Kever Yang | c43acfd | 2018-12-20 11:33:42 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 2 | /* |
| 3 | * (C) Copyright 2017 Rockchip Electronics Co., Ltd. |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 4 | */ |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 5 | #include <common.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 6 | #include <clk.h> |
| 7 | #include <debug_uart.h> |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 8 | #include <dm.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 9 | #include <dt-structs.h> |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 10 | #include <ram.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 11 | #include <regmap.h> |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 12 | #include <syscon.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 13 | #include <asm/io.h> |
Kever Yang | 15f09a1 | 2019-03-28 11:01:23 +0800 | [diff] [blame] | 14 | #include <asm/arch-rockchip/clock.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 15 | #include <asm/arch-rockchip/cru_rk3328.h> |
Kever Yang | 15f09a1 | 2019-03-28 11:01:23 +0800 | [diff] [blame] | 16 | #include <asm/arch-rockchip/grf_rk3328.h> |
| 17 | #include <asm/arch-rockchip/sdram_common.h> |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 18 | #include <asm/arch-rockchip/sdram_rk3328.h> |
| 19 | #include <asm/arch-rockchip/uart.h> |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 20 | |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 21 | struct dram_info { |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 22 | #ifdef CONFIG_TPL_BUILD |
| 23 | struct rk3328_ddr_pctl_regs *pctl; |
| 24 | struct rk3328_ddr_phy_regs *phy; |
| 25 | struct clk ddr_clk; |
| 26 | struct rk3328_cru *cru; |
| 27 | struct rk3328_msch_regs *msch; |
| 28 | struct rk3328_ddr_grf_regs *ddr_grf; |
| 29 | #endif |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 30 | struct ram_info info; |
| 31 | struct rk3328_grf_regs *grf; |
| 32 | }; |
| 33 | |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 34 | #ifdef CONFIG_TPL_BUILD |
| 35 | |
| 36 | struct rk3328_sdram_channel sdram_ch; |
| 37 | |
| 38 | struct rockchip_dmc_plat { |
| 39 | #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| 40 | struct dtd_rockchip_rk3328_dmc dtplat; |
| 41 | #else |
| 42 | struct rk3328_sdram_params sdram_params; |
| 43 | #endif |
| 44 | struct regmap *map; |
| 45 | }; |
| 46 | |
| 47 | #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| 48 | static int conv_of_platdata(struct udevice *dev) |
| 49 | { |
| 50 | struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| 51 | struct dtd_rockchip_rk3328_dmc *dtplat = &plat->dtplat; |
| 52 | int ret; |
| 53 | |
| 54 | ret = regmap_init_mem_platdata(dev, dtplat->reg, |
| 55 | ARRAY_SIZE(dtplat->reg) / 2, |
| 56 | &plat->map); |
| 57 | if (ret) |
| 58 | return ret; |
| 59 | |
| 60 | return 0; |
| 61 | } |
| 62 | #endif |
| 63 | |
| 64 | static void rkclk_ddr_reset(struct dram_info *dram, |
| 65 | u32 ctl_srstn, u32 ctl_psrstn, |
| 66 | u32 phy_srstn, u32 phy_psrstn) |
| 67 | { |
| 68 | writel(ddrctrl_srstn_req(ctl_srstn) | ddrctrl_psrstn_req(ctl_psrstn) | |
| 69 | ddrphy_srstn_req(phy_srstn) | ddrphy_psrstn_req(phy_psrstn), |
| 70 | &dram->cru->softrst_con[5]); |
| 71 | writel(ddrctrl_asrstn_req(ctl_srstn), &dram->cru->softrst_con[9]); |
| 72 | } |
| 73 | |
| 74 | static void rkclk_set_dpll(struct dram_info *dram, unsigned int mhz) |
| 75 | { |
| 76 | unsigned int refdiv, postdiv1, postdiv2, fbdiv; |
| 77 | int delay = 1000; |
| 78 | |
| 79 | refdiv = 1; |
| 80 | if (mhz <= 300) { |
| 81 | postdiv1 = 4; |
| 82 | postdiv2 = 2; |
| 83 | } else if (mhz <= 400) { |
| 84 | postdiv1 = 6; |
| 85 | postdiv2 = 1; |
| 86 | } else if (mhz <= 600) { |
| 87 | postdiv1 = 4; |
| 88 | postdiv2 = 1; |
| 89 | } else if (mhz <= 800) { |
| 90 | postdiv1 = 3; |
| 91 | postdiv2 = 1; |
| 92 | } else if (mhz <= 1600) { |
| 93 | postdiv1 = 2; |
| 94 | postdiv2 = 1; |
| 95 | } else { |
| 96 | postdiv1 = 1; |
| 97 | postdiv2 = 1; |
| 98 | } |
| 99 | fbdiv = (mhz * refdiv * postdiv1 * postdiv2) / 24; |
| 100 | |
| 101 | writel(((0x1 << 4) << 16) | (0 << 4), &dram->cru->mode_con); |
| 102 | writel(POSTDIV1(postdiv1) | FBDIV(fbdiv), &dram->cru->dpll_con[0]); |
| 103 | writel(DSMPD(1) | POSTDIV2(postdiv2) | REFDIV(refdiv), |
| 104 | &dram->cru->dpll_con[1]); |
| 105 | |
| 106 | while (delay > 0) { |
| 107 | udelay(1); |
| 108 | if (LOCK(readl(&dram->cru->dpll_con[1]))) |
| 109 | break; |
| 110 | delay--; |
| 111 | } |
| 112 | |
| 113 | writel(((0x1 << 4) << 16) | (1 << 4), &dram->cru->mode_con); |
| 114 | } |
| 115 | |
| 116 | static void rkclk_configure_ddr(struct dram_info *dram, |
| 117 | struct rk3328_sdram_params *sdram_params) |
| 118 | { |
| 119 | void __iomem *phy_base = dram->phy; |
| 120 | |
| 121 | /* choose DPLL for ddr clk source */ |
| 122 | clrbits_le32(PHY_REG(phy_base, 0xef), 1 << 7); |
| 123 | |
| 124 | /* for inno ddr phy need 2*freq */ |
| 125 | rkclk_set_dpll(dram, sdram_params->ddr_freq * 2); |
| 126 | } |
| 127 | |
| 128 | static void phy_soft_reset(struct dram_info *dram) |
| 129 | { |
| 130 | void __iomem *phy_base = dram->phy; |
| 131 | |
| 132 | clrbits_le32(PHY_REG(phy_base, 0), 0x3 << 2); |
| 133 | udelay(1); |
| 134 | setbits_le32(PHY_REG(phy_base, 0), ANALOG_DERESET); |
| 135 | udelay(5); |
| 136 | setbits_le32(PHY_REG(phy_base, 0), DIGITAL_DERESET); |
| 137 | udelay(1); |
| 138 | } |
| 139 | |
| 140 | static int pctl_cfg(struct dram_info *dram, |
| 141 | struct rk3328_sdram_params *sdram_params) |
| 142 | { |
| 143 | u32 i; |
| 144 | void __iomem *pctl_base = dram->pctl; |
| 145 | |
| 146 | for (i = 0; sdram_params->pctl_regs.pctl[i][0] != 0xFFFFFFFF; i++) { |
| 147 | writel(sdram_params->pctl_regs.pctl[i][1], |
| 148 | pctl_base + sdram_params->pctl_regs.pctl[i][0]); |
| 149 | } |
| 150 | clrsetbits_le32(pctl_base + DDR_PCTL2_PWRTMG, |
| 151 | (0xff << 16) | 0x1f, |
| 152 | ((SR_IDLE & 0xff) << 16) | (PD_IDLE & 0x1f)); |
| 153 | /* |
| 154 | * dfi_lp_en_pd=1,dfi_lp_wakeup_pd=2 |
| 155 | * hw_lp_idle_x32=1 |
| 156 | */ |
| 157 | if (sdram_params->dramtype == LPDDR3) { |
| 158 | setbits_le32(pctl_base + DDR_PCTL2_DFILPCFG0, 1); |
| 159 | clrsetbits_le32(pctl_base + DDR_PCTL2_DFILPCFG0, |
| 160 | 0xf << 4, |
| 161 | 2 << 4); |
| 162 | } |
| 163 | clrsetbits_le32(pctl_base + DDR_PCTL2_HWLPCTL, |
| 164 | 0xfff << 16, |
| 165 | 1 << 16); |
| 166 | /* disable zqcs */ |
| 167 | setbits_le32(pctl_base + DDR_PCTL2_ZQCTL0, 1u << 31); |
| 168 | setbits_le32(pctl_base + 0x2000 + DDR_PCTL2_ZQCTL0, 1u << 31); |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | /* return ddrconfig value |
| 174 | * (-1), find ddrconfig fail |
| 175 | * other, the ddrconfig value |
| 176 | * only support cs0_row >= cs1_row |
| 177 | */ |
| 178 | static unsigned int calculate_ddrconfig(struct rk3328_sdram_params *sdram_params) |
| 179 | { |
| 180 | static const u16 ddr_cfg_2_rbc[] = { |
| 181 | /*************************** |
| 182 | * [5:4] row(13+n) |
| 183 | * [3] cs(0:0 cs, 1:2 cs) |
| 184 | * [2] bank(0:0bank,1:8bank) |
| 185 | * [1:0] col(11+n) |
| 186 | ****************************/ |
| 187 | /* row, cs, bank, col */ |
| 188 | ((3 << 4) | (0 << 3) | (1 << 2) | 0), |
| 189 | ((3 << 4) | (0 << 3) | (1 << 2) | 1), |
| 190 | ((2 << 4) | (0 << 3) | (1 << 2) | 2), |
| 191 | ((3 << 4) | (0 << 3) | (1 << 2) | 2), |
| 192 | ((2 << 4) | (0 << 3) | (1 << 2) | 3), |
| 193 | ((3 << 4) | (1 << 3) | (1 << 2) | 0), |
| 194 | ((3 << 4) | (1 << 3) | (1 << 2) | 1), |
| 195 | ((2 << 4) | (1 << 3) | (1 << 2) | 2), |
| 196 | ((3 << 4) | (0 << 3) | (0 << 2) | 1), |
| 197 | ((2 << 4) | (0 << 3) | (1 << 2) | 1), |
| 198 | }; |
| 199 | |
| 200 | static const u16 ddr4_cfg_2_rbc[] = { |
| 201 | /*************************** |
| 202 | * [6] cs 0:0cs 1:2 cs |
| 203 | * [5:3] row(13+n) |
| 204 | * [2] cs(0:0 cs, 1:2 cs) |
| 205 | * [1] bw 0: 16bit 1:32bit |
| 206 | * [0] diebw 0:8bit 1:16bit |
| 207 | ***************************/ |
| 208 | /* cs, row, cs, bw, diebw */ |
| 209 | ((0 << 6) | (3 << 3) | (0 << 2) | (1 << 1) | 0), |
| 210 | ((1 << 6) | (2 << 3) | (0 << 2) | (1 << 1) | 0), |
| 211 | ((0 << 6) | (4 << 3) | (0 << 2) | (0 << 1) | 0), |
| 212 | ((1 << 6) | (3 << 3) | (0 << 2) | (0 << 1) | 0), |
| 213 | ((0 << 6) | (4 << 3) | (0 << 2) | (1 << 1) | 1), |
| 214 | ((1 << 6) | (3 << 3) | (0 << 2) | (1 << 1) | 1), |
| 215 | ((1 << 6) | (4 << 3) | (0 << 2) | (0 << 1) | 1), |
| 216 | ((0 << 6) | (2 << 3) | (1 << 2) | (1 << 1) | 0), |
| 217 | ((0 << 6) | (3 << 3) | (1 << 2) | (0 << 1) | 0), |
| 218 | ((0 << 6) | (3 << 3) | (1 << 2) | (1 << 1) | 1), |
| 219 | ((0 << 6) | (4 << 3) | (1 << 2) | (0 << 1) | 1), |
| 220 | }; |
| 221 | |
| 222 | u32 cs, bw, die_bw, col, row, bank; |
| 223 | u32 i, tmp; |
| 224 | u32 ddrconf = -1; |
| 225 | |
| 226 | cs = sdram_ch.rank; |
| 227 | bw = sdram_ch.bw; |
| 228 | die_bw = sdram_ch.dbw; |
| 229 | col = sdram_ch.col; |
| 230 | row = sdram_ch.cs0_row; |
| 231 | bank = sdram_ch.bk; |
| 232 | |
| 233 | if (sdram_params->dramtype == DDR4) { |
| 234 | tmp = ((cs - 1) << 6) | ((row - 13) << 3) | (bw & 0x2) | die_bw; |
| 235 | for (i = 10; i < 17; i++) { |
| 236 | if (((tmp & 0x7) == (ddr4_cfg_2_rbc[i - 10] & 0x7)) && |
| 237 | ((tmp & 0x3c) <= (ddr4_cfg_2_rbc[i - 10] & 0x3c)) && |
| 238 | ((tmp & 0x40) <= (ddr4_cfg_2_rbc[i - 10] & 0x40))) { |
| 239 | ddrconf = i; |
| 240 | goto out; |
| 241 | } |
| 242 | } |
| 243 | } else { |
| 244 | if (bank == 2) { |
| 245 | ddrconf = 8; |
| 246 | goto out; |
| 247 | } |
| 248 | |
| 249 | tmp = ((row - 13) << 4) | (1 << 2) | ((bw + col - 11) << 0); |
| 250 | for (i = 0; i < 5; i++) |
| 251 | if (((tmp & 0xf) == (ddr_cfg_2_rbc[i] & 0xf)) && |
| 252 | ((tmp & 0x30) <= (ddr_cfg_2_rbc[i] & 0x30))) { |
| 253 | ddrconf = i; |
| 254 | goto out; |
| 255 | } |
| 256 | } |
| 257 | |
| 258 | out: |
| 259 | if (ddrconf > 20) |
| 260 | printf("calculate_ddrconfig error\n"); |
| 261 | |
| 262 | return ddrconf; |
| 263 | } |
| 264 | |
| 265 | /* n: Unit bytes */ |
| 266 | static void copy_to_reg(u32 *dest, u32 *src, u32 n) |
| 267 | { |
| 268 | int i; |
| 269 | |
| 270 | for (i = 0; i < n / sizeof(u32); i++) { |
| 271 | writel(*src, dest); |
| 272 | src++; |
| 273 | dest++; |
| 274 | } |
| 275 | } |
| 276 | |
| 277 | /******* |
| 278 | * calculate controller dram address map, and setting to register. |
| 279 | * argument sdram_ch.ddrconf must be right value before |
| 280 | * call this function. |
| 281 | *******/ |
| 282 | static void set_ctl_address_map(struct dram_info *dram, |
| 283 | struct rk3328_sdram_params *sdram_params) |
| 284 | { |
| 285 | void __iomem *pctl_base = dram->pctl; |
| 286 | |
| 287 | copy_to_reg((u32 *)(pctl_base + DDR_PCTL2_ADDRMAP0), |
| 288 | &addrmap[sdram_ch.ddrconfig][0], 9 * 4); |
| 289 | if (sdram_params->dramtype == LPDDR3 && sdram_ch.row_3_4) |
| 290 | setbits_le32(pctl_base + DDR_PCTL2_ADDRMAP6, 1 << 31); |
| 291 | if (sdram_params->dramtype == DDR4 && sdram_ch.bw == 0x1) |
| 292 | setbits_le32(pctl_base + DDR_PCTL2_PCCFG, 1 << 8); |
| 293 | |
| 294 | if (sdram_ch.rank == 1) |
| 295 | clrsetbits_le32(pctl_base + DDR_PCTL2_ADDRMAP0, 0x1f, 0x1f); |
| 296 | } |
| 297 | |
| 298 | static void phy_dll_bypass_set(struct dram_info *dram, u32 freq) |
| 299 | { |
| 300 | u32 tmp; |
| 301 | void __iomem *phy_base = dram->phy; |
| 302 | |
| 303 | setbits_le32(PHY_REG(phy_base, 0x13), 1 << 4); |
| 304 | clrbits_le32(PHY_REG(phy_base, 0x14), 1 << 3); |
| 305 | setbits_le32(PHY_REG(phy_base, 0x26), 1 << 4); |
| 306 | clrbits_le32(PHY_REG(phy_base, 0x27), 1 << 3); |
| 307 | setbits_le32(PHY_REG(phy_base, 0x36), 1 << 4); |
| 308 | clrbits_le32(PHY_REG(phy_base, 0x37), 1 << 3); |
| 309 | setbits_le32(PHY_REG(phy_base, 0x46), 1 << 4); |
| 310 | clrbits_le32(PHY_REG(phy_base, 0x47), 1 << 3); |
| 311 | setbits_le32(PHY_REG(phy_base, 0x56), 1 << 4); |
| 312 | clrbits_le32(PHY_REG(phy_base, 0x57), 1 << 3); |
| 313 | |
Simon South | 18c24c1 | 2019-10-06 12:28:13 -0400 | [diff] [blame] | 314 | if (freq <= 400) |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 315 | /* DLL bypass */ |
| 316 | setbits_le32(PHY_REG(phy_base, 0xa4), 0x1f); |
| 317 | else |
| 318 | clrbits_le32(PHY_REG(phy_base, 0xa4), 0x1f); |
Simon South | 18c24c1 | 2019-10-06 12:28:13 -0400 | [diff] [blame] | 319 | if (freq <= 680) |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 320 | tmp = 2; |
| 321 | else |
| 322 | tmp = 1; |
| 323 | writel(tmp, PHY_REG(phy_base, 0x28)); |
| 324 | writel(tmp, PHY_REG(phy_base, 0x38)); |
| 325 | writel(tmp, PHY_REG(phy_base, 0x48)); |
| 326 | writel(tmp, PHY_REG(phy_base, 0x58)); |
| 327 | } |
| 328 | |
| 329 | static void set_ds_odt(struct dram_info *dram, |
| 330 | struct rk3328_sdram_params *sdram_params) |
| 331 | { |
| 332 | u32 cmd_drv, clk_drv, dqs_drv, dqs_odt; |
| 333 | void __iomem *phy_base = dram->phy; |
| 334 | |
| 335 | if (sdram_params->dramtype == DDR3) { |
| 336 | cmd_drv = PHY_DDR3_RON_RTT_34ohm; |
| 337 | clk_drv = PHY_DDR3_RON_RTT_45ohm; |
| 338 | dqs_drv = PHY_DDR3_RON_RTT_34ohm; |
| 339 | dqs_odt = PHY_DDR3_RON_RTT_225ohm; |
| 340 | } else { |
| 341 | cmd_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm; |
| 342 | clk_drv = PHY_DDR4_LPDDR3_RON_RTT_43ohm; |
| 343 | dqs_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm; |
| 344 | dqs_odt = PHY_DDR4_LPDDR3_RON_RTT_240ohm; |
| 345 | } |
| 346 | /* DS */ |
| 347 | writel(cmd_drv, PHY_REG(phy_base, 0x11)); |
| 348 | clrsetbits_le32(PHY_REG(phy_base, 0x12), 0x1f << 3, cmd_drv << 3); |
| 349 | writel(clk_drv, PHY_REG(phy_base, 0x16)); |
| 350 | writel(clk_drv, PHY_REG(phy_base, 0x18)); |
| 351 | writel(dqs_drv, PHY_REG(phy_base, 0x20)); |
| 352 | writel(dqs_drv, PHY_REG(phy_base, 0x2f)); |
| 353 | writel(dqs_drv, PHY_REG(phy_base, 0x30)); |
| 354 | writel(dqs_drv, PHY_REG(phy_base, 0x3f)); |
| 355 | writel(dqs_drv, PHY_REG(phy_base, 0x40)); |
| 356 | writel(dqs_drv, PHY_REG(phy_base, 0x4f)); |
| 357 | writel(dqs_drv, PHY_REG(phy_base, 0x50)); |
| 358 | writel(dqs_drv, PHY_REG(phy_base, 0x5f)); |
| 359 | /* ODT */ |
| 360 | writel(dqs_odt, PHY_REG(phy_base, 0x21)); |
| 361 | writel(dqs_odt, PHY_REG(phy_base, 0x2e)); |
| 362 | writel(dqs_odt, PHY_REG(phy_base, 0x31)); |
| 363 | writel(dqs_odt, PHY_REG(phy_base, 0x3e)); |
| 364 | writel(dqs_odt, PHY_REG(phy_base, 0x41)); |
| 365 | writel(dqs_odt, PHY_REG(phy_base, 0x4e)); |
| 366 | writel(dqs_odt, PHY_REG(phy_base, 0x51)); |
| 367 | writel(dqs_odt, PHY_REG(phy_base, 0x5e)); |
| 368 | } |
| 369 | |
| 370 | static void phy_cfg(struct dram_info *dram, |
| 371 | struct rk3328_sdram_params *sdram_params) |
| 372 | { |
| 373 | u32 i; |
| 374 | void __iomem *phy_base = dram->phy; |
| 375 | |
| 376 | phy_dll_bypass_set(dram, sdram_params->ddr_freq); |
| 377 | for (i = 0; sdram_params->phy_regs.phy[i][0] != 0xFFFFFFFF; i++) { |
| 378 | writel(sdram_params->phy_regs.phy[i][1], |
| 379 | phy_base + sdram_params->phy_regs.phy[i][0]); |
| 380 | } |
| 381 | if (sdram_ch.bw == 2) { |
| 382 | clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 0xf << 4); |
| 383 | } else { |
| 384 | clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 3 << 4); |
| 385 | /* disable DQS2,DQS3 tx dll for saving power */ |
| 386 | clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3); |
| 387 | clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3); |
| 388 | } |
| 389 | set_ds_odt(dram, sdram_params); |
| 390 | /* deskew */ |
| 391 | setbits_le32(PHY_REG(phy_base, 2), 8); |
| 392 | copy_to_reg(PHY_REG(phy_base, 0xb0), |
| 393 | &sdram_params->skew.a0_a1_skew[0], 15 * 4); |
| 394 | copy_to_reg(PHY_REG(phy_base, 0x70), |
| 395 | &sdram_params->skew.cs0_dm0_skew[0], 44 * 4); |
| 396 | copy_to_reg(PHY_REG(phy_base, 0xc0), |
Simon South | c4b9d66 | 2019-10-06 12:28:14 -0400 | [diff] [blame] | 397 | &sdram_params->skew.cs1_dm0_skew[0], 44 * 4); |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 398 | } |
| 399 | |
| 400 | static int update_refresh_reg(struct dram_info *dram) |
| 401 | { |
| 402 | void __iomem *pctl_base = dram->pctl; |
| 403 | u32 ret; |
| 404 | |
| 405 | ret = readl(pctl_base + DDR_PCTL2_RFSHCTL3) ^ (1 << 1); |
| 406 | writel(ret, pctl_base + DDR_PCTL2_RFSHCTL3); |
| 407 | |
| 408 | return 0; |
| 409 | } |
| 410 | |
| 411 | static int data_training(struct dram_info *dram, u32 cs, u32 dramtype) |
| 412 | { |
| 413 | u32 ret; |
| 414 | u32 dis_auto_zq = 0; |
| 415 | void __iomem *pctl_base = dram->pctl; |
| 416 | void __iomem *phy_base = dram->phy; |
| 417 | |
| 418 | /* disable zqcs */ |
| 419 | if (!(readl(pctl_base + DDR_PCTL2_ZQCTL0) & |
| 420 | (1ul << 31))) { |
| 421 | dis_auto_zq = 1; |
| 422 | setbits_le32(pctl_base + DDR_PCTL2_ZQCTL0, 1 << 31); |
| 423 | } |
| 424 | /* disable auto refresh */ |
| 425 | setbits_le32(pctl_base + DDR_PCTL2_RFSHCTL3, 1); |
| 426 | update_refresh_reg(dram); |
| 427 | |
| 428 | if (dramtype == DDR4) { |
| 429 | clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0); |
| 430 | clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0); |
| 431 | clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0); |
| 432 | clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0); |
| 433 | } |
| 434 | /* choose training cs */ |
| 435 | clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs)); |
| 436 | /* enable gate training */ |
| 437 | clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 1); |
| 438 | udelay(50); |
| 439 | ret = readl(PHY_REG(phy_base, 0xff)); |
| 440 | /* disable gate training */ |
| 441 | clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 0); |
| 442 | /* restore zqcs */ |
| 443 | if (dis_auto_zq) |
| 444 | clrbits_le32(pctl_base + DDR_PCTL2_ZQCTL0, 1 << 31); |
| 445 | /* restore auto refresh */ |
| 446 | clrbits_le32(pctl_base + DDR_PCTL2_RFSHCTL3, 1); |
| 447 | update_refresh_reg(dram); |
| 448 | |
| 449 | if (dramtype == DDR4) { |
| 450 | clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0x2); |
| 451 | clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0x2); |
| 452 | clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0x2); |
| 453 | clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0x2); |
| 454 | } |
| 455 | |
| 456 | if (ret & 0x10) { |
| 457 | ret = -1; |
| 458 | } else { |
| 459 | ret = (ret & 0xf) ^ (readl(PHY_REG(phy_base, 0)) >> 4); |
| 460 | ret = (ret == 0) ? 0 : -1; |
| 461 | } |
| 462 | return ret; |
| 463 | } |
| 464 | |
| 465 | /* rank = 1: cs0 |
| 466 | * rank = 2: cs1 |
| 467 | * rank = 3: cs0 & cs1 |
| 468 | * note: be careful of keep mr original val |
| 469 | */ |
| 470 | static int write_mr(struct dram_info *dram, u32 rank, u32 mr_num, u32 arg, |
| 471 | u32 dramtype) |
| 472 | { |
| 473 | void __iomem *pctl_base = dram->pctl; |
| 474 | |
| 475 | while (readl(pctl_base + DDR_PCTL2_MRSTAT) & MR_WR_BUSY) |
| 476 | continue; |
| 477 | if (dramtype == DDR3 || dramtype == DDR4) { |
| 478 | writel((mr_num << 12) | (rank << 4) | (0 << 0), |
| 479 | pctl_base + DDR_PCTL2_MRCTRL0); |
| 480 | writel(arg, pctl_base + DDR_PCTL2_MRCTRL1); |
| 481 | } else { |
| 482 | writel((rank << 4) | (0 << 0), |
| 483 | pctl_base + DDR_PCTL2_MRCTRL0); |
| 484 | writel((mr_num << 8) | (arg & 0xff), |
| 485 | pctl_base + DDR_PCTL2_MRCTRL1); |
| 486 | } |
| 487 | |
| 488 | setbits_le32(pctl_base + DDR_PCTL2_MRCTRL0, 1u << 31); |
| 489 | while (readl(pctl_base + DDR_PCTL2_MRCTRL0) & (1u << 31)) |
| 490 | continue; |
| 491 | while (readl(pctl_base + DDR_PCTL2_MRSTAT) & MR_WR_BUSY) |
| 492 | continue; |
| 493 | |
| 494 | return 0; |
| 495 | } |
| 496 | |
| 497 | /* |
| 498 | * rank : 1:cs0, 2:cs1, 3:cs0&cs1 |
| 499 | * vrefrate: 4500: 45%, |
| 500 | */ |
| 501 | static int write_vrefdq(struct dram_info *dram, u32 rank, u32 vrefrate, |
| 502 | u32 dramtype) |
| 503 | { |
| 504 | u32 tccd_l, value; |
| 505 | u32 dis_auto_zq = 0; |
| 506 | void __iomem *pctl_base = dram->pctl; |
| 507 | |
| 508 | if (dramtype != DDR4 || vrefrate < 4500 || vrefrate > 9200) |
| 509 | return -1; |
| 510 | |
| 511 | tccd_l = (readl(pctl_base + DDR_PCTL2_DRAMTMG4) >> 16) & 0xf; |
| 512 | tccd_l = (tccd_l - 4) << 10; |
| 513 | |
| 514 | if (vrefrate > 7500) { |
| 515 | /* range 1 */ |
| 516 | value = ((vrefrate - 6000) / 65) | tccd_l; |
| 517 | } else { |
| 518 | /* range 2 */ |
| 519 | value = ((vrefrate - 4500) / 65) | tccd_l | (1 << 6); |
| 520 | } |
| 521 | |
| 522 | /* disable zqcs */ |
| 523 | if (!(readl(pctl_base + DDR_PCTL2_ZQCTL0) & |
| 524 | (1ul << 31))) { |
| 525 | dis_auto_zq = 1; |
| 526 | setbits_le32(pctl_base + DDR_PCTL2_ZQCTL0, 1 << 31); |
| 527 | } |
| 528 | /* disable auto refresh */ |
| 529 | setbits_le32(pctl_base + DDR_PCTL2_RFSHCTL3, 1); |
| 530 | update_refresh_reg(dram); |
| 531 | |
| 532 | /* enable vrefdq calibratin */ |
| 533 | write_mr(dram, rank, 6, value | (1 << 7), dramtype); |
| 534 | udelay(1);/* tvrefdqe */ |
| 535 | /* write vrefdq value */ |
| 536 | write_mr(dram, rank, 6, value | (1 << 7), dramtype); |
| 537 | udelay(1);/* tvref_time */ |
| 538 | write_mr(dram, rank, 6, value | (0 << 7), dramtype); |
| 539 | udelay(1);/* tvrefdqx */ |
| 540 | |
| 541 | /* restore zqcs */ |
| 542 | if (dis_auto_zq) |
| 543 | clrbits_le32(pctl_base + DDR_PCTL2_ZQCTL0, 1 << 31); |
| 544 | /* restore auto refresh */ |
| 545 | clrbits_le32(pctl_base + DDR_PCTL2_RFSHCTL3, 1); |
| 546 | update_refresh_reg(dram); |
| 547 | |
| 548 | return 0; |
| 549 | } |
| 550 | |
| 551 | #define _MAX_(x, y) ((x) > (y) ? (x) : (y)) |
| 552 | |
| 553 | static void rx_deskew_switch_adjust(struct dram_info *dram) |
| 554 | { |
| 555 | u32 i, deskew_val; |
| 556 | u32 gate_val = 0; |
| 557 | void __iomem *phy_base = dram->phy; |
| 558 | |
| 559 | for (i = 0; i < 4; i++) |
| 560 | gate_val = _MAX_(readl(PHY_REG(phy_base, 0xfb + i)), gate_val); |
| 561 | |
| 562 | deskew_val = (gate_val >> 3) + 1; |
| 563 | deskew_val = (deskew_val > 0x1f) ? 0x1f : deskew_val; |
| 564 | clrsetbits_le32(PHY_REG(phy_base, 0x6e), 0xc, (deskew_val & 0x3) << 2); |
| 565 | clrsetbits_le32(PHY_REG(phy_base, 0x6f), 0x7 << 4, |
| 566 | (deskew_val & 0x1c) << 2); |
| 567 | } |
| 568 | |
| 569 | #undef _MAX_ |
| 570 | |
| 571 | static void tx_deskew_switch_adjust(struct dram_info *dram) |
| 572 | { |
| 573 | void __iomem *phy_base = dram->phy; |
| 574 | |
| 575 | clrsetbits_le32(PHY_REG(phy_base, 0x6e), 0x3, 1); |
| 576 | } |
| 577 | |
| 578 | static void set_ddrconfig(struct dram_info *dram, u32 ddrconfig) |
| 579 | { |
| 580 | writel(ddrconfig, &dram->msch->ddrconf); |
| 581 | } |
| 582 | |
| 583 | static void dram_all_config(struct dram_info *dram, |
| 584 | struct rk3328_sdram_params *sdram_params) |
| 585 | { |
| 586 | u32 sys_reg = 0, tmp = 0; |
| 587 | |
| 588 | set_ddrconfig(dram, sdram_ch.ddrconfig); |
| 589 | |
| 590 | sys_reg |= SYS_REG_ENC_DDRTYPE(sdram_params->dramtype); |
| 591 | sys_reg |= SYS_REG_ENC_ROW_3_4(sdram_ch.row_3_4, 0); |
| 592 | sys_reg |= SYS_REG_ENC_RANK(sdram_ch.rank, 0); |
| 593 | sys_reg |= SYS_REG_ENC_COL(sdram_ch.col, 0); |
| 594 | sys_reg |= SYS_REG_ENC_BK(sdram_ch.bk, 0); |
| 595 | SYS_REG_ENC_CS0_ROW(sdram_ch.cs0_row, sys_reg, tmp, 0); |
| 596 | if (sdram_ch.cs1_row) |
| 597 | SYS_REG_ENC_CS1_ROW(sdram_ch.cs1_row, sys_reg, tmp, 0); |
| 598 | sys_reg |= SYS_REG_ENC_BW(sdram_ch.bw, 0); |
| 599 | sys_reg |= SYS_REG_ENC_DBW(sdram_ch.dbw, 0); |
| 600 | |
| 601 | writel(sys_reg, &dram->grf->os_reg[2]); |
| 602 | |
| 603 | writel(sdram_ch.noc_timings.ddrtiming.d32, &dram->msch->ddrtiming); |
| 604 | |
| 605 | writel(sdram_ch.noc_timings.ddrmode.d32, &dram->msch->ddrmode); |
| 606 | writel(sdram_ch.noc_timings.readlatency, &dram->msch->readlatency); |
| 607 | |
| 608 | writel(sdram_ch.noc_timings.activate.d32, &dram->msch->activate); |
| 609 | writel(sdram_ch.noc_timings.devtodev.d32, &dram->msch->devtodev); |
| 610 | writel(sdram_ch.noc_timings.ddr4timing.d32, &dram->msch->ddr4_timing); |
| 611 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging0); |
| 612 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging1); |
| 613 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging2); |
| 614 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging3); |
| 615 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging4); |
| 616 | writel(sdram_ch.noc_timings.agingx0, &dram->msch->aging5); |
| 617 | } |
| 618 | |
| 619 | static void enable_low_power(struct dram_info *dram, |
| 620 | struct rk3328_sdram_params *sdram_params) |
| 621 | { |
| 622 | void __iomem *pctl_base = dram->pctl; |
| 623 | |
| 624 | /* enable upctl2 axi clock auto gating */ |
| 625 | writel(0x00800000, &dram->ddr_grf->ddr_grf_con[0]); |
| 626 | writel(0x20012001, &dram->ddr_grf->ddr_grf_con[2]); |
| 627 | /* enable upctl2 core clock auto gating */ |
| 628 | writel(0x001e001a, &dram->ddr_grf->ddr_grf_con[2]); |
| 629 | /* enable sr, pd */ |
| 630 | if (PD_IDLE == 0) |
| 631 | clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1)); |
| 632 | else |
| 633 | setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1)); |
| 634 | if (SR_IDLE == 0) |
| 635 | clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1); |
| 636 | else |
| 637 | setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1); |
| 638 | setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 3)); |
| 639 | } |
| 640 | |
| 641 | static int sdram_init(struct dram_info *dram, |
| 642 | struct rk3328_sdram_params *sdram_params, u32 pre_init) |
| 643 | { |
| 644 | void __iomem *pctl_base = dram->pctl; |
| 645 | |
| 646 | rkclk_ddr_reset(dram, 1, 1, 1, 1); |
| 647 | udelay(10); |
| 648 | /* |
| 649 | * dereset ddr phy psrstn to config pll, |
| 650 | * if using phy pll psrstn must be dereset |
| 651 | * before config pll |
| 652 | */ |
| 653 | rkclk_ddr_reset(dram, 1, 1, 1, 0); |
| 654 | rkclk_configure_ddr(dram, sdram_params); |
| 655 | if (pre_init == 0) { |
| 656 | switch (sdram_params->dramtype) { |
| 657 | case DDR3: |
| 658 | printf("DDR3\n"); |
| 659 | break; |
| 660 | case DDR4: |
| 661 | printf("DDR4\n"); |
| 662 | break; |
| 663 | case LPDDR3: |
| 664 | default: |
| 665 | printf("LPDDR3\n"); |
| 666 | break; |
| 667 | } |
| 668 | } |
| 669 | /* release phy srst to provide clk to ctrl */ |
| 670 | rkclk_ddr_reset(dram, 1, 1, 0, 0); |
| 671 | udelay(10); |
| 672 | phy_soft_reset(dram); |
| 673 | /* release ctrl presetn, and config ctl registers */ |
| 674 | rkclk_ddr_reset(dram, 1, 0, 0, 0); |
| 675 | pctl_cfg(dram, sdram_params); |
| 676 | sdram_ch.ddrconfig = calculate_ddrconfig(sdram_params); |
| 677 | set_ctl_address_map(dram, sdram_params); |
| 678 | phy_cfg(dram, sdram_params); |
| 679 | |
| 680 | /* enable dfi_init_start to init phy after ctl srstn deassert */ |
| 681 | setbits_le32(pctl_base + DDR_PCTL2_DFIMISC, (1 << 5) | (1 << 4)); |
| 682 | rkclk_ddr_reset(dram, 0, 0, 0, 0); |
| 683 | /* wait for dfi_init_done and dram init complete */ |
| 684 | while ((readl(pctl_base + DDR_PCTL2_STAT) & 0x7) == 0) |
| 685 | continue; |
| 686 | |
| 687 | /* do ddr gate training */ |
| 688 | if (data_training(dram, 0, sdram_params->dramtype) != 0) { |
| 689 | printf("data training error\n"); |
| 690 | return -1; |
| 691 | } |
| 692 | |
| 693 | if (sdram_params->dramtype == DDR4) |
| 694 | write_vrefdq(dram, 0x3, 5670, sdram_params->dramtype); |
| 695 | |
| 696 | if (pre_init == 0) { |
| 697 | rx_deskew_switch_adjust(dram); |
| 698 | tx_deskew_switch_adjust(dram); |
| 699 | } |
| 700 | |
| 701 | dram_all_config(dram, sdram_params); |
| 702 | enable_low_power(dram, sdram_params); |
| 703 | |
| 704 | return 0; |
| 705 | } |
| 706 | |
| 707 | static u64 dram_detect_cap(struct dram_info *dram, |
| 708 | struct rk3328_sdram_params *sdram_params, |
| 709 | unsigned char channel) |
| 710 | { |
| 711 | void __iomem *pctl_base = dram->pctl; |
| 712 | |
| 713 | /* |
| 714 | * for ddr3: ddrconf = 3 |
| 715 | * for ddr4: ddrconf = 12 |
| 716 | * for lpddr3: ddrconf = 3 |
| 717 | * default bw = 1 |
| 718 | */ |
| 719 | u32 bk, bktmp; |
| 720 | u32 col, coltmp; |
| 721 | u32 row, rowtmp, row_3_4; |
| 722 | void __iomem *test_addr, *test_addr1; |
| 723 | u32 dbw; |
| 724 | u32 cs; |
| 725 | u32 bw = 1; |
| 726 | u64 cap = 0; |
| 727 | u32 dram_type = sdram_params->dramtype; |
| 728 | u32 pwrctl; |
| 729 | |
| 730 | if (dram_type != DDR4) { |
| 731 | /* detect col and bk for ddr3/lpddr3 */ |
| 732 | coltmp = 12; |
| 733 | bktmp = 3; |
| 734 | rowtmp = 16; |
| 735 | |
| 736 | for (col = coltmp; col >= 9; col -= 1) { |
| 737 | writel(0, SDRAM_ADDR); |
| 738 | test_addr = (void __iomem *)(SDRAM_ADDR + |
| 739 | (1ul << (col + bw - 1ul))); |
| 740 | writel(PATTERN, test_addr); |
| 741 | if ((readl(test_addr) == PATTERN) && |
| 742 | (readl(SDRAM_ADDR) == 0)) |
| 743 | break; |
| 744 | } |
| 745 | if (col == 8) { |
| 746 | printf("col error\n"); |
| 747 | goto cap_err; |
| 748 | } |
| 749 | |
| 750 | test_addr = (void __iomem *)(SDRAM_ADDR + |
| 751 | (1ul << (coltmp + bktmp + bw - 1ul))); |
| 752 | writel(0, SDRAM_ADDR); |
| 753 | writel(PATTERN, test_addr); |
| 754 | if ((readl(test_addr) == PATTERN) && |
| 755 | (readl(SDRAM_ADDR) == 0)) |
| 756 | bk = 3; |
| 757 | else |
| 758 | bk = 2; |
| 759 | if (dram_type == LPDDR3) |
| 760 | dbw = 2; |
| 761 | else |
| 762 | dbw = 1; |
| 763 | } else { |
| 764 | /* detect bg for ddr4 */ |
| 765 | coltmp = 10; |
| 766 | bktmp = 4; |
| 767 | rowtmp = 17; |
| 768 | |
| 769 | col = 10; |
| 770 | bk = 2; |
| 771 | test_addr = (void __iomem *)(SDRAM_ADDR + |
| 772 | (1ul << (coltmp + bw + 1ul))); |
| 773 | writel(0, SDRAM_ADDR); |
| 774 | writel(PATTERN, test_addr); |
| 775 | if ((readl(test_addr) == PATTERN) && |
| 776 | (readl(SDRAM_ADDR) == 0)) |
| 777 | dbw = 0; |
| 778 | else |
| 779 | dbw = 1; |
| 780 | } |
| 781 | /* detect row */ |
| 782 | for (row = rowtmp; row > 12; row--) { |
| 783 | writel(0, SDRAM_ADDR); |
| 784 | test_addr = (void __iomem *)(SDRAM_ADDR + |
| 785 | (1ul << (row + bktmp + coltmp + bw - 1ul))); |
| 786 | writel(PATTERN, test_addr); |
| 787 | if ((readl(test_addr) == PATTERN) && |
| 788 | (readl(SDRAM_ADDR) == 0)) |
| 789 | break; |
| 790 | } |
| 791 | if (row == 12) { |
| 792 | printf("row error"); |
| 793 | goto cap_err; |
| 794 | } |
| 795 | /* detect row_3_4 */ |
| 796 | test_addr = SDRAM_ADDR; |
| 797 | test_addr1 = (void __iomem *)(SDRAM_ADDR + |
| 798 | (0x3ul << (row + bktmp + coltmp + bw - 1ul - 1ul))); |
| 799 | |
| 800 | writel(0, test_addr); |
| 801 | writel(PATTERN, test_addr1); |
| 802 | if ((readl(test_addr) == 0) && |
| 803 | (readl(test_addr1) == PATTERN)) |
| 804 | row_3_4 = 0; |
| 805 | else |
| 806 | row_3_4 = 1; |
| 807 | |
| 808 | /* disable auto low-power */ |
| 809 | pwrctl = readl(pctl_base + DDR_PCTL2_PWRCTL); |
| 810 | writel(0, pctl_base + DDR_PCTL2_PWRCTL); |
| 811 | |
| 812 | /* bw and cs detect using phy read gate training */ |
| 813 | if (data_training(dram, 1, dram_type) == 0) |
| 814 | cs = 1; |
| 815 | else |
| 816 | cs = 0; |
| 817 | |
| 818 | bw = 2; |
| 819 | |
| 820 | /* restore auto low-power */ |
| 821 | writel(pwrctl, pctl_base + DDR_PCTL2_PWRCTL); |
| 822 | |
| 823 | sdram_ch.rank = cs + 1; |
| 824 | sdram_ch.col = col; |
| 825 | sdram_ch.bk = bk; |
| 826 | sdram_ch.dbw = dbw; |
| 827 | sdram_ch.bw = bw; |
| 828 | sdram_ch.cs0_row = row; |
| 829 | if (cs) |
| 830 | sdram_ch.cs1_row = row; |
| 831 | else |
| 832 | sdram_ch.cs1_row = 0; |
| 833 | sdram_ch.row_3_4 = row_3_4; |
| 834 | |
| 835 | if (dram_type == DDR4) |
| 836 | cap = 1llu << (cs + row + bk + col + ((dbw == 0) ? 2 : 1) + bw); |
| 837 | else |
| 838 | cap = 1llu << (cs + row + bk + col + bw); |
| 839 | |
| 840 | return cap; |
| 841 | |
| 842 | cap_err: |
| 843 | return 0; |
| 844 | } |
| 845 | |
| 846 | static u32 remodify_sdram_params(struct rk3328_sdram_params *sdram_params) |
| 847 | { |
| 848 | u32 tmp = 0, tmp_adr = 0, i; |
| 849 | |
| 850 | for (i = 0; sdram_params->pctl_regs.pctl[i][0] != 0xFFFFFFFF; i++) { |
| 851 | if (sdram_params->pctl_regs.pctl[i][0] == 0) { |
| 852 | tmp = sdram_params->pctl_regs.pctl[i][1];/* MSTR */ |
| 853 | tmp_adr = i; |
| 854 | } |
| 855 | } |
| 856 | |
| 857 | tmp &= ~((3ul << 30) | (3ul << 24) | (3ul << 12)); |
| 858 | |
| 859 | switch (sdram_ch.dbw) { |
| 860 | case 2: |
| 861 | tmp |= (3ul << 30); |
| 862 | break; |
| 863 | case 1: |
| 864 | tmp |= (2ul << 30); |
| 865 | break; |
| 866 | case 0: |
| 867 | default: |
| 868 | tmp |= (1ul << 30); |
| 869 | break; |
| 870 | } |
| 871 | |
| 872 | if (sdram_ch.rank == 2) |
| 873 | tmp |= 3 << 24; |
| 874 | else |
| 875 | tmp |= 1 << 24; |
| 876 | |
| 877 | tmp |= (2 - sdram_ch.bw) << 12; |
| 878 | |
| 879 | sdram_params->pctl_regs.pctl[tmp_adr][1] = tmp; |
| 880 | |
| 881 | if (sdram_ch.bw == 2) |
| 882 | sdram_ch.noc_timings.ddrtiming.b.bwratio = 0; |
| 883 | else |
| 884 | sdram_ch.noc_timings.ddrtiming.b.bwratio = 1; |
| 885 | |
| 886 | return 0; |
| 887 | } |
| 888 | |
| 889 | static int dram_detect_cs1_row(struct rk3328_sdram_params *sdram_params, |
| 890 | unsigned char channel) |
| 891 | { |
| 892 | u32 ret = 0; |
| 893 | u32 cs1_bit; |
| 894 | void __iomem *test_addr, *cs1_addr; |
| 895 | u32 row, bktmp, coltmp, bw; |
| 896 | u32 ddrconf = sdram_ch.ddrconfig; |
| 897 | |
| 898 | if (sdram_ch.rank == 2) { |
| 899 | cs1_bit = addrmap[ddrconf][0] + 8; |
| 900 | |
| 901 | if (cs1_bit > 31) |
| 902 | goto out; |
| 903 | |
| 904 | cs1_addr = (void __iomem *)(1ul << cs1_bit); |
| 905 | if (cs1_bit < 20) |
| 906 | cs1_bit = 1; |
| 907 | else |
| 908 | cs1_bit = 0; |
| 909 | |
| 910 | if (sdram_params->dramtype == DDR4) { |
| 911 | if (sdram_ch.dbw == 0) |
| 912 | bktmp = sdram_ch.bk + 2; |
| 913 | else |
| 914 | bktmp = sdram_ch.bk + 1; |
| 915 | } else { |
| 916 | bktmp = sdram_ch.bk; |
| 917 | } |
| 918 | bw = sdram_ch.bw; |
| 919 | coltmp = sdram_ch.col; |
| 920 | |
| 921 | /* detect cs1 row */ |
| 922 | for (row = sdram_ch.cs0_row; row > 12; row--) { |
| 923 | test_addr = (void __iomem *)(SDRAM_ADDR + cs1_addr + |
| 924 | (1ul << (row + cs1_bit + bktmp + |
| 925 | coltmp + bw - 1ul))); |
| 926 | writel(0, SDRAM_ADDR + cs1_addr); |
| 927 | writel(PATTERN, test_addr); |
| 928 | if ((readl(test_addr) == PATTERN) && |
| 929 | (readl(SDRAM_ADDR + cs1_addr) == 0)) { |
| 930 | ret = row; |
| 931 | break; |
| 932 | } |
| 933 | } |
| 934 | } |
| 935 | |
| 936 | out: |
| 937 | return ret; |
| 938 | } |
| 939 | |
| 940 | static int sdram_init_detect(struct dram_info *dram, |
| 941 | struct rk3328_sdram_params *sdram_params) |
| 942 | { |
| 943 | debug("Starting SDRAM initialization...\n"); |
| 944 | |
| 945 | memcpy(&sdram_ch, &sdram_params->ch, |
| 946 | sizeof(struct rk3328_sdram_channel)); |
| 947 | |
| 948 | sdram_init(dram, sdram_params, 1); |
| 949 | dram_detect_cap(dram, sdram_params, 0); |
| 950 | |
| 951 | /* modify bw, cs related timing */ |
| 952 | remodify_sdram_params(sdram_params); |
| 953 | /* reinit sdram by real dram cap */ |
| 954 | sdram_init(dram, sdram_params, 0); |
| 955 | |
| 956 | /* redetect cs1 row */ |
| 957 | sdram_ch.cs1_row = |
| 958 | dram_detect_cs1_row(sdram_params, 0); |
| 959 | |
| 960 | return 0; |
| 961 | } |
| 962 | |
| 963 | static int rk3328_dmc_init(struct udevice *dev) |
| 964 | { |
| 965 | struct dram_info *priv = dev_get_priv(dev); |
| 966 | struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| 967 | int ret; |
| 968 | |
| 969 | #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| 970 | struct rk3328_sdram_params *params = &plat->sdram_params; |
| 971 | #else |
| 972 | struct dtd_rockchip_rk3328_dmc *dtplat = &plat->dtplat; |
| 973 | struct rk3328_sdram_params *params = |
| 974 | (void *)dtplat->rockchip_sdram_params; |
| 975 | |
| 976 | ret = conv_of_platdata(dev); |
| 977 | if (ret) |
| 978 | return ret; |
| 979 | #endif |
| 980 | priv->phy = regmap_get_range(plat->map, 0); |
| 981 | priv->pctl = regmap_get_range(plat->map, 1); |
| 982 | priv->grf = regmap_get_range(plat->map, 2); |
| 983 | priv->cru = regmap_get_range(plat->map, 3); |
| 984 | priv->msch = regmap_get_range(plat->map, 4); |
| 985 | priv->ddr_grf = regmap_get_range(plat->map, 5); |
| 986 | |
| 987 | debug("%s phy %p pctrl %p grf %p cru %p msch %p ddr_grf %p\n", |
| 988 | __func__, priv->phy, priv->pctl, priv->grf, priv->cru, |
| 989 | priv->msch, priv->ddr_grf); |
| 990 | ret = sdram_init_detect(priv, params); |
| 991 | if (ret < 0) { |
| 992 | printf("%s DRAM init failed%d\n", __func__, ret); |
| 993 | return ret; |
| 994 | } |
| 995 | |
| 996 | return 0; |
| 997 | } |
| 998 | |
| 999 | static int rk3328_dmc_ofdata_to_platdata(struct udevice *dev) |
| 1000 | { |
| 1001 | #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| 1002 | struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| 1003 | int ret; |
| 1004 | |
| 1005 | ret = dev_read_u32_array(dev, "rockchip,sdram-params", |
| 1006 | (u32 *)&plat->sdram_params, |
| 1007 | sizeof(plat->sdram_params) / sizeof(u32)); |
| 1008 | if (ret) { |
| 1009 | printf("%s: Cannot read rockchip,sdram-params %d\n", |
| 1010 | __func__, ret); |
| 1011 | return ret; |
| 1012 | } |
| 1013 | ret = regmap_init_mem(dev, &plat->map); |
| 1014 | if (ret) |
| 1015 | printf("%s: regmap failed %d\n", __func__, ret); |
| 1016 | #endif |
| 1017 | return 0; |
| 1018 | } |
| 1019 | |
| 1020 | #endif |
| 1021 | |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1022 | static int rk3328_dmc_probe(struct udevice *dev) |
| 1023 | { |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 1024 | #ifdef CONFIG_TPL_BUILD |
| 1025 | if (rk3328_dmc_init(dev)) |
| 1026 | return 0; |
| 1027 | #else |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1028 | struct dram_info *priv = dev_get_priv(dev); |
| 1029 | |
| 1030 | priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| 1031 | debug("%s: grf=%p\n", __func__, priv->grf); |
| 1032 | priv->info.base = CONFIG_SYS_SDRAM_BASE; |
| 1033 | priv->info.size = rockchip_sdram_size( |
| 1034 | (phys_addr_t)&priv->grf->os_reg[2]); |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 1035 | #endif |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1036 | return 0; |
| 1037 | } |
| 1038 | |
| 1039 | static int rk3328_dmc_get_info(struct udevice *dev, struct ram_info *info) |
| 1040 | { |
| 1041 | struct dram_info *priv = dev_get_priv(dev); |
| 1042 | |
| 1043 | *info = priv->info; |
| 1044 | |
| 1045 | return 0; |
| 1046 | } |
| 1047 | |
| 1048 | static struct ram_ops rk3328_dmc_ops = { |
| 1049 | .get_info = rk3328_dmc_get_info, |
| 1050 | }; |
| 1051 | |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1052 | static const struct udevice_id rk3328_dmc_ids[] = { |
| 1053 | { .compatible = "rockchip,rk3328-dmc" }, |
| 1054 | { } |
| 1055 | }; |
| 1056 | |
| 1057 | U_BOOT_DRIVER(dmc_rk3328) = { |
| 1058 | .name = "rockchip_rk3328_dmc", |
| 1059 | .id = UCLASS_RAM, |
| 1060 | .of_match = rk3328_dmc_ids, |
| 1061 | .ops = &rk3328_dmc_ops, |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 1062 | #ifdef CONFIG_TPL_BUILD |
| 1063 | .ofdata_to_platdata = rk3328_dmc_ofdata_to_platdata, |
| 1064 | #endif |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1065 | .probe = rk3328_dmc_probe, |
| 1066 | .priv_auto_alloc_size = sizeof(struct dram_info), |
Kever Yang | 85a3874 | 2019-08-02 10:39:59 +0300 | [diff] [blame] | 1067 | #ifdef CONFIG_TPL_BUILD |
| 1068 | .platdata_auto_alloc_size = sizeof(struct rockchip_dmc_plat), |
| 1069 | #endif |
Kever Yang | 39648e6 | 2017-06-23 16:11:07 +0800 | [diff] [blame] | 1070 | }; |