blob: 5276907b45ca249ad46f71c13aea47ae5dd4c316 [file] [log] [blame]
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +02001/*
2 * (C) Copyright 2003-2007
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * (C) Copyright 2004
6 * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
7 *
8 * (C) Copyright 2004-2005
9 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
10 *
11 * Adapted to U-Boot 1.2 by:
12 * Bartlomiej Sieka <tur@semihalf.com>:
13 * - HW ID readout from EEPROM
14 * - module detection
15 * Grzegorz Bernacki <gjb@semihalf.com>:
16 * - run-time SDRAM controller configuration
17 * - LIBFDT support
18 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +020019 * SPDX-License-Identifier: GPL-2.0+
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +020020 */
21
22#include <common.h>
23#include <mpc5xxx.h>
24#include <pci.h>
25#include <asm/processor.h>
26#include <i2c.h>
27#include <linux/ctype.h>
28
29#ifdef CONFIG_OF_LIBFDT
30#include <libfdt.h>
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +020031#include <fdt_support.h>
32#endif /* CONFIG_OF_LIBFDT */
33
34
35#include "cm5200.h"
36#include "fwupdate.h"
37
38DECLARE_GLOBAL_DATA_PTR;
39
40static hw_id_t hw_id;
41
42
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020043#ifndef CONFIG_SYS_RAMBOOT
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +020044/*
45 * Helper function to initialize SDRAM controller.
46 */
47static void sdram_start(int hi_addr, mem_conf_t *mem_conf)
48{
49 long hi_addr_bit = hi_addr ? 0x01000000 : 0;
50
51 /* unlock mode register */
52 *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000000 |
53 hi_addr_bit;
54
55 /* precharge all banks */
56 *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000002 |
57 hi_addr_bit;
58
59 /* auto refresh */
60 *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 |
61 hi_addr_bit;
62
63 /* auto refresh, second time */
64 *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 |
65 hi_addr_bit;
66
67 /* set mode register */
68 *(vu_long *)MPC5XXX_SDRAM_MODE = mem_conf->mode;
69
70 /* normal operation */
71 *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit;
72}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073#endif /* CONFIG_SYS_RAMBOOT */
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +020074
75
76/*
77 * Retrieve memory configuration for a given module. board_type is the index
78 * in hw_id_list[] corresponding to the module we are executing on; we return
79 * SDRAM controller settings approprate for this module.
80 */
81static mem_conf_t* get_mem_config(int board_type)
82{
83 switch(board_type){
84 case CM1_QA:
85 return memory_config[0];
86 case CM11_QA:
87 case CMU1_QA:
88 return memory_config[1];
89 default:
90 printf("ERROR: Unknown module, using a default SDRAM "
91 "configuration - things may not work!!!.\n");
92 return memory_config[0];
93 }
94}
95
96
97/*
98 * Initalize SDRAM - configure SDRAM controller, detect memory size.
99 */
Becky Bruce9973e3c2008-06-09 16:03:40 -0500100phys_size_t initdram(int board_type)
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200101{
102 ulong dramsize = 0;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#ifndef CONFIG_SYS_RAMBOOT
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200104 ulong test1, test2;
105 mem_conf_t *mem_conf;
106
107 mem_conf = get_mem_config(board_type);
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +0200108
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200109 /* configure SDRAM start/end for detection */
110 *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
111
112 /* setup config registers */
113 *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = mem_conf->config1;
114 *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2;
115
116 sdram_start(0, mem_conf);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200117 test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200118 sdram_start(1, mem_conf);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200119 test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200120 if (test1 > test2) {
121 sdram_start(0, mem_conf);
122 dramsize = test1;
123 } else
124 dramsize = test2;
125
126 /* memory smaller than 1MB is impossible */
127 if (dramsize < (1 << 20))
128 dramsize = 0;
129
130 /* set SDRAM CS0 size according to the amount of RAM found */
131 if (dramsize > 0) {
132 *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
133 __builtin_ffs(dramsize >> 20) - 1;
134 } else
135 *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#else /* CONFIG_SYS_RAMBOOT */
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200137 /* retrieve size of memory connected to SDRAM CS0 */
138 dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
139 if (dramsize >= 0x13)
140 dramsize = (1 << (dramsize - 0x13)) << 20;
141 else
142 dramsize = 0;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#endif /* !CONFIG_SYS_RAMBOOT */
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200144
145 /*
146 * On MPC5200B we need to set the special configuration delay in the
147 * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
148 * the MPC5200B User's Manual.
149 */
150 *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
151 __asm__ volatile ("sync");
152
153 return dramsize;
154}
155
156
157/*
158 * Read module hardware identification data from the I2C EEPROM.
159 */
160static void read_hw_id(hw_id_t hw_id)
161{
162 int i;
163 for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164 if (i2c_read(CONFIG_SYS_I2C_EEPROM,
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200165 hw_id_format[i].offset,
166 2,
167 (uchar *)&hw_id[i][0],
168 hw_id_format[i].length) != 0)
169 printf("ERROR: can't read HW ID from EEPROM\n");
170}
171
172
173/*
174 * Identify module we are running on, set gd->board_type to the index in
175 * hw_id_list[] corresponding to the module identifed, or to
176 * CM5200_UNKNOWN_MODULE if we can't identify the module.
177 */
178static void identify_module(hw_id_t hw_id)
179{
180 int i, j, element;
181 char match;
182 gd->board_type = CM5200_UNKNOWN_MODULE;
183 for (i = 0; i < sizeof (hw_id_list) / sizeof (char **); ++i) {
184 match = 1;
185 for (j = 0; j < sizeof (hw_id_identify) / sizeof (int); ++j) {
186 element = hw_id_identify[j];
187 if (strncmp(hw_id_list[i][element],
188 &hw_id[element][0],
189 hw_id_format[element].length) != 0) {
190 match = 0;
191 break;
192 }
193 }
194 if (match) {
195 gd->board_type = i;
196 break;
197 }
198 }
199}
200
201
202/*
203 * Compose string with module name.
204 * buf is assumed to have enough space, and be null-terminated.
205 */
206static void compose_module_name(hw_id_t hw_id, char *buf)
207{
208 char tmp[MODULE_NAME_MAXLEN];
209 strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length);
210 strncat(buf, ".", 1);
211 strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length);
212 strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length);
213 strncat(buf, " (", 2);
214 strncat(buf, &hw_id[IDENTIFICATION_NUMBER][0],
215 hw_id_format[IDENTIFICATION_NUMBER].length);
216 sprintf(tmp, " / %u.%u)",
217 hw_id[MAJOR_SW_VERSION][0],
218 hw_id[MINOR_SW_VERSION][0]);
219 strcat(buf, tmp);
220}
221
222
223/*
224 * Compose string with hostname.
225 * buf is assumed to have enough space, and be null-terminated.
226 */
227static void compose_hostname(hw_id_t hw_id, char *buf)
228{
229 char *p;
230 strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length);
231 strncat(buf, "_", 1);
232 strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length);
233 strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length);
234 for (p = buf; *p; ++p)
235 *p = tolower(*p);
236
237}
238
239
240#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
241/*
242 * Update 'model' and 'memory' properties in the blob according to the module
243 * that we are running on.
244 */
245static void ft_blob_update(void *blob, bd_t *bd)
246{
247 int len, ret, nodeoffset = 0;
248 char module_name[MODULE_NAME_MAXLEN] = {0};
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200249
250 compose_module_name(hw_id, module_name);
251 len = strlen(module_name) + 1;
252
253 ret = fdt_setprop(blob, nodeoffset, "model", module_name, len);
254 if (ret < 0)
255 printf("ft_blob_update(): cannot set /model property err:%s\n",
256 fdt_strerror(ret));
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200257}
258#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
259
260
261/*
262 * Read HW ID from I2C EEPROM and detect the modue we are running on. Note
263 * that we need to use local variable for readout, because global data is not
264 * writable yet (and we'll have to redo the readout later on).
265 */
266int checkboard(void)
267{
268 hw_id_t hw_id_tmp;
269 char module_name_tmp[MODULE_NAME_MAXLEN] = "";
270
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +0200271 /*
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200272 * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
273 * here despite the fact that it will be called again later on. We
274 * also use a little trick to silence I2C-related output.
275 */
276 gd->flags |= GD_FLG_SILENT;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277 i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200278 gd->flags &= ~GD_FLG_SILENT;
279
280 read_hw_id(hw_id_tmp);
281 identify_module(hw_id_tmp); /* this sets gd->board_type */
282 compose_module_name(hw_id_tmp, module_name_tmp);
283
284 if (gd->board_type != CM5200_UNKNOWN_MODULE)
285 printf("Board: %s\n", module_name_tmp);
286 else
287 printf("Board: unrecognized cm5200 module (%s)\n",
288 module_name_tmp);
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +0200289
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200290 return 0;
291}
292
293
294int board_early_init_r(void)
295{
296 /*
297 * Now, when we are in RAM, enable flash write access for detection
298 * process. Note that CS_BOOT cannot be cleared when executing in
299 * flash.
300 */
301 *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
302
303 /* Now that we can write to global data, read HW ID again. */
304 read_hw_id(hw_id);
305 return 0;
306}
307
308
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200309#ifdef CONFIG_MISC_INIT_R
310int misc_init_r(void)
311{
Heiko Schocherea818db2013-01-29 08:53:15 +0100312#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200313 uchar buf[6];
314 char str[18];
315 char hostname[MODULE_NAME_MAXLEN];
316
317 /* Read ethaddr from EEPROM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200318 if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200319 sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
320 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
321 /* Check if MAC addr is owned by Schindler */
322 if (strstr(str, "00:06:C3") != str)
323 printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
324 " in EEPROM.\n", str);
325 else {
326 printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
327 str);
328 setenv("ethaddr", str);
329 }
330 } else {
331 printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332 " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200333 CONFIG_MAC_OFFSET);
334 }
Heiko Schocherea818db2013-01-29 08:53:15 +0100335#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) */
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200336 if (!getenv("ethaddr"))
337 printf(LOG_PREFIX "MAC address not set, networking is not "
338 "operational\n");
339
340 /* set the hostname appropriate to the module we're running on */
Bartlomiej Sieka92869192007-10-05 09:46:06 +0200341 hostname[0] = 0x00;
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200342 compose_hostname(hw_id, hostname);
343 setenv("hostname", hostname);
344
345 return 0;
346}
347#endif /* CONFIG_MISC_INIT_R */
348
349
350#ifdef CONFIG_LAST_STAGE_INIT
351int last_stage_init(void)
352{
353#ifdef CONFIG_USB_STORAGE
354 cm5200_fwupdate();
355#endif /* CONFIG_USB_STORAGE */
356 return 0;
357}
358#endif /* CONFIG_LAST_STAGE_INIT */
359
360
361#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
Simon Glasse895a4b2014-10-23 18:58:47 -0600362int ft_board_setup(void *blob, bd_t *bd)
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200363{
364 ft_cpu_setup(blob, bd);
365 ft_blob_update(blob, bd);
Simon Glasse895a4b2014-10-23 18:58:47 -0600366
367 return 0;
Bartlomiej Sieka86b116b2007-08-03 12:08:16 +0200368}
369#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */