 depends on PHY && ARCH_MESON && MESON_GXBB
184 imply REGMAP
185 help
186 This is the generic phy driver for the Amlogic Meson GXBB
187 USB2 PHY.
188
Neil Armstrong2960e272018-04-11 17:08:02 +0200[diff] [blame]189config MESON_GXL_USB_PHY
190 bool "Amlogic Meson GXL USB PHYs"
Neil Armstrong0ae87242020-09-10 10:48:16 +0200[diff] [blame]191 depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM || MESON_AXG)
Neil Armstrong2960e272018-04-11 17:08:02 +0200[diff] [blame]192 imply REGMAP
193 help
194 This is the generic phy driver for the Amlogic Meson GXL
195 USB2 and USB3 PHYS.
196
Neil Armstrong277d9162019-02-19 15:17:29 +0100[diff] [blame]197config MESON_G12A_USB_PHY
198 bool "Amlogic Meson G12A USB PHYs"
199 depends on PHY && ARCH_MESON && MESON_G12A
200 imply REGMAP
201 help
202 This is the generic phy driver for the Amlogic Meson G12A
203 USB2 and USB3 PHYS.
204
Neil Armstrong7ef19502020-12-29 14:59:00 +0100[diff] [blame]205config MESON_AXG_MIPI_DPHY
206 bool "Amlogic Meson AXG MIPI D-PHY"
207 depends on PHY && ARCH_MESON && MESON_AXG
208 select MIPI_DPHY_HELPERS
209 imply REGMAP
210 help
211 This is the generic phy driver for the Amlogic Meson AXG
212 MIPI D-PHY.
213
Neil Armstrong45475512020-12-29 14:59:01 +0100[diff] [blame]214config MESON_AXG_MIPI_PCIE_ANALOG_PHY
215 bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
216 depends on PHY && ARCH_MESON && MESON_AXG
217 select MIPI_DPHY_HELPERS
218 imply REGMAP
219 help
220 This is the generic phy driver for the Amlogic Meson AXG
221 MIPI PCIe Analog PHY.
222
Ramon Fried92454e42018-09-21 13:35:47 +0300[diff] [blame]223config MSM8916_USB_PHY
224 bool "Qualcomm MSM8916 USB PHY support"
225 depends on PHY
226 help
227 Support the USB PHY in msm8916
228
229 This PHY is found on qualcomm dragonboard410c development board.
230
Jean-Jacques Hiblot668257e2018-11-29 10:57:39 +0100[diff] [blame]231config OMAP_USB2_PHY
232 bool "Support OMAP's USB2 PHY"
233 depends on PHY
234 depends on SYSCON
235 help
236 Support for the OMAP's USB2 PHY.
237
238 This PHY is found on OMAP devices supporting USB2.
239
Jean-Jacques Hiblot4b127832018-12-04 11:12:59 +0100[diff] [blame]240
241config KEYSTONE_USB_PHY
242 bool "Support TI Keystone USB PHY"
243 depends on PHY
244 depends on ARCH_KEYSTONE
245 help
246 Support for the USB PHY found on some Keystone (k2) processors
247
248 This PHY is found on some Keystone (K2) devices supporting USB.
249
Weijie Gaob4f214f2020-11-12 16:36:48 +0800[diff] [blame]250config MT7620_USB_PHY
251 bool "MediaTek MT7620 USB PHY support"
252 depends on PHY
253 depends on SOC_MT7620
254 help
255 Support the intergated USB PHY in MediaTek MT7620 SoC
256
Stefan Roesed7d76062019-04-05 13:44:43 +0200[diff] [blame]257config MT76X8_USB_PHY
258 bool "MediaTek MT76x8 (7628/88) USB PHY support"
259 depends on PHY
Weijie Gao4cce5112019-09-25 17:45:31 +0800[diff] [blame]260 depends on SOC_MT7628
Stefan Roesed7d76062019-04-05 13:44:43 +0200[diff] [blame]261 help
262 Support the USB PHY in MT76x8 SoCs
263
264 This PHY is found on MT76x8 devices supporting USB.
265
Ryder Lee235bad02019-08-22 12:26:50 +0200[diff] [blame]266config PHY_MTK_TPHY
267 bool "MediaTek T-PHY Driver"
268 depends on PHY
269 depends on ARCH_MEDIATEK
270 help
271 MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
272 SATA, and meanwhile supports two version T-PHY which have
273 different banks layout, the T-PHY with shared banks between
274 multi-ports is first version, otherwise is second veriosn,
275 so you can easily distinguish them by banks layout.
276
Ye Li4266dc12021-02-21 08:26:21 -0800[diff] [blame]277config PHY_IMX8MQ_USB
278 bool "NXP i.MX8MQ USB PHY Driver"
279 depends on PHY
280 depends on IMX8MQ
281 help
282 Support the USB3.0 PHY in NXP i.MX8MQ SoC
283
Jagan Tekiac97a9e2020-05-26 11:33:44 +0800[diff] [blame]284source "drivers/phy/rockchip/Kconfig"
Alan Douglas39b82332021-07-21 21:28:36 +0530[diff] [blame^]285source "drivers/phy/cadence/Kconfig"
286
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]287endmenu