blob: bc8cb0c443afa9ca7ef2aa292903f969051553cb [file] [log] [blame]
Feng Kan0ce5c862008-07-08 22:48:42 -07001/*
2 * This is the main board level file for the Redwood AMCC board.
3 *
4 * (C) Copyright 2008
5 * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 *
25 */
26
27#include <common.h>
28#include "redwood.h"
29#include <ppc4xx.h>
30#include <asm/processor.h>
31#include <i2c.h>
32#include <asm-ppc/io.h>
33
34int compare_to_true(char *str);
35char *remove_l_w_space(char *in_str);
36char *remove_t_w_space(char *in_str);
37int get_console_port(void);
38
39static void early_init_EBC(void);
40static int bootdevice_selected(void);
41static void early_reinit_EBC(int);
42static void early_init_UIC(void);
43
Stefan Roese1d055472008-07-11 11:34:52 +020044/*
45 * Define Boot devices
46 */
Feng Kan0ce5c862008-07-08 22:48:42 -070047#define BOOT_FROM_8BIT_SRAM 0x00
48#define BOOT_FROM_16BIT_SRAM 0x01
49#define BOOT_FROM_32BIT_SRAM 0x02
50#define BOOT_FROM_8BIT_NAND 0x03
51#define BOOT_FROM_16BIT_NOR 0x04
52#define BOOT_DEVICE_UNKNOWN 0xff
53
Stefan Roese1d055472008-07-11 11:34:52 +020054/*
55 * EBC Devices Characteristics
56 * Peripheral Bank Access Parameters - EBC_BxAP
57 * Peripheral Bank Configuration Register - EBC_BxCR
58 */
Feng Kan0ce5c862008-07-08 22:48:42 -070059
60/*
61 * 8 bit width SRAM
62 * BU Value
63 * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
64 * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000
65 * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000
66 */
Stefan Roese1d055472008-07-11 11:34:52 +020067#define EBC_BXAP_8BIT_SRAM \
68 EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
69 EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
70 EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
71 EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
72 EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
73 EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
74 EBC_BXAP_PEN_DISABLED
Feng Kan0ce5c862008-07-08 22:48:42 -070075
76#define EBC_BXAP_16BIT_SRAM EBC_BXAP_8BIT_SRAM
77#define EBC_BXAP_32BIT_SRAM EBC_BXAP_8BIT_SRAM
78
79/*
80 * NAND flash
81 * BU Value
82 * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
83 * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
84 * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
85*/
Stefan Roese1d055472008-07-11 11:34:52 +020086#define EBC_BXAP_NAND \
87 EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
88 EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
89 EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
90 EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
91 EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
92 EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
93 EBC_BXAP_PEN_DISABLED
Feng Kan0ce5c862008-07-08 22:48:42 -070094
95/*
96 * NOR flash
97 * BU Value
98 * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
99 * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
100 * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
101*/
Stefan Roese1d055472008-07-11 11:34:52 +0200102#define EBC_BXAP_NOR \
103 EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
104 EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
105 EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
106 EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
107 EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
108 EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
109 EBC_BXAP_PEN_DISABLED
Feng Kan0ce5c862008-07-08 22:48:42 -0700110
111/*
112 * FPGA
113 * BU value :
114 * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
115 * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000
116 */
Stefan Roese1d055472008-07-11 11:34:52 +0200117#define EBC_BXAP_FPGA \
118 EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(11) | \
119 EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
120 EBC_BXAP_CSN_ENCODE(10) | EBC_BXAP_OEN_ENCODE(1) | \
121 EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | \
122 EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_RE_DISABLED | \
123 EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_RW | \
124 EBC_BXAP_PEN_DISABLED
Feng Kan0ce5c862008-07-08 22:48:42 -0700125
Stefan Roese1d055472008-07-11 11:34:52 +0200126#define EBC_BXCR_8BIT_SRAM_CS0 \
127 EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_1MB | \
128 EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700129
Stefan Roese1d055472008-07-11 11:34:52 +0200130#define EBC_BXCR_32BIT_SRAM_CS0 \
131 EBC_BXCR_BAS_ENCODE(0xFFC00000) | EBC_BXCR_BS_1MB | \
132 EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700133
Stefan Roese1d055472008-07-11 11:34:52 +0200134#define EBC_BXCR_NAND_CS0 \
135 EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
136 EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700137
Stefan Roese1d055472008-07-11 11:34:52 +0200138#define EBC_BXCR_16BIT_SRAM_CS0 \
139 EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_2MB | \
140 EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700141
Stefan Roese1d055472008-07-11 11:34:52 +0200142#define EBC_BXCR_NOR_CS0 \
143 EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
144 EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700145
Stefan Roese1d055472008-07-11 11:34:52 +0200146#define EBC_BXCR_NOR_CS1 \
147 EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
148 EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700149
Stefan Roese1d055472008-07-11 11:34:52 +0200150#define EBC_BXCR_NAND_CS1 \
151 EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
152 EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700153
Stefan Roese1d055472008-07-11 11:34:52 +0200154#define EBC_BXCR_NAND_CS2 \
155 EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_128MB | \
156 EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700157
Stefan Roese1d055472008-07-11 11:34:52 +0200158#define EBC_BXCR_SRAM_CS2 \
159 EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_4MB | \
160 EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700161
Stefan Roese1d055472008-07-11 11:34:52 +0200162#define EBC_BXCR_LARGE_FLASH_CS2 \
163 EBC_BXCR_BAS_ENCODE(0xE7000000) | EBC_BXCR_BS_16MB | \
164 EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700165
Stefan Roese1d055472008-07-11 11:34:52 +0200166#define EBC_BXCR_FPGA_CS3 \
167 EBC_BXCR_BAS_ENCODE(0xE2000000) | EBC_BXCR_BS_1MB | \
168 EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
Feng Kan0ce5c862008-07-08 22:48:42 -0700169
170/*****************************************************************************
171 * UBOOT initiated board specific function calls
172 ****************************************************************************/
173
174int board_early_init_f(void)
175{
176 int computed_boot_device = BOOT_DEVICE_UNKNOWN;
177
178 /*
179 * Initialise EBC
180 */
181 early_init_EBC();
182
183 /*
184 * Determine which boot device was selected
185 */
186 computed_boot_device = bootdevice_selected();
187
188 /*
189 * Reinit EBC based on selected boot device
190 */
191 early_reinit_EBC(computed_boot_device);
192
193 /*
194 * Setup for UIC on 460SX redwood board
195 */
196 early_init_UIC();
197
198 return 0;
199}
200
201int checkboard(void)
202{
203 char *s = getenv("serial#");
204
205 printf("Board: Redwood - AMCC 460SX Reference Board");
206 if (s != NULL) {
207 puts(", serial# ");
208 puts(s);
209 }
210 putc('\n');
211
212 return 0;
213}
214
215static void early_init_EBC(void)
216{
Stefan Roese1d055472008-07-11 11:34:52 +0200217 /*
218 * Initialize EBC CONFIG -
219 * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
220 * default value :
221 * 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
222 */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200223 mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
Feng Kan0ce5c862008-07-08 22:48:42 -0700224 EBC_CFG_PTD_ENABLE |
225 EBC_CFG_RTC_16PERCLK |
226 EBC_CFG_ATC_PREVIOUS |
227 EBC_CFG_DTC_PREVIOUS |
228 EBC_CFG_CTC_PREVIOUS |
229 EBC_CFG_OEO_PREVIOUS |
230 EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16);
231
Stefan Roese1d055472008-07-11 11:34:52 +0200232 /*
233 * PART 1 : Initialize EBC Bank 3
234 * ==============================
235 * Bank1 is always associated to the EPLD.
236 * It has to be initialized prior to other banks settings computation
237 * since some board registers values may be needed to determine the
238 * boot type
239 */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200240 mtebc(PB1AP, EBC_BXAP_FPGA);
241 mtebc(PB1CR, EBC_BXCR_FPGA_CS3);
Feng Kan0ce5c862008-07-08 22:48:42 -0700242
243}
244
245static int bootdevice_selected(void)
246{
247 unsigned long sdr0_pinstp;
248 unsigned long bootstrap_settings;
249 int computed_boot_device = BOOT_DEVICE_UNKNOWN;
250
Stefan Roese1d055472008-07-11 11:34:52 +0200251 /*
252 * Determine which boot device was selected
253 * =================================================
254 *
255 * Read Pin Strap Register in PPC460SX
256 * Result can either be :
257 * - Boot strap = boot from EBC 8bits => Small Flash
258 * - Boot strap = boot from PCI
259 * - Boot strap = IIC
260 * In case of boot from IIC, read Serial Device Strap Register1
261 *
262 * Result can either be :
263 * - Boot from EBC - EBC Bus Width = 8bits => Small Flash
264 * - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM
265 * - Boot from PCI
266 */
267
Feng Kan0ce5c862008-07-08 22:48:42 -0700268 /* Read Pin Strap Register in PPC460SX */
269 mfsdr(SDR0_PINSTP, sdr0_pinstp);
270 bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK;
271
272 switch (bootstrap_settings) {
273 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
274 /*
275 * Boot from SRAM, 8bit width
276 */
277 computed_boot_device = BOOT_FROM_8BIT_SRAM;
278 break;
279 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
280 /*
281 * Boot from SRAM, 32bit width
282 */
283 computed_boot_device = BOOT_FROM_32BIT_SRAM;
284 break;
285 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
286 /*
287 * Boot from NAND, 8bit width
288 */
289 computed_boot_device = BOOT_FROM_8BIT_NAND;
290 break;
291 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
292 /*
293 * Boot from SRAM, 16bit width
294 * Boot setting in IIC EEPROM 0x50
295 */
296 computed_boot_device = BOOT_FROM_16BIT_SRAM;
297 break;
298 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5:
299 /*
300 * Boot from NOR, 16bit width
301 * Boot setting in IIC EEPROM 0x54
302 */
303 computed_boot_device = BOOT_FROM_16BIT_NOR;
304 break;
305 default:
306 /* should not be */
307 computed_boot_device = BOOT_DEVICE_UNKNOWN;
308 break;
309 }
310
311 return computed_boot_device;
312}
313
314static void early_reinit_EBC(int computed_boot_device)
315{
Stefan Roese1d055472008-07-11 11:34:52 +0200316 /*
317 * Compute EBC settings depending on selected boot device
318 * ======================================================
319 *
320 * Resulting EBC init will be among following configurations :
321 *
322 * - Boot from EBC 8bits => boot from Small Flash selected
323 * EBC-CS0 = Small Flash
324 * EBC-CS2 = Large Flash and SRAM
325 *
326 * - Boot from EBC 16bits => boot from Large Flash or SRAM
327 * EBC-CS0 = Large Flash or SRAM
328 * EBC-CS2 = Small Flash
329 *
330 * - Boot from PCI
331 * EBC-CS0 = not initialized to avoid address contention
332 * EBC-CS2 = same as boot from Small Flash selected
333 */
334
Feng Kan0ce5c862008-07-08 22:48:42 -0700335 unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
336 unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0;
337 unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
338
339 switch (computed_boot_device) {
340 /*-------------------------------------------------------------------*/
341 case BOOT_FROM_8BIT_SRAM:
342 /*-------------------------------------------------------------------*/
343 ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM;
344 ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0;
345 ebc0_cs1_bxap_value = EBC_BXAP_NOR;
346 ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
347 ebc0_cs2_bxap_value = EBC_BXAP_NAND;
348 ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
349 break;
350
351 /*-------------------------------------------------------------------*/
352 case BOOT_FROM_16BIT_SRAM:
353 /*-------------------------------------------------------------------*/
354 ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM;
355 ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0;
356 ebc0_cs1_bxap_value = EBC_BXAP_NOR;
357 ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
358 ebc0_cs2_bxap_value = EBC_BXAP_NAND;
359 ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
360 break;
361
362 /*-------------------------------------------------------------------*/
363 case BOOT_FROM_32BIT_SRAM:
364 /*-------------------------------------------------------------------*/
365 ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM;
366 ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0;
367 ebc0_cs1_bxap_value = EBC_BXAP_NOR;
368 ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
369 ebc0_cs2_bxap_value = EBC_BXAP_NAND;
370 ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
371 break;
372
373 /*-------------------------------------------------------------------*/
374 case BOOT_FROM_16BIT_NOR:
375 /*-------------------------------------------------------------------*/
376 ebc0_cs0_bxap_value = EBC_BXAP_NOR;
377 ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0;
378 ebc0_cs1_bxap_value = EBC_BXAP_NAND;
379 ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1;
380 ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
381 ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
382 break;
383
384 /*-------------------------------------------------------------------*/
385 case BOOT_FROM_8BIT_NAND:
386 /*-------------------------------------------------------------------*/
387 ebc0_cs0_bxap_value = EBC_BXAP_NAND;
388 ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0;
389 ebc0_cs1_bxap_value = EBC_BXAP_NOR;
390 ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
391 ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
392 ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
393 break;
394
395 /*-------------------------------------------------------------------*/
396 default:
397 /*-------------------------------------------------------------------*/
398 /* BOOT_DEVICE_UNKNOWN */
399 break;
400 }
401
Stefan Roesed1c3b272009-09-09 16:25:29 +0200402 mtebc(PB0AP, ebc0_cs0_bxap_value);
403 mtebc(PB0CR, ebc0_cs0_bxcr_value);
404 mtebc(PB1AP, ebc0_cs1_bxap_value);
405 mtebc(PB1CR, ebc0_cs1_bxcr_value);
406 mtebc(PB2AP, ebc0_cs2_bxap_value);
407 mtebc(PB2CR, ebc0_cs2_bxcr_value);
Feng Kan0ce5c862008-07-08 22:48:42 -0700408}
409
410static void early_init_UIC(void)
411{
Stefan Roese1d055472008-07-11 11:34:52 +0200412 /*
413 * Initialise UIC registers. Clear all interrupts. Disable all
414 * interrupts.
415 * Set critical interrupt values. Set interrupt polarities. Set
416 * interrupt trigger levels. Make bit 0 High priority. Clear all
417 * interrupts again.
418 */
Stefan Roese952e7762009-09-24 09:55:50 +0200419 mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
420 mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
421 mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical
Feng Kan0ce5c862008-07-08 22:48:42 -0700422 * interrupts */
Stefan Roese952e7762009-09-24 09:55:50 +0200423 mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
424 mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
425 mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
426 mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */
Feng Kan0ce5c862008-07-08 22:48:42 -0700427
Stefan Roese952e7762009-09-24 09:55:50 +0200428 mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
429 mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
430 mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical
Feng Kan0ce5c862008-07-08 22:48:42 -0700431 * interrupts */
Stefan Roese952e7762009-09-24 09:55:50 +0200432 mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
433 mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
434 mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
435 mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
Feng Kan0ce5c862008-07-08 22:48:42 -0700436
Stefan Roese952e7762009-09-24 09:55:50 +0200437 mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
438 mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
439 mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical
Feng Kan0ce5c862008-07-08 22:48:42 -0700440 * interrupts */
Stefan Roese952e7762009-09-24 09:55:50 +0200441 mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
442 mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */
443 mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
444 mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
Feng Kan0ce5c862008-07-08 22:48:42 -0700445
Stefan Roese952e7762009-09-24 09:55:50 +0200446 mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
447 mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted
Feng Kan0ce5c862008-07-08 22:48:42 -0700448 * cascade to be checked */
Stefan Roese952e7762009-09-24 09:55:50 +0200449 mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical
Feng Kan0ce5c862008-07-08 22:48:42 -0700450 * interrupts */
Stefan Roese952e7762009-09-24 09:55:50 +0200451 mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
452 mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */
453 mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
454 mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
Feng Kan0ce5c862008-07-08 22:48:42 -0700455
456}