blob: efe7cb21512dc74cf1631f664aee14dc13bcb8b6 [file] [log] [blame]
wdenk16f21702002-08-26 21:58:50 +00001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <mpc8xx.h>
26
27/* ------------------------------------------------------------------------- */
28
29static long int dram_size (long int, long int *, long int);
30static void read_hw_vers (void);
31
32/* ------------------------------------------------------------------------- */
33
34#define _NOT_USED_ 0xFFFFFFFF
35
36const uint sdram_table[] = {
37
38 /* single read (offset 0x00 in upm ram) */
39
40 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
41 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
42
43 /* burst read (offset 0x08 in upm ram) */
44
45 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
46 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
47 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
48 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
49
50 /* single write (offset 0x18 in upm ram) */
51
52 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
53 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
54
55 /* burst write (offset 0x20 in upm ram) */
56
57 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
58 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
59
60 /* init part1 (offset 0x28 in upm ram) */
61
62 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
63 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
64
65 /* refresh (offset 0x30 in upm ram) */
66
67 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
68
69 /* init part2 (offset 0x34 in upm ram) */
70
71 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
72 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
73
74 /* exception (offset 0x3C in upm ram) */
75
76 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
77
78};
79
80/* ------------------------------------------------------------------------- */
81
82
83/*
84 * Check Board Identity:
85 *
86 * Test ETX ID string (ETX_xxx...)
87 *
88 * Return 1 always.
89 */
90
91int checkboard (void)
92{
93 DECLARE_GLOBAL_DATA_PTR;
94
95 unsigned char *s = getenv ("serial#");
96 unsigned char *e;
97
98 puts ("Board: ");
99
100#ifdef SB_ETX094
101 gd->board_type = 0; /* 0 = 2SDRAM-Device */
102#else
103 gd->board_type = 1; /* 1 = 1SDRAM-Device */
104#endif
105
106 if (!s || strncmp (s, "ETX_", 4)) {
107 puts ("### No HW ID - assuming ETX_094\n");
108 read_hw_vers ();
109 return (0);
110 }
111
112 for (e = s; *e; ++e) {
113 if (*e == ' ')
114 break;
115 }
116
117 for (; s < e; ++s) {
118 putc (*s);
119 }
120 putc ('\n');
121
122 read_hw_vers ();
123 return (0);
124}
125
126/* ------------------------------------------------------------------------- */
127
128long int initdram (int board_type)
129{
130 volatile immap_t *immap = (immap_t *) CFG_IMMR;
131 volatile memctl8xx_t *memctl = &immap->im_memctl;
132 long int size_b0, size_b1, size8, size9;
133
134 upmconfig (UPMA, (uint *) sdram_table,
135 sizeof (sdram_table) / sizeof (uint));
136
137 /*
138 * Preliminary prescaler for refresh (depends on number of
139 * banks): This value is selected for four cycles every 62.4 us
140 * with two SDRAM banks or four cycles every 31.2 us with one
141 * bank. It will be adjusted after memory sizing.
142 */
143 memctl->memc_mptpr = CFG_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */
144
145 /* A3(SDRAM)=0 => Bursttype = Sequential
146 * A2-A0(SDRAM)=010 => Burst length = 4
147 * A4-A6(SDRAM)=010 => CasLat=2
148 */
149 memctl->memc_mar = 0x00000088;
150
151 /*
152 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
153 * preliminary addresses - these have to be modified after the
154 * SDRAM size has been determined.
155 */
156 memctl->memc_or2 = CFG_OR2_PRELIM;
157 memctl->memc_br2 = CFG_BR2_PRELIM;
158
159 if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
160 memctl->memc_or3 = CFG_OR3_PRELIM;
161 memctl->memc_br3 = CFG_BR3_PRELIM;
162 }
163
164 memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
165
166 udelay (200);
167
168 /* perform SDRAM initializsation sequence */
169
170 memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */
171 memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */
172 udelay (1);
173
174 if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
175 memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */
176 memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */
177 udelay (1);
178 }
179
180 memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
181
182 udelay (1000);
183
184 /*
185 * Check Bank 0 Memory Size for re-configuration
186 *
187 * try 8 column mode
188 */
189 size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
190 SDRAM_MAX_SIZE);
191
192 udelay (1000);
193
194 /*
195 * try 9 column mode
196 */
197 size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
198 SDRAM_MAX_SIZE);
199
200 if (size8 < size9) { /* leave configuration at 9 columns */
201 size_b0 = size9;
202/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
203 } else { /* back to 8 columns */
204 size_b0 = size8;
205 memctl->memc_mamr = CFG_MAMR_8COL;
206 udelay (500);
207/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
208 }
209
210 if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
211 /*
212 * Check Bank 1 Memory Size
213 * use current column settings
214 * [9 column SDRAM may also be used in 8 column mode,
215 * but then only half the real size will be used.]
216 */
217 size_b1 =
218 dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
219 SDRAM_MAX_SIZE);
220/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
221 } else {
222 size_b1 = 0;
223 }
224
225 udelay (1000);
226
227 /*
228 * Adjust refresh rate depending on SDRAM type, both banks
229 * For types > 128 MBit leave it at the current (fast) rate
230 */
231 if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
232 /* reduce to 15.6 us (62.4 us / quad) */
233 memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /*DIV16 */
234 udelay (1000);
235 }
236
237 /*
238 * Final mapping: map bigger bank first
239 */
240 if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
241
242 memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
243 memctl->memc_br3 =
244 (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
245
246 if (size_b0 > 0) {
247 /*
248 * Position Bank 0 immediately above Bank 1
249 */
250 memctl->memc_or2 =
251 ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
252 memctl->memc_br2 =
253 ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
254 + size_b1;
255 } else {
256 unsigned long reg;
257
258 /*
259 * No bank 0
260 *
261 * invalidate bank
262 */
263 memctl->memc_br2 = 0;
264
265 /* adjust refresh rate depending on SDRAM type, one bank */
266 reg = memctl->memc_mptpr;
267 reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
268 memctl->memc_mptpr = reg;
269 }
270
271 } else { /* SDRAM Bank 0 is bigger - map first */
272
273 memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
274 memctl->memc_br2 =
275 (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
276
277 if (size_b1 > 0) {
278 /*
279 * Position Bank 1 immediately above Bank 0
280 */
281 memctl->memc_or3 =
282 ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
283 memctl->memc_br3 =
284 ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
285 + size_b0;
286 } else {
287 unsigned long reg;
288
289 /*
290 * No bank 1
291 *
292 * invalidate bank
293 */
294 memctl->memc_br3 = 0;
295
296 /* adjust refresh rate depending on SDRAM type, one bank */
297 reg = memctl->memc_mptpr;
298 reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
299 memctl->memc_mptpr = reg;
300 }
301 }
302
303 udelay (10000);
304
305 return (size_b0 + size_b1);
306}
307
308/* ------------------------------------------------------------------------- */
309
310/*
311 * Check memory range for valid RAM. A simple memory test determines
312 * the actually available RAM size between addresses `base' and
313 * `base + maxsize'. Some (not all) hardware errors are detected:
314 * - short between address lines
315 * - short between data lines
316 */
317
318static long int dram_size (long int mamr_value, long int *base,
319 long int maxsize)
320{
321 volatile immap_t *immap = (immap_t *) CFG_IMMR;
322 volatile memctl8xx_t *memctl = &immap->im_memctl;
wdenk16f21702002-08-26 21:58:50 +0000323
324 memctl->memc_mamr = mamr_value;
325
wdenkc83bf6a2004-01-06 22:38:14 +0000326 return (get_ram_size(base, maxsize));
wdenk16f21702002-08-26 21:58:50 +0000327}
328
329/* ------------------------------------------------------------------------- */
330
331/* HW-ID Table (Bits: 2^9;2^7;2^5) */
332#define HW_ID_0 0x0000
333#define HW_ID_1 0x0020
334#define HW_ID_2 0x0080
335#define HW_ID_3 0x00a0
336#define HW_ID_4 0x0200
337#define HW_ID_5 0x0220
338#define HW_ID_6 0x0280
339#define HW_ID_7 0x02a0
340
341void read_hw_vers ()
342{
343 unsigned short rd_msk = 0x02A0;
344
345 /* HW-ID pin-definition */
346 volatile immap_t *immr = (immap_t *) CFG_IMMR;
347
348 immr->im_ioport.iop_pddir &= ~(rd_msk);
349 immr->im_ioport.iop_pdpar &= ~(rd_msk);
350
351 /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
352
353 /* Check the HW-ID */
354 printf ("HW-Version: ");
355 switch (immr->im_ioport.iop_pddat & rd_msk) {
356 case HW_ID_0:
357 printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
358 break;
359 case HW_ID_1:
360 printf ("V0.9 / W50037-Q1-D6-1\n");
361 break;
362 case HW_ID_2:
363 printf ("NOT USED - assuming ID#2\n");
364 break;
365 case HW_ID_3:
366 printf ("NOT USED - assuming ID#3\n");
367 break;
368 case HW_ID_4:
369 printf ("NOT USED - assuming ID#4\n");
370 break;
371 case HW_ID_5:
372 printf ("NOT USED - assuming ID#5\n");
373 break;
374 case HW_ID_6:
375 printf ("NOT USED - assuming ID#6\n");
376 break;
377 case HW_ID_7:
378 printf ("NOT USED - assuming ID#7\n");
379 break;
380 default:
381 printf ("###Error###\n");
382 break;
383 }
384}
385
386/* ------------------------------------------------------------------------- */