blob: 37eb481ff16d534d0009b5d06010deb2a0d93e9d [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <malloc.h>
26#include <commproc.h>
27#include <net.h>
28#include <command.h>
29
Wolfgang Denkd87080b2006-03-31 18:32:53 +020030DECLARE_GLOBAL_DATA_PTR;
31
wdenkc6097192002-11-03 00:24:07 +000032#undef ET_DEBUG
33
Jon Loeliger44312832007-07-09 19:06:00 -050034#if defined(CONFIG_CMD_NET) && \
wdenka6ab4bf2004-04-15 21:31:56 +000035 (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
36
37/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
38#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
39#define CONFIG_ETHER_ON_FEC1 1
40#endif
41
42/* define WANT_MII when MII support is required */
43#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
44#define WANT_MII
45#else
46#undef WANT_MII
47#endif
48
49#if defined(WANT_MII)
50#include <miiphy.h>
Marian Balakowicz63ff0042005-10-28 22:30:33 +020051
Jon Loeliger44312832007-07-09 19:06:00 -050052#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
Marian Balakowicz63ff0042005-10-28 22:30:33 +020053#error "CONFIG_MII has to be defined!"
54#endif
55
wdenka6ab4bf2004-04-15 21:31:56 +000056#endif
57
58#if defined(CONFIG_RMII) && !defined(WANT_MII)
59#error RMII support is unusable without a working PHY.
60#endif
wdenkc6097192002-11-03 00:24:07 +000061
62#ifdef CFG_DISCOVER_PHY
wdenka6ab4bf2004-04-15 21:31:56 +000063static int mii_discover_phy(struct eth_device *dev);
wdenkc6097192002-11-03 00:24:07 +000064#endif
65
Marian Balakowicz63ff0042005-10-28 22:30:33 +020066int fec8xx_miiphy_read(char *devname, unsigned char addr,
67 unsigned char reg, unsigned short *value);
68int fec8xx_miiphy_write(char *devname, unsigned char addr,
69 unsigned char reg, unsigned short value);
70
wdenka6ab4bf2004-04-15 21:31:56 +000071static struct ether_fcc_info_s
72{
73 int ether_index;
74 int fecp_offset;
wdenka6ab4bf2004-04-15 21:31:56 +000075 int phy_addr;
76 int actual_phy_addr;
wdenkc26e4542004-04-18 10:13:26 +000077 int initialized;
wdenka6ab4bf2004-04-15 21:31:56 +000078}
79 ether_fcc_info[] = {
80#if defined(CONFIG_ETHER_ON_FEC1)
81 {
82 0,
83 offsetof(immap_t, im_cpm.cp_fec1),
wdenka6ab4bf2004-04-15 21:31:56 +000084#if defined(CONFIG_FEC1_PHY)
85 CONFIG_FEC1_PHY,
86#else
87 -1, /* discover */
88#endif
89 -1,
wdenkc26e4542004-04-18 10:13:26 +000090 0,
wdenka6ab4bf2004-04-15 21:31:56 +000091
92 },
93#endif
94#if defined(CONFIG_ETHER_ON_FEC2)
95 {
96 1,
97 offsetof(immap_t, im_cpm.cp_fec2),
wdenka6ab4bf2004-04-15 21:31:56 +000098#if defined(CONFIG_FEC2_PHY)
99 CONFIG_FEC2_PHY,
100#else
101 -1,
102#endif
103 -1,
wdenkc26e4542004-04-18 10:13:26 +0000104 0,
wdenka6ab4bf2004-04-15 21:31:56 +0000105 },
106#endif
107};
108
wdenkc6097192002-11-03 00:24:07 +0000109/* Ethernet Transmit and Receive Buffers */
110#define DBUF_LENGTH 1520
111
112#define TX_BUF_CNT 2
113
114#define TOUT_LOOP 100
115
116#define PKT_MAXBUF_SIZE 1518
117#define PKT_MINBUF_SIZE 64
118#define PKT_MAXBLR_SIZE 1520
119
wdenka6ab4bf2004-04-15 21:31:56 +0000120#ifdef __GNUC__
121static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
122#else
123#error txbuf must be aligned.
124#endif
wdenkc6097192002-11-03 00:24:07 +0000125
126static uint rxIdx; /* index of the current RX buffer */
127static uint txIdx; /* index of the current TX buffer */
128
129/*
130 * FEC Ethernet Tx and Rx buffer descriptors allocated at the
131 * immr->udata_bd address on Dual-Port RAM
132 * Provide for Double Buffering
133 */
134
135typedef volatile struct CommonBufferDescriptor {
136 cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
137 cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
138} RTXBD;
139
140static RTXBD *rtx = NULL;
141
142static int fec_send(struct eth_device* dev, volatile void *packet, int length);
143static int fec_recv(struct eth_device* dev);
144static int fec_init(struct eth_device* dev, bd_t * bd);
145static void fec_halt(struct eth_device* dev);
Wolfgang Denk08e99e12008-01-13 02:19:13 +0100146#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100147static void __mii_init(void);
Wolfgang Denk08e99e12008-01-13 02:19:13 +0100148#endif
wdenkc6097192002-11-03 00:24:07 +0000149
150int fec_initialize(bd_t *bis)
151{
152 struct eth_device* dev;
wdenka6ab4bf2004-04-15 21:31:56 +0000153 struct ether_fcc_info_s *efis;
154 int i;
wdenkc6097192002-11-03 00:24:07 +0000155
wdenka6ab4bf2004-04-15 21:31:56 +0000156 for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) {
wdenkc6097192002-11-03 00:24:07 +0000157
wdenka6ab4bf2004-04-15 21:31:56 +0000158 dev = malloc(sizeof(*dev));
159 if (dev == NULL)
160 hang();
wdenkc6097192002-11-03 00:24:07 +0000161
wdenka6ab4bf2004-04-15 21:31:56 +0000162 memset(dev, 0, sizeof(*dev));
wdenkc6097192002-11-03 00:24:07 +0000163
wdenka6ab4bf2004-04-15 21:31:56 +0000164 /* for FEC1 make sure that the name of the interface is the same
165 as the old one for compatibility reasons */
166 if (i == 0) {
167 sprintf (dev->name, "FEC ETHERNET");
168 } else {
169 sprintf (dev->name, "FEC%d ETHERNET",
170 ether_fcc_info[i].ether_index + 1);
171 }
172
173 efis = &ether_fcc_info[i];
174
175 /*
176 * reset actual phy addr
177 */
178 efis->actual_phy_addr = -1;
179
180 dev->priv = efis;
181 dev->init = fec_init;
182 dev->halt = fec_halt;
183 dev->send = fec_send;
184 dev->recv = fec_recv;
185
186 eth_register(dev);
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200187
Jon Loeliger44312832007-07-09 19:06:00 -0500188#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200189 miiphy_register(dev->name,
190 fec8xx_miiphy_read, fec8xx_miiphy_write);
191#endif
wdenka6ab4bf2004-04-15 21:31:56 +0000192 }
wdenkc6097192002-11-03 00:24:07 +0000193 return 1;
194}
195
196static int fec_send(struct eth_device* dev, volatile void *packet, int length)
197{
198 int j, rc;
wdenka6ab4bf2004-04-15 21:31:56 +0000199 struct ether_fcc_info_s *efis = dev->priv;
200 volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
wdenkc6097192002-11-03 00:24:07 +0000201
202 /* section 16.9.23.3
203 * Wait for ready
204 */
205 j = 0;
206 while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
207 udelay(1);
208 j++;
209 }
210 if (j>=TOUT_LOOP) {
211 printf("TX not ready\n");
212 }
213
214 rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
215 rtx->txbd[txIdx].cbd_datlen = length;
216 rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
217 __asm__ ("eieio");
218
219 /* Activate transmit Buffer Descriptor polling */
220 fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
221
222 j = 0;
223 while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
224#if defined(CONFIG_ICU862)
225 udelay(10);
226#else
227 udelay(1);
228#endif
229 j++;
230 }
231 if (j>=TOUT_LOOP) {
232 printf("TX timeout\n");
233 }
234#ifdef ET_DEBUG
235 printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
236 __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
237 (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
238#endif
239 /* return only status bits */;
240 rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
241
242 txIdx = (txIdx + 1) % TX_BUF_CNT;
243
244 return rc;
245}
246
wdenka6ab4bf2004-04-15 21:31:56 +0000247static int fec_recv (struct eth_device *dev)
wdenkc6097192002-11-03 00:24:07 +0000248{
wdenka6ab4bf2004-04-15 21:31:56 +0000249 struct ether_fcc_info_s *efis = dev->priv;
250 volatile fec_t *fecp =
251 (volatile fec_t *) (CFG_IMMR + efis->fecp_offset);
wdenkc6097192002-11-03 00:24:07 +0000252 int length;
wdenkc6097192002-11-03 00:24:07 +0000253
wdenka6ab4bf2004-04-15 21:31:56 +0000254 for (;;) {
255 /* section 16.9.23.2 */
256 if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
257 length = -1;
258 break; /* nothing received - leave for() loop */
259 }
wdenkc6097192002-11-03 00:24:07 +0000260
wdenka6ab4bf2004-04-15 21:31:56 +0000261 length = rtx->rxbd[rxIdx].cbd_datlen;
wdenkc6097192002-11-03 00:24:07 +0000262
wdenka6ab4bf2004-04-15 21:31:56 +0000263 if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
wdenkc6097192002-11-03 00:24:07 +0000264#ifdef ET_DEBUG
wdenka6ab4bf2004-04-15 21:31:56 +0000265 printf ("%s[%d] err: %x\n",
266 __FUNCTION__, __LINE__,
267 rtx->rxbd[rxIdx].cbd_sc);
wdenkc6097192002-11-03 00:24:07 +0000268#endif
wdenka6ab4bf2004-04-15 21:31:56 +0000269 } else {
270 volatile uchar *rx = NetRxPackets[rxIdx];
271
272 length -= 4;
273
Jon Loeliger44312832007-07-09 19:06:00 -0500274#if defined(CONFIG_CMD_CDP)
wdenka6ab4bf2004-04-15 21:31:56 +0000275 if ((rx[0] & 1) != 0
276 && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
277 && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
278 rx = NULL;
279#endif
280 /*
281 * Pass the packet up to the protocol layers.
282 */
283 if (rx != NULL)
284 NetReceive (rx, length);
285 }
286
287 /* Give the buffer back to the FEC. */
288 rtx->rxbd[rxIdx].cbd_datlen = 0;
289
290 /* wrap around buffer index when necessary */
291 if ((rxIdx + 1) >= PKTBUFSRX) {
292 rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
293 (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
294 rxIdx = 0;
295 } else {
296 rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
297 rxIdx++;
298 }
299
300 __asm__ ("eieio");
301
302 /* Try to fill Buffer Descriptors */
303 fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
wdenkc6097192002-11-03 00:24:07 +0000304 }
305
wdenka6ab4bf2004-04-15 21:31:56 +0000306 return length;
wdenkc6097192002-11-03 00:24:07 +0000307}
308
309/**************************************************************
310 *
311 * FEC Ethernet Initialization Routine
312 *
313 *************************************************************/
314
315#define FEC_ECNTRL_PINMUX 0x00000004
316#define FEC_ECNTRL_ETHER_EN 0x00000002
317#define FEC_ECNTRL_RESET 0x00000001
318
319#define FEC_RCNTRL_BC_REJ 0x00000010
320#define FEC_RCNTRL_PROM 0x00000008
321#define FEC_RCNTRL_MII_MODE 0x00000004
322#define FEC_RCNTRL_DRT 0x00000002
323#define FEC_RCNTRL_LOOP 0x00000001
324
325#define FEC_TCNTRL_FDEN 0x00000004
326#define FEC_TCNTRL_HBC 0x00000002
327#define FEC_TCNTRL_GTS 0x00000001
328
329#define FEC_RESET_DELAY 50
330
wdenka6ab4bf2004-04-15 21:31:56 +0000331#if defined(CONFIG_RMII)
332
333static inline void fec_10Mbps(struct eth_device *dev)
wdenkc6097192002-11-03 00:24:07 +0000334{
wdenka6ab4bf2004-04-15 21:31:56 +0000335 struct ether_fcc_info_s *efis = dev->priv;
336 int fecidx = efis->ether_index;
337 uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
wdenkc6097192002-11-03 00:24:07 +0000338
wdenka6ab4bf2004-04-15 21:31:56 +0000339 if ((unsigned int)fecidx >= 2)
340 hang();
341
342 ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_cptr |= mask;
343}
344
345static inline void fec_100Mbps(struct eth_device *dev)
346{
347 struct ether_fcc_info_s *efis = dev->priv;
348 int fecidx = efis->ether_index;
349 uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
350
351 if ((unsigned int)fecidx >= 2)
352 hang();
353
354 ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_cptr &= ~mask;
355}
356
357#endif
358
359static inline void fec_full_duplex(struct eth_device *dev)
360{
361 struct ether_fcc_info_s *efis = dev->priv;
362 volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
363
364 fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
365 fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
366}
367
368static inline void fec_half_duplex(struct eth_device *dev)
369{
370 struct ether_fcc_info_s *efis = dev->priv;
371 volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
372
373 fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
374 fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
375}
376
377static void fec_pin_init(int fecidx)
378{
wdenka6ab4bf2004-04-15 21:31:56 +0000379 bd_t *bd = gd->bd;
wdenkc6097192002-11-03 00:24:07 +0000380 volatile immap_t *immr = (immap_t *) CFG_IMMR;
wdenka6ab4bf2004-04-15 21:31:56 +0000381 volatile fec_t *fecp;
wdenkc6097192002-11-03 00:24:07 +0000382
wdenka6ab4bf2004-04-15 21:31:56 +0000383 /*
384 * only two FECs please
wdenkc6097192002-11-03 00:24:07 +0000385 */
wdenka6ab4bf2004-04-15 21:31:56 +0000386 if ((unsigned int)fecidx >= 2)
387 hang();
wdenkc6097192002-11-03 00:24:07 +0000388
wdenka6ab4bf2004-04-15 21:31:56 +0000389 if (fecidx == 0)
390 fecp = &immr->im_cpm.cp_fec1;
391 else
392 fecp = &immr->im_cpm.cp_fec2;
393
394 /*
395 * Set MII speed to 2.5 MHz or slightly below.
396 * * According to the MPC860T (Rev. D) Fast ethernet controller user
397 * * manual (6.2.14),
398 * * the MII management interface clock must be less than or equal
399 * * to 2.5 MHz.
400 * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
401 * * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
Markus Klotzbuecherd6cc73e2006-07-12 09:08:36 +0200402 *
403 * All MII configuration is done via FEC1 registers:
wdenka6ab4bf2004-04-15 21:31:56 +0000404 */
Markus Klotzbuecherd6cc73e2006-07-12 09:08:36 +0200405 immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
wdenka6ab4bf2004-04-15 21:31:56 +0000406
wdenk79fa88f2004-06-07 23:46:25 +0000407#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
wdenkc26e4542004-04-18 10:13:26 +0000408 /* our PHYs are the limit at 2.5 MHz */
409 fecp->fec_mii_speed <<= 1;
410#endif
411
wdenk11142572004-06-06 21:35:06 +0000412#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
wdenka6ab4bf2004-04-15 21:31:56 +0000413 /* use MDC for MII */
414 immr->im_ioport.iop_pdpar |= 0x0080;
415 immr->im_ioport.iop_pddir &= ~0x0080;
416#endif
417
418 if (fecidx == 0) {
419#if defined(CONFIG_ETHER_ON_FEC1)
420
wdenk11142572004-06-06 21:35:06 +0000421#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
wdenka6ab4bf2004-04-15 21:31:56 +0000422
423#if !defined(CONFIG_RMII)
424
425 immr->im_ioport.iop_papar |= 0xf830;
426 immr->im_ioport.iop_padir |= 0x0830;
427 immr->im_ioport.iop_padir &= ~0xf000;
428
429 immr->im_cpm.cp_pbpar |= 0x00001001;
430 immr->im_cpm.cp_pbdir &= ~0x00001001;
431
432 immr->im_ioport.iop_pcpar |= 0x000c;
433 immr->im_ioport.iop_pcdir &= ~0x000c;
434
435 immr->im_cpm.cp_pepar |= 0x00000003;
436 immr->im_cpm.cp_pedir |= 0x00000003;
437 immr->im_cpm.cp_peso &= ~0x00000003;
438
439 immr->im_cpm.cp_cptr &= ~0x00000100;
440
441#else
442
443#if !defined(CONFIG_FEC1_PHY_NORXERR)
444 immr->im_ioport.iop_papar |= 0x1000;
445 immr->im_ioport.iop_padir &= ~0x1000;
446#endif
447 immr->im_ioport.iop_papar |= 0xe810;
448 immr->im_ioport.iop_padir |= 0x0810;
449 immr->im_ioport.iop_padir &= ~0xe000;
450
451 immr->im_cpm.cp_pbpar |= 0x00000001;
452 immr->im_cpm.cp_pbdir &= ~0x00000001;
453
454 immr->im_cpm.cp_cptr |= 0x00000100;
455 immr->im_cpm.cp_cptr &= ~0x00000050;
456
457#endif /* !CONFIG_RMII */
458
459#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
460 /*
461 * Configure all of port D for MII.
462 */
463 immr->im_ioport.iop_pdpar = 0x1fff;
464
465 /*
466 * Bits moved from Rev. D onward
467 */
468 if ((get_immr(0) & 0xffff) < 0x0501)
469 immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
470 else
471 immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
472#else
473 /*
474 * Configure port A for MII.
475 */
476
477#if defined(CONFIG_ICU862) && defined(CFG_DISCOVER_PHY)
478
479 /*
480 * On the ICU862 board the MII-MDC pin is routed to PD8 pin
481 * * of CPU, so for this board we need to configure Utopia and
482 * * enable PD8 to MII-MDC function
483 */
484 immr->im_ioport.iop_pdpar |= 0x4080;
485#endif
486
487 /*
488 * Has Utopia been configured?
489 */
490 if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
491 /*
492 * YES - Use MUXED mode for UTOPIA bus.
493 * This frees Port A for use by MII (see 862UM table 41-6).
494 */
495 immr->im_ioport.utmode &= ~0x80;
496 } else {
497 /*
498 * NO - set SPLIT mode for UTOPIA bus.
499 *
500 * This doesn't really effect UTOPIA (which isn't
501 * enabled anyway) but just tells the 862
502 * to use port A for MII (see 862UM table 41-6).
503 */
504 immr->im_ioport.utmode |= 0x80;
505 }
506#endif /* !defined(CONFIG_ICU862) */
507
508#endif /* CONFIG_ETHER_ON_FEC1 */
509 } else if (fecidx == 1) {
510
511#if defined(CONFIG_ETHER_ON_FEC2)
512
wdenk11142572004-06-06 21:35:06 +0000513#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
wdenka6ab4bf2004-04-15 21:31:56 +0000514
515#if !defined(CONFIG_RMII)
wdenka6ab4bf2004-04-15 21:31:56 +0000516 immr->im_cpm.cp_pepar |= 0x0003fffc;
517 immr->im_cpm.cp_pedir |= 0x0003fffc;
518 immr->im_cpm.cp_peso &= ~0x000087fc;
519 immr->im_cpm.cp_peso |= 0x00037800;
520
521 immr->im_cpm.cp_cptr &= ~0x00000080;
522#else
523
524#if !defined(CONFIG_FEC2_PHY_NORXERR)
525 immr->im_cpm.cp_pepar |= 0x00000010;
526 immr->im_cpm.cp_pedir |= 0x00000010;
527 immr->im_cpm.cp_peso &= ~0x00000010;
528#endif
529 immr->im_cpm.cp_pepar |= 0x00039620;
530 immr->im_cpm.cp_pedir |= 0x00039620;
531 immr->im_cpm.cp_peso |= 0x00031000;
532 immr->im_cpm.cp_peso &= ~0x00008620;
533
534 immr->im_cpm.cp_cptr |= 0x00000080;
535 immr->im_cpm.cp_cptr &= ~0x00000028;
536#endif /* CONFIG_RMII */
537
wdenk11142572004-06-06 21:35:06 +0000538#endif /* CONFIG_MPC885_FAMILY */
wdenka6ab4bf2004-04-15 21:31:56 +0000539
540#endif /* CONFIG_ETHER_ON_FEC2 */
541
wdenkc6097192002-11-03 00:24:07 +0000542 }
wdenka6ab4bf2004-04-15 21:31:56 +0000543}
544
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100545static int fec_reset(volatile fec_t *fecp)
546{
547 int i;
548
549 /* Whack a reset.
550 * A delay is required between a reset of the FEC block and
551 * initialization of other FEC registers because the reset takes
552 * some time to complete. If you don't delay, subsequent writes
553 * to FEC registers might get killed by the reset routine which is
554 * still in progress.
555 */
556
557 fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
558 for (i = 0;
559 (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
560 ++i) {
561 udelay (1);
562 }
563 if (i == FEC_RESET_DELAY)
564 return -1;
565
566 return 0;
567}
568
wdenka6ab4bf2004-04-15 21:31:56 +0000569static int fec_init (struct eth_device *dev, bd_t * bd)
570{
571 struct ether_fcc_info_s *efis = dev->priv;
572 volatile immap_t *immr = (immap_t *) CFG_IMMR;
573 volatile fec_t *fecp =
574 (volatile fec_t *) (CFG_IMMR + efis->fecp_offset);
575 int i;
576
577 if (efis->ether_index == 0) {
578#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
wdenk11142572004-06-06 21:35:06 +0000579#if defined(CONFIG_MPC885ADS)
wdenka6ab4bf2004-04-15 21:31:56 +0000580 *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
581#else
582 /* configure FADS for fast (FEC) ethernet, half-duplex */
583 /* The LXT970 needs about 50ms to recover from reset, so
584 * wait for it by discovering the PHY before leaving eth_init().
585 */
586 {
587 volatile uint *bcsr4 = (volatile uint *) BCSR4;
588
589 *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
590 | (BCSR4_FETHCFG0 | BCSR4_FETHFDE |
591 BCSR4_FETHRST);
592
593 /* reset the LXT970 PHY */
594 *bcsr4 &= ~BCSR4_FETHRST;
595 udelay (10);
596 *bcsr4 |= BCSR4_FETHRST;
597 udelay (10);
598 }
wdenk11142572004-06-06 21:35:06 +0000599#endif /* CONFIG_MPC885ADS */
wdenk180d3f72004-01-04 16:28:35 +0000600#endif /* CONFIG_FADS */
wdenka6ab4bf2004-04-15 21:31:56 +0000601 }
602
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100603#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
604 /* the MII interface is connected to FEC1
605 * so for the miiphy_xxx function to work we must
606 * call mii_init since fec_halt messes the thing up
wdenkc6097192002-11-03 00:24:07 +0000607 */
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100608 if (efis->ether_index != 0)
609 __mii_init();
610#endif
611
612 if (fec_reset(fecp) < 0)
wdenkc6097192002-11-03 00:24:07 +0000613 printf ("FEC_RESET_DELAY timeout\n");
wdenkc6097192002-11-03 00:24:07 +0000614
615 /* We use strictly polling mode only
616 */
617 fecp->fec_imask = 0;
618
619 /* Clear any pending interrupt
620 */
621 fecp->fec_ievent = 0xffc0;
622
623 /* No need to set the IVEC register */
624
625 /* Set station address
626 */
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100627#define ea dev->enetaddr
wdenka6ab4bf2004-04-15 21:31:56 +0000628 fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
629 fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
wdenkc6097192002-11-03 00:24:07 +0000630#undef ea
631
Jon Loeliger44312832007-07-09 19:06:00 -0500632#if defined(CONFIG_CMD_CDP)
wdenka6ab4bf2004-04-15 21:31:56 +0000633 /*
634 * Turn on multicast address hash table
635 */
636 fecp->fec_hash_table_high = 0xffffffff;
637 fecp->fec_hash_table_low = 0xffffffff;
638#else
wdenkc6097192002-11-03 00:24:07 +0000639 /* Clear multicast address hash table
640 */
641 fecp->fec_hash_table_high = 0;
wdenka6ab4bf2004-04-15 21:31:56 +0000642 fecp->fec_hash_table_low = 0;
643#endif
wdenkc6097192002-11-03 00:24:07 +0000644
645 /* Set maximum receive buffer size.
646 */
647 fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
648
649 /* Set maximum frame length
650 */
651 fecp->fec_r_hash = PKT_MAXBUF_SIZE;
652
653 /*
654 * Setup Buffers and Buffer Desriptors
655 */
656 rxIdx = 0;
657 txIdx = 0;
658
659 if (!rtx) {
660#ifdef CFG_ALLOC_DPRAM
wdenka6ab4bf2004-04-15 21:31:56 +0000661 rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
662 dpram_alloc_align (sizeof (RTXBD), 8));
wdenkc6097192002-11-03 00:24:07 +0000663#else
wdenka6ab4bf2004-04-15 21:31:56 +0000664 rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
wdenkc6097192002-11-03 00:24:07 +0000665#endif
666 }
667 /*
668 * Setup Receiver Buffer Descriptors (13.14.24.18)
669 * Settings:
670 * Empty, Wrap
671 */
672 for (i = 0; i < PKTBUFSRX; i++) {
wdenka6ab4bf2004-04-15 21:31:56 +0000673 rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
674 rtx->rxbd[i].cbd_datlen = 0; /* Reset */
wdenkc6097192002-11-03 00:24:07 +0000675 rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
676 }
677 rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
678
679 /*
680 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
681 * Settings:
682 * Last, Tx CRC
683 */
684 for (i = 0; i < TX_BUF_CNT; i++) {
wdenka6ab4bf2004-04-15 21:31:56 +0000685 rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
686 rtx->txbd[i].cbd_datlen = 0; /* Reset */
wdenkc6097192002-11-03 00:24:07 +0000687 rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
688 }
689 rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
690
691 /* Set receive and transmit descriptor base
692 */
693 fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
694 fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
695
696 /* Enable MII mode
697 */
wdenka6ab4bf2004-04-15 21:31:56 +0000698#if 0 /* Full duplex mode */
wdenkc6097192002-11-03 00:24:07 +0000699 fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
700 fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
wdenka6ab4bf2004-04-15 21:31:56 +0000701#else /* Half duplex mode */
wdenkc6097192002-11-03 00:24:07 +0000702 fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
703 fecp->fec_x_cntrl = 0;
704#endif
705
706 /* Enable big endian and don't care about SDMA FC.
707 */
708 fecp->fec_fun_code = 0x78000000;
709
wdenka6ab4bf2004-04-15 21:31:56 +0000710 /*
711 * Setup the pin configuration of the FEC
wdenkc6097192002-11-03 00:24:07 +0000712 */
wdenka6ab4bf2004-04-15 21:31:56 +0000713 fec_pin_init (efis->ether_index);
wdenkc6097192002-11-03 00:24:07 +0000714
715 rxIdx = 0;
716 txIdx = 0;
717
wdenka6ab4bf2004-04-15 21:31:56 +0000718 /*
719 * Now enable the transmit and receive processing
wdenkc6097192002-11-03 00:24:07 +0000720 */
721 fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
722
wdenka6ab4bf2004-04-15 21:31:56 +0000723 if (efis->phy_addr == -1) {
wdenkc6097192002-11-03 00:24:07 +0000724#ifdef CFG_DISCOVER_PHY
wdenka6ab4bf2004-04-15 21:31:56 +0000725 /*
726 * wait for the PHY to wake up after reset
727 */
728 efis->actual_phy_addr = mii_discover_phy (dev);
wdenk62b4ac92004-05-05 08:31:53 +0000729
wdenka6ab4bf2004-04-15 21:31:56 +0000730 if (efis->actual_phy_addr == -1) {
731 printf ("Unable to discover phy!\n");
Ben Warren422b1a02008-01-09 18:15:53 -0500732 return -1;
wdenka6ab4bf2004-04-15 21:31:56 +0000733 }
wdenk62b4ac92004-05-05 08:31:53 +0000734#else
735 efis->actual_phy_addr = -1;
736#endif
wdenka6ab4bf2004-04-15 21:31:56 +0000737 } else {
738 efis->actual_phy_addr = efis->phy_addr;
739 }
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100740
wdenka6ab4bf2004-04-15 21:31:56 +0000741#if defined(CONFIG_MII) && defined(CONFIG_RMII)
742 /*
743 * adapt the RMII speed to the speed of the phy
wdenkc6097192002-11-03 00:24:07 +0000744 */
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200745 if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
wdenka6ab4bf2004-04-15 21:31:56 +0000746 fec_100Mbps (dev);
747 } else {
748 fec_10Mbps (dev);
749 }
750#endif
751
752#if defined(CONFIG_MII)
753 /*
754 * adapt to the half/full speed settings
755 */
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200756 if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
wdenka6ab4bf2004-04-15 21:31:56 +0000757 fec_full_duplex (dev);
758 } else {
759 fec_half_duplex (dev);
760 }
wdenkc6097192002-11-03 00:24:07 +0000761#endif
762
763 /* And last, try to fill Rx Buffer Descriptors */
wdenka6ab4bf2004-04-15 21:31:56 +0000764 fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
wdenkc6097192002-11-03 00:24:07 +0000765
wdenkc26e4542004-04-18 10:13:26 +0000766 efis->initialized = 1;
767
Ben Warren422b1a02008-01-09 18:15:53 -0500768 return 0;
wdenkc6097192002-11-03 00:24:07 +0000769}
770
771
wdenkc6097192002-11-03 00:24:07 +0000772static void fec_halt(struct eth_device* dev)
773{
wdenkc26e4542004-04-18 10:13:26 +0000774 struct ether_fcc_info_s *efis = dev->priv;
775 volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
776 int i;
wdenkc6097192002-11-03 00:24:07 +0000777
wdenkc26e4542004-04-18 10:13:26 +0000778 /* avoid halt if initialized; mii gets stuck otherwise */
779 if (!efis->initialized)
780 return;
781
782 /* Whack a reset.
783 * A delay is required between a reset of the FEC block and
784 * initialization of other FEC registers because the reset takes
785 * some time to complete. If you don't delay, subsequent writes
786 * to FEC registers might get killed by the reset routine which is
787 * still in progress.
788 */
789
790 fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
791 for (i = 0;
792 (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
793 ++i) {
794 udelay (1);
795 }
796 if (i == FEC_RESET_DELAY) {
797 printf ("FEC_RESET_DELAY timeout\n");
798 return;
799 }
800
801 efis->initialized = 0;
wdenkc6097192002-11-03 00:24:07 +0000802}
wdenkc6097192002-11-03 00:24:07 +0000803
Jon Loeliger44312832007-07-09 19:06:00 -0500804#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
wdenkc6097192002-11-03 00:24:07 +0000805
806/* Make MII read/write commands for the FEC.
807*/
808
809#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
810 (REG & 0x1f) << 18))
811
812#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
813 (REG & 0x1f) << 18) | \
814 (VAL & 0xffff))
815
816/* Interrupt events/masks.
817*/
818#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
819#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
820#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
821#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
822#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
823#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
824#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
825#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
826#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
827#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
828
829/* PHY identification
830 */
831#define PHY_ID_LXT970 0x78100000 /* LXT970 */
832#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
833#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
834#define PHY_ID_QS6612 0x01814400 /* QS6612 */
835#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
836#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
837#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
wdenk180d3f72004-01-04 16:28:35 +0000838#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200839#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
wdenkc6097192002-11-03 00:24:07 +0000840
841/* send command to phy using mii, wait for result */
842static uint
843mii_send(uint mii_cmd)
844{
845 uint mii_reply;
846 volatile fec_t *ep;
wdenkc26e4542004-04-18 10:13:26 +0000847 int cnt;
wdenkc6097192002-11-03 00:24:07 +0000848
849 ep = &(((immap_t *)CFG_IMMR)->im_cpm.cp_fec);
850
851 ep->fec_mii_data = mii_cmd; /* command to phy */
852
853 /* wait for mii complete */
wdenkc26e4542004-04-18 10:13:26 +0000854 cnt = 0;
855 while (!(ep->fec_ievent & FEC_ENET_MII)) {
856 if (++cnt > 1000) {
857 printf("mii_send STUCK!\n");
858 break;
859 }
860 }
wdenkc6097192002-11-03 00:24:07 +0000861 mii_reply = ep->fec_mii_data; /* result from phy */
862 ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
863#if 0
864 printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
865 __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
866#endif
867 return (mii_reply & 0xffff); /* data read from phy */
868}
Jon Loeliger44312832007-07-09 19:06:00 -0500869#endif
wdenkc6097192002-11-03 00:24:07 +0000870
871#if defined(CFG_DISCOVER_PHY)
wdenka6ab4bf2004-04-15 21:31:56 +0000872static int mii_discover_phy(struct eth_device *dev)
wdenkc6097192002-11-03 00:24:07 +0000873{
874#define MAX_PHY_PASSES 11
875 uint phyno;
876 int pass;
wdenka6ab4bf2004-04-15 21:31:56 +0000877 uint phytype;
878 int phyaddr;
wdenkc6097192002-11-03 00:24:07 +0000879
880 phyaddr = -1; /* didn't find a PHY yet */
881 for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
882 if (pass > 1) {
883 /* PHY may need more time to recover from reset.
884 * The LXT970 needs 50ms typical, no maximum is
885 * specified, so wait 10ms before try again.
886 * With 11 passes this gives it 100ms to wake up.
887 */
888 udelay(10000); /* wait 10ms */
889 }
890 for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100891 phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
wdenkc6097192002-11-03 00:24:07 +0000892#ifdef ET_DEBUG
893 printf("PHY type 0x%x pass %d type ", phytype, pass);
894#endif
895 if (phytype != 0xffff) {
896 phyaddr = phyno;
wdenkc6097192002-11-03 00:24:07 +0000897 phytype |= mii_send(mk_mii_read(phyno,
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100898 PHY_PHYIDR1)) << 16;
wdenkc6097192002-11-03 00:24:07 +0000899
900#ifdef ET_DEBUG
901 printf("PHY @ 0x%x pass %d type ",phyno,pass);
902 switch (phytype & 0xfffffff0) {
903 case PHY_ID_LXT970:
904 printf("LXT970\n");
905 break;
906 case PHY_ID_LXT971:
907 printf("LXT971\n");
908 break;
909 case PHY_ID_82555:
910 printf("82555\n");
911 break;
912 case PHY_ID_QS6612:
913 printf("QS6612\n");
914 break;
915 case PHY_ID_AMD79C784:
916 printf("AMD79C784\n");
917 break;
918 case PHY_ID_LSI80225B:
919 printf("LSI L80225/B\n");
920 break;
wdenk180d3f72004-01-04 16:28:35 +0000921 case PHY_ID_DM9161:
922 printf("Davicom DM9161\n");
923 break;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200924 case PHY_ID_KSM8995M:
925 printf("MICREL KS8995M\n");
926 break;
wdenkc6097192002-11-03 00:24:07 +0000927 default:
928 printf("0x%08x\n", phytype);
929 break;
930 }
931#endif
932 }
933 }
934 }
935 if (phyaddr < 0) {
936 printf("No PHY device found.\n");
937 }
wdenka6ab4bf2004-04-15 21:31:56 +0000938 return phyaddr;
wdenkc6097192002-11-03 00:24:07 +0000939}
940#endif /* CFG_DISCOVER_PHY */
941
Jon Loeliger44312832007-07-09 19:06:00 -0500942#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
wdenkc6097192002-11-03 00:24:07 +0000943
wdenkc6097192002-11-03 00:24:07 +0000944/****************************************************************************
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100945 * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
wdenkc6097192002-11-03 00:24:07 +0000946 * This function is a subset of eth_init
947 ****************************************************************************
948 */
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100949static void __mii_init(void)
wdenkc6097192002-11-03 00:24:07 +0000950{
wdenkc6097192002-11-03 00:24:07 +0000951 volatile immap_t *immr = (immap_t *) CFG_IMMR;
952 volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
wdenkc6097192002-11-03 00:24:07 +0000953
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100954 if (fec_reset(fecp) < 0)
wdenkc6097192002-11-03 00:24:07 +0000955 printf ("FEC_RESET_DELAY timeout\n");
wdenkc6097192002-11-03 00:24:07 +0000956
957 /* We use strictly polling mode only
958 */
959 fecp->fec_imask = 0;
960
961 /* Clear any pending interrupt
962 */
963 fecp->fec_ievent = 0xffc0;
964
wdenkc6097192002-11-03 00:24:07 +0000965 /* Now enable the transmit and receive processing
966 */
967 fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
Guennadi Liakhovetskid197ffd2007-11-29 21:15:56 +0100968}
969
970void mii_init (void)
971{
972 int i;
973
974 __mii_init();
975
976 /* Setup the pin configuration of the FEC(s)
977 */
978 for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
979 fec_pin_init(ether_fcc_info[i].ether_index);
wdenkc6097192002-11-03 00:24:07 +0000980}
wdenka6ab4bf2004-04-15 21:31:56 +0000981
wdenkc6097192002-11-03 00:24:07 +0000982/*****************************************************************************
983 * Read and write a MII PHY register, routines used by MII Utilities
984 *
985 * FIXME: These routines are expected to return 0 on success, but mii_send
986 * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
987 * no PHY connected...
988 * For now always return 0.
989 * FIXME: These routines only work after calling eth_init() at least once!
990 * Otherwise they hang in mii_send() !!! Sorry!
991 *****************************************************************************/
992
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200993int fec8xx_miiphy_read(char *devname, unsigned char addr,
994 unsigned char reg, unsigned short *value)
wdenkc6097192002-11-03 00:24:07 +0000995{
996 short rdreg; /* register working value */
997
998#ifdef MII_DEBUG
999 printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
1000#endif
1001 rdreg = mii_send(mk_mii_read(addr, reg));
1002
1003 *value = rdreg;
wdenkc6097192002-11-03 00:24:07 +00001004#ifdef MII_DEBUG
1005 printf ("0x%04x\n", *value);
1006#endif
wdenkc6097192002-11-03 00:24:07 +00001007 return 0;
1008}
1009
Marian Balakowicz63ff0042005-10-28 22:30:33 +02001010int fec8xx_miiphy_write(char *devname, unsigned char addr,
1011 unsigned char reg, unsigned short value)
wdenkc6097192002-11-03 00:24:07 +00001012{
1013 short rdreg; /* register working value */
wdenkc6097192002-11-03 00:24:07 +00001014#ifdef MII_DEBUG
1015 printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
1016#endif
wdenkc6097192002-11-03 00:24:07 +00001017 rdreg = mii_send(mk_mii_write(addr, reg, value));
1018
1019#ifdef MII_DEBUG
1020 printf ("0x%04x\n", value);
1021#endif
wdenkc6097192002-11-03 00:24:07 +00001022 return 0;
1023}
Jon Loeliger44312832007-07-09 19:06:00 -05001024#endif
wdenkc6097192002-11-03 00:24:07 +00001025
Jon Loeliger068b60a2007-07-10 10:27:39 -05001026#endif