blob: 0067ea46e0ccbfe8a0a319fbd991b96833d5b587 [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * siemens rut
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * U-Boot file:/include/configs/am335x_evm.h
8 *
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef __CONFIG_RUT_H
15#define __CONFIG_RUT_H
16
17#define CONFIG_SIEMENS_RUT
18#define MACH_TYPE_RUT 4316
19#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT
20
21#include "siemens-am33x-common.h"
22
23#define CONFIG_SYS_MPUCLK 600
24#define RUT_IOCTRL_VAL 0x18b
25#define DDR_PLL_FREQ 303
26
27 /* Physical Memory Map */
28#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */
29
30/* I2C Configuration */
31#define CONFIG_SYS_I2C_SPEED 100000
32
33#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
34#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
35#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */
36#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */
37
38#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200
39
40#undef CONFIG_SPL_NET_SUPPORT
41#undef CONFIG_SPL_NET_VCI_STRING
42#undef CONFIG_SPL_ETH_SUPPORT
43
Heiko Schocherc0dcece2013-08-19 16:39:01 +020044#define CONFIG_PHY_NATSEMI
45
46#define CONFIG_FACTORYSET
47
48/* UBI Support */
49#ifndef CONFIG_SPL_BUILD
50#define CONFIG_CMD_MTDPARTS
51#define CONFIG_MTD_PARTITIONS
52#define CONFIG_MTD_DEVICE
53#define CONFIG_RBTREE
54#define CONFIG_LZO
55#define CONFIG_CMD_UBI
56#define CONFIG_CMD_UBIFS
57#endif
58
59/* Watchdog */
60#define WATCHDOG_TRIGGER_GPIO 14
61
62#ifndef CONFIG_SPL_BUILD
63
64/* Default env settings */
65#define CONFIG_EXTRA_ENV_SETTINGS \
66 "hostname=rut\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +010067 "nand_img_size=0x500000\0" \
68 "splashpos=m,m\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +020069 "optargs=fixrtc --no-log consoleblank=0 \0" \
70 CONFIG_COMMON_ENV_SETTINGS \
71 "mmc_dev=0\0" \
72 "mmc_root=/dev/mmcblk0p2 rw\0" \
73 "mmc_root_fs_type=ext4 rootwait\0" \
74 "mmc_load_uimage=" \
75 "mmc rescan; " \
76 "setenv bootfile uImage;" \
77 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
78 "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
79 "importbootenv=echo Importing environment from mmc ...; " \
80 "env import -t $loadaddr $filesize\0" \
81 "mmc_args=run bootargs_defaults;" \
82 "mtdparts default;" \
83 "setenv bootargs ${bootargs} " \
84 "root=${mmc_root} ${mtdparts}" \
85 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
86 "eth=${ethaddr} " \
87 "\0" \
88 "mmc_boot=run mmc_args; " \
89 "run mmc_load_uimage; " \
90 "bootm ${kloadaddr}\0" \
91 ""
92
93#ifndef CONFIG_RESTORE_FLASH
94/* set to negative value for no autoboot */
95#define CONFIG_BOOTDELAY 3
96
97#define CONFIG_BOOTCOMMAND \
98 "if mmc rescan; then " \
99 "echo SD/MMC found on device ${mmc_dev};" \
100 "if run loadbootenv; then " \
101 "echo Loaded environment from ${bootenv};" \
102 "run importbootenv;" \
103 "fi;" \
104 "if test -n $uenvcmd; then " \
105 "echo Running uenvcmd ...;" \
106 "run uenvcmd;" \
107 "fi;" \
108 "if run mmc_load_uimage; then " \
109 "run mmc_args;" \
110 "bootm ${kloadaddr};" \
111 "fi;" \
112 "fi;" \
113 "run nand_boot;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100114 "reset;"
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200115
116#else
117#define CONFIG_BOOTDELAY 0
118
119#define CONFIG_BOOTCOMMAND \
120 "setenv autoload no; " \
121 "dhcp; " \
122 "if tftp 80000000 debrick.scr; then " \
123 "source 80000000; " \
124 "fi"
125#endif
126
127#endif /* CONFIG_SPL_BUILD */
128
129#ifdef CONFIG_SPL_BUILD
130#undef CONFIG_HW_WATCHDOG
131#endif
132
133#define CONFIG_VIDEO
134#if defined(CONFIG_VIDEO)
135#define CONFIG_VIDEO_DA8XX
136#define CONFIG_CFB_CONSOLE
137#define CONFIG_VGA_AS_SINGLE_DEVICE
138#define CONFIG_SPLASH_SCREEN
139#define CONFIG_SPLASH_SCREEN_ALIGN
140#define CONFIG_VIDEO_LOGO
141#define CONFIG_VIDEO_BMP_RLE8
142#define CONFIG_VIDEO_BMP_LOGO
143#define CONFIG_CMD_BMP
144#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
145
146#define CONFIG_SPI
147#define CONFIG_OMAP3_SPI
148
149#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */
150#define CONFIG_ARCH_EARLY_INIT_R
151#define CONFIG_FORMIKE
Samuel Egli56eb3da2013-11-04 14:05:03 +0100152#define DISPL_PLL_SPREAD_SPECTRUM
153#define CONFIG_SYS_CONSOLE_BG_COL 0xff
154#define CONFIG_SYS_CONSOLE_FG_COL 0x00
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200155#endif
156
Heiko Schocher0c331eb2014-11-18 11:51:06 +0100157#ifndef CONFIG_SPL_BUILD
158#define CONFIG_FIT
159#endif
160
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200161#endif /* ! __CONFIG_RUT_H */