Green Wan | 1c07b0c | 2021-05-27 06:52:12 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* Copyright (c) 2019-2021 SiFive, Inc */ |
| 3 | |
| 4 | #include "fu740-c000.dtsi" |
| 5 | #include <dt-bindings/gpio/gpio.h> |
| 6 | #include <dt-bindings/interrupt-controller/irq.h> |
| 7 | |
| 8 | /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ |
| 9 | #define RTCCLK_FREQ 1000000 |
| 10 | |
| 11 | / { |
| 12 | #address-cells = <2>; |
| 13 | #size-cells = <2>; |
| 14 | model = "SiFive HiFive Unmatched A00"; |
| 15 | compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000", |
| 16 | "sifive,fu740"; |
| 17 | |
| 18 | chosen { |
| 19 | stdout-path = "serial0"; |
| 20 | }; |
| 21 | |
| 22 | cpus { |
| 23 | timebase-frequency = <RTCCLK_FREQ>; |
| 24 | }; |
| 25 | |
| 26 | memory@80000000 { |
| 27 | device_type = "memory"; |
| 28 | reg = <0x0 0x80000000 0x4 0x00000000>; |
| 29 | }; |
| 30 | |
| 31 | soc { |
| 32 | }; |
| 33 | |
| 34 | hfclk: hfclk { |
| 35 | #clock-cells = <0>; |
| 36 | compatible = "fixed-clock"; |
| 37 | clock-frequency = <26000000>; |
| 38 | clock-output-names = "hfclk"; |
| 39 | }; |
| 40 | |
| 41 | rtcclk: rtcclk { |
| 42 | #clock-cells = <0>; |
| 43 | compatible = "fixed-clock"; |
| 44 | clock-frequency = <RTCCLK_FREQ>; |
| 45 | clock-output-names = "rtcclk"; |
| 46 | }; |
| 47 | |
| 48 | gpio-poweroff { |
| 49 | compatible = "gpio-poweroff"; |
| 50 | gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | &uart0 { |
| 55 | status = "okay"; |
| 56 | }; |
| 57 | |
| 58 | &uart1 { |
| 59 | status = "okay"; |
| 60 | }; |
| 61 | |
| 62 | &i2c0 { |
| 63 | status = "okay"; |
| 64 | |
| 65 | temperature-sensor@4c { |
| 66 | compatible = "ti,tmp451"; |
| 67 | reg = <0x4c>; |
| 68 | interrupt-parent = <&gpio>; |
| 69 | interrupts = <6 IRQ_TYPE_LEVEL_LOW>; |
| 70 | }; |
| 71 | |
| 72 | pmic@58 { |
| 73 | compatible = "dlg,da9063"; |
| 74 | reg = <0x58>; |
| 75 | interrupt-parent = <&gpio>; |
| 76 | interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| 77 | interrupt-controller; |
| 78 | |
| 79 | regulators { |
| 80 | vdd_bcore1: bcore1 { |
| 81 | regulator-min-microvolt = <1050000>; |
| 82 | regulator-max-microvolt = <1050000>; |
| 83 | regulator-min-microamp = <5000000>; |
| 84 | regulator-max-microamp = <5000000>; |
| 85 | regulator-always-on; |
| 86 | }; |
| 87 | |
| 88 | vdd_bcore2: bcore2 { |
| 89 | regulator-min-microvolt = <1050000>; |
| 90 | regulator-max-microvolt = <1050000>; |
| 91 | regulator-min-microamp = <5000000>; |
| 92 | regulator-max-microamp = <5000000>; |
| 93 | regulator-always-on; |
| 94 | }; |
| 95 | |
| 96 | vdd_bpro: bpro { |
| 97 | regulator-min-microvolt = <1800000>; |
| 98 | regulator-max-microvolt = <1800000>; |
| 99 | regulator-min-microamp = <2500000>; |
| 100 | regulator-max-microamp = <2500000>; |
| 101 | regulator-always-on; |
| 102 | }; |
| 103 | |
| 104 | vdd_bperi: bperi { |
| 105 | regulator-min-microvolt = <1050000>; |
| 106 | regulator-max-microvolt = <1050000>; |
| 107 | regulator-min-microamp = <1500000>; |
| 108 | regulator-max-microamp = <1500000>; |
| 109 | regulator-always-on; |
| 110 | }; |
| 111 | |
| 112 | vdd_bmem: bmem { |
| 113 | regulator-min-microvolt = <1200000>; |
| 114 | regulator-max-microvolt = <1200000>; |
| 115 | regulator-min-microamp = <3000000>; |
| 116 | regulator-max-microamp = <3000000>; |
| 117 | regulator-always-on; |
| 118 | }; |
| 119 | |
| 120 | vdd_bio: bio { |
| 121 | regulator-min-microvolt = <1200000>; |
| 122 | regulator-max-microvolt = <1200000>; |
| 123 | regulator-min-microamp = <3000000>; |
| 124 | regulator-max-microamp = <3000000>; |
| 125 | regulator-always-on; |
| 126 | }; |
| 127 | |
| 128 | vdd_ldo1: ldo1 { |
| 129 | regulator-min-microvolt = <1800000>; |
| 130 | regulator-max-microvolt = <1800000>; |
| 131 | regulator-min-microamp = <100000>; |
| 132 | regulator-max-microamp = <100000>; |
| 133 | regulator-always-on; |
| 134 | }; |
| 135 | |
| 136 | vdd_ldo2: ldo2 { |
| 137 | regulator-min-microvolt = <1800000>; |
| 138 | regulator-max-microvolt = <1800000>; |
| 139 | regulator-min-microamp = <200000>; |
| 140 | regulator-max-microamp = <200000>; |
| 141 | regulator-always-on; |
| 142 | }; |
| 143 | |
| 144 | vdd_ldo3: ldo3 { |
| 145 | regulator-min-microvolt = <3300000>; |
| 146 | regulator-max-microvolt = <3300000>; |
| 147 | regulator-min-microamp = <200000>; |
| 148 | regulator-max-microamp = <200000>; |
| 149 | regulator-always-on; |
| 150 | }; |
| 151 | |
| 152 | vdd_ldo4: ldo4 { |
| 153 | regulator-min-microvolt = <2500000>; |
| 154 | regulator-max-microvolt = <2500000>; |
| 155 | regulator-min-microamp = <200000>; |
| 156 | regulator-max-microamp = <200000>; |
| 157 | regulator-always-on; |
| 158 | }; |
| 159 | |
| 160 | vdd_ldo5: ldo5 { |
| 161 | regulator-min-microvolt = <3300000>; |
| 162 | regulator-max-microvolt = <3300000>; |
| 163 | regulator-min-microamp = <100000>; |
| 164 | regulator-max-microamp = <100000>; |
| 165 | regulator-always-on; |
| 166 | }; |
| 167 | |
| 168 | vdd_ldo6: ldo6 { |
| 169 | regulator-min-microvolt = <1800000>; |
| 170 | regulator-max-microvolt = <1800000>; |
| 171 | regulator-min-microamp = <200000>; |
| 172 | regulator-max-microamp = <200000>; |
| 173 | regulator-always-on; |
| 174 | }; |
| 175 | |
| 176 | vdd_ldo7: ldo7 { |
| 177 | regulator-min-microvolt = <3300000>; |
| 178 | regulator-max-microvolt = <3300000>; |
| 179 | regulator-min-microamp = <200000>; |
| 180 | regulator-max-microamp = <200000>; |
| 181 | regulator-always-on; |
| 182 | }; |
| 183 | |
| 184 | vdd_ldo8: ldo8 { |
| 185 | regulator-min-microvolt = <3300000>; |
| 186 | regulator-max-microvolt = <3300000>; |
| 187 | regulator-min-microamp = <200000>; |
| 188 | regulator-max-microamp = <200000>; |
| 189 | regulator-always-on; |
| 190 | }; |
| 191 | |
| 192 | vdd_ld09: ldo9 { |
| 193 | regulator-min-microvolt = <1050000>; |
| 194 | regulator-max-microvolt = <1050000>; |
| 195 | regulator-min-microamp = <200000>; |
| 196 | regulator-max-microamp = <200000>; |
| 197 | }; |
| 198 | |
| 199 | vdd_ldo10: ldo10 { |
| 200 | regulator-min-microvolt = <1000000>; |
| 201 | regulator-max-microvolt = <1000000>; |
| 202 | regulator-min-microamp = <300000>; |
| 203 | regulator-max-microamp = <300000>; |
| 204 | }; |
| 205 | |
| 206 | vdd_ldo11: ldo11 { |
| 207 | regulator-min-microvolt = <2500000>; |
| 208 | regulator-max-microvolt = <2500000>; |
| 209 | regulator-min-microamp = <300000>; |
| 210 | regulator-max-microamp = <300000>; |
| 211 | regulator-always-on; |
| 212 | }; |
| 213 | }; |
| 214 | }; |
| 215 | }; |
| 216 | |
| 217 | &qspi0 { |
| 218 | status = "okay"; |
| 219 | flash@0 { |
| 220 | compatible = "issi,is25wp256", "jedec,spi-nor"; |
| 221 | reg = <0>; |
| 222 | spi-max-frequency = <50000000>; |
| 223 | m25p,fast-read; |
| 224 | spi-tx-bus-width = <4>; |
| 225 | spi-rx-bus-width = <4>; |
| 226 | }; |
| 227 | }; |
| 228 | |
| 229 | &spi0 { |
| 230 | status = "okay"; |
| 231 | mmc@0 { |
| 232 | compatible = "mmc-spi-slot"; |
| 233 | reg = <0>; |
| 234 | spi-max-frequency = <20000000>; |
| 235 | voltage-ranges = <3300 3300>; |
| 236 | disable-wp; |
| 237 | }; |
| 238 | }; |
| 239 | |
| 240 | ð0 { |
| 241 | status = "okay"; |
| 242 | phy-mode = "gmii"; |
| 243 | phy-handle = <&phy0>; |
| 244 | phy0: ethernet-phy@0 { |
| 245 | reg = <0>; |
| 246 | }; |
| 247 | }; |
| 248 | |
| 249 | &pwm0 { |
| 250 | status = "okay"; |
| 251 | }; |
| 252 | |
| 253 | &pwm1 { |
| 254 | status = "okay"; |
| 255 | }; |
| 256 | |
| 257 | &gpio { |
| 258 | status = "okay"; |
| 259 | }; |