blob: 3b2be2c2fa642dc91c8511f07b9960624f10f5b3 [file] [log] [blame]
Hung-ying Tyan88364382013-05-15 18:27:28 +08001/*
2 * Chromium OS cros_ec driver
3 *
4 * Copyright (c) 2012 The Chromium OS Authors.
Hung-ying Tyan88364382013-05-15 18:27:28 +08005 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Hung-ying Tyan88364382013-05-15 18:27:28 +08007 */
8
9#ifndef _CROS_EC_H
10#define _CROS_EC_H
11
12#include <linux/compiler.h>
13#include <ec_commands.h>
14#include <fdtdec.h>
15#include <cros_ec_message.h>
Simon Glass32f8a192015-01-05 20:05:32 -070016#include <asm/gpio.h>
Hung-ying Tyan88364382013-05-15 18:27:28 +080017
Hung-ying Tyan88364382013-05-15 18:27:28 +080018/* Our configuration information */
19struct cros_ec_dev {
Simon Glass84d6cbd2014-10-13 23:42:14 -060020 struct udevice *dev; /* Transport device */
Simon Glass32f8a192015-01-05 20:05:32 -070021 struct gpio_desc ec_int; /* GPIO used as EC interrupt line */
Randall Spanglere8c12662014-02-27 13:26:08 -070022 int protocol_version; /* Protocol version to use */
Hung-ying Tyan88364382013-05-15 18:27:28 +080023 int optimise_flash_write; /* Don't write erased flash blocks */
24
25 /*
26 * These two buffers will always be dword-aligned and include enough
27 * space for up to 7 word-alignment bytes also, so we can ensure that
28 * the body of the message is always dword-aligned (64-bit).
29 *
30 * We use this alignment to keep ARM and x86 happy. Probably word
31 * alignment would be OK, there might be a small performance advantage
32 * to using dword.
33 */
34 uint8_t din[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
35 __aligned(sizeof(int64_t));
36 uint8_t dout[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
37 __aligned(sizeof(int64_t));
38};
39
40/*
41 * Hard-code the number of columns we happen to know we have right now. It
42 * would be more correct to call cros_ec_info() at startup and determine the
43 * actual number of keyboard cols from there.
44 */
45#define CROS_EC_KEYSCAN_COLS 13
46
47/* Information returned by a key scan */
48struct mbkp_keyscan {
49 uint8_t data[CROS_EC_KEYSCAN_COLS];
50};
51
Simon Glassd7f25f32014-02-27 13:26:03 -070052/* Holds information about the Chrome EC */
53struct fdt_cros_ec {
54 struct fmap_entry flash; /* Address and size of EC flash */
55 /*
56 * Byte value of erased flash, or -1 if not known. It is normally
57 * 0xff but some flash devices use 0 (e.g. STM32Lxxx)
58 */
59 int flash_erase_value;
60 struct fmap_entry region[EC_FLASH_REGION_COUNT];
61};
62
Hung-ying Tyan88364382013-05-15 18:27:28 +080063/**
64 * Read the ID of the CROS-EC device
65 *
66 * The ID is a string identifying the CROS-EC device.
67 *
68 * @param dev CROS-EC device
69 * @param id Place to put the ID
70 * @param maxlen Maximum length of the ID field
71 * @return 0 if ok, -1 on error
72 */
73int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen);
74
75/**
76 * Read a keyboard scan from the CROS-EC device
77 *
78 * Send a message requesting a keyboard scan and return the result
79 *
80 * @param dev CROS-EC device
81 * @param scan Place to put the scan results
82 * @return 0 if ok, -1 on error
83 */
84int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan);
85
86/**
87 * Read which image is currently running on the CROS-EC device.
88 *
89 * @param dev CROS-EC device
90 * @param image Destination for image identifier
91 * @return 0 if ok, <0 on error
92 */
93int cros_ec_read_current_image(struct cros_ec_dev *dev,
94 enum ec_current_image *image);
95
96/**
97 * Read the hash of the CROS-EC device firmware.
98 *
99 * @param dev CROS-EC device
100 * @param hash Destination for hash information
101 * @return 0 if ok, <0 on error
102 */
103int cros_ec_read_hash(struct cros_ec_dev *dev,
104 struct ec_response_vboot_hash *hash);
105
106/**
107 * Send a reboot command to the CROS-EC device.
108 *
109 * Note that some reboot commands (such as EC_REBOOT_COLD) also reboot the AP.
110 *
111 * @param dev CROS-EC device
112 * @param cmd Reboot command
113 * @param flags Flags for reboot command (EC_REBOOT_FLAG_*)
114 * @return 0 if ok, <0 on error
115 */
116int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
117 uint8_t flags);
118
119/**
120 * Check if the CROS-EC device has an interrupt pending.
121 *
122 * Read the status of the external interrupt connected to the CROS-EC device.
123 * If no external interrupt is configured, this always returns 1.
124 *
125 * @param dev CROS-EC device
126 * @return 0 if no interrupt is pending
127 */
128int cros_ec_interrupt_pending(struct cros_ec_dev *dev);
129
130enum {
131 CROS_EC_OK,
132 CROS_EC_ERR = 1,
133 CROS_EC_ERR_FDT_DECODE,
134 CROS_EC_ERR_CHECK_VERSION,
135 CROS_EC_ERR_READ_ID,
136 CROS_EC_ERR_DEV_INIT,
137};
138
139/**
Simon Glass836bb6e2014-02-27 13:26:07 -0700140 * Initialise the Chromium OS EC driver
Hung-ying Tyan88364382013-05-15 18:27:28 +0800141 *
142 * @param blob Device tree blob containing setup information
143 * @param cros_ecp Returns pointer to the cros_ec device, or NULL if none
144 * @return 0 if we got an cros_ec device and all is well (or no cros_ec is
145 * expected), -ve if we should have an cros_ec device but failed to find
146 * one, or init failed (-CROS_EC_ERR_...).
147 */
148int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp);
149
150/**
151 * Read information about the keyboard matrix
152 *
153 * @param dev CROS-EC device
154 * @param info Place to put the info structure
155 */
156int cros_ec_info(struct cros_ec_dev *dev,
Simon Glass836bb6e2014-02-27 13:26:07 -0700157 struct ec_response_mkbp_info *info);
Hung-ying Tyan88364382013-05-15 18:27:28 +0800158
159/**
160 * Read the host event flags
161 *
162 * @param dev CROS-EC device
163 * @param events_ptr Destination for event flags. Not changed on error.
164 * @return 0 if ok, <0 on error
165 */
166int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr);
167
168/**
169 * Clear the specified host event flags
170 *
171 * @param dev CROS-EC device
172 * @param events Event flags to clear
173 * @return 0 if ok, <0 on error
174 */
175int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events);
176
177/**
178 * Get/set flash protection
179 *
180 * @param dev CROS-EC device
181 * @param set_mask Mask of flags to set; if 0, just retrieves existing
182 * protection state without changing it.
183 * @param set_flags New flag values; only bits in set_mask are applied;
184 * ignored if set_mask=0.
185 * @param prot Destination for updated protection state from EC.
186 * @return 0 if ok, <0 on error
187 */
188int cros_ec_flash_protect(struct cros_ec_dev *dev,
189 uint32_t set_mask, uint32_t set_flags,
190 struct ec_response_flash_protect *resp);
191
192
193/**
194 * Run internal tests on the cros_ec interface.
195 *
196 * @param dev CROS-EC device
197 * @return 0 if ok, <0 if the test failed
198 */
199int cros_ec_test(struct cros_ec_dev *dev);
200
201/**
202 * Update the EC RW copy.
203 *
204 * @param dev CROS-EC device
205 * @param image the content to write
206 * @param imafge_size content length
207 * @return 0 if ok, <0 if the test failed
208 */
209int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
210 const uint8_t *image, int image_size);
211
212/**
213 * Return a pointer to the board's CROS-EC device
214 *
215 * This should be implemented by board files.
216 *
217 * @return pointer to CROS-EC device, or NULL if none is available
218 */
219struct cros_ec_dev *board_get_cros_ec_dev(void);
220
Simon Glass84d6cbd2014-10-13 23:42:14 -0600221struct dm_cros_ec_ops {
222 int (*check_version)(struct udevice *dev);
223 int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version,
224 const uint8_t *dout, int dout_len,
225 uint8_t **dinp, int din_len);
226 int (*packet)(struct udevice *dev, int out_bytes, int in_bytes);
227};
228
229#define dm_cros_ec_get_ops(dev) \
230 ((struct dm_cros_ec_ops *)(dev)->driver->ops)
231
232int cros_ec_register(struct udevice *dev);
233
Randall Spanglera6070282014-02-27 13:26:10 -0700234/**
Hung-ying Tyan88364382013-05-15 18:27:28 +0800235 * Dump a block of data for a command.
236 *
237 * @param name Name for data (e.g. 'in', 'out')
238 * @param cmd Command number associated with data, or -1 for none
239 * @param data Data block to dump
240 * @param len Length of data block to dump
241 */
242void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len);
243
244/**
245 * Calculate a simple 8-bit checksum of a data block
246 *
247 * @param data Data block to checksum
248 * @param size Size of data block in bytes
249 * @return checksum value (0 to 255)
250 */
251int cros_ec_calc_checksum(const uint8_t *data, int size);
252
253/**
254 * Decode a flash region parameter
255 *
256 * @param argc Number of params remaining
257 * @param argv List of remaining parameters
258 * @return flash region (EC_FLASH_REGION_...) or -1 on error
259 */
260int cros_ec_decode_region(int argc, char * const argv[]);
261
262int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset,
263 uint32_t size);
264
265/**
266 * Read data from the flash
267 *
268 * Read an arbitrary amount of data from the EC flash, by repeatedly reading
269 * small blocks.
270 *
271 * The offset starts at 0. You can obtain the region information from
272 * cros_ec_flash_offset() to find out where to read for a particular region.
273 *
274 * @param dev CROS-EC device
275 * @param data Pointer to data buffer to read into
276 * @param offset Offset within flash to read from
277 * @param size Number of bytes to read
278 * @return 0 if ok, -1 on error
279 */
280int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
281 uint32_t size);
282
283/**
284 * Write data to the flash
285 *
286 * Write an arbitrary amount of data to the EC flash, by repeatedly writing
287 * small blocks.
288 *
289 * The offset starts at 0. You can obtain the region information from
290 * cros_ec_flash_offset() to find out where to write for a particular region.
291 *
292 * Attempting to write to the region where the EC is currently running from
293 * will result in an error.
294 *
295 * @param dev CROS-EC device
296 * @param data Pointer to data buffer to write
297 * @param offset Offset within flash to write to.
298 * @param size Number of bytes to write
299 * @return 0 if ok, -1 on error
300 */
301int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
302 uint32_t offset, uint32_t size);
303
304/**
305 * Obtain position and size of a flash region
306 *
307 * @param dev CROS-EC device
308 * @param region Flash region to query
309 * @param offset Returns offset of flash region in EC flash
310 * @param size Returns size of flash region
311 * @return 0 if ok, -1 on error
312 */
313int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
314 uint32_t *offset, uint32_t *size);
315
316/**
317 * Read/write VbNvContext from/to a CROS-EC device.
318 *
319 * @param dev CROS-EC device
320 * @param block Buffer of VbNvContext to be read/write
321 * @return 0 if ok, -1 on error
322 */
323int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block);
324int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block);
325
326/**
327 * Read the version information for the EC images
328 *
329 * @param dev CROS-EC device
330 * @param versionp This is set to point to the version information
331 * @return 0 if ok, -1 on error
332 */
333int cros_ec_read_version(struct cros_ec_dev *dev,
334 struct ec_response_get_version **versionp);
335
336/**
337 * Read the build information for the EC
338 *
339 * @param dev CROS-EC device
340 * @param versionp This is set to point to the build string
341 * @return 0 if ok, -1 on error
342 */
343int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
344
345/**
346 * Switch on/off a LDO / FET.
347 *
348 * @param dev CROS-EC device
349 * @param index index of the LDO/FET to switch
350 * @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF
351 * @return 0 if ok, -1 on error
352 */
353int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
354
355/**
356 * Read back a LDO / FET current state.
357 *
358 * @param dev CROS-EC device
359 * @param index index of the LDO/FET to switch
360 * @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF
361 * @return 0 if ok, -1 on error
362 */
363int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
Vadim Bendebury41364f02014-02-27 13:26:02 -0700364
365/**
Vadim Bendebury41364f02014-02-27 13:26:02 -0700366 * Get access to the error reported when cros_ec_board_init() was called
367 *
368 * This permits delayed reporting of the EC error if it failed during
369 * early init.
370 *
371 * @return error (0 if there was no error, -ve if there was an error)
372 */
373int cros_ec_get_error(void);
374
Simon Glassd7f25f32014-02-27 13:26:03 -0700375/**
376 * Returns information from the FDT about the Chrome EC flash
377 *
378 * @param blob FDT blob to use
Simon Glass84d6cbd2014-10-13 23:42:14 -0600379 * @param node Node offset to read from
Simon Glassd7f25f32014-02-27 13:26:03 -0700380 * @param config Structure to use to return information
381 */
Simon Glass84d6cbd2014-10-13 23:42:14 -0600382int cros_ec_decode_ec_flash(const void *blob, int node,
383 struct fdt_cros_ec *config);
Simon Glassd7f25f32014-02-27 13:26:03 -0700384
Simon Glassdf93d902014-02-27 13:26:12 -0700385/**
386 * Check the current keyboard state, in case recovery mode is requested.
387 * This function is for sandbox only.
388 *
389 * @param ec CROS-EC device
390 */
391void cros_ec_check_keyboard(struct cros_ec_dev *dev);
392
Simon Glassb2a668b2014-02-27 13:26:14 -0700393/*
394 * Tunnel an I2C transfer to the EC
395 *
396 * @param dev CROS-EC device
397 * @param chip Chip address (7-bit I2C address)
398 * @param addr Register address to read/write
399 * @param alen Length of register address in bytes
400 * @param buffer Buffer containing data to read/write
401 * @param len Length of buffer
402 * @param is_read 1 if this is a read, 0 if this is a write
403 */
404int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
405 int alen, uchar *buffer, int len, int is_read);
406
Hung-ying Tyan88364382013-05-15 18:27:28 +0800407#endif