blob: 2e11aaa13cd35156e605cf29723b6f6a6ff2d9cb [file] [log] [blame]
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08001/*
ramneek mehresh3d7506f2012-04-18 19:39:53 +00002 * Copyright 2011-2012 Freescale Semiconductor, Inc.
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08003 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08005 */
6
7/*
8 * P2041 RDB board configuration file
Scott Wood3e978f52012-08-14 10:14:51 +00009 * Also supports P2040 RDB
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080010 */
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14#define CONFIG_P2041RDB
15#define CONFIG_PHYS_64BIT
16#define CONFIG_PPC_P2041
17
18#ifdef CONFIG_RAMBOOT_PBL
19#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
20#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
Masahiro Yamadae4536f82014-03-11 11:05:16 +090021#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
22#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080023#endif
24
Liu Gang461632b2012-08-09 05:10:03 +000025#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
Liu Gangff65f122012-08-09 05:09:59 +000026/* Set 1M boot space */
Liu Gang461632b2012-08-09 05:10:03 +000027#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
28#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
29 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
Liu Gangff65f122012-08-09 05:09:59 +000030#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
31#define CONFIG_SYS_NO_FLASH
32#endif
33
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080034/* High Level Configuration Options */
35#define CONFIG_BOOKE
36#define CONFIG_E500 /* BOOKE e500 family */
37#define CONFIG_E500MC /* BOOKE e500mc family */
38#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080039#define CONFIG_MP /* support multiple processors */
40
41#ifndef CONFIG_SYS_TEXT_BASE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053042#define CONFIG_SYS_TEXT_BASE 0xeff40000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080043#endif
44
45#ifndef CONFIG_RESET_VECTOR_ADDRESS
46#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
47#endif
48
49#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
50#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
51#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
Ruchika Gupta737537e2014-10-15 11:35:31 +053052#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080053#define CONFIG_PCI /* Enable PCI/PCIE */
54#define CONFIG_PCIE1 /* PCIE controler 1 */
55#define CONFIG_PCIE2 /* PCIE controler 2 */
56#define CONFIG_PCIE3 /* PCIE controler 3 */
57#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
58#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
59
60#define CONFIG_SYS_SRIO
61#define CONFIG_SRIO1 /* SRIO port 1 */
62#define CONFIG_SRIO2 /* SRIO port 2 */
Liu Gangc8b28152013-05-07 16:30:46 +080063#define CONFIG_SRIO_PCIE_BOOT_MASTER
Kumar Gala4d28db82011-10-14 13:28:52 -050064#define CONFIG_SYS_DPAA_RMAN /* RMan */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080065
66#define CONFIG_FSL_LAW /* Use common FSL init code */
67
68#define CONFIG_ENV_OVERWRITE
69
70#ifdef CONFIG_SYS_NO_FLASH
Liu Gang461632b2012-08-09 05:10:03 +000071#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080072#define CONFIG_ENV_IS_NOWHERE
Shaohui Xie0f57f6a2012-06-28 23:35:34 +000073#endif
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080074#else
75#define CONFIG_FLASH_CFI_DRIVER
76#define CONFIG_SYS_FLASH_CFI
Shaohui Xie0f57f6a2012-06-28 23:35:34 +000077#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080078#endif
79
80#if defined(CONFIG_SPIFLASH)
81 #define CONFIG_SYS_EXTRA_ENV_RELOC
82 #define CONFIG_ENV_IS_IN_SPI_FLASH
83 #define CONFIG_ENV_SPI_BUS 0
84 #define CONFIG_ENV_SPI_CS 0
85 #define CONFIG_ENV_SPI_MAX_HZ 10000000
86 #define CONFIG_ENV_SPI_MODE 0
87 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
88 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
89 #define CONFIG_ENV_SECT_SIZE 0x10000
90#elif defined(CONFIG_SDCARD)
91 #define CONFIG_SYS_EXTRA_ENV_RELOC
92 #define CONFIG_ENV_IS_IN_MMC
Fabio Estevam4394d0c2012-01-11 09:20:50 +000093 #define CONFIG_FSL_FIXED_MMC_LOCATION
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080094 #define CONFIG_SYS_MMC_ENV_DEV 0
95 #define CONFIG_ENV_SIZE 0x2000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053096 #define CONFIG_ENV_OFFSET (512 * 1658)
Shaohui Xie15c8c6c2012-02-28 23:28:40 +000097#elif defined(CONFIG_NAND)
98#define CONFIG_SYS_EXTRA_ENV_RELOC
99#define CONFIG_ENV_IS_IN_NAND
100#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530101#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
Liu Gang461632b2012-08-09 05:10:03 +0000102#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Liu Gangff65f122012-08-09 05:09:59 +0000103#define CONFIG_ENV_IS_IN_REMOTE
104#define CONFIG_ENV_ADDR 0xffe20000
105#define CONFIG_ENV_SIZE 0x2000
Shaohui Xie0f57f6a2012-06-28 23:35:34 +0000106#elif defined(CONFIG_ENV_IS_NOWHERE)
Liu Gangff65f122012-08-09 05:09:59 +0000107#define CONFIG_ENV_SIZE 0x2000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800108#else
109 #define CONFIG_ENV_IS_IN_FLASH
110 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
111 - CONFIG_ENV_SECT_SIZE)
112 #define CONFIG_ENV_SIZE 0x2000
113 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
114#endif
115
Shaohui Xie44d50f02011-09-13 17:55:11 +0800116#ifndef __ASSEMBLY__
117unsigned long get_board_sys_clk(unsigned long dummy);
118#endif
119#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800120
121/*
122 * These can be toggled for performance analysis, otherwise use default.
123 */
124#define CONFIG_SYS_CACHE_STASHING
Mingkai Hucd420e02011-07-21 17:03:54 -0500125#define CONFIG_BACKSIDE_L2_CACHE
126#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800127#define CONFIG_BTB /* toggle branch predition */
128
129#define CONFIG_ENABLE_36BIT_PHYS
130
131#ifdef CONFIG_PHYS_64BIT
132#define CONFIG_ADDR_MAP
133#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
134#endif
135
136#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
137#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
138#define CONFIG_SYS_MEMTEST_END 0x00400000
139#define CONFIG_SYS_ALT_MEMTEST
140#define CONFIG_PANIC_HANG /* do not reset board on panic */
141
142/*
143 * Config the L3 Cache as L3 SRAM
144 */
145#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
146#ifdef CONFIG_PHYS_64BIT
147#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \
148 CONFIG_RAMBOOT_TEXT_BASE)
149#else
150#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
151#endif
152#define CONFIG_SYS_L3_SIZE (1024 << 10)
153#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
154
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800155#ifdef CONFIG_PHYS_64BIT
156#define CONFIG_SYS_DCSRBAR 0xf0000000
157#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
158#endif
159
160/* EEPROM */
161#define CONFIG_ID_EEPROM
162#define CONFIG_SYS_I2C_EEPROM_NXID
163#define CONFIG_SYS_EEPROM_BUS_NUM 0
164#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
165#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
166
167/*
168 * DDR Setup
169 */
170#define CONFIG_VERY_BIG_RAM
171#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
172#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
173
174#define CONFIG_DIMM_SLOTS_PER_CTLR 1
175#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
176
177#define CONFIG_DDR_SPD
York Sun5614e712013-09-30 09:22:09 -0700178#define CONFIG_SYS_FSL_DDR3
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800179
180#define CONFIG_SYS_SPD_BUS_NUM 0
181#define SPD_EEPROM_ADDRESS 0x52
182#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
183
184/*
185 * Local Bus Definitions
186 */
187
188/* Set the local bus clock 1/8 of platform clock */
189#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
190
York Sunca1b0b82012-10-26 16:40:15 +0000191/*
192 * This board doesn't have a promjet connector.
193 * However, it uses commone corenet board LAW and TLB.
194 * It is necessary to use the same start address with proper offset.
195 */
196#define CONFIG_SYS_FLASH_BASE 0xe0000000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800197#ifdef CONFIG_PHYS_64BIT
York Sunca1b0b82012-10-26 16:40:15 +0000198#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800199#else
200#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
201#endif
202
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000203#define CONFIG_SYS_FLASH_BR_PRELIM \
York Sunca1b0b82012-10-26 16:40:15 +0000204 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
205 BR_PS_16 | BR_V)
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000206#define CONFIG_SYS_FLASH_OR_PRELIM \
207 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
208 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800209
210#define CONFIG_FSL_CPLD
211#define CPLD_BASE 0xffdf0000 /* CPLD registers */
212#ifdef CONFIG_PHYS_64BIT
213#define CPLD_BASE_PHYS 0xfffdf0000ull
214#else
215#define CPLD_BASE_PHYS CPLD_BASE
216#endif
217
218#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
219#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
220
221#define PIXIS_LBMAP_SWITCH 7
222#define PIXIS_LBMAP_MASK 0xf0
223#define PIXIS_LBMAP_SHIFT 4
224#define PIXIS_LBMAP_ALTBANK 0x40
225
226#define CONFIG_SYS_FLASH_QUIET_TEST
227#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
228
229#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
230#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
231#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */
232#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */
233
234#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
235
236#if defined(CONFIG_RAMBOOT_PBL)
237#define CONFIG_SYS_RAMBOOT
238#endif
239
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000240#define CONFIG_NAND_FSL_ELBC
241/* Nand Flash */
242#ifdef CONFIG_NAND_FSL_ELBC
243#define CONFIG_SYS_NAND_BASE 0xffa00000
244#ifdef CONFIG_PHYS_64BIT
245#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
246#else
247#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
248#endif
249
250#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
251#define CONFIG_SYS_MAX_NAND_DEVICE 1
252#define CONFIG_MTD_NAND_VERIFY_WRITE
253#define CONFIG_CMD_NAND
254#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
255
256/* NAND flash config */
257#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
258 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
259 | BR_PS_8 /* Port Size = 8 bit */ \
260 | BR_MS_FCM /* MSEL = FCM */ \
261 | BR_V) /* valid */
262#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
263 | OR_FCM_PGS /* Large Page*/ \
264 | OR_FCM_CSCT \
265 | OR_FCM_CST \
266 | OR_FCM_CHT \
267 | OR_FCM_SCY_1 \
268 | OR_FCM_TRLX \
269 | OR_FCM_EHTR)
270
271#ifdef CONFIG_NAND
272#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
273#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
274#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
275#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
276#else
277#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
278#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
279#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
280#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
281#endif
282#else
283#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
284#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
285#endif /* CONFIG_NAND_FSL_ELBC */
286
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800287#define CONFIG_SYS_FLASH_EMPTY_INFO
288#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
York Sunca1b0b82012-10-26 16:40:15 +0000289#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800290
291#define CONFIG_BOARD_EARLY_INIT_F
292#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
293#define CONFIG_MISC_INIT_R
294
295#define CONFIG_HWCONFIG
296
297/* define to use L1 as initial stack */
298#define CONFIG_L1_INIT_RAM
299#define CONFIG_SYS_INIT_RAM_LOCK
300#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
301#ifdef CONFIG_PHYS_64BIT
302#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
303#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
304/* The assembler doesn't like typecast */
305#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
306 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
307 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
308#else
309#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
310#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
311#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
312#endif
313#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
314
315#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
316 GENERATED_GBL_DATA_SIZE)
317#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
318
Prabhakar Kushwaha9307cba2014-03-31 15:31:48 +0530319#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800320#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
321
322/* Serial Port - controlled on board with jumper J8
323 * open - index 2
324 * shorted - index 1
325 */
326#define CONFIG_CONS_INDEX 1
327#define CONFIG_SYS_NS16550
328#define CONFIG_SYS_NS16550_SERIAL
329#define CONFIG_SYS_NS16550_REG_SIZE 1
330#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
331
332#define CONFIG_SYS_BAUDRATE_TABLE \
333 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
334
335#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
336#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
337#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
338#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
339
340/* Use the HUSH parser */
341#define CONFIG_SYS_HUSH_PARSER
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800342
343/* pass open firmware flat tree */
344#define CONFIG_OF_LIBFDT
345#define CONFIG_OF_BOARD_SETUP
346#define CONFIG_OF_STDOUT_VIA_ALIAS
347
348/* new uImage format support */
349#define CONFIG_FIT
350#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
351
352/* I2C */
Heiko Schocher00f792e2012-10-24 13:48:22 +0200353#define CONFIG_SYS_I2C
354#define CONFIG_SYS_I2C_FSL
355#define CONFIG_SYS_FSL_I2C_SPEED 400000
356#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
Shaohui Xie2bd1aab2013-09-10 16:15:07 +0800357#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
Heiko Schocher00f792e2012-10-24 13:48:22 +0200358#define CONFIG_SYS_FSL_I2C2_SPEED 400000
359#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
Shaohui Xie2bd1aab2013-09-10 16:15:07 +0800360#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800361
362/*
363 * RapidIO
364 */
365#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
366#ifdef CONFIG_PHYS_64BIT
367#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
368#else
369#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
370#endif
371#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
372
373#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
374#ifdef CONFIG_PHYS_64BIT
375#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
376#else
377#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
378#endif
379#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
380
381/*
Liu Gangff65f122012-08-09 05:09:59 +0000382 * for slave u-boot IMAGE instored in master memory space,
383 * PHYS must be aligned based on the SIZE
384 */
Liu Gange4911812014-05-15 14:30:34 +0800385#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
386#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
387#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
388#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
Liu Gangff65f122012-08-09 05:09:59 +0000389/*
390 * for slave UCODE and ENV instored in master memory space,
391 * PHYS must be aligned based on the SIZE
392 */
Liu Gange4911812014-05-15 14:30:34 +0800393#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
Liu Gangb5f7c872012-08-09 05:10:02 +0000394#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
395#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
Liu Gangff65f122012-08-09 05:09:59 +0000396
397/* slave core release by master*/
Liu Gangb5f7c872012-08-09 05:10:02 +0000398#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
399#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
Liu Gangff65f122012-08-09 05:09:59 +0000400
401/*
Liu Gang461632b2012-08-09 05:10:03 +0000402 * SRIO_PCIE_BOOT - SLAVE
Liu Gangff65f122012-08-09 05:09:59 +0000403 */
Liu Gang461632b2012-08-09 05:10:03 +0000404#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
405#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
406#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
407 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
Liu Gangff65f122012-08-09 05:09:59 +0000408#endif
409
410/*
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800411 * eSPI - Enhanced SPI
412 */
413#define CONFIG_FSL_ESPI
414#define CONFIG_SPI_FLASH
415#define CONFIG_SPI_FLASH_SPANSION
416#define CONFIG_CMD_SF
417#define CONFIG_SF_DEFAULT_SPEED 10000000
418#define CONFIG_SF_DEFAULT_MODE 0
419
420/*
421 * General PCI
422 * Memory space is mapped 1-1, but I/O space must start from 0.
423 */
424
425/* controller 1, direct to uli, tgtid 3, Base address 20000 */
426#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
427#ifdef CONFIG_PHYS_64BIT
428#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
429#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
430#else
431#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
432#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
433#endif
434#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
435#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
436#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
437#ifdef CONFIG_PHYS_64BIT
438#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
439#else
440#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
441#endif
442#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
443
444/* controller 2, Slot 2, tgtid 2, Base address 201000 */
445#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
446#ifdef CONFIG_PHYS_64BIT
447#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
448#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
449#else
450#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
451#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
452#endif
453#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
454#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
455#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
456#ifdef CONFIG_PHYS_64BIT
457#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
458#else
459#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
460#endif
461#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
462
463/* controller 3, Slot 1, tgtid 1, Base address 202000 */
464#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
465#ifdef CONFIG_PHYS_64BIT
466#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
467#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
468#else
469#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
470#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
471#endif
472#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
473#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
474#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
475#ifdef CONFIG_PHYS_64BIT
476#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
477#else
478#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
479#endif
480#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
481
482/* Qman/Bman */
483#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
484#define CONFIG_SYS_BMAN_NUM_PORTALS 10
485#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
486#ifdef CONFIG_PHYS_64BIT
487#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
488#else
489#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
490#endif
491#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
492#define CONFIG_SYS_QMAN_NUM_PORTALS 10
493#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
494#ifdef CONFIG_PHYS_64BIT
495#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
496#else
497#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
498#endif
499#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
500
501#define CONFIG_SYS_DPAA_FMAN
502#define CONFIG_SYS_DPAA_PME
503/* Default address of microcode for the Linux Fman driver */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800504#if defined(CONFIG_SPIFLASH)
505/*
506 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
507 * env, so we got 0x110000.
508 */
Timur Tabif2717b42011-11-22 09:21:25 -0600509#define CONFIG_SYS_QE_FW_IN_SPIFLASH
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800510#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800511#elif defined(CONFIG_SDCARD)
512/*
513 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530514 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
515 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800516 */
Timur Tabif2717b42011-11-22 09:21:25 -0600517#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800518#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800519#elif defined(CONFIG_NAND)
Timur Tabif2717b42011-11-22 09:21:25 -0600520#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800521#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
Liu Gang461632b2012-08-09 05:10:03 +0000522#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Liu Gangff65f122012-08-09 05:09:59 +0000523/*
524 * Slave has no ucode locally, it can fetch this from remote. When implementing
525 * in two corenet boards, slave's ucode could be stored in master's memory
526 * space, the address can be mapped from slave TLB->slave LAW->
Liu Gang461632b2012-08-09 05:10:03 +0000527 * slave SRIO or PCIE outbound window->master inbound window->
528 * master LAW->the ucode address in master's memory space.
Liu Gangff65f122012-08-09 05:09:59 +0000529 */
530#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800531#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800532#else
Timur Tabif2717b42011-11-22 09:21:25 -0600533#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800534#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800535#endif
Timur Tabif2717b42011-11-22 09:21:25 -0600536#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
537#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800538
539#ifdef CONFIG_SYS_DPAA_FMAN
540#define CONFIG_FMAN_ENET
Mingkai Hu0787ecc2011-07-19 16:20:13 +0800541#define CONFIG_PHYLIB_10G
542#define CONFIG_PHY_VITESSE
543#define CONFIG_PHY_TERANETICS
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800544#endif
545
546#ifdef CONFIG_PCI
Gabor Juhos842033e2013-05-30 07:06:12 +0000547#define CONFIG_PCI_INDIRECT_BRIDGE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800548#define CONFIG_PCI_PNP /* do pci plug-and-play */
549#define CONFIG_E1000
550
551#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
552#define CONFIG_DOS_PARTITION
553#endif /* CONFIG_PCI */
554
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800555/* SATA */
Zang Roy-R619119760b272012-11-26 00:05:38 +0000556#define CONFIG_FSL_SATA_V2
557
558#ifdef CONFIG_FSL_SATA_V2
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800559#define CONFIG_FSL_SATA
Timur Tabi3e0529f2011-11-21 17:10:22 -0600560#define CONFIG_LIBATA
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800561
562#define CONFIG_SYS_SATA_MAX_DEVICE 2
563#define CONFIG_SATA1
564#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
565#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
566#define CONFIG_SATA2
567#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
568#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
569
570#define CONFIG_LBA48
571#define CONFIG_CMD_SATA
572#define CONFIG_DOS_PARTITION
573#define CONFIG_CMD_EXT2
574#endif
575
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800576#ifdef CONFIG_FMAN_ENET
577#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2
578#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3
579#define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4
580#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1
581#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0
582
583#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
584#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
585#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
586#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
587
Mingkai Hu0787ecc2011-07-19 16:20:13 +0800588#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0
589
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800590#define CONFIG_SYS_TBIPA_VALUE 8
591#define CONFIG_MII /* MII PHY management */
592#define CONFIG_ETHPRIME "FM1@DTSEC1"
593#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
594#endif
595
596/*
597 * Environment
598 */
599#define CONFIG_LOADS_ECHO /* echo on for serial download */
600#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
601
602/*
603 * Command line configuration.
604 */
605#include <config_cmd_default.h>
606
607#define CONFIG_CMD_DHCP
608#define CONFIG_CMD_ELF
609#define CONFIG_CMD_ERRATA
610#define CONFIG_CMD_GREPENV
611#define CONFIG_CMD_IRQ
612#define CONFIG_CMD_I2C
613#define CONFIG_CMD_MII
614#define CONFIG_CMD_PING
615#define CONFIG_CMD_SETEXPR
616
617#ifdef CONFIG_PCI
618#define CONFIG_CMD_PCI
619#define CONFIG_CMD_NET
620#endif
621
622/*
623* USB
624*/
ramneek mehresh3d7506f2012-04-18 19:39:53 +0000625#define CONFIG_HAS_FSL_DR_USB
626#define CONFIG_HAS_FSL_MPH_USB
627
628#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800629#define CONFIG_CMD_USB
630#define CONFIG_USB_STORAGE
631#define CONFIG_USB_EHCI
632#define CONFIG_USB_EHCI_FSL
633#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
ramneek mehresh3d7506f2012-04-18 19:39:53 +0000634#endif
635
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800636#define CONFIG_CMD_EXT2
637
638#define CONFIG_MMC
639
640#ifdef CONFIG_MMC
641#define CONFIG_FSL_ESDHC
642#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
643#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
644#define CONFIG_CMD_MMC
645#define CONFIG_GENERIC_MMC
646#define CONFIG_CMD_EXT2
647#define CONFIG_CMD_FAT
648#define CONFIG_DOS_PARTITION
649#endif
650
Ruchika Gupta737537e2014-10-15 11:35:31 +0530651/* Hash command with SHA acceleration supported in hardware */
652#ifdef CONFIG_FSL_CAAM
653#define CONFIG_CMD_HASH
654#define CONFIG_SHA_HW_ACCEL
655#endif
656
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800657/*
658 * Miscellaneous configurable options
659 */
660#define CONFIG_SYS_LONGHELP /* undef to save memory */
661#define CONFIG_CMDLINE_EDITING /* Command-line editing */
662#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
663#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800664#ifdef CONFIG_CMD_KGDB
665#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
666#else
667#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
668#endif
669/* Print Buffer Size */
670#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
671 sizeof(CONFIG_SYS_PROMPT)+16)
672#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
673/* Boot Argument Buffer Size */
674#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800675
676/*
677 * For booting Linux, the board info and command line data
678 * have to be in the first 64 MB of memory, since this is
679 * the maximum mapped by the Linux kernel during initialization.
680 */
681#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */
682#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
683
684#ifdef CONFIG_CMD_KGDB
685#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800686#endif
687
688/*
689 * Environment Configuration
690 */
Joe Hershberger8b3637c2011-10-13 13:03:47 +0000691#define CONFIG_ROOTPATH "/opt/nfsroot"
Joe Hershbergerb3f44c22011-10-13 13:03:48 +0000692#define CONFIG_BOOTFILE "uImage"
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800693#define CONFIG_UBOOTPATH u-boot.bin
694
695/* default location for tftp and bootm */
696#define CONFIG_LOADADDR 1000000
697
698#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
699
700#define CONFIG_BAUDRATE 115200
701
702#define __USB_PHY_TYPE utmi
703
704#define CONFIG_EXTRA_ENV_SETTINGS \
705 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
706 "bank_intlv=cs0_cs1\0" \
707 "netdev=eth0\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200708 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
709 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800710 "tftpflash=tftpboot $loadaddr $uboot && " \
711 "protect off $ubootaddr +$filesize && " \
712 "erase $ubootaddr +$filesize && " \
713 "cp.b $loadaddr $ubootaddr $filesize && " \
714 "protect on $ubootaddr +$filesize && " \
715 "cmp.b $loadaddr $ubootaddr $filesize\0" \
716 "consoledev=ttyS0\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200717 "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800718 "usb_dr_mode=host\0" \
719 "ramdiskaddr=2000000\0" \
720 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \
721 "fdtaddr=c00000\0" \
722 "fdtfile=p2041rdb/p2041rdb.dtb\0" \
Kim Phillips32465842014-05-14 19:33:45 -0500723 "bdev=sda3\0"
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800724
725#define CONFIG_HDBOOT \
726 "setenv bootargs root=/dev/$bdev rw " \
727 "console=$consoledev,$baudrate $othbootargs;" \
728 "tftp $loadaddr $bootfile;" \
729 "tftp $fdtaddr $fdtfile;" \
730 "bootm $loadaddr - $fdtaddr"
731
732#define CONFIG_NFSBOOTCOMMAND \
733 "setenv bootargs root=/dev/nfs rw " \
734 "nfsroot=$serverip:$rootpath " \
735 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
736 "console=$consoledev,$baudrate $othbootargs;" \
737 "tftp $loadaddr $bootfile;" \
738 "tftp $fdtaddr $fdtfile;" \
739 "bootm $loadaddr - $fdtaddr"
740
741#define CONFIG_RAMBOOTCOMMAND \
742 "setenv bootargs root=/dev/ram rw " \
743 "console=$consoledev,$baudrate $othbootargs;" \
744 "tftp $ramdiskaddr $ramdiskfile;" \
745 "tftp $loadaddr $bootfile;" \
746 "tftp $fdtaddr $fdtfile;" \
747 "bootm $loadaddr $ramdiskaddr $fdtaddr"
748
749#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
750
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800751#include <asm/fsl_secure_boot.h>
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800752
Ruchika Gupta789490b2014-10-07 15:48:46 +0530753#ifdef CONFIG_SECURE_BOOT
754#define CONFIG_CMD_BLOB
755#endif
756
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800757#endif /* __CONFIG_H */