blob: ccd9b88adcc68c9a1eb2a3c45fd2b5ddbfb220d1 [file] [log] [blame]
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05001/*
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +00002 * (C) Copyright 2011 CompuLab, Ltd.
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05003 * Mike Rapoport <mike@compulab.co.il>
Igor Grinbergdccd9a02011-04-18 17:48:31 -04004 * Igor Grinberg <grinberg@compulab.co.il>
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05005 *
6 * Based on omap3_beagle.h
7 * (C) Copyright 2006-2008
8 * Texas Instruments.
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Syed Mohammed Khasim <x0khasim@ti.com>
11 *
Igor Grinbergb65a77a2011-04-18 17:55:21 -040012 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050013 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020014 * SPDX-License-Identifier: GPL-2.0+
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050015 */
16
17#ifndef __CONFIG_H
18#define __CONFIG_H
19
20/*
21 * High Level Configuration Options
22 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000023#define CONFIG_OMAP /* in a TI OMAP core */
Marek Vasut308252a2012-07-21 05:02:23 +000024#define CONFIG_OMAP_GPIO
Nikita Kiryanov5b28f202013-10-07 17:28:50 +030025#define CONFIG_CMD_GPIO
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000026#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
Lokesh Vutla806d2792013-07-30 11:36:30 +053027#define CONFIG_OMAP_COMMON
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050028
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050029#define CONFIG_SDRC /* The chip has SDRC controller */
30
31#include <asm/arch/cpu.h> /* get chip and board defs */
32#include <asm/arch/omap3.h>
33
34/*
35 * Display CPU and Board information
36 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000037#define CONFIG_DISPLAY_CPUINFO
38#define CONFIG_DISPLAY_BOARDINFO
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050039
40/* Clock Defines */
41#define V_OSCK 26000000 /* Clock output from T2 */
42#define V_SCLK (V_OSCK >> 1)
43
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050044#define CONFIG_MISC_INIT_R
45
46#define CONFIG_OF_LIBFDT 1
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050047
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000048#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
49#define CONFIG_SETUP_MEMORY_TAGS
50#define CONFIG_INITRD_TAG
51#define CONFIG_REVISION_TAG
Nikita Kiryanov82309252012-01-12 03:26:30 +000052#define CONFIG_SERIAL_TAG
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050053
54/*
55 * Size of malloc() pool
56 */
Igor Grinberg390cdcd2012-05-24 04:01:21 +000057#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000058 /* Sector */
59#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050060
61/*
62 * Hardware drivers
63 */
64
65/*
66 * NS16550 Configuration
67 */
68#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
69
70#define CONFIG_SYS_NS16550
71#define CONFIG_SYS_NS16550_SERIAL
72#define CONFIG_SYS_NS16550_REG_SIZE (-4)
73#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
74
75/*
76 * select serial console configuration
77 */
78#define CONFIG_CONS_INDEX 3
79#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
80#define CONFIG_SERIAL3 3 /* UART3 */
81
82/* allow to overwrite serial and ethaddr */
83#define CONFIG_ENV_OVERWRITE
84#define CONFIG_BAUDRATE 115200
85#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
86 115200}
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000087
88#define CONFIG_GENERIC_MMC
89#define CONFIG_MMC
90#define CONFIG_OMAP_HSMMC
91#define CONFIG_DOS_PARTITION
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050092
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050093/* USB */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000094#define CONFIG_USB_OMAP3
Nikita Kiryanov854a7832012-12-02 13:59:19 +020095#define CONFIG_USB_EHCI
96#define CONFIG_USB_EHCI_OMAP
Nikita Kiryanov854a7832012-12-02 13:59:19 +020097#define CONFIG_USB_STORAGE
98#define CONFIG_MUSB_UDC
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000099#define CONFIG_TWL4030_USB
Nikita Kiryanov854a7832012-12-02 13:59:19 +0200100#define CONFIG_CMD_USB
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500101
102/* USB device configuration */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000103#define CONFIG_USB_DEVICE
104#define CONFIG_USB_TTY
105#define CONFIG_SYS_CONSOLE_IS_IN_ENV
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500106
107/* commands to include */
108#include <config_cmd_default.h>
109
110#define CONFIG_CMD_CACHE
111#define CONFIG_CMD_EXT2 /* EXT2 Support */
112#define CONFIG_CMD_FAT /* FAT support */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500113#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
114#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
Igor Grinberg0b800a62013-04-22 01:06:55 +0000115#define CONFIG_MTD_PARTITIONS
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000116#define MTDIDS_DEFAULT "nand0=nand"
117#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
Igor Grinberg0b800a62013-04-22 01:06:55 +0000118 "1920k(u-boot),256k(u-boot-env),"\
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000119 "4m(kernel),-(fs)"
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500120
121#define CONFIG_CMD_I2C /* I2C serial bus support */
122#define CONFIG_CMD_MMC /* MMC support */
123#define CONFIG_CMD_NAND /* NAND support */
124#define CONFIG_CMD_DHCP
125#define CONFIG_CMD_PING
126
127#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
128#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
129#undef CONFIG_CMD_IMLS /* List all found images */
130
131#define CONFIG_SYS_NO_FLASH
Heiko Schocher6789e842013-10-22 11:03:18 +0200132#define CONFIG_SYS_I2C
133#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
134#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
135#define CONFIG_SYS_I2C_OMAP34XX
Nikita Kiryanov82309252012-01-12 03:26:30 +0000136#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
137#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
Nikita Kiryanov52658fd2014-08-20 15:08:52 +0300138#define CONFIG_SYS_I2C_EEPROM_BUS 0
Nikita Kiryanov79874ae2012-04-02 02:29:31 +0000139#define CONFIG_I2C_MULTI_BUS
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500140
141/*
142 * TWL4030
143 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000144#define CONFIG_TWL4030_POWER
145#define CONFIG_TWL4030_LED
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500146
147/*
148 * Board NAND Info.
149 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000150#define CONFIG_SYS_NAND_QUIET_TEST
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500151#define CONFIG_NAND_OMAP_GPMC
152#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
153 /* to access nand */
154#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
155 /* to access nand at */
156 /* CS0 */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500157#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
158 /* devices */
Stefan Roese7bb6e292014-03-11 17:04:45 +0100159
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500160/* Environment information */
Nikita Kiryanova431be42013-10-07 17:28:49 +0300161#define CONFIG_BOOTDELAY 3
Nikita Kiryanov9bd5c1a2012-12-04 23:28:26 +0000162#define CONFIG_ZERO_BOOTDELAY_CHECK
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500163
164#define CONFIG_EXTRA_ENV_SETTINGS \
165 "loadaddr=0x82000000\0" \
166 "usbtty=cdc_acm\0" \
Nikita Kiryanovf3ef3602013-12-11 18:04:40 +0200167 "console=ttyO2,115200n8\0" \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500168 "mpurate=500\0" \
169 "vram=12M\0" \
170 "dvimode=1024x768MR-16@60\0" \
171 "defaultdisplay=dvi\0" \
172 "mmcdev=0\0" \
173 "mmcroot=/dev/mmcblk0p2 rw\0" \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000174 "mmcrootfstype=ext4 rootwait\0" \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500175 "nandroot=/dev/mtdblock4 rw\0" \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000176 "nandrootfstype=ubifs\0" \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500177 "mmcargs=setenv bootargs console=${console} " \
178 "mpurate=${mpurate} " \
179 "vram=${vram} " \
180 "omapfb.mode=dvi:${dvimode} " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500181 "omapdss.def_disp=${defaultdisplay} " \
182 "root=${mmcroot} " \
183 "rootfstype=${mmcrootfstype}\0" \
184 "nandargs=setenv bootargs console=${console} " \
185 "mpurate=${mpurate} " \
186 "vram=${vram} " \
187 "omapfb.mode=dvi:${dvimode} " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500188 "omapdss.def_disp=${defaultdisplay} " \
189 "root=${nandroot} " \
190 "rootfstype=${nandrootfstype}\0" \
191 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
192 "bootscript=echo Running bootscript from mmc ...; " \
193 "source ${loadaddr}\0" \
194 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
195 "mmcboot=echo Booting from mmc ...; " \
196 "run mmcargs; " \
197 "bootm ${loadaddr}\0" \
198 "nandboot=echo Booting from nand ...; " \
199 "run nandargs; " \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000200 "nand read ${loadaddr} 2a0000 400000; " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500201 "bootm ${loadaddr}\0" \
202
Nikita Kiryanovf3ef3602013-12-11 18:04:40 +0200203#define CONFIG_CMD_BOOTZ
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500204#define CONFIG_BOOTCOMMAND \
Andrew Bradford66968112012-10-01 05:06:52 +0000205 "mmc dev ${mmcdev}; if mmc rescan; then " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500206 "if run loadbootscript; then " \
207 "run bootscript; " \
208 "else " \
209 "if run loaduimage; then " \
210 "run mmcboot; " \
211 "else run nandboot; " \
212 "fi; " \
213 "fi; " \
214 "else run nandboot; fi"
215
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500216/*
217 * Miscellaneous configurable options
218 */
Igor Grinberg41d7e702011-04-18 17:48:28 -0400219#define CONFIG_AUTO_COMPLETE
220#define CONFIG_CMDLINE_EDITING
221#define CONFIG_TIMESTAMP
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000222#define CONFIG_SYS_AUTOLOAD "no"
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500223#define CONFIG_SYS_LONGHELP /* undef to save memory */
224#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
Igor Grinbergb65a77a2011-04-18 17:55:21 -0400225#define CONFIG_SYS_PROMPT "CM-T3x # "
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500226#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
227/* Print Buffer Size */
228#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
229 sizeof(CONFIG_SYS_PROMPT) + 16)
230#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
231/* Boot Argument Buffer Size */
232#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
233
234#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
235 /* works on */
236#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
237 0x01F00000) /* 31MB */
238
239#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
240 /* load address */
241
242/*
243 * OMAP3 has 12 GP timers, they can be driven by the system clock
244 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
245 * This rate is divided by a local divisor.
246 */
247#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
248#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500249
250/*-----------------------------------------------------------------------
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500251 * Physical Memory Map
252 */
253#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */
254#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500255
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500256/*-----------------------------------------------------------------------
257 * FLASH and environment organization
258 */
259
260/* **** PISMO SUPPORT *** */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500261/* Monitor at start of flash */
262#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
Igor Grinberg3530a352012-10-07 01:17:34 +0000263#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500264
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000265#define CONFIG_ENV_IS_IN_NAND
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500266#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
Luca Ceresoli6cbec7b2011-04-20 11:02:05 -0400267#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500268#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
269
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500270#if defined(CONFIG_CMD_NET)
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500271#define CONFIG_SMC911X
272#define CONFIG_SMC911X_32_BIT
Igor Grinbergb65a77a2011-04-18 17:55:21 -0400273#define CM_T3X_SMC911X_BASE 0x2C000000
274#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20))
275#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500276#endif /* (CONFIG_CMD_NET) */
277
278/* additions for new relocation code, must be added to all boards */
279#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
280#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
281#define CONFIG_SYS_INIT_RAM_SIZE 0x800
282#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
283 CONFIG_SYS_INIT_RAM_SIZE - \
284 GENERATED_GBL_DATA_SIZE)
285
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400286/* Status LED */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000287#define CONFIG_STATUS_LED /* Status LED enabled */
288#define CONFIG_BOARD_SPECIFIC_LED
Igor Grinbergebc18af2013-11-06 16:39:47 +0200289#define CONFIG_GPIO_LED
290#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
291#define GREEN_LED_DEV 0
292#define STATUS_LED_BIT GREEN_LED_GPIO
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400293#define STATUS_LED_STATE STATUS_LED_ON
294#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
Igor Grinbergebc18af2013-11-06 16:39:47 +0200295#define STATUS_LED_BOOT GREEN_LED_DEV
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400296
Nikita Kiryanov60e6bdc2013-02-24 06:19:23 +0000297#define CONFIG_SPLASHIMAGE_GUARD
298
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400299/* GPIO banks */
300#ifdef CONFIG_STATUS_LED
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000301#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400302#endif
303
Nikita Kiryanov7878ca52013-01-30 21:39:58 +0000304/* Display Configuration */
305#define CONFIG_OMAP3_GPIO_2
Nikita Kiryanov6f728922013-12-31 12:55:15 +0200306#define CONFIG_OMAP3_GPIO_5
Nikita Kiryanov7878ca52013-01-30 21:39:58 +0000307#define CONFIG_VIDEO_OMAP3
308#define LCD_BPP LCD_COLOR16
309
310#define CONFIG_LCD
Nikita Kiryanovf35034f2012-12-22 21:03:48 +0000311#define CONFIG_SPLASH_SCREEN
312#define CONFIG_CMD_BMP
313#define CONFIG_BMP_16BPP
Nikita Kiryanov63c4f172013-10-16 17:23:29 +0300314#define CONFIG_SCF0403_LCD
315
316#define CONFIG_OMAP3_SPI
Nikita Kiryanov7878ca52013-01-30 21:39:58 +0000317
Stefan Roese3e51b7c2013-12-04 13:54:18 +0100318/* Defines for SPL */
Stefan Roese3e51b7c2013-12-04 13:54:18 +0100319#define CONFIG_SPL_FRAMEWORK
320#define CONFIG_SPL_NAND_SIMPLE
321
322#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
323#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
Paul Kocialkowskie2ccdf82014-11-08 23:14:55 +0100324#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Guillaume GARDET205b4f32014-10-15 17:53:11 +0200325#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
Stefan Roese3e51b7c2013-12-04 13:54:18 +0100326
327#define CONFIG_SPL_BOARD_INIT
328#define CONFIG_SPL_LIBCOMMON_SUPPORT
329#define CONFIG_SPL_LIBDISK_SUPPORT
330#define CONFIG_SPL_I2C_SUPPORT
331#define CONFIG_SPL_LIBGENERIC_SUPPORT
332#define CONFIG_SPL_MMC_SUPPORT
333#define CONFIG_SPL_FAT_SUPPORT
334#define CONFIG_SPL_SERIAL_SUPPORT
335#define CONFIG_SPL_NAND_SUPPORT
336#define CONFIG_SPL_NAND_BASE
337#define CONFIG_SPL_NAND_DRIVERS
338#define CONFIG_SPL_NAND_ECC
339#define CONFIG_SPL_GPIO_SUPPORT
340#define CONFIG_SPL_POWER_SUPPORT
341#define CONFIG_SPL_OMAP3_ID_NAND
342#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
343
344/* NAND boot config */
345#define CONFIG_SYS_NAND_5_ADDR_CYCLE
346#define CONFIG_SYS_NAND_PAGE_COUNT 64
347#define CONFIG_SYS_NAND_PAGE_SIZE 2048
348#define CONFIG_SYS_NAND_OOBSIZE 64
349#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
350#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
351/*
352 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
353 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
354 */
355#define CONFIG_SYS_NAND_ECCPOS { 1, 2, 3, 4, 5, 6, 7, 8, 9, \
356 10, 11, 12 }
357#define CONFIG_SYS_NAND_ECCSIZE 512
358#define CONFIG_SYS_NAND_ECCBYTES 3
359#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
360
361#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
362#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
363
364#define CONFIG_SPL_TEXT_BASE 0x40200800
365#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
366#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
367
368/*
369 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
370 * older x-loader implementations. And move the BSS area so that it
371 * doesn't overlap with TEXT_BASE.
372 */
373#define CONFIG_SYS_TEXT_BASE 0x80008000
374#define CONFIG_SPL_BSS_START_ADDR 0x80100000
375#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
376
377#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
378#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
379
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500380#endif /* __CONFIG_H */