arch/arm/dts/stm32f7-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0+

#include <dt-bindings/memory/stm32-sdram.h>
/{
	soc {
		u-boot,dm-pre-reloc;

		fmc: fmc@A0000000 {
			compatible = "st,stm32-fmc";
			reg = <0xA0000000 0x1000>;
			clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
			pinctrl-0 = <&fmc_pins>;
			pinctrl-names = "default";
			status = "okay";
			u-boot,dm-pre-reloc;
		};

		mac: ethernet@40028000 {
			compatible = "st,stm32-dwmac";
			reg = <0x40028000 0x8000>;
			reg-names = "stmmaceth";
			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
				 <&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
				 <&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
			interrupts = <61>, <62>;
			interrupt-names = "macirq", "eth_wake_irq";
			snps,pbl = <8>;
			snps,mixed-burst;
			dma-ranges;
			pinctrl-0 = <&ethernet_mii>;
			phy-mode = "rmii";
			phy-handle = <&phy0>;

			status = "okay";

			mdio0 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,dwmac-mdio";
				phy0: ethernet-phy@0 {
					reg = <0>;
				};
			};
		};

		qspi: quadspi@A0001000 {
			compatible = "st,stm32f469-qspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
			reg-names = "qspi", "qspi_mm";
			interrupts = <92>;
			spi-max-frequency = <108000000>;
			clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
			resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
			pinctrl-0 = <&qspi_pins>;

			status = "okay";
		};
	};
};

&clk_hse {
	u-boot,dm-pre-reloc;
};

&gpioa {
	u-boot,dm-pre-reloc;
};

&gpiob {
	u-boot,dm-pre-reloc;
};

&gpioc {
	u-boot,dm-pre-reloc;
};

&gpiod {
	u-boot,dm-pre-reloc;
};

&gpioe {
	u-boot,dm-pre-reloc;
};

&gpiof {
	u-boot,dm-pre-reloc;
};

&gpiog {
	u-boot,dm-pre-reloc;
};

&gpioh {
	u-boot,dm-pre-reloc;
};

&gpioi {
	u-boot,dm-pre-reloc;
};

&pinctrl {
	u-boot,dm-pre-reloc;

	fmc_pins: fmc@0 {
		u-boot,dm-pre-reloc;
		pins
		{
		 u-boot,dm-pre-reloc;
		};
	};
};

&pwrcfg {
	u-boot,dm-pre-reloc;
};

&rcc {
	u-boot,dm-pre-reloc;
};

&timer5 {
	u-boot,dm-pre-reloc;
};

&usart1 {
	u-boot,dm-pre-reloc;
	clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
};