| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "qcom-msm8226.dtsi" |
| 9 | #include "qcom-pm8226.dtsi" |
| 10 | |
| 11 | /delete-node/ &adsp_region; |
| 12 | |
| 13 | / { |
| 14 | model = "LG G Watch R"; |
| 15 | compatible = "lg,lenok", "qcom,apq8026"; |
| 16 | chassis-type = "watch"; |
| 17 | qcom,board-id = <132 0x0a>; |
| 18 | qcom,msm-id = <199 0x20000>; |
| 19 | |
| 20 | aliases { |
| 21 | serial0 = &blsp1_uart3; |
| 22 | serial1 = &blsp1_uart4; |
| 23 | }; |
| 24 | |
| 25 | chosen { |
| 26 | stdout-path = "serial0:115200n8"; |
| 27 | }; |
| 28 | |
| 29 | reserved-memory { |
| 30 | sbl_region: sbl@2f00000 { |
| 31 | reg = <0x02f00000 0x100000>; |
| 32 | no-map; |
| 33 | }; |
| 34 | |
| 35 | external_image_region: external-image@3100000 { |
| 36 | reg = <0x03100000 0x200000>; |
| 37 | no-map; |
| 38 | }; |
| 39 | |
| 40 | adsp_region: adsp@3300000 { |
| 41 | reg = <0x03300000 0x1400000>; |
| 42 | no-map; |
| 43 | }; |
| 44 | }; |
| 45 | |
| 46 | vreg_wlan: wlan-regulator { |
| 47 | compatible = "regulator-fixed"; |
| 48 | |
| 49 | regulator-name = "wl-reg"; |
| 50 | regulator-min-microvolt = <2950000>; |
| 51 | regulator-max-microvolt = <2950000>; |
| 52 | |
| 53 | gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>; |
| 54 | enable-active-high; |
| 55 | |
| 56 | pinctrl-names = "default"; |
| 57 | pinctrl-0 = <&wlan_regulator_default_state>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | &adsp { |
| 62 | status = "okay"; |
| 63 | }; |
| 64 | |
| 65 | &blsp1_i2c1 { |
| 66 | status = "okay"; |
| 67 | |
| 68 | fuel-gauge@55 { |
| 69 | compatible = "ti,bq27421"; |
| 70 | reg = <0x55>; |
| 71 | }; |
| 72 | }; |
| 73 | |
| 74 | &blsp1_i2c5 { |
| 75 | status = "okay"; |
| 76 | clock-frequency = <384000>; |
| 77 | |
| 78 | touchscreen@20 { |
| 79 | compatible = "syna,rmi4-i2c"; |
| 80 | reg = <0x20>; |
| 81 | |
| 82 | interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; |
| 83 | vdd-supply = <&pm8226_l15>; |
| 84 | vio-supply = <&pm8226_l22>; |
| 85 | |
| 86 | pinctrl-names = "default"; |
| 87 | pinctrl-0 = <&touch_pins>; |
| 88 | |
| 89 | #address-cells = <1>; |
| 90 | #size-cells = <0>; |
| 91 | |
| 92 | rmi4-f01@1 { |
| 93 | reg = <0x1>; |
| 94 | syna,nosleep-mode = <1>; |
| 95 | }; |
| 96 | |
| 97 | rmi4-f12@12 { |
| 98 | reg = <0x12>; |
| 99 | syna,sensor-type = <1>; |
| 100 | }; |
| 101 | }; |
| 102 | }; |
| 103 | |
| 104 | &blsp1_uart3 { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | |
| 108 | &blsp1_uart4 { |
| 109 | status = "okay"; |
| 110 | |
| 111 | pinctrl-names = "default"; |
| 112 | pinctrl-0 = <&blsp1_uart4_default_state>; |
| 113 | |
| 114 | bluetooth { |
| 115 | compatible = "brcm,bcm43430a0-bt"; |
| 116 | |
| 117 | max-speed = <3000000>; |
| 118 | |
| 119 | pinctrl-names = "default"; |
| 120 | pinctrl-0 = <&bluetooth_default_state>; |
| 121 | |
| 122 | host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; |
| 123 | device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; |
| 124 | shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; |
| 125 | }; |
| 126 | }; |
| 127 | |
| 128 | &rpm_requests { |
| 129 | regulators { |
| 130 | compatible = "qcom,rpm-pm8226-regulators"; |
| 131 | |
| 132 | pm8226_s3: s3 { |
| 133 | regulator-min-microvolt = <1200000>; |
| 134 | regulator-max-microvolt = <1350000>; |
| 135 | }; |
| 136 | pm8226_s4: s4 { |
| 137 | regulator-min-microvolt = <1800000>; |
| 138 | regulator-max-microvolt = <2200000>; |
| 139 | }; |
| 140 | pm8226_s5: s5 { |
| 141 | regulator-min-microvolt = <1150000>; |
| 142 | regulator-max-microvolt = <1150000>; |
| 143 | }; |
| 144 | |
| 145 | pm8226_l1: l1 { |
| 146 | regulator-min-microvolt = <1225000>; |
| 147 | regulator-max-microvolt = <1225000>; |
| 148 | }; |
| 149 | pm8226_l2: l2 { |
| 150 | regulator-min-microvolt = <1200000>; |
| 151 | regulator-max-microvolt = <1200000>; |
| 152 | }; |
| 153 | pm8226_l3: l3 { |
| 154 | regulator-min-microvolt = <750000>; |
| 155 | regulator-max-microvolt = <1337500>; |
| 156 | }; |
| 157 | pm8226_l4: l4 { |
| 158 | regulator-min-microvolt = <1200000>; |
| 159 | regulator-max-microvolt = <1200000>; |
| 160 | }; |
| 161 | pm8226_l5: l5 { |
| 162 | regulator-min-microvolt = <1200000>; |
| 163 | regulator-max-microvolt = <1200000>; |
| 164 | }; |
| 165 | pm8226_l6: l6 { |
| 166 | regulator-min-microvolt = <1800000>; |
| 167 | regulator-max-microvolt = <1800000>; |
| 168 | }; |
| 169 | pm8226_l7: l7 { |
| 170 | regulator-min-microvolt = <1850000>; |
| 171 | regulator-max-microvolt = <1850000>; |
| 172 | }; |
| 173 | pm8226_l8: l8 { |
| 174 | regulator-min-microvolt = <1800000>; |
| 175 | regulator-max-microvolt = <1800000>; |
| 176 | }; |
| 177 | pm8226_l9: l9 { |
| 178 | regulator-min-microvolt = <2050000>; |
| 179 | regulator-max-microvolt = <2050000>; |
| 180 | }; |
| 181 | pm8226_l10: l10 { |
| 182 | regulator-min-microvolt = <1800000>; |
| 183 | regulator-max-microvolt = <1800000>; |
| 184 | }; |
| 185 | pm8226_l12: l12 { |
| 186 | regulator-min-microvolt = <1800000>; |
| 187 | regulator-max-microvolt = <1800000>; |
| 188 | }; |
| 189 | pm8226_l14: l14 { |
| 190 | regulator-min-microvolt = <2750000>; |
| 191 | regulator-max-microvolt = <2750000>; |
| 192 | }; |
| 193 | pm8226_l15: l15 { |
| 194 | regulator-min-microvolt = <3300000>; |
| 195 | regulator-max-microvolt = <3300000>; |
| 196 | }; |
| 197 | pm8226_l16: l16 { |
| 198 | regulator-min-microvolt = <3000000>; |
| 199 | regulator-max-microvolt = <3350000>; |
| 200 | }; |
| 201 | pm8226_l17: l17 { |
| 202 | regulator-min-microvolt = <2950000>; |
| 203 | regulator-max-microvolt = <2950000>; |
| 204 | }; |
| 205 | pm8226_l18: l18 { |
| 206 | regulator-min-microvolt = <3000000>; |
| 207 | regulator-max-microvolt = <3300000>; |
| 208 | }; |
| 209 | pm8226_l19: l19 { |
| 210 | regulator-min-microvolt = <3000000>; |
| 211 | regulator-max-microvolt = <3000000>; |
| 212 | }; |
| 213 | pm8226_l20: l20 { |
| 214 | regulator-min-microvolt = <3075000>; |
| 215 | regulator-max-microvolt = <3075000>; |
| 216 | }; |
| 217 | pm8226_l21: l21 { |
| 218 | regulator-min-microvolt = <1800000>; |
| 219 | regulator-max-microvolt = <2950000>; |
| 220 | }; |
| 221 | pm8226_l22: l22 { |
| 222 | regulator-min-microvolt = <1800000>; |
| 223 | regulator-max-microvolt = <1800000>; |
| 224 | }; |
| 225 | pm8226_l23: l23 { |
| 226 | regulator-min-microvolt = <1800000>; |
| 227 | regulator-max-microvolt = <2950000>; |
| 228 | }; |
| 229 | pm8226_l24: l24 { |
| 230 | regulator-min-microvolt = <1300000>; |
| 231 | regulator-max-microvolt = <1350000>; |
| 232 | }; |
| 233 | pm8226_l25: l25 { |
| 234 | regulator-min-microvolt = <1775000>; |
| 235 | regulator-max-microvolt = <2125000>; |
| 236 | }; |
| 237 | pm8226_l26: l26 { |
| 238 | regulator-min-microvolt = <1225000>; |
| 239 | regulator-max-microvolt = <1225000>; |
| 240 | }; |
| 241 | pm8226_l27: l27 { |
| 242 | regulator-min-microvolt = <2050000>; |
| 243 | regulator-max-microvolt = <2050000>; |
| 244 | }; |
| 245 | pm8226_l28: l28 { |
| 246 | regulator-min-microvolt = <2700000>; |
| 247 | regulator-max-microvolt = <3000000>; |
| 248 | }; |
| 249 | |
| 250 | pm8226_lvs1: lvs1 {}; |
| 251 | }; |
| 252 | }; |
| 253 | |
| 254 | &sdhc_1 { |
| 255 | status = "okay"; |
| 256 | |
| 257 | vmmc-supply = <&pm8226_l17>; |
| 258 | vqmmc-supply = <&pm8226_l6>; |
| 259 | |
| 260 | bus-width = <8>; |
| 261 | non-removable; |
| 262 | }; |
| 263 | |
| 264 | &sdhc_3 { |
| 265 | status = "okay"; |
| 266 | |
| 267 | max-frequency = <100000000>; |
| 268 | non-removable; |
| 269 | |
| 270 | vmmc-supply = <&vreg_wlan>; |
| 271 | vqmmc-supply = <&pm8226_l6>; |
| 272 | |
| 273 | #address-cells = <1>; |
| 274 | #size-cells = <0>; |
| 275 | |
| 276 | wifi@1 { |
| 277 | compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; |
| 278 | reg = <1>; |
| 279 | |
| 280 | interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>; |
| 281 | interrupt-names = "host-wake"; |
| 282 | |
| 283 | pinctrl-names = "default"; |
| 284 | pinctrl-0 = <&wlan_hostwake_default_state>; |
| 285 | }; |
| 286 | }; |
| 287 | |
| 288 | &smbb { |
| 289 | qcom,fast-charge-safe-current = <450000>; |
| 290 | qcom,fast-charge-current-limit = <400000>; |
| 291 | qcom,fast-charge-safe-voltage = <4350000>; |
| 292 | qcom,fast-charge-high-threshold-voltage = <4350000>; |
| 293 | qcom,auto-recharge-threshold-voltage = <4240000>; |
| 294 | qcom,minimum-input-voltage = <4450000>; |
| 295 | }; |
| 296 | |
| 297 | &tlmm { |
| 298 | blsp1_uart4_default_state: blsp1-uart4-default-state { |
| 299 | pins = "gpio12", "gpio13", "gpio14", "gpio15"; |
| 300 | function = "blsp_uart4"; |
| 301 | drive-strength = <8>; |
| 302 | bias-disable; |
| 303 | }; |
| 304 | |
| 305 | bluetooth_default_state: bluetooth-default-state { |
| 306 | pins = "gpio47", "gpio48"; |
| 307 | function = "gpio"; |
| 308 | drive-strength = <2>; |
| 309 | bias-disable; |
| 310 | }; |
| 311 | |
| 312 | touch_pins: touch-state { |
| 313 | irq-pins { |
| 314 | pins = "gpio17"; |
| 315 | function = "gpio"; |
| 316 | |
| 317 | drive-strength = <8>; |
| 318 | bias-pull-down; |
| 319 | }; |
| 320 | |
| 321 | reset-pins { |
| 322 | pins = "gpio16"; |
| 323 | function = "gpio"; |
| 324 | |
| 325 | drive-strength = <8>; |
| 326 | bias-disable; |
| 327 | output-high; |
| 328 | }; |
| 329 | }; |
| 330 | |
| 331 | wlan_hostwake_default_state: wlan-hostwake-default-state { |
| 332 | pins = "gpio37"; |
| 333 | function = "gpio"; |
| 334 | drive-strength = <2>; |
| 335 | bias-disable; |
| 336 | }; |
| 337 | |
| 338 | wlan_regulator_default_state: wlan-regulator-default-state { |
| 339 | pins = "gpio46"; |
| 340 | function = "gpio"; |
| 341 | drive-strength = <2>; |
| 342 | bias-pull-up; |
| 343 | }; |
| 344 | }; |
| 345 | |
| 346 | &usb { |
| 347 | status = "okay"; |
| 348 | extcon = <&smbb>; |
| 349 | dr_mode = "peripheral"; |
| 350 | }; |
| 351 | |
| 352 | &usb_hs_phy { |
| 353 | extcon = <&smbb>; |
| 354 | v1p8-supply = <&pm8226_l10>; |
| 355 | v3p3-supply = <&pm8226_l20>; |
| 356 | }; |