blob: 8c6b0b21b48642efd5fa639ebadafaa25b3b52a7 [file] [log] [blame]
wdenka1191902005-01-09 17:12:27 +00001/*
2 * IXP PCI Init
3 * (C) Copyright 2004 eslab.whut.edu.cn
4 * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25
26#include <common.h>
27
28#ifdef CONFIG_PCI
29
30#include <asm/processor.h>
31#include <asm/io.h>
32#include <pci.h>
33#include <asm/arch/ixp425.h>
34#include <asm/arch/ixp425pci.h>
35
36static void non_prefetch_read (unsigned int addr, unsigned int cmd,
37 unsigned int *data);
38static void non_prefetch_write (unsigned int addr, unsigned int cmd,
39 unsigned int data);
40static void configure_pins (void);
41static void sys_pci_gpio_clock_config (void);
42static void pci_bus_scan (void);
43static int pci_device_exists (unsigned int deviceNo);
44static void sys_pci_bar_info_get (unsigned int devnum, unsigned int bus,
45 unsigned int dev, unsigned int func);
46static void sys_pci_device_bars_write (void);
47static void calc_bars (PciBar * Bars[], unsigned int nBars,
48 unsigned int startAddr);
49
50#define PCI_MEMORY_BUS 0x00000000
51#define PCI_MEMORY_PHY 0x48000000
52#define PCI_MEMORY_SIZE 0x04000000
53
54#define PCI_MEM_BUS 0x40000000
55#define PCI_MEM_PHY 0x00000000
56#define PCI_MEM_SIZE 0x04000000
57
58#define PCI_IO_BUS 0x40000000
59#define PCI_IO_PHY 0x50000000
60#define PCI_IO_SIZE 0x10000000
61
62struct pci_controller hose;
63
64unsigned int nDevices;
65unsigned int nMBars;
66unsigned int nIOBars;
67PciBar *memBars[IXP425_PCI_MAX_BAR];
68PciBar *ioBars[IXP425_PCI_MAX_BAR];
69PciDevice devices[IXP425_PCI_MAX_FUNC_ON_BUS];
70
wdenka1191902005-01-09 17:12:27 +000071int pci_read_config_dword (pci_dev_t dev, int where, unsigned int *val)
72{
73 unsigned int retval;
74 unsigned int addr;
75
76 /*address bits 31:28 specify the device 10:8 specify the function */
77 /*Set the address to be read */
78 addr = BIT ((31 - dev)) | (where & ~3);
79 non_prefetch_read (addr, NP_CMD_CONFIGREAD, &retval);
80
81 *val = retval;
82
83 return (OK);
84}
85
86int pci_read_config_word (pci_dev_t dev, int where, unsigned short *val)
87{
88 unsigned int n;
89 unsigned int retval;
90 unsigned int addr;
91 unsigned int byteEnables;
92
93 n = where % 4;
94 /*byte enables are 4 bits active low, the position of each
95 bit maps to the byte that it enables */
96 byteEnables =
97 (~(BIT (n) | BIT ((n + 1)))) &
98 IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
99 byteEnables = byteEnables << PCI_NP_CBE_BESL;
100 /*address bits 31:28 specify the device 10:8 specify the function */
101 /*Set the address to be read */
102 addr = BIT ((31 - dev)) | (where & ~3);
103 non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
104
105 /*Pick out the word we are interested in */
106 *val = (retval >> (8 * n));
107
108 return (OK);
109}
110
111int pci_read_config_byte (pci_dev_t dev, int where, unsigned char *val)
112{
113 unsigned int retval;
114 unsigned int n;
115 unsigned int byteEnables;
116 unsigned int addr;
117
118 n = where % 4;
119 /*byte enables are 4 bits, active low, the position of each
120 bit maps to the byte that it enables */
121 byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
122 byteEnables = byteEnables << PCI_NP_CBE_BESL;
123
124 /*address bits 31:28 specify the device, 10:8 specify the function */
125 /*Set the address to be read */
126 addr = BIT ((31 - dev)) | (where & ~3);
127 non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
128 /*Pick out the byte we are interested in */
129 *val = (retval >> (8 * n));
130
131 return (OK);
132}
133
134int pci_write_config_byte (pci_dev_t dev, int where, unsigned char val)
135{
136 unsigned int addr;
137 unsigned int byteEnables;
138 unsigned int n;
139 unsigned int ldata;
140
141 n = where % 4;
142 /*byte enables are 4 bits active low, the position of each
143 bit maps to the byte that it enables */
144 byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
145 byteEnables = byteEnables << PCI_NP_CBE_BESL;
146 ldata = val << (8 * n);
147 /*address bits 31:28 specify the device 10:8 specify the function */
148 /*Set the address to be written */
149 addr = BIT ((31 - dev)) | (where & ~3);
150 non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
151
152 return (OK);
153}
154
155int pci_write_config_word (pci_dev_t dev, int where, unsigned short val)
156{
157 unsigned int addr;
158 unsigned int byteEnables;
159 unsigned int n;
160 unsigned int ldata;
161
162 n = where % 4;
163 /*byte enables are 4 bits active low, the position of each
164 bit maps to the byte that it enables */
165 byteEnables =
166 (~(BIT (n) | BIT ((n + 1)))) &
167 IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
168 byteEnables = byteEnables << PCI_NP_CBE_BESL;
169 ldata = val << (8 * n);
170 /*address bits 31:28 specify the device 10:8 specify the function */
171 /*Set the address to be written */
172 addr = BIT (31 - dev) | (where & ~3);
173 non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
174
175 return (OK);
176}
177
178int pci_write_config_dword (pci_dev_t dev, int where, unsigned int val)
179{
180 unsigned int addr;
181
182 /*address bits 31:28 specify the device 10:8 specify the function */
183 /*Set the address to be written */
184 addr = BIT (31 - dev) | (where & ~3);
185 non_prefetch_write (addr, NP_CMD_CONFIGWRITE, val);
186
187 return (OK);
188}
189
190void non_prefetch_read (unsigned int addr,
191 unsigned int cmd, unsigned int *data)
192{
193 REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
194
195 /*set up and execute the read */
196 REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd);
197
198 /*The result of the read is now in np_rdata */
199 REG_READ (PCI_CSR_BASE, PCI_NP_RDATA_OFFSET, *data);
200
201 return;
202}
203
204void non_prefetch_write (unsigned int addr,
205 unsigned int cmd, unsigned int data)
206{
207
208 REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
209 /*set up the write */
210 REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd);
211 /*Execute the write by writing to NP_WDATA */
212 REG_WRITE (PCI_CSR_BASE, PCI_NP_WDATA_OFFSET, data);
213
214 return;
215}
216
217/*
218 * PCI controller config registers are accessed through these functions
219 * i.e. these allow us to set up our own BARs etc.
220 */
221void crp_read (unsigned int offset, unsigned int *data)
222{
223 REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET, offset);
224 REG_READ (PCI_CSR_BASE, PCI_CRP_RDATA_OFFSET, *data);
225}
226
227void crp_write (unsigned int offset, unsigned int data)
228{
229 /*The CRP address register bit 16 indicates that we want to do a write */
230 REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET,
231 PCI_CRP_WRITE | offset);
232 REG_WRITE (PCI_CSR_BASE, PCI_CRP_WDATA_OFFSET, data);
233}
234
235/*struct pci_controller *hose*/
236void pci_ixp_init (struct pci_controller *hose)
237{
238 unsigned int regval;
239
240 hose->first_busno = 0;
241 hose->last_busno = 0x00;
242
243 /* System memory space */
244 pci_set_region (hose->regions + 0,
245 PCI_MEMORY_BUS,
246 PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_MEMORY);
247
248 /* PCI memory space */
249 pci_set_region (hose->regions + 1,
250 PCI_MEM_BUS,
251 PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM);
252 /* PCI I/O space */
253 pci_set_region (hose->regions + 2,
254 PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO);
255
256 hose->region_count = 3;
257
258 pci_register_hose (hose);
259
260/*
261 ==========================================================
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200262 Init IXP PCI
wdenka1191902005-01-09 17:12:27 +0000263 ==========================================================
264*/
265 REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
266 regval |= 1 << 2;
267 REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
268
269 configure_pins ();
270
271 READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval);
272 WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval & (~(1 << 13)));
273 udelay (533);
274 sys_pci_gpio_clock_config ();
275 REG_WRITE (PCI_CSR_BASE, PCI_INTEN_OFFSET, 0);
276 udelay (100);
277 READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval);
278 WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval | (1 << 13));
279 udelay (533);
280 crp_write (PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_0_DEFAULT);
281 crp_write (PCI_CFG_BASE_ADDRESS_1, IXP425_PCI_BAR_1_DEFAULT);
282 crp_write (PCI_CFG_BASE_ADDRESS_2, IXP425_PCI_BAR_2_DEFAULT);
283 crp_write (PCI_CFG_BASE_ADDRESS_3, IXP425_PCI_BAR_3_DEFAULT);
284 crp_write (PCI_CFG_BASE_ADDRESS_4, IXP425_PCI_BAR_4_DEFAULT);
285 crp_write (PCI_CFG_BASE_ADDRESS_5, IXP425_PCI_BAR_5_DEFAULT);
286 /*Setup PCI-AHB and AHB-PCI address mappings */
287 REG_WRITE (PCI_CSR_BASE, PCI_AHBMEMBASE_OFFSET,
288 IXP425_PCI_AHBMEMBASE_DEFAULT);
289
290 REG_WRITE (PCI_CSR_BASE, PCI_AHBIOBASE_OFFSET,
291 IXP425_PCI_AHBIOBASE_DEFAULT);
292
293 REG_WRITE (PCI_CSR_BASE, PCI_PCIMEMBASE_OFFSET,
294 IXP425_PCI_PCIMEMBASE_DEFAULT);
295
296 crp_write (PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM);
297
298 REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
299 regval |= PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS;
300 REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
301 crp_write (PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME);
302 udelay (1000);
303
304 pci_write_config_word (0, PCI_CFG_COMMAND, INITIAL_PCI_CMD);
305 REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
306 | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
307#ifdef CONFIG_PCI_SCAN_SHOW
308 printf ("Device bus dev func deviceID vendorID \n");
309#endif
310 pci_bus_scan ();
311}
312
313void configure_pins (void)
314{
315 unsigned int regval;
316
317 /* Disable clock on GPIO PIN 14 */
318 READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
319 WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval & (~(1 << 8)));
320 READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
321
322 READ_GPIO_REG (IXP425_GPIO_GPOER, regval);
323 WRITE_GPIO_REG (IXP425_GPIO_GPOER,
324 (((~(3 << 13)) & regval) | (0xf << 8)));
325 READ_GPIO_REG (IXP425_GPIO_GPOER, regval);
326
327 READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval);
328 WRITE_GPIO_REG (IXP425_GPIO_GPIT2R,
329 (regval &
330 ((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1)));
331 READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval);
332
333 READ_GPIO_REG (IXP425_GPIO_GPISR, regval);
334 WRITE_GPIO_REG (IXP425_GPIO_GPISR, (regval | (0xf << 8)));
335 READ_GPIO_REG (IXP425_GPIO_GPISR, regval);
336}
337
338void sys_pci_gpio_clock_config (void)
339{
340 unsigned int regval;
341
342 READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
343 regval |= 0x1 << 4;
344 WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
345 READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
346 regval |= 0x1 << 8;
347 WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
348}
349
350void pci_bus_scan (void)
351{
352 unsigned int bus = 0, dev, func = 0;
353 unsigned short data16;
354 unsigned int data32;
355 unsigned char intPin;
356
357 /* Assign first device to ourselves */
358 devices[0].bus = 0;
359 devices[0].device = 0;
360 devices[0].func = 0;
361
362 crp_read (PCI_CFG_VENDOR_ID, &data32);
363
364 devices[0].vendor_id = data32 & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK;
365 devices[0].device_id = data32 >> 16;
366 devices[0].error = FALSE;
367 devices[0].bar[NO_BAR].size = 0; /*dummy - required */
368
369 nDevices = 1;
370
371 nMBars = 0;
372 nIOBars = 0;
373
374 for (dev = 0; dev < IXP425_PCI_MAX_DEV; dev++) {
375
376 /*Check whether a device is present */
377 if (pci_device_exists (dev) != TRUE) {
378
379 /*Clear error bits in ISR, write 1 to clear */
380 REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
381 | PCI_ISR_PFE | PCI_ISR_PPE |
382 PCI_ISR_AHBE);
383 continue;
384 }
385
386 /*A device is present, add an entry to the array */
387 devices[nDevices].bus = bus;
388 devices[nDevices].device = dev;
389 devices[nDevices].func = func;
390
391 pci_read_config_word (dev, PCI_CFG_VENDOR_ID, &data16);
392
393 devices[nDevices].vendor_id = data16;
394
395 pci_read_config_word (dev, PCI_CFG_DEVICE_ID, &data16);
396 devices[nDevices].device_id = data16;
397
398 /*The device is functioning correctly, set error to FALSE */
399 devices[nDevices].error = FALSE;
400
401 /*Figure out what BARs are on this device */
402 sys_pci_bar_info_get (nDevices, bus, dev, func);
403 /*Figure out what INTX# line the card uses */
404 pci_read_config_byte (dev, PCI_CFG_DEV_INT_PIN, &intPin);
405
406 /*assign the appropriate irq line */
407 if (intPin > PCI_IRQ_LINES) {
408 devices[nDevices].error = TRUE;
409 } else if (intPin != 0) {
410 /*This device uses an interrupt line */
411 /*devices[nDevices].irq = ixp425PciIntTranslate[dev][intPin-1]; */
412 devices[nDevices].irq = intPin;
413 }
414#ifdef CONFIG_PCI_SCAN_SHOW
415 printf ("%06d %03d %03d %04d %08d %08x\n", nDevices,
416 devices[nDevices].vendor_id);
417#endif
418 nDevices++;
419
420 }
421
422 calc_bars (memBars, nMBars, IXP425_PCI_BAR_MEM_BASE);
423 sys_pci_device_bars_write ();
424
425 REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
426 | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
427}
428
429void sys_pci_bar_info_get (unsigned int devnum,
430 unsigned int bus,
431 unsigned int dev, unsigned int func)
432{
433 unsigned int data32;
434 unsigned int tmp;
435 unsigned int size;
436
437 pci_write_config_dword (devnum,
438 PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_QUERY);
439 pci_read_config_dword (devnum, PCI_CFG_BASE_ADDRESS_0, &data32);
440
441 devices[devnum].bar[0].address = (data32 & 1);
442
443 if (data32 & 1) {
444 /* IO space */
445 tmp = data32 & ~0x3;
446 size = ~(tmp - 1);
447 devices[devnum].bar[0].size = size;
448
449 if (nIOBars < IXP425_PCI_MAX_BAR) {
450 ioBars[nIOBars++] = &devices[devnum].bar[0];
451 }
452 } else {
453 /* Mem space */
454 tmp = data32 & ~IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
455 size = ~(tmp - 1);
456 devices[devnum].bar[0].size = size;
457
458 if (nMBars < IXP425_PCI_MAX_BAR) {
459 memBars[nMBars++] = &devices[devnum].bar[0];
460 } else {
461 devices[devnum].error = TRUE;
462 }
463
464 }
465
466 devices[devnum].bar[1].size = 0;
467}
468
469void sortBars (PciBar * Bars[], unsigned int nBars)
470{
471 unsigned int i, j;
472 PciBar *tmp;
473
474 if (nBars == 0) {
475 return;
476 }
477
478 /* Sort biggest to smallest */
479 for (i = 0; i < nBars - 1; i++) {
480 for (j = i + 1; j < nBars; j++) {
481 if (Bars[j]->size > Bars[i]->size) {
482 /* swap them */
483 tmp = Bars[i];
484 Bars[i] = Bars[j];
485 Bars[j] = tmp;
486 }
487 }
488 }
489}
490
491void calc_bars (PciBar * Bars[], unsigned int nBars, unsigned int startAddr)
492{
493 unsigned int i;
494
495 if (nBars == 0) {
496 return;
497 }
498
499 for (i = 0; i < nBars; i++) {
500 Bars[i]->address |= startAddr;
501 startAddr += Bars[i]->size;
502 }
503}
504
505void sys_pci_device_bars_write (void)
506{
507 unsigned int i;
508 int addr;
509
510 for (i = 1; i < nDevices; i++) {
511 if (devices[i].error) {
512 continue;
513 }
514
515 pci_write_config_dword (devices[i].device,
516 PCI_CFG_BASE_ADDRESS_0,
517 devices[i].bar[0].address);
Wolfgang Denk3706ba12005-09-25 00:00:45 +0200518 addr = BIT (31 - devices[i].device) |
wdenk289f9322005-01-12 00:15:14 +0000519 (0 << PCI_NP_AD_FUNCSL) |
Wolfgang Denk3706ba12005-09-25 00:00:45 +0200520 (PCI_CFG_BASE_ADDRESS_0 & ~3);
wdenka1191902005-01-09 17:12:27 +0000521 pci_write_config_dword (devices[i].device,
522 PCI_CFG_DEV_INT_LINE, devices[i].irq);
523
524 pci_write_config_word (devices[i].device,
525 PCI_CFG_COMMAND, INITIAL_PCI_CMD);
526
527 }
528}
529
530
531int pci_device_exists (unsigned int deviceNo)
532{
533 unsigned int vendorId;
534 unsigned int regval;
535
536 pci_read_config_dword (deviceNo, PCI_CFG_VENDOR_ID, &vendorId);
537
538 /* There are two ways to find out an empty device.
539 * 1. check Master Abort bit after the access.
540 * 2. check whether the vendor id read back is 0x0.
541 */
542 REG_READ (PCI_CSR_BASE, PCI_ISR_OFFSET, regval);
543 if ((vendorId != 0x0) && ((regval & PCI_ISR_PFE) == 0)) {
544 return TRUE;
545 }
546 /*no device present, make sure that the master abort bit is reset */
547
548 REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE);
549 return FALSE;
550}
551
552pci_dev_t pci_find_devices (struct pci_device_id * ids, int devNo)
553{
554 unsigned int i;
555 unsigned int devdidvid;
556 unsigned int didvid;
557 unsigned int vendorId, deviceId;
558
559 vendorId = ids->vendor;
560 deviceId = ids->device;
561 didvid = ((deviceId << 16) & IXP425_PCI_TOP_WORD_OF_LONG_MASK) |
562 (vendorId & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK);
563
564 for (i = devNo + 1; i < nDevices; i++) {
565
566 pci_read_config_dword (devices[i].device, PCI_CFG_VENDOR_ID,
567 &devdidvid);
568
569 if (devdidvid == didvid) {
570 return devices[i].device;
571 }
572 }
573 return -1;
574}
575#endif /* CONFIG_PCI */