blob: 3cc0c0f7a5561779aca203294bf893005b714279 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2001
3 * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*************************************************************************
25 * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
26 *
27 ************************************************************************/
28
29
30/*
31 * mpsc.h - header file for MPSC in uart mode (console driver)
32 */
33
34#ifndef __MPSC_H__
35#define __MPSC_H__
36
37/* include actual Galileo defines */
38#include "../include/mv_gen_reg.h"
39
40/* driver related defines */
41
42int mpsc_init(int baud);
43void mpsc_sdma_init(void);
44void mpsc_init2(void);
45int galbrg_set_baudrate(int channel, int rate);
46
47int mpsc_putchar_early(char ch);
48char mpsc_getchar_debug(void);
49int mpsc_test_char_debug(void);
50
51int mpsc_test_char_sdma(void);
52
53extern int (*mpsc_putchar)(char ch);
54extern char (*mpsc_getchar)(void);
55extern int (*mpsc_test_char)(void);
56
57#define CHANNEL CONFIG_MPSC_PORT
58
59#define TX_DESC 5
60#define RX_DESC 20
61
62#define DESC_FIRST 0x00010000
63#define DESC_LAST 0x00020000
64#define DESC_OWNER_BIT 0x80000000
65
66#define TX_DEMAND 0x00800000
67#define TX_STOP 0x00010000
68#define RX_ENABLE 0x00000080
69
70#define SDMA_RX_ABORT (1 << 15)
71#define SDMA_TX_ABORT (1 << 31)
72#define MPSC_TX_ABORT (1 << 7)
73#define MPSC_RX_ABORT (1 << 23)
74#define MPSC_ENTER_HUNT (1 << 31)
75
76/* MPSC defines */
77
78#define GALMPSC_CONNECT 0x1
79#define GALMPSC_DISCONNECT 0x0
80
81#define GALMPSC_UART 0x1
82
83#define GALMPSC_STOP_BITS_1 0x0
84#define GALMPSC_STOP_BITS_2 0x1
85#define GALMPSC_CHAR_LENGTH_8 0x3
86#define GALMPSC_CHAR_LENGTH_7 0x2
87
88#define GALMPSC_PARITY_ODD 0x0
89#define GALMPSC_PARITY_EVEN 0x2
90#define GALMPSC_PARITY_MARK 0x3
91#define GALMPSC_PARITY_SPACE 0x1
92#define GALMPSC_PARITY_NONE -1
93
94#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
95#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
96#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
97#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
98#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
99#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
100#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
101
102#define GALMPSC_REG_GAP 0x1000
103
104#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
105#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
106#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
107#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
108#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
109#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
110#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
111#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
112#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
113#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
114#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
115#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
116
117#define GALSDMA_COMMAND_FIRST (1 << 16)
118#define GALSDMA_COMMAND_LAST (1 << 17)
119#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
120#define GALSDMA_COMMAND_AUTO (1 << 30)
121#define GALSDMA_COMMAND_OWNER (1 << 31)
122
123#define GALSDMA_RX 0
124#define GALSDMA_TX 1
125
126/* CHANNEL2 should be CHANNEL1, according to documentation,
127 * but to work with the current GTREGS file...
128 */
129#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
130#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
131#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
132#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
133#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
134#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
135#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
136#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
137#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
138#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
139#define GALSDMA_REG_DIFF 0x2000
140
141/* WRONG in gt64260R.h */
142#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
143#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
144#define GALMPSC_0_INT_CAUSE 0xb804
145#define GALMPSC_0_INT_MASK 0xb884
146
147#define GALSDMA_MODE_UART 0
148#define GALSDMA_MODE_BISYNC 1
149#define GALSDMA_MODE_HDLC 2
150#define GALSDMA_MODE_TRANSPARENT 3
151
152#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
153#define GALBRG_REG_GAP 0x0008
154#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
155
156#endif /* __MPSC_H__ */