blob: ef249ff5194bd11d4c20e2c0e17cc4213433a3ac [file] [log] [blame]
Peng Fan9b15ce92019-08-27 06:26:08 +00001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6/dts-v1/;
7
Peng Fan387c4492019-10-16 10:24:30 +00008#include <dt-bindings/usb/pd.h>
Peng Fan9b15ce92019-08-27 06:26:08 +00009#include "imx8mm.dtsi"
10
11/ {
12 model = "FSL i.MX8MM EVK board";
13 compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
14
15 chosen {
16 stdout-path = &uart2;
17 };
18
19 leds {
20 compatible = "gpio-leds";
21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_gpio_led>;
23
24 status {
25 label = "status";
26 gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
27 default-state = "on";
28 };
29 };
30
31 reg_usdhc2_vmmc: regulator-usdhc2 {
32 compatible = "regulator-fixed";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
35 regulator-name = "VSD_3V3";
36 regulator-min-microvolt = <3300000>;
37 regulator-max-microvolt = <3300000>;
38 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
39 enable-active-high;
40 };
Peng Fan387c4492019-10-16 10:24:30 +000041
42 wm8524: audio-codec {
43 #sound-dai-cells = <0>;
44 compatible = "wlf,wm8524";
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_gpio_wlf>;
47 wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
48 };
49
50 sound-wm8524 {
51 compatible = "simple-audio-card";
52 simple-audio-card,name = "wm8524-audio";
53 simple-audio-card,format = "i2s";
54 simple-audio-card,frame-master = <&cpudai>;
55 simple-audio-card,bitclock-master = <&cpudai>;
56 simple-audio-card,widgets =
57 "Line", "Left Line Out Jack",
58 "Line", "Right Line Out Jack";
59 simple-audio-card,routing =
60 "Left Line Out Jack", "LINEVOUTL",
61 "Right Line Out Jack", "LINEVOUTR";
62
63 cpudai: simple-audio-card,cpu {
64 sound-dai = <&sai3>;
65 };
66
67 simple-audio-card,codec {
68 sound-dai = <&wm8524>;
69 clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
70 };
71 };
72};
73
74&A53_0 {
75 cpu-supply = <&buck2_reg>;
Peng Fan9b15ce92019-08-27 06:26:08 +000076};
77
78&fec1 {
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_fec1>;
81 phy-mode = "rgmii-id";
82 phy-handle = <&ethphy0>;
83 fsl,magic-packet;
84 status = "okay";
85
86 mdio {
87 #address-cells = <1>;
88 #size-cells = <0>;
89
90 ethphy0: ethernet-phy@0 {
91 compatible = "ethernet-phy-ieee802.3-c22";
92 reg = <0>;
Peng Fan9b15ce92019-08-27 06:26:08 +000093 };
94 };
95};
96
Peng Fan387c4492019-10-16 10:24:30 +000097&i2c1 {
98 clock-frequency = <400000>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_i2c1>;
101 status = "okay";
102
103 pmic@4b {
104 compatible = "rohm,bd71847";
105 reg = <0x4b>;
106 pinctrl-0 = <&pinctrl_pmic>;
107 interrupt-parent = <&gpio1>;
108 interrupts = <3 GPIO_ACTIVE_LOW>;
109 rohm,reset-snvs-powered;
110
111 regulators {
112 buck1_reg: BUCK1 {
113 regulator-name = "BUCK1";
114 regulator-min-microvolt = <700000>;
115 regulator-max-microvolt = <1300000>;
116 regulator-boot-on;
117 regulator-always-on;
118 regulator-ramp-delay = <1250>;
119 };
120
121 buck2_reg: BUCK2 {
122 regulator-name = "BUCK2";
123 regulator-min-microvolt = <700000>;
124 regulator-max-microvolt = <1300000>;
125 regulator-boot-on;
126 regulator-always-on;
127 regulator-ramp-delay = <1250>;
128 rohm,dvs-run-voltage = <1000000>;
129 rohm,dvs-idle-voltage = <900000>;
130 };
131
132 buck3_reg: BUCK3 {
133 // BUCK5 in datasheet
134 regulator-name = "BUCK3";
135 regulator-min-microvolt = <700000>;
136 regulator-max-microvolt = <1350000>;
137 regulator-boot-on;
138 regulator-always-on;
139 };
140
141 buck4_reg: BUCK4 {
142 // BUCK6 in datasheet
143 regulator-name = "BUCK4";
144 regulator-min-microvolt = <3000000>;
145 regulator-max-microvolt = <3300000>;
146 regulator-boot-on;
147 regulator-always-on;
148 };
149
150 buck5_reg: BUCK5 {
151 // BUCK7 in datasheet
152 regulator-name = "BUCK5";
153 regulator-min-microvolt = <1605000>;
154 regulator-max-microvolt = <1995000>;
155 regulator-boot-on;
156 regulator-always-on;
157 };
158
159 buck6_reg: BUCK6 {
160 // BUCK8 in datasheet
161 regulator-name = "BUCK6";
162 regulator-min-microvolt = <800000>;
163 regulator-max-microvolt = <1400000>;
164 regulator-boot-on;
165 regulator-always-on;
166 };
167
168 ldo1_reg: LDO1 {
169 regulator-name = "LDO1";
170 regulator-min-microvolt = <3000000>;
171 regulator-max-microvolt = <3300000>;
172 regulator-boot-on;
173 regulator-always-on;
174 };
175
176 ldo2_reg: LDO2 {
177 regulator-name = "LDO2";
178 regulator-min-microvolt = <900000>;
179 regulator-max-microvolt = <900000>;
180 regulator-boot-on;
181 regulator-always-on;
182 };
183
184 ldo3_reg: LDO3 {
185 regulator-name = "LDO3";
186 regulator-min-microvolt = <1800000>;
187 regulator-max-microvolt = <3300000>;
188 regulator-boot-on;
189 regulator-always-on;
190 };
191
192 ldo4_reg: LDO4 {
193 regulator-name = "LDO4";
194 regulator-min-microvolt = <900000>;
195 regulator-max-microvolt = <1800000>;
196 regulator-boot-on;
197 regulator-always-on;
198 };
199
200 ldo6_reg: LDO6 {
201 regulator-name = "LDO6";
202 regulator-min-microvolt = <900000>;
203 regulator-max-microvolt = <1800000>;
204 regulator-boot-on;
205 regulator-always-on;
206 };
207 };
208 };
209};
210
211&i2c2 {
212 clock-frequency = <400000>;
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_i2c2>;
215 status = "okay";
216
217 ptn5110: tcpc@50 {
218 compatible = "nxp,ptn5110";
219 pinctrl-names = "default";
220 pinctrl-0 = <&pinctrl_typec1>;
221 reg = <0x50>;
222 interrupt-parent = <&gpio2>;
223 interrupts = <11 8>;
224 status = "okay";
225
226 port {
227 typec1_dr_sw: endpoint {
228 remote-endpoint = <&usb1_drd_sw>;
229 };
230 };
231
232 typec1_con: connector {
233 compatible = "usb-c-connector";
234 label = "USB-C";
235 power-role = "dual";
236 data-role = "dual";
237 try-power-role = "sink";
238 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
239 sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
240 PDO_VAR(5000, 20000, 3000)>;
241 op-sink-microwatt = <15000000>;
242 self-powered;
243 };
244 };
245};
246
247&i2c3 {
248 clock-frequency = <400000>;
249 pinctrl-names = "default";
250 pinctrl-0 = <&pinctrl_i2c3>;
251 status = "okay";
252
253 pca6416: gpio@20 {
254 compatible = "ti,tca6416";
255 reg = <0x20>;
256 gpio-controller;
257 #gpio-cells = <2>;
258 };
259};
260
261&sai3 {
262 pinctrl-names = "default";
263 pinctrl-0 = <&pinctrl_sai3>;
264 assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
265 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
266 assigned-clock-rates = <24576000>;
267 status = "okay";
268};
269
270&snvs_pwrkey {
271 status = "okay";
272};
273
Peng Fan9b15ce92019-08-27 06:26:08 +0000274&uart2 { /* console */
275 pinctrl-names = "default";
276 pinctrl-0 = <&pinctrl_uart2>;
277 status = "okay";
278};
279
Peng Fan387c4492019-10-16 10:24:30 +0000280&usbotg1 {
281 dr_mode = "otg";
282 hnp-disable;
283 srp-disable;
284 adp-disable;
285 usb-role-switch;
286 status = "okay";
287
288 port {
289 usb1_drd_sw: endpoint {
290 remote-endpoint = <&typec1_dr_sw>;
291 };
292 };
293};
294
Peng Fan9b15ce92019-08-27 06:26:08 +0000295&usdhc2 {
296 pinctrl-names = "default", "state_100mhz", "state_200mhz";
297 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
298 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
299 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
300 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
301 bus-width = <4>;
302 vmmc-supply = <&reg_usdhc2_vmmc>;
303 status = "okay";
304};
305
306&usdhc3 {
307 pinctrl-names = "default", "state_100mhz", "state_200mhz";
308 pinctrl-0 = <&pinctrl_usdhc3>;
309 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
310 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
311 bus-width = <8>;
312 non-removable;
313 status = "okay";
314};
315
316&wdog1 {
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_wdog>;
319 fsl,ext-reset-output;
320 status = "okay";
321};
322
323&iomuxc {
324 pinctrl-names = "default";
325
326 pinctrl_fec1: fec1grp {
327 fsl,pins = <
328 MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
329 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
330 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
331 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
332 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
333 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
334 MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
335 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
336 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
337 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
338 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
339 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
340 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
341 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
342 MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
343 >;
344 };
345
346 pinctrl_gpio_led: gpioledgrp {
347 fsl,pins = <
348 MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
349 >;
350 };
351
Peng Fan387c4492019-10-16 10:24:30 +0000352 pinctrl_gpio_wlf: gpiowlfgrp {
353 fsl,pins = <
354 MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
355 >;
356 };
357
358 pinctrl_i2c1: i2c1grp {
359 fsl,pins = <
360 MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
361 MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
362 >;
363 };
364
365 pinctrl_i2c2: i2c2grp {
366 fsl,pins = <
367 MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
368 MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
369 >;
370 };
371
372 pinctrl_i2c3: i2c3grp {
373 fsl,pins = <
374 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
375 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
376 >;
377 };
378
379 pinctrl_pmic: pmicirq {
380 fsl,pins = <
381 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
382 >;
383 };
384
Peng Fan9b15ce92019-08-27 06:26:08 +0000385 pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
386 fsl,pins = <
387 MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
388 >;
389 };
390
Peng Fan387c4492019-10-16 10:24:30 +0000391 pinctrl_sai3: sai3grp {
392 fsl,pins = <
393 MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
394 MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
395 MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
396 MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
397 >;
398 };
399
400 pinctrl_typec1: typec1grp {
401 fsl,pins = <
402 MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
403 >;
404 };
405
Peng Fan9b15ce92019-08-27 06:26:08 +0000406 pinctrl_uart2: uart2grp {
407 fsl,pins = <
408 MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
409 MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
410 >;
411 };
412
413 pinctrl_usdhc2_gpio: usdhc2grpgpio {
414 fsl,pins = <
415 MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
416 >;
417 };
418
419 pinctrl_usdhc2: usdhc2grp {
420 fsl,pins = <
421 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
422 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
423 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
424 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
425 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
426 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
427 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
428 >;
429 };
430
431 pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
432 fsl,pins = <
433 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
434 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
435 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
436 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
437 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
438 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
439 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
440 >;
441 };
442
443 pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
444 fsl,pins = <
445 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
446 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
447 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
448 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
449 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
450 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
451 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
452 >;
453 };
454
455 pinctrl_usdhc3: usdhc3grp {
456 fsl,pins = <
457 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
458 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
459 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
460 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
461 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
462 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
463 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
464 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
465 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
466 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
Peng Fand239d9d2019-09-16 03:09:55 +0000467 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
Peng Fan9b15ce92019-08-27 06:26:08 +0000468 >;
469 };
470
471 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
472 fsl,pins = <
473 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
474 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
475 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
476 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
477 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
478 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
479 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
480 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
481 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
482 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
Peng Fand239d9d2019-09-16 03:09:55 +0000483 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
Peng Fan9b15ce92019-08-27 06:26:08 +0000484 >;
485 };
486
487 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
488 fsl,pins = <
489 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
490 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
491 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
492 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
493 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
494 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
495 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
496 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
497 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
498 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
Peng Fand239d9d2019-09-16 03:09:55 +0000499 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
Peng Fan9b15ce92019-08-27 06:26:08 +0000500 >;
501 };
502
503 pinctrl_wdog: wdoggrp {
504 fsl,pins = <
505 MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
506 >;
507 };
508};