Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 6489dac3ab1e6d50c6847f017e839fcc1deb0c40 / . / arch / arm / dts / imx8mn.dtsi
blob: f5eff35986af2375d0d85aec78726c0dd06c454d [file] [log] [blame]
Peng Fandadb0722019-09-16 03:09:52 +0000[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mn-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10
11#include "imx8mn-pinfunc.h"
12
13/ {
14 compatible = "fsl,imx8mn";
15 interrupt-parent = <&gic>;
16 #address-cells = <2>;
17 #size-cells = <2>;
18
19 aliases {
20 ethernet0 = &fec1;
21 gpio0 = &gpio1;
22 gpio1 = &gpio2;
23 gpio2 = &gpio3;
24 gpio3 = &gpio4;
25 gpio4 = &gpio5;
26 i2c0 = &i2c1;
27 i2c1 = &i2c2;
28 i2c2 = &i2c3;
29 i2c3 = &i2c4;
30 mmc0 = &usdhc1;
31 mmc1 = &usdhc2;
32 mmc2 = &usdhc3;
33 serial0 = &uart1;
34 serial1 = &uart2;
35 serial2 = &uart3;
36 serial3 = &uart4;
37 spi0 = &ecspi1;
38 spi1 = &ecspi2;
39 spi2 = &ecspi3;
40 };
41
42 cpus {
43 #address-cells = <1>;
44 #size-cells = <0>;
45
46 A53_0: cpu@0 {
47 device_type = "cpu";
48 compatible = "arm,cortex-a53";
49 reg = <0x0>;
50 clock-latency = <61036>;
51 clocks = <&clk IMX8MN_CLK_ARM>;
52 enable-method = "psci";
53 next-level-cache = <&A53_L2>;
54 };
55
56 A53_1: cpu@1 {
57 device_type = "cpu";
58 compatible = "arm,cortex-a53";
59 reg = <0x1>;
60 clock-latency = <61036>;
61 clocks = <&clk IMX8MN_CLK_ARM>;
62 enable-method = "psci";
63 next-level-cache = <&A53_L2>;
64 };
65
66 A53_2: cpu@2 {
67 device_type = "cpu";
68 compatible = "arm,cortex-a53";
69 reg = <0x2>;
70 clock-latency = <61036>;
71 clocks = <&clk IMX8MN_CLK_ARM>;
72 enable-method = "psci";
73 next-level-cache = <&A53_L2>;
74 };
75
76 A53_3: cpu@3 {
77 device_type = "cpu";
78 compatible = "arm,cortex-a53";
79 reg = <0x3>;
80 clock-latency = <61036>;
81 clocks = <&clk IMX8MN_CLK_ARM>;
82 enable-method = "psci";
83 next-level-cache = <&A53_L2>;
84 };
85
86 A53_L2: l2-cache0 {
87 compatible = "cache";
88 };
89 };
90
91 memory@40000000 {
92 device_type = "memory";
93 reg = <0x0 0x40000000 0 0x80000000>;
94 };
95
96 osc_32k: clock-osc-32k {
97 compatible = "fixed-clock";
98 #clock-cells = <0>;
99 clock-frequency = <32768>;
100 clock-output-names = "osc_32k";
101 };
102
103 osc_24m: clock-osc-24m {
104 compatible = "fixed-clock";
105 #clock-cells = <0>;
106 clock-frequency = <24000000>;
107 clock-output-names = "osc_24m";
108 };
109
110 clk_ext1: clock-ext1 {
111 compatible = "fixed-clock";
112 #clock-cells = <0>;
113 clock-frequency = <133000000>;
114 clock-output-names = "clk_ext1";
115 };
116
117 clk_ext2: clock-ext2 {
118 compatible = "fixed-clock";
119 #clock-cells = <0>;
120 clock-frequency = <133000000>;
121 clock-output-names = "clk_ext2";
122 };
123
124 clk_ext3: clock-ext3 {
125 compatible = "fixed-clock";
126 #clock-cells = <0>;
127 clock-frequency = <133000000>;
128 clock-output-names = "clk_ext3";
129 };
130
131 clk_ext4: clock-ext4 {
132 compatible = "fixed-clock";
133 #clock-cells = <0>;
134 clock-frequency= <133000000>;
135 clock-output-names = "clk_ext4";
136 };
137
138 psci {
139 compatible = "arm,psci-1.0";
140 method = "smc";
141 };
142
143 timer {
144 compatible = "arm,armv8-timer";
145 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
146 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
147 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
148 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
149 clock-frequency = <8000000>;
150 arm,no-tick-in-suspend;
151 };
152
153 soc@0 {
154 compatible = "simple-bus";
155 #address-cells = <1>;
156 #size-cells = <1>;
157 ranges = <0x0 0x0 0x0 0x3e000000>;
158
159 aips1: bus@30000000 {
160 compatible = "fsl,aips-bus", "simple-bus";
161 reg = <0x30000000 0x400000>;
162 #address-cells = <1>;
163 #size-cells = <1>;
164 ranges;
165
166 gpio1: gpio@30200000 {
167 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
168 reg = <0x30200000 0x10000>;
169 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
170 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
171 clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
172 gpio-controller;
173 #gpio-cells = <2>;
174 interrupt-controller;
175 #interrupt-cells = <2>;
176 };
177
178 gpio2: gpio@30210000 {
179 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
180 reg = <0x30210000 0x10000>;
181 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
182 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
183 clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
184 gpio-controller;
185 #gpio-cells = <2>;
186 interrupt-controller;
187 #interrupt-cells = <2>;
188 };
189
190 gpio3: gpio@30220000 {
191 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
192 reg = <0x30220000 0x10000>;
193 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
194 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
195 clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
196 gpio-controller;
197 #gpio-cells = <2>;
198 interrupt-controller;
199 #interrupt-cells = <2>;
200 };
201
202 gpio4: gpio@30230000 {
203 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
204 reg = <0x30230000 0x10000>;
205 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
206 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
207 clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
208 gpio-controller;
209 #gpio-cells = <2>;
210 interrupt-controller;
211 #interrupt-cells = <2>;
212 };
213
214 gpio5: gpio@30240000 {
215 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
216 reg = <0x30240000 0x10000>;
217 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
218 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
219 clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
220 gpio-controller;
221 #gpio-cells = <2>;
222 interrupt-controller;
223 #interrupt-cells = <2>;
224 };
225
226 wdog1: watchdog@30280000 {
227 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
228 reg = <0x30280000 0x10000>;
229 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
230 clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
231 status = "disabled";
232 };
233
234 wdog2: watchdog@30290000 {
235 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
236 reg = <0x30290000 0x10000>;
237 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
238 clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
239 status = "disabled";
240 };
241
242 wdog3: watchdog@302a0000 {
243 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
244 reg = <0x302a0000 0x10000>;
245 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
246 clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
247 status = "disabled";
248 };
249
250 sdma3: dma-controller@302b0000 {
251 compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
252 reg = <0x302b0000 0x10000>;
253 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
254 clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
255 <&clk IMX8MN_CLK_SDMA3_ROOT>;
256 clock-names = "ipg", "ahb";
257 #dma-cells = <3>;
258 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
259 };
260
261 sdma2: dma-controller@302c0000 {
262 compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
263 reg = <0x302c0000 0x10000>;
264 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
265 clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
266 <&clk IMX8MN_CLK_SDMA2_ROOT>;
267 clock-names = "ipg", "ahb";
268 #dma-cells = <3>;
269 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
270 };
271
272 iomuxc: pinctrl@30330000 {
273 compatible = "fsl,imx8mn-iomuxc";
274 reg = <0x30330000 0x10000>;
275 };
276
277 gpr: iomuxc-gpr@30340000 {
278 compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
279 reg = <0x30340000 0x10000>;
280 };
281
282 ocotp: ocotp-ctrl@30350000 {
283 compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon";
284 reg = <0x30350000 0x10000>;
285 clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
286 };
287
288 anatop: anatop@30360000 {
289 compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
290 "syscon", "simple-bus";
291 reg = <0x30360000 0x10000>;
292 };
293
294 snvs: snvs@30370000 {
295 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
296 reg = <0x30370000 0x10000>;
297
298 snvs_rtc: snvs-rtc-lp {
299 compatible = "fsl,sec-v4.0-mon-rtc-lp";
300 regmap = <&snvs>;
301 offset = <0x34>;
302 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
303 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
304 clock-names = "snvs-rtc";
305 };
306
307 snvs_pwrkey: snvs-powerkey {
308 compatible = "fsl,sec-v4.0-pwrkey";
309 regmap = <&snvs>;
310 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
311 linux,keycode = <KEY_POWER>;
312 wakeup-source;
313 status = "disabled";
314 };
315 };
316
317 clk: clock-controller@30380000 {
318 compatible = "fsl,imx8mn-ccm";
319 reg = <0x30380000 0x10000>;
320 #clock-cells = <1>;
321 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
322 <&clk_ext3>, <&clk_ext4>;
323 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
324 "clk_ext3", "clk_ext4";
325 };
326
327 src: reset-controller@30390000 {
328 compatible = "fsl,imx8mn-src", "syscon";
329 reg = <0x30390000 0x10000>;
330 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
331 #reset-cells = <1>;
332 };
333 };
334
335 aips2: bus@30400000 {
336 compatible = "fsl,aips-bus", "simple-bus";
337 reg = <0x30400000 0x400000>;
338 #address-cells = <1>;
339 #size-cells = <1>;
340 ranges;
341
342 pwm1: pwm@30660000 {
343 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
344 reg = <0x30660000 0x10000>;
345 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
346 clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
347 <&clk IMX8MN_CLK_PWM1_ROOT>;
348 clock-names = "ipg", "per";
349 #pwm-cells = <2>;
350 status = "disabled";
351 };
352
353 pwm2: pwm@30670000 {
354 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
355 reg = <0x30670000 0x10000>;
356 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
357 clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
358 <&clk IMX8MN_CLK_PWM2_ROOT>;
359 clock-names = "ipg", "per";
360 #pwm-cells = <2>;
361 status = "disabled";
362 };
363
364 pwm3: pwm@30680000 {
365 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
366 reg = <0x30680000 0x10000>;
367 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
368 clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
369 <&clk IMX8MN_CLK_PWM3_ROOT>;
370 clock-names = "ipg", "per";
371 #pwm-cells = <2>;
372 status = "disabled";
373 };
374
375 pwm4: pwm@30690000 {
376 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
377 reg = <0x30690000 0x10000>;
378 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
379 clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
380 <&clk IMX8MN_CLK_PWM4_ROOT>;
381 clock-names = "ipg", "per";
382 #pwm-cells = <2>;
383 status = "disabled";
384 };
385 };
386
387 aips3: bus@30800000 {
388 compatible = "fsl,aips-bus", "simple-bus";
389 reg = <0x30800000 0x400000>;
390 #address-cells = <1>;
391 #size-cells = <1>;
392 ranges;
393
394 ecspi1: spi@30820000 {
395 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
396 #address-cells = <1>;
397 #size-cells = <0>;
398 reg = <0x30820000 0x10000>;
399 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
400 clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
401 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
402 clock-names = "ipg", "per";
403 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
404 dma-names = "rx", "tx";
405 status = "disabled";
406 };
407
408 ecspi2: spi@30830000 {
409 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
410 #address-cells = <1>;
411 #size-cells = <0>;
412 reg = <0x30830000 0x10000>;
413 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
414 clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
415 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
416 clock-names = "ipg", "per";
417 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
418 dma-names = "rx", "tx";
419 status = "disabled";
420 };
421
422 ecspi3: spi@30840000 {
423 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
424 #address-cells = <1>;
425 #size-cells = <0>;
426 reg = <0x30840000 0x10000>;
427 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
428 clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
429 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
430 clock-names = "ipg", "per";
431 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
432 dma-names = "rx", "tx";
433 status = "disabled";
434 };
435
436 uart1: serial@30860000 {
437 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
438 reg = <0x30860000 0x10000>;
439 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
440 clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
441 <&clk IMX8MN_CLK_UART1_ROOT>;
442 clock-names = "ipg", "per";
443 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
444 dma-names = "rx", "tx";
445 status = "disabled";
446 };
447
448 uart3: serial@30880000 {
449 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
450 reg = <0x30880000 0x10000>;
451 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
452 clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
453 <&clk IMX8MN_CLK_UART3_ROOT>;
454 clock-names = "ipg", "per";
455 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
456 dma-names = "rx", "tx";
457 status = "disabled";
458 };
459
460 uart2: serial@30890000 {
461 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
462 reg = <0x30890000 0x10000>;
463 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
464 clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
465 <&clk IMX8MN_CLK_UART2_ROOT>;
466 clock-names = "ipg", "per";
467 status = "disabled";
468 };
469
470 i2c1: i2c@30a20000 {
471 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
472 #address-cells = <1>;
473 #size-cells = <0>;
474 reg = <0x30a20000 0x10000>;
475 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
476 clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
477 status = "disabled";
478 };
479
480 i2c2: i2c@30a30000 {
481 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
482 #address-cells = <1>;
483 #size-cells = <0>;
484 reg = <0x30a30000 0x10000>;
485 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
486 clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
487 status = "disabled";
488 };
489
490 i2c3: i2c@30a40000 {
491 #address-cells = <1>;
492 #size-cells = <0>;
493 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
494 reg = <0x30a40000 0x10000>;
495 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
496 clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
497 status = "disabled";
498 };
499
500 i2c4: i2c@30a50000 {
501 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
502 #address-cells = <1>;
503 #size-cells = <0>;
504 reg = <0x30a50000 0x10000>;
505 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
506 clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
507 status = "disabled";
508 };
509
510 uart4: serial@30a60000 {
511 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
512 reg = <0x30a60000 0x10000>;
513 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
514 clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
515 <&clk IMX8MN_CLK_UART4_ROOT>;
516 clock-names = "ipg", "per";
517 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
518 dma-names = "rx", "tx";
519 status = "disabled";
520 };
521
522 usdhc1: mmc@30b40000 {
523 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
524 reg = <0x30b40000 0x10000>;
525 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
526 clocks = <&clk IMX8MN_CLK_DUMMY>,
527 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
528 <&clk IMX8MN_CLK_USDHC1_ROOT>;
529 clock-names = "ipg", "ahb", "per";
530 assigned-clocks = <&clk IMX8MN_CLK_USDHC1>;
531 assigned-clock-rates = <400000000>;
532 fsl,tuning-start-tap = <20>;
533 fsl,tuning-step= <2>;
534 bus-width = <4>;
535 status = "disabled";
536 };
537
538 usdhc2: mmc@30b50000 {
539 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
540 reg = <0x30b50000 0x10000>;
541 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
542 clocks = <&clk IMX8MN_CLK_DUMMY>,
543 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
544 <&clk IMX8MN_CLK_USDHC2_ROOT>;
545 clock-names = "ipg", "ahb", "per";
546 fsl,tuning-start-tap = <20>;
547 fsl,tuning-step= <2>;
548 bus-width = <4>;
549 status = "disabled";
550 };
551
552 usdhc3: mmc@30b60000 {
553 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
554 reg = <0x30b60000 0x10000>;
555 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
556 clocks = <&clk IMX8MN_CLK_DUMMY>,
557 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
558 <&clk IMX8MN_CLK_USDHC3_ROOT>;
559 clock-names = "ipg", "ahb", "per";
560 assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
561 assigned-clock-rates = <400000000>;
562 fsl,tuning-start-tap = <20>;
563 fsl,tuning-step= <2>;
564 bus-width = <4>;
565 status = "disabled";
566 };
567
568 sdma1: dma-controller@30bd0000 {
569 compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
570 reg = <0x30bd0000 0x10000>;
571 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
572 clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
573 <&clk IMX8MN_CLK_SDMA1_ROOT>;
574 clock-names = "ipg", "ahb";
575 #dma-cells = <3>;
576 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
577 };
578
579 fec1: ethernet@30be0000 {
580 compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec";
581 reg = <0x30be0000 0x10000>;
582 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
583 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
584 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
585 clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
586 <&clk IMX8MN_CLK_ENET1_ROOT>,
587 <&clk IMX8MN_CLK_ENET_TIMER>,
588 <&clk IMX8MN_CLK_ENET_REF>,
589 <&clk IMX8MN_CLK_ENET_PHY_REF>;
590 clock-names = "ipg", "ahb", "ptp",
591 "enet_clk_ref", "enet_out";
592 assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
593 <&clk IMX8MN_CLK_ENET_TIMER>,
594 <&clk IMX8MN_CLK_ENET_REF>,
595 <&clk IMX8MN_CLK_ENET_TIMER>;
596 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
597 <&clk IMX8MN_SYS_PLL2_100M>,
598 <&clk IMX8MN_SYS_PLL2_125M>;
599 assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
600 fsl,num-tx-queues = <3>;
601 fsl,num-rx-queues = <3>;
602 status = "disabled";
603 };
604
605 };
606
607 aips4: bus@32c00000 {
608 compatible = "fsl,aips-bus", "simple-bus";
609 reg = <0x32c00000 0x400000>;
610 #address-cells = <1>;
611 #size-cells = <1>;
612 ranges;
613
614 usbotg1: usb@32e40000 {
615 compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
616 reg = <0x32e40000 0x200>;
617 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
618 clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
619 clock-names = "usb1_ctrl_root_clk";
620 assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
621 <&clk IMX8MN_CLK_USB_CORE_REF>;
622 assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
623 <&clk IMX8MN_SYS_PLL1_100M>;
624 fsl,usbphy = <&usbphynop1>;
625 fsl,usbmisc = <&usbmisc1 0>;
626 status = "disabled";
627 };
628
629 usbmisc1: usbmisc@32e40200 {
630 compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
631 #index-cells = <1>;
632 reg = <0x32e40200 0x200>;
633 };
634
635 usbotg2: usb@32e50000 {
636 compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
637 reg = <0x32e50000 0x200>;
638 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
639 clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
640 clock-names = "usb1_ctrl_root_clk";
641 assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
642 <&clk IMX8MN_CLK_USB_CORE_REF>;
643 assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
644 <&clk IMX8MN_SYS_PLL1_100M>;
645 fsl,usbphy = <&usbphynop2>;
646 fsl,usbmisc = <&usbmisc2 0>;
647 status = "disabled";
648 };
649
650 usbmisc2: usbmisc@32e50200 {
651 compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
652 #index-cells = <1>;
653 reg = <0x32e50200 0x200>;
654 };
655
656 };
657
658 dma_apbh: dma-controller@33000000 {
659 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
660 reg = <0x33000000 0x2000>;
661 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
662 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
663 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
664 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
665 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
666 #dma-cells = <1>;
667 dma-channels = <4>;
668 clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
669 };
670
671 gpmi: nand-controller@33002000 {
672 compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
673 #address-cells = <1>;
674 #size-cells = <1>;
675 reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
676 reg-names = "gpmi-nand", "bch";
677 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
678 interrupt-names = "bch";
679 clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
680 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
681 clock-names = "gpmi_io", "gpmi_bch_apb";
682 dmas = <&dma_apbh 0>;
683 dma-names = "rx-tx";
684 status = "disabled";
685 };
686
687 gic: interrupt-controller@38800000 {
688 compatible = "arm,gic-v3";
689 reg = <0x38800000 0x10000>,
690 <0x38880000 0xc0000>;
691 #interrupt-cells = <3>;
692 interrupt-controller;
693 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
694 };
695 };
696
697 usbphynop1: usbphynop1 {
698 compatible = "usb-nop-xceiv";
699 clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
700 assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
701 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
702 clock-names = "main_clk";
703 };
704
705 usbphynop2: usbphynop2 {
706 compatible = "usb-nop-xceiv";
707 clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
708 assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
709 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
710 clock-names = "main_clk";
711 };
712};