blob: fdcd7d3e9ae9b9b91ee615c72313264225c9edc4 [file] [log] [blame]
Ley Foon Tan380477f2019-11-27 15:55:31 +08001/* SPDX-License-Identifier: GPL-2.0
2 *
3 * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
4 *
5 */
6
7#ifndef __CONFIG_SOCFPGA_SOC64_COMMON_H__
8#define __CONFIG_SOCFPGA_SOC64_COMMON_H__
9
10#include <asm/arch/base_addr_s10.h>
11#include <asm/arch/handoff_s10.h>
Simon Glass1af3c7f2020-05-10 11:40:09 -060012#include <linux/stringify.h>
Ley Foon Tan380477f2019-11-27 15:55:31 +080013
14/*
15 * U-Boot general configurations
16 */
17#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
18#define CONFIG_LOADADDR 0x2000000
19#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
20#define CONFIG_REMAKE_ELF
21/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
22#define CPU_RELEASE_ADDR 0xFFD12210
23#define CONFIG_SYS_CACHELINE_SIZE 64
24#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */
25
26/*
27 * U-Boot console configurations
28 */
29#define CONFIG_SYS_MAXARGS 64
30#define CONFIG_SYS_CBSIZE 2048
31#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
32 sizeof(CONFIG_SYS_PROMPT) + 16)
33#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
34
35/* Extend size of kernel image for uncompression */
36#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
37
38/*
39 * U-Boot run time memory configurations
40 */
41#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
42#define CONFIG_SYS_INIT_RAM_SIZE 0x40000
Chee Hong Ang482bc182020-12-24 18:21:09 +080043#ifdef CONFIG_SPL_BUILD
Ley Foon Tan380477f2019-11-27 15:55:31 +080044#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \
45 + CONFIG_SYS_INIT_RAM_SIZE \
46 - S10_HANDOFF_SIZE)
Chee Hong Ang482bc182020-12-24 18:21:09 +080047#else
48#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE \
49 + 0x100000)
50#endif
Ley Foon Tan380477f2019-11-27 15:55:31 +080051#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR)
52#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
53
54/*
55 * U-Boot environment configurations
56 */
Ley Foon Tan380477f2019-11-27 15:55:31 +080057
58/*
59 * QSPI support
60 */
61 #ifdef CONFIG_CADENCE_QSPI
62/* Enable it if you want to use dual-stacked mode */
63/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/
64
65/* Flash device info */
66
67/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/
68
69#ifndef CONFIG_SPL_BUILD
Ley Foon Tan380477f2019-11-27 15:55:31 +080070#define CONFIG_MTD_PARTITIONS
71#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
72#endif /* CONFIG_SPL_BUILD */
73
74#ifndef __ASSEMBLY__
75unsigned int cm_get_qspi_controller_clk_hz(void);
76#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
77#endif
78
79#endif /* CONFIG_CADENCE_QSPI */
80
81/*
82 * Boot arguments passed to the boot command. The value of
83 * CONFIG_BOOTARGS goes into the environment value "bootargs".
84 * Do note the value will override also the chosen node in FDT blob.
85 */
Chee Hong Ang200846f2020-12-24 18:20:57 +080086
87#ifdef CONFIG_FIT
88#define CONFIG_BOOTFILE "kernel.itb"
89#define CONFIG_BOOTCOMMAND "run fatscript; run mmcfitload;run linux_qspi_enable;" \
90 "run mmcfitboot"
91#else
92#define CONFIG_BOOTFILE "Image"
Ley Foon Tan380477f2019-11-27 15:55:31 +080093#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \
94 "run mmcboot"
Chee Hong Ang200846f2020-12-24 18:20:57 +080095#endif
Ley Foon Tan380477f2019-11-27 15:55:31 +080096
97#define CONFIG_EXTRA_ENV_SETTINGS \
98 "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
Chee Hong Ang200846f2020-12-24 18:20:57 +080099 "bootfile=" CONFIG_BOOTFILE "\0" \
Ley Foon Tan380477f2019-11-27 15:55:31 +0800100 "fdt_addr=8000000\0" \
Ley Foon Tana76b7112019-11-27 15:55:32 +0800101 "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
Ley Foon Tan380477f2019-11-27 15:55:31 +0800102 "mmcroot=/dev/mmcblk0p2\0" \
103 "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
104 " root=${mmcroot} rw rootwait;" \
105 "booti ${loadaddr} - ${fdt_addr}\0" \
106 "mmcload=mmc rescan;" \
107 "load mmc 0:1 ${loadaddr} ${bootfile};" \
108 "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
Chee Hong Ang200846f2020-12-24 18:20:57 +0800109 "mmcfitboot=setenv bootargs " CONFIG_BOOTARGS \
110 " root=${mmcroot} rw rootwait;" \
111 "bootm ${loadaddr}\0" \
112 "mmcfitload=mmc rescan;" \
113 "load mmc 0:1 ${loadaddr} ${bootfile}\0" \
Ley Foon Tan380477f2019-11-27 15:55:31 +0800114 "linux_qspi_enable=if sf probe; then " \
115 "echo Enabling QSPI at Linux DTB...;" \
116 "fdt addr ${fdt_addr}; fdt resize;" \
117 "fdt set /soc/spi@ff8d2000 status okay;" \
118 "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \
119 " ${qspi_clock}; fi; \0" \
120 "scriptaddr=0x02100000\0" \
121 "scriptfile=u-boot.scr\0" \
122 "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
123 "then source ${scriptaddr}; fi\0" \
124 "socfpga_legacy_reset_compat=1\0"
125
126/*
127 * Generic Interrupt Controller Definitions
128 */
129#define CONFIG_GICV2
130
131/*
132 * External memory configurations
133 */
134#define PHYS_SDRAM_1 0x0
135#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024)
136#define CONFIG_SYS_SDRAM_BASE 0
Ley Foon Tan380477f2019-11-27 15:55:31 +0800137
138/*
139 * Serial / UART configurations
140 */
141#define CONFIG_SYS_NS16550_CLK 100000000
142#define CONFIG_SYS_NS16550_MEM32
143
144/*
145 * Timer & watchdog configurations
146 */
147#define COUNTER_FREQUENCY 400000000
148
149/*
150 * SDMMC configurations
151 */
152#ifdef CONFIG_CMD_MMC
153#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
154#endif
155/*
156 * Flash configurations
157 */
158#define CONFIG_SYS_MAX_FLASH_BANKS 1
159
160/* Ethernet on SoC (EMAC) */
161#if defined(CONFIG_CMD_NET)
162#define CONFIG_DW_ALTDESCRIPTOR
163#endif /* CONFIG_CMD_NET */
164
165/*
166 * L4 Watchdog
167 */
Marek Vasutcf8c8362019-06-27 01:19:23 +0200168#ifndef CONFIG_SPL_BUILD
Marek Vasut8941f842019-06-27 00:26:34 +0200169#undef CONFIG_HW_WATCHDOG
170#undef CONFIG_DESIGNWARE_WATCHDOG
171#endif
Ley Foon Tan380477f2019-11-27 15:55:31 +0800172#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
Ley Foon Tana76b7112019-11-27 15:55:32 +0800173#ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
Ley Foon Tan380477f2019-11-27 15:55:31 +0800174#ifndef __ASSEMBLY__
175unsigned int cm_get_l4_sys_free_clk_hz(void);
176#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000)
177#endif
Ley Foon Tana76b7112019-11-27 15:55:32 +0800178#else
179#define CONFIG_DW_WDT_CLOCK_KHZ 100000
180#endif
Ley Foon Tan380477f2019-11-27 15:55:31 +0800181
182/*
183 * SPL memory layout
184 *
185 * On chip RAM
186 * 0xFFE0_0000 ...... Start of OCRAM
187 * SPL code, rwdata
188 * empty space
189 * 0xFFEx_xxxx ...... Top of stack (grows down)
190 * 0xFFEy_yyyy ...... Global Data
191 * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN)
192 * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB)
193 * 0xFFE3_FFFF ...... End of OCRAM
194 *
195 * SDRAM
196 * 0x0000_0000 ...... Start of SDRAM_1
197 * unused / empty space for image loading
198 * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE)
199 * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE)
200 * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
201 *
202 */
203#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex"
204#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
205#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
206#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
207#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \
208 - CONFIG_SPL_BSS_MAX_SIZE)
209#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN)
210#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \
211 - CONFIG_SYS_SPL_MALLOC_SIZE)
212
213/* SPL SDMMC boot support */
Chee Hong Ang200846f2020-12-24 18:20:57 +0800214#ifdef CONFIG_SPL_LOAD_FIT
215#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
216#else
Ley Foon Tan380477f2019-11-27 15:55:31 +0800217#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
Chee Hong Ang200846f2020-12-24 18:20:57 +0800218#endif
Ley Foon Tan380477f2019-11-27 15:55:31 +0800219
220#endif /* __CONFIG_SOCFPGA_SOC64_COMMON_H__ */