blob: 9441e9a572adba0b152da2ca85616238648e2da4 [file] [log] [blame]
Tero Kristo8f1ed2e2020-06-16 11:03:09 +03001// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 */
5/dts-v1/;
6
7#include "omap5-board-common.dtsi"
8
9/ {
10 model = "TI OMAP5 uEVM board";
11 compatible = "ti,omap5-uevm", "ti,omap5";
12
13 memory@80000000 {
14 device_type = "memory";
15 reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
16 };
17
18 aliases {
19 ethernet = &ethernet;
20 };
21
22 leds {
23 compatible = "gpio-leds";
24 led1 {
25 label = "omap5:blue:usr1";
26 gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
27 linux,default-trigger = "heartbeat";
28 default-state = "off";
29 };
30 };
31
32 evm_keys {
33 compatible = "gpio-keys";
34
35 pinctrl-names = "default";
36 pinctrl-0 = <&evm_keys_pins>;
37
38 #address-cells = <7>;
39 #size-cells = <0>;
40
41 btn1 {
42 label = "BTN1";
43 linux,code = <169>;
44 gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */
45 wakeup-source;
46 autorepeat;
47 debounce-interval = <50>;
48 };
49 };
50
51 evm_leds {
52 compatible = "gpio-leds";
53
54 led1 {
55 label = "omap5:red:led";
56 gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
57 linux,default-trigger = "mmc0";
58 default-state = "off";
59 };
60
61 led2 {
62 label = "omap5:green:led";
63 gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
64 linux,default-trigger = "mmc1";
65 default-state = "off";
66 };
67
68 led3 {
69 label = "omap5:blue:led";
70 gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
71 linux,default-trigger = "mmc2";
72 default-state = "off";
73 };
74
75 led4 {
76 label = "omap5:green:led1";
77 gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
78 linux,default-trigger = "heartbeat";
79 default-state = "off";
80 };
81
82 led5 {
83 label = "omap5:green:led2";
84 gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
85 linux,default-trigger = "default-on";
86 default-state = "off";
87 };
88
89 led6 {
90 label = "omap5:green:led3";
91 gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
92 linux,default-trigger = "heartbeat";
93 default-state = "off";
94 };
95
96 led7 {
97 label = "omap5:green:led4";
98 gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
99 linux,default-trigger = "default-on";
100 default-state = "off";
101 };
102
103 led8 {
104 label = "omap5:green:led5";
105 gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
106 linux,default-trigger = "heartbeat";
107 default-state = "off";
108 };
109 };
110};
111
112&hdmi {
113 vdda-supply = <&ldo4_reg>;
114};
115
116&i2c1 {
117 eeprom@50 {
118 compatible = "atmel,24c02";
119 reg = <0x50>;
120 };
121};
122
123&i2c5 {
124 pinctrl-names = "default";
125 pinctrl-0 = <&i2c5_pins>;
126
127 clock-frequency = <400000>;
128
129 gpio9: gpio@22 {
130 compatible = "ti,tca6424";
131 reg = <0x22>;
132 gpio-controller;
133 #gpio-cells = <2>;
134 };
135};
136
137&mmc1 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&mmc1_pins>;
140
141 cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */
142};
143
144&omap5_pmx_core {
145 evm_keys_pins: pinmux_evm_keys_gpio_pins {
146 pinctrl-single,pins = <
147 OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */
148 >;
149 };
150
151 i2c5_pins: pinmux_i2c5_pins {
152 pinctrl-single,pins = <
153 OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */
154 OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */
155 >;
156 };
157
158 mmc1_pins: pinmux_mmc1_pins {
159 pinctrl-single,pins = <
160 OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */
161 >;
162 };
163};
164
165&tpd12s015 {
166 gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
167 <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
168 <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
169};
170
171&twl6040 {
172 ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
173};
174
175&twl6040_pins {
176 pinctrl-single,pins = <
177 OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
178 >;
179};
180
181&usbhsehci {
182 #address-cells = <1>;
183 #size-cells = <0>;
184
185 hub@2 {
186 compatible = "usb424,3503";
187 reg = <2>;
188 #address-cells = <1>;
189 #size-cells = <0>;
190 };
191
192 ethernet: usbether@3 {
193 compatible = "usb424,9730";
194 reg = <3>;
195 };
196};
197
198&wlcore {
199 compatible = "ti,wl1837";
200};