Marcel Ziswiler | 50ba171 | 2022-07-21 15:27:27 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright 2014-2022 Toradex |
| 4 | * Copyright 2012 Freescale Semiconductor, Inc. |
| 5 | * Copyright 2011 Linaro Ltd. |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | #include <dt-bindings/pwm/pwm.h> |
| 10 | |
| 11 | / { |
| 12 | model = "Toradex Apalis iMX6Q/D Module"; |
| 13 | compatible = "toradex,apalis_imx6q", "fsl,imx6q"; |
| 14 | |
| 15 | /* Will be filled by the bootloader */ |
| 16 | memory@10000000 { |
| 17 | device_type = "memory"; |
| 18 | reg = <0x10000000 0>; |
| 19 | }; |
| 20 | |
| 21 | backlight: backlight { |
| 22 | compatible = "pwm-backlight"; |
| 23 | brightness-levels = <0 45 63 88 119 158 203 255>; |
| 24 | default-brightness-level = <4>; |
| 25 | enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; |
| 26 | pinctrl-names = "default"; |
| 27 | pinctrl-0 = <&pinctrl_gpio_bl_on>; |
| 28 | power-supply = <®_module_3v3>; |
| 29 | pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>; |
| 30 | status = "disabled"; |
| 31 | }; |
| 32 | |
| 33 | clk_ov5640_osc: clk-ov5640-osc { |
| 34 | compatible = "fixed-clock"; |
| 35 | #clock-cells = <0>; |
| 36 | clock-frequency = <24000000>; |
| 37 | }; |
| 38 | |
| 39 | gpio-keys { |
| 40 | compatible = "gpio-keys"; |
| 41 | pinctrl-names = "default"; |
| 42 | pinctrl-0 = <&pinctrl_gpio_keys>; |
| 43 | |
| 44 | wakeup { |
| 45 | debounce-interval = <10>; |
| 46 | gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 47 | label = "Wake-Up"; |
| 48 | linux,code = <KEY_WAKEUP>; |
| 49 | wakeup-source; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | lcd_display: disp0 { |
| 54 | compatible = "fsl,imx-parallel-display"; |
| 55 | #address-cells = <1>; |
| 56 | #size-cells = <0>; |
| 57 | interface-pix-fmt = "rgb24"; |
| 58 | pinctrl-names = "default"; |
| 59 | pinctrl-0 = <&pinctrl_ipu1_lcdif>; |
| 60 | status = "disabled"; |
| 61 | |
| 62 | port@0 { |
| 63 | reg = <0>; |
| 64 | |
| 65 | lcd_display_in: endpoint { |
| 66 | remote-endpoint = <&ipu1_di1_disp1>; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | port@1 { |
| 71 | reg = <1>; |
| 72 | |
| 73 | lcd_display_out: endpoint { |
| 74 | remote-endpoint = <&lcd_panel_in>; |
| 75 | }; |
| 76 | }; |
| 77 | }; |
| 78 | |
| 79 | panel_dpi: panel-dpi { |
| 80 | compatible = "edt,et057090dhu"; |
| 81 | backlight = <&backlight>; |
| 82 | |
| 83 | status = "disabled"; |
| 84 | |
| 85 | port { |
| 86 | lcd_panel_in: endpoint { |
| 87 | remote-endpoint = <&lcd_display_out>; |
| 88 | }; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | panel_lvds: panel-lvds { |
| 93 | compatible = "panel-lvds"; |
| 94 | backlight = <&backlight>; |
| 95 | status = "disabled"; |
| 96 | |
| 97 | port { |
| 98 | lvds_panel_in: endpoint { |
| 99 | remote-endpoint = <&lvds0_out>; |
| 100 | }; |
| 101 | }; |
| 102 | }; |
| 103 | |
| 104 | reg_module_3v3: regulator-module-3v3 { |
| 105 | compatible = "regulator-fixed"; |
| 106 | regulator-always-on; |
| 107 | regulator-max-microvolt = <3300000>; |
| 108 | regulator-min-microvolt = <3300000>; |
| 109 | regulator-name = "+V3.3"; |
| 110 | }; |
| 111 | |
| 112 | reg_module_3v3_audio: regulator-module-3v3-audio { |
| 113 | compatible = "regulator-fixed"; |
| 114 | regulator-always-on; |
| 115 | regulator-max-microvolt = <3300000>; |
| 116 | regulator-min-microvolt = <3300000>; |
| 117 | regulator-name = "+V3.3_AUDIO"; |
| 118 | }; |
| 119 | |
| 120 | reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { |
| 121 | compatible = "regulator-fixed"; |
| 122 | regulator-always-on; |
| 123 | regulator-max-microvolt = <1800000>; |
| 124 | regulator-min-microvolt = <1800000>; |
| 125 | regulator-name = "DOVDD/DVDD_1.8V"; |
| 126 | /* Note: The CSI module uses on-board 3.3V_SW supply */ |
| 127 | vin-supply = <®_module_3v3>; |
| 128 | }; |
| 129 | |
| 130 | reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd { |
| 131 | compatible = "regulator-fixed"; |
| 132 | regulator-always-on; |
| 133 | regulator-max-microvolt = <2800000>; |
| 134 | regulator-min-microvolt = <2800000>; |
| 135 | regulator-name = "AVDD/AFVDD_2.8V"; |
| 136 | /* Note: The CSI module uses on-board 3.3V_SW supply */ |
| 137 | vin-supply = <®_module_3v3>; |
| 138 | }; |
| 139 | |
| 140 | reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| 141 | compatible = "regulator-fixed"; |
| 142 | enable-active-high; |
| 143 | gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 144 | pinctrl-names = "default"; |
| 145 | pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; |
| 146 | regulator-max-microvolt = <5000000>; |
| 147 | regulator-min-microvolt = <5000000>; |
| 148 | regulator-name = "usb_otg_vbus"; |
| 149 | status = "disabled"; |
| 150 | }; |
| 151 | |
| 152 | /* on module USB hub */ |
| 153 | reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { |
| 154 | compatible = "regulator-fixed"; |
| 155 | enable-active-high; |
| 156 | gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| 157 | pinctrl-names = "default"; |
| 158 | pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; |
| 159 | regulator-max-microvolt = <5000000>; |
| 160 | regulator-min-microvolt = <5000000>; |
| 161 | regulator-name = "usb_host_vbus_hub"; |
| 162 | startup-delay-us = <2000>; |
| 163 | status = "okay"; |
| 164 | }; |
| 165 | |
| 166 | reg_usb_host_vbus: regulator-usb-host-vbus { |
| 167 | compatible = "regulator-fixed"; |
| 168 | enable-active-high; |
| 169 | gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| 170 | pinctrl-names = "default"; |
| 171 | pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; |
| 172 | regulator-max-microvolt = <5000000>; |
| 173 | regulator-min-microvolt = <5000000>; |
| 174 | regulator-name = "usb_host_vbus"; |
| 175 | vin-supply = <®_usb_host_vbus_hub>; |
| 176 | status = "disabled"; |
| 177 | }; |
| 178 | |
| 179 | sound { |
| 180 | compatible = "fsl,imx-audio-sgtl5000"; |
| 181 | audio-codec = <&codec>; |
| 182 | audio-routing = |
| 183 | "LINE_IN", "Line In Jack", |
| 184 | "MIC_IN", "Mic Jack", |
| 185 | "Mic Jack", "Mic Bias", |
| 186 | "Headphone Jack", "HP_OUT"; |
| 187 | model = "imx6q-apalis-sgtl5000"; |
| 188 | mux-ext-port = <4>; |
| 189 | mux-int-port = <1>; |
| 190 | ssi-controller = <&ssi1>; |
| 191 | }; |
| 192 | |
| 193 | sound_spdif: sound-spdif { |
| 194 | compatible = "fsl,imx-audio-spdif"; |
| 195 | spdif-controller = <&spdif>; |
| 196 | spdif-in; |
| 197 | spdif-out; |
| 198 | model = "imx-spdif"; |
| 199 | status = "disabled"; |
| 200 | }; |
| 201 | }; |
| 202 | |
| 203 | &audmux { |
| 204 | pinctrl-names = "default"; |
| 205 | pinctrl-0 = <&pinctrl_audmux>; |
| 206 | status = "okay"; |
| 207 | }; |
| 208 | |
| 209 | &can1 { |
| 210 | pinctrl-names = "default", "sleep"; |
| 211 | pinctrl-0 = <&pinctrl_flexcan1_default>; |
| 212 | pinctrl-1 = <&pinctrl_flexcan1_sleep>; |
| 213 | status = "disabled"; |
| 214 | }; |
| 215 | |
| 216 | &can2 { |
| 217 | pinctrl-names = "default", "sleep"; |
| 218 | pinctrl-0 = <&pinctrl_flexcan2_default>; |
| 219 | pinctrl-1 = <&pinctrl_flexcan2_sleep>; |
| 220 | status = "disabled"; |
| 221 | }; |
| 222 | |
| 223 | &clks { |
| 224 | fsl,pmic-stby-poweroff; |
| 225 | }; |
| 226 | |
| 227 | /* Apalis SPI1 */ |
| 228 | &ecspi1 { |
| 229 | cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; |
| 230 | pinctrl-names = "default"; |
| 231 | pinctrl-0 = <&pinctrl_ecspi1>; |
| 232 | status = "disabled"; |
| 233 | }; |
| 234 | |
| 235 | /* Apalis SPI2 */ |
| 236 | &ecspi2 { |
| 237 | cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; |
| 238 | pinctrl-names = "default"; |
| 239 | pinctrl-0 = <&pinctrl_ecspi2>; |
| 240 | status = "disabled"; |
| 241 | }; |
| 242 | |
| 243 | &gpio1 { |
| 244 | gpio-line-names = "MXM3_84", |
| 245 | "MXM3_4", |
| 246 | "MXM3_15/GPIO7", |
| 247 | "MXM3_96", |
| 248 | "MXM3_37", |
| 249 | "", |
| 250 | "MXM3_17/GPIO8", |
| 251 | "MXM3_14", |
| 252 | "MXM3_12", |
| 253 | "MXM3_2", |
| 254 | "MXM3_184", |
| 255 | "MXM3_180", |
| 256 | "MXM3_178", |
| 257 | "MXM3_176", |
| 258 | "MXM3_188", |
| 259 | "MXM3_186", |
| 260 | "MXM3_160", |
| 261 | "MXM3_162", |
| 262 | "MXM3_150", |
| 263 | "MXM3_144", |
| 264 | "MXM3_154", |
| 265 | "MXM3_146", |
| 266 | "", |
| 267 | "", |
| 268 | "MXM3_72"; |
| 269 | }; |
| 270 | |
| 271 | &gpio2 { |
| 272 | gpio-line-names = "MXM3_148", |
| 273 | "MXM3_152", |
| 274 | "MXM3_156", |
| 275 | "MXM3_158", |
| 276 | "MXM3_1/GPIO1", |
| 277 | "MXM3_3/GPIO2", |
| 278 | "MXM3_5/GPIO3", |
| 279 | "MXM3_7/GPIO4", |
| 280 | "MXM3_95", |
| 281 | "MXM3_6", |
| 282 | "MXM3_8", |
| 283 | "MXM3_123", |
| 284 | "MXM3_126", |
| 285 | "MXM3_128", |
| 286 | "MXM3_130", |
| 287 | "MXM3_132", |
| 288 | "MXM3_253", |
| 289 | "MXM3_251", |
| 290 | "MXM3_283", |
| 291 | "MXM3_281", |
| 292 | "MXM3_279", |
| 293 | "MXM3_277", |
| 294 | "MXM3_243", |
| 295 | "MXM3_235", |
| 296 | "MXM3_231", |
| 297 | "MXM3_229", |
| 298 | "MXM3_233", |
| 299 | "MXM3_198", |
| 300 | "MXM3_275", |
| 301 | "MXM3_273", |
| 302 | "MXM3_207", |
| 303 | "MXM3_122"; |
| 304 | }; |
| 305 | |
| 306 | &gpio3 { |
| 307 | gpio-line-names = "MXM3_271", |
| 308 | "MXM3_269", |
| 309 | "MXM3_301", |
| 310 | "MXM3_299", |
| 311 | "MXM3_297", |
| 312 | "MXM3_295", |
| 313 | "MXM3_293", |
| 314 | "MXM3_291", |
| 315 | "MXM3_289", |
| 316 | "MXM3_287", |
| 317 | "MXM3_249", |
| 318 | "MXM3_247", |
| 319 | "MXM3_245", |
| 320 | "MXM3_286", |
| 321 | "MXM3_239", |
| 322 | "MXM3_35", |
| 323 | "MXM3_205", |
| 324 | "MXM3_203", |
| 325 | "MXM3_201", |
| 326 | "MXM3_116", |
| 327 | "MXM3_114", |
| 328 | "MXM3_262", |
| 329 | "MXM3_274", |
| 330 | "MXM3_124", |
| 331 | "MXM3_110", |
| 332 | "MXM3_120", |
| 333 | "MXM3_263", |
| 334 | "MXM3_265", |
| 335 | "", |
| 336 | "MXM3_135", |
| 337 | "MXM3_261", |
| 338 | "MXM3_259"; |
| 339 | }; |
| 340 | |
| 341 | &gpio4 { |
| 342 | gpio-line-names = "", |
| 343 | "", |
| 344 | "", |
| 345 | "", |
| 346 | "", |
| 347 | "MXM3_194", |
| 348 | "MXM3_136", |
| 349 | "MXM3_134", |
| 350 | "MXM3_140", |
| 351 | "MXM3_138", |
| 352 | "", |
| 353 | "MXM3_220", |
| 354 | "", |
| 355 | "", |
| 356 | "MXM3_18", |
| 357 | "MXM3_16", |
| 358 | "", |
| 359 | "", |
| 360 | "MXM3_214", |
| 361 | "MXM3_216", |
| 362 | "MXM3_164"; |
| 363 | }; |
| 364 | |
| 365 | &gpio5 { |
| 366 | gpio-line-names = "MXM3_159", |
| 367 | "", |
| 368 | "", |
| 369 | "", |
| 370 | "MXM3_257", |
| 371 | "", |
| 372 | "", |
| 373 | "", |
| 374 | "", |
| 375 | "", |
| 376 | "MXM3_200", |
| 377 | "MXM3_196", |
| 378 | "MXM3_204", |
| 379 | "MXM3_202", |
| 380 | "", |
| 381 | "", |
| 382 | "", |
| 383 | "", |
| 384 | "MXM3_191", |
| 385 | "MXM3_197", |
| 386 | "MXM3_77", |
| 387 | "MXM3_195", |
| 388 | "MXM3_221", |
| 389 | "MXM3_225", |
| 390 | "MXM3_223", |
| 391 | "MXM3_227", |
| 392 | "MXM3_209", |
| 393 | "MXM3_211", |
| 394 | "MXM3_118", |
| 395 | "MXM3_112", |
| 396 | "MXM3_187", |
| 397 | "MXM3_185"; |
| 398 | }; |
| 399 | |
| 400 | &gpio6 { |
| 401 | gpio-line-names = "MXM3_183", |
| 402 | "MXM3_181", |
| 403 | "MXM3_179", |
| 404 | "MXM3_177", |
| 405 | "MXM3_175", |
| 406 | "MXM3_173", |
| 407 | "MXM3_255", |
| 408 | "MXM3_83", |
| 409 | "MXM3_91", |
| 410 | "MXM3_13/GPIO6", |
| 411 | "MXM3_11/GPIO5", |
| 412 | "MXM3_79", |
| 413 | "", |
| 414 | "", |
| 415 | "MXM3_190", |
| 416 | "MXM3_193", |
| 417 | "MXM3_89"; |
| 418 | }; |
| 419 | |
| 420 | &gpio7 { |
| 421 | gpio-line-names = "", |
| 422 | "", |
| 423 | "", |
| 424 | "", |
| 425 | "", |
| 426 | "", |
| 427 | "", |
| 428 | "", |
| 429 | "", |
| 430 | "MXM3_99", |
| 431 | "MXM3_85", |
| 432 | "MXM3_217", |
| 433 | "MXM3_215"; |
| 434 | }; |
| 435 | |
| 436 | &gpr { |
| 437 | ipu1_csi0_mux { |
| 438 | #address-cells = <1>; |
| 439 | #size-cells = <0>; |
| 440 | status = "disabled"; |
| 441 | |
| 442 | port@1 { |
| 443 | reg = <1>; |
| 444 | ipu1_csi0_mux_from_parallel_sensor: endpoint { |
| 445 | remote-endpoint = <&adv7280_to_ipu1_csi0_mux>; |
| 446 | }; |
| 447 | }; |
| 448 | }; |
| 449 | }; |
| 450 | |
| 451 | &fec { |
| 452 | pinctrl-names = "default"; |
| 453 | pinctrl-0 = <&pinctrl_enet>; |
| 454 | phy-mode = "rgmii-id"; |
| 455 | phy-handle = <ðphy>; |
| 456 | phy-reset-duration = <10>; |
| 457 | phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 458 | status = "okay"; |
| 459 | |
| 460 | mdio { |
| 461 | #address-cells = <1>; |
| 462 | #size-cells = <0>; |
| 463 | |
| 464 | ethphy: ethernet-phy@7 { |
| 465 | interrupt-parent = <&gpio1>; |
| 466 | interrupts = <30 IRQ_TYPE_LEVEL_LOW>; |
| 467 | reg = <7>; |
| 468 | }; |
| 469 | }; |
| 470 | }; |
| 471 | |
| 472 | &hdmi { |
| 473 | pinctrl-names = "default"; |
| 474 | pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>; |
| 475 | status = "disabled"; |
| 476 | }; |
| 477 | |
| 478 | /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| 479 | &i2c1 { |
| 480 | clock-frequency = <100000>; |
| 481 | pinctrl-names = "default", "gpio"; |
| 482 | pinctrl-0 = <&pinctrl_i2c1>; |
| 483 | pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 484 | scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 485 | sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 486 | status = "disabled"; |
| 487 | |
| 488 | atmel_mxt_ts: touchscreen@4a { |
| 489 | compatible = "atmel,maxtouch"; |
| 490 | /* These GPIOs are muxed with the iomuxc node */ |
| 491 | interrupt-parent = <&gpio6>; |
| 492 | interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */ |
| 493 | reg = <0x4a>; |
| 494 | reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */ |
| 495 | status = "disabled"; |
| 496 | }; |
| 497 | }; |
| 498 | |
| 499 | /* |
| 500 | * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| 501 | * touch screen controller |
| 502 | */ |
| 503 | &i2c2 { |
| 504 | clock-frequency = <100000>; |
| 505 | pinctrl-names = "default", "gpio"; |
| 506 | pinctrl-0 = <&pinctrl_i2c2>; |
| 507 | pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| 508 | scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 509 | sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 510 | status = "okay"; |
| 511 | |
| 512 | pmic: pmic@8 { |
| 513 | compatible = "fsl,pfuze100"; |
| 514 | fsl,pmic-stby-poweroff; |
| 515 | reg = <0x08>; |
| 516 | |
| 517 | regulators { |
| 518 | sw1a_reg: sw1ab { |
| 519 | regulator-always-on; |
| 520 | regulator-boot-on; |
| 521 | regulator-max-microvolt = <1875000>; |
| 522 | regulator-min-microvolt = <300000>; |
| 523 | regulator-ramp-delay = <6250>; |
| 524 | }; |
| 525 | |
| 526 | sw1c_reg: sw1c { |
| 527 | regulator-always-on; |
| 528 | regulator-boot-on; |
| 529 | regulator-max-microvolt = <1875000>; |
| 530 | regulator-min-microvolt = <300000>; |
| 531 | regulator-ramp-delay = <6250>; |
| 532 | }; |
| 533 | |
| 534 | sw3a_reg: sw3a { |
| 535 | regulator-always-on; |
| 536 | regulator-boot-on; |
| 537 | regulator-max-microvolt = <1975000>; |
| 538 | regulator-min-microvolt = <400000>; |
| 539 | }; |
| 540 | |
| 541 | swbst_reg: swbst { |
| 542 | regulator-always-on; |
| 543 | regulator-boot-on; |
| 544 | regulator-max-microvolt = <5150000>; |
| 545 | regulator-min-microvolt = <5000000>; |
| 546 | }; |
| 547 | |
| 548 | snvs_reg: vsnvs { |
| 549 | regulator-always-on; |
| 550 | regulator-boot-on; |
| 551 | regulator-max-microvolt = <3000000>; |
| 552 | regulator-min-microvolt = <1000000>; |
| 553 | }; |
| 554 | |
| 555 | vref_reg: vrefddr { |
| 556 | regulator-always-on; |
| 557 | regulator-boot-on; |
| 558 | }; |
| 559 | |
| 560 | vgen1_reg: vgen1 { |
| 561 | regulator-always-on; |
| 562 | regulator-boot-on; |
| 563 | regulator-max-microvolt = <1550000>; |
| 564 | regulator-min-microvolt = <800000>; |
| 565 | }; |
| 566 | |
| 567 | vgen2_reg: vgen2 { |
| 568 | regulator-always-on; |
| 569 | regulator-boot-on; |
| 570 | regulator-max-microvolt = <1550000>; |
| 571 | regulator-min-microvolt = <800000>; |
| 572 | }; |
| 573 | |
| 574 | vgen3_reg: vgen3 { |
| 575 | regulator-always-on; |
| 576 | regulator-boot-on; |
| 577 | regulator-max-microvolt = <3300000>; |
| 578 | regulator-min-microvolt = <1800000>; |
| 579 | }; |
| 580 | |
| 581 | vgen4_reg: vgen4 { |
| 582 | regulator-always-on; |
| 583 | regulator-boot-on; |
| 584 | regulator-max-microvolt = <1800000>; |
| 585 | regulator-min-microvolt = <1800000>; |
| 586 | }; |
| 587 | |
| 588 | vgen5_reg: vgen5 { |
| 589 | regulator-always-on; |
| 590 | regulator-boot-on; |
| 591 | regulator-max-microvolt = <3300000>; |
| 592 | regulator-min-microvolt = <1800000>; |
| 593 | }; |
| 594 | |
| 595 | vgen6_reg: vgen6 { |
| 596 | regulator-always-on; |
| 597 | regulator-boot-on; |
| 598 | regulator-max-microvolt = <3300000>; |
| 599 | regulator-min-microvolt = <1800000>; |
| 600 | }; |
| 601 | }; |
| 602 | }; |
| 603 | |
| 604 | codec: sgtl5000@a { |
| 605 | compatible = "fsl,sgtl5000"; |
| 606 | #sound-dai-cells = <0>; |
| 607 | clocks = <&clks IMX6QDL_CLK_CKO>; |
| 608 | pinctrl-names = "default"; |
| 609 | pinctrl-0 = <&pinctrl_sgtl5000>; |
| 610 | reg = <0x0a>; |
| 611 | VDDA-supply = <®_module_3v3_audio>; |
| 612 | VDDIO-supply = <®_module_3v3>; |
| 613 | VDDD-supply = <&vgen4_reg>; |
| 614 | }; |
| 615 | |
| 616 | /* STMPE811 touch screen controller */ |
| 617 | stmpe811@41 { |
| 618 | compatible = "st,stmpe811"; |
| 619 | blocks = <0x5>; |
| 620 | id = <0>; |
| 621 | interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| 622 | interrupt-controller; |
| 623 | interrupt-parent = <&gpio4>; |
| 624 | irq-trigger = <0x1>; |
| 625 | pinctrl-names = "default"; |
| 626 | pinctrl-0 = <&pinctrl_touch_int>; |
| 627 | reg = <0x41>; |
| 628 | /* 3.25 MHz ADC clock speed */ |
| 629 | st,adc-freq = <1>; |
| 630 | /* 12-bit ADC */ |
| 631 | st,mod-12b = <1>; |
| 632 | /* internal ADC reference */ |
| 633 | st,ref-sel = <0>; |
| 634 | /* ADC conversion time: 80 clocks */ |
| 635 | st,sample-time = <4>; |
| 636 | |
| 637 | stmpe_ts: stmpe_touchscreen { |
| 638 | compatible = "st,stmpe-ts"; |
| 639 | /* 8 sample average control */ |
| 640 | st,ave-ctrl = <3>; |
| 641 | /* 7 length fractional part in z */ |
| 642 | st,fraction-z = <7>; |
| 643 | /* |
| 644 | * 50 mA typical 80 mA max touchscreen drivers |
| 645 | * current limit value |
| 646 | */ |
| 647 | st,i-drive = <1>; |
| 648 | /* 1 ms panel driver settling time */ |
| 649 | st,settling = <3>; |
| 650 | /* 5 ms touch detect interrupt delay */ |
| 651 | st,touch-det-delay = <5>; |
| 652 | status = "disabled"; |
| 653 | }; |
| 654 | |
| 655 | stmpe_adc: stmpe_adc { |
| 656 | compatible = "st,stmpe-adc"; |
| 657 | #io-channel-cells = <1>; |
| 658 | /* forbid to use ADC channels 3-0 (touch) */ |
| 659 | st,norequest-mask = <0x0F>; |
| 660 | }; |
| 661 | }; |
| 662 | }; |
| 663 | |
| 664 | /* |
| 665 | * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| 666 | * board) |
| 667 | */ |
| 668 | &i2c3 { |
| 669 | clock-frequency = <100000>; |
| 670 | pinctrl-names = "default", "gpio"; |
| 671 | pinctrl-0 = <&pinctrl_i2c3>; |
| 672 | pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| 673 | scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 674 | sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 675 | status = "disabled"; |
| 676 | |
| 677 | adv_7280: adv7280@21 { |
| 678 | compatible = "adi,adv7280"; |
| 679 | adv,force-bt656-4; |
| 680 | pinctrl-names = "default"; |
| 681 | pinctrl-0 = <&pinctrl_ipu1_csi0>; |
| 682 | reg = <0x21>; |
| 683 | status = "disabled"; |
| 684 | |
| 685 | port { |
| 686 | adv7280_to_ipu1_csi0_mux: endpoint { |
| 687 | bus-width = <8>; |
| 688 | remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; |
| 689 | }; |
| 690 | }; |
| 691 | }; |
| 692 | |
| 693 | ov5640_csi_cam: ov5640_mipi@3c { |
| 694 | compatible = "ovti,ov5640"; |
| 695 | AVDD-supply = <®_ov5640_2v8_a_vdd>; |
| 696 | DOVDD-supply = <®_ov5640_1v8_d_o_vdd>; |
| 697 | DVDD-supply = <®_ov5640_1v8_d_o_vdd>; |
| 698 | clock-names = "xclk"; |
| 699 | clocks = <&clks IMX6QDL_CLK_CKO2>; |
| 700 | pinctrl-names = "default"; |
| 701 | pinctrl-0 = <&pinctrl_cam_mclk>; |
| 702 | /* These GPIOs are muxed with the iomuxc node */ |
| 703 | powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; |
| 704 | reg = <0x3c>; |
| 705 | reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; |
| 706 | status = "disabled"; |
| 707 | |
| 708 | port { |
| 709 | ov5640_to_mipi_csi2: endpoint { |
| 710 | clock-lanes = <0>; |
| 711 | data-lanes = <1 2>; |
| 712 | remote-endpoint = <&mipi_csi_from_ov5640>; |
| 713 | }; |
| 714 | }; |
| 715 | }; |
| 716 | }; |
| 717 | |
| 718 | &ipu1_di1_disp1 { |
| 719 | remote-endpoint = <&lcd_display_in>; |
| 720 | }; |
| 721 | |
| 722 | &ldb { |
| 723 | lvds-channel@0 { |
| 724 | port@4 { |
| 725 | reg = <4>; |
| 726 | |
| 727 | lvds0_out: endpoint { |
| 728 | remote-endpoint = <&lvds_panel_in>; |
| 729 | }; |
| 730 | }; |
| 731 | }; |
| 732 | |
| 733 | lvds-channel@1 { |
| 734 | fsl,data-mapping = "spwg"; |
| 735 | fsl,data-width = <18>; |
| 736 | |
| 737 | port@4 { |
| 738 | reg = <4>; |
| 739 | |
| 740 | lvds1_out: endpoint { |
| 741 | }; |
| 742 | }; |
| 743 | }; |
| 744 | }; |
| 745 | |
| 746 | &mipi_csi { |
| 747 | #address-cells = <1>; |
| 748 | #size-cells = <0>; |
| 749 | status = "disabled"; |
| 750 | |
| 751 | port@0 { |
| 752 | reg = <0>; |
| 753 | |
| 754 | mipi_csi_from_ov5640: endpoint { |
| 755 | clock-lanes = <0>; |
| 756 | data-lanes = <1 2>; |
| 757 | remote-endpoint = <&ov5640_to_mipi_csi2>; |
| 758 | }; |
| 759 | }; |
| 760 | }; |
| 761 | |
| 762 | &pwm1 { |
| 763 | pinctrl-names = "default"; |
| 764 | pinctrl-0 = <&pinctrl_pwm1>; |
| 765 | status = "disabled"; |
| 766 | }; |
| 767 | |
| 768 | &pwm2 { |
| 769 | pinctrl-names = "default"; |
| 770 | pinctrl-0 = <&pinctrl_pwm2>; |
| 771 | status = "disabled"; |
| 772 | }; |
| 773 | |
| 774 | &pwm3 { |
| 775 | pinctrl-names = "default"; |
| 776 | pinctrl-0 = <&pinctrl_pwm3>; |
| 777 | status = "disabled"; |
| 778 | }; |
| 779 | |
| 780 | &pwm4 { |
| 781 | pinctrl-names = "default"; |
| 782 | pinctrl-0 = <&pinctrl_pwm4>; |
| 783 | status = "disabled"; |
| 784 | }; |
| 785 | |
| 786 | &spdif { |
| 787 | pinctrl-names = "default"; |
| 788 | pinctrl-0 = <&pinctrl_spdif>; |
| 789 | status = "disabled"; |
| 790 | }; |
| 791 | |
| 792 | &ssi1 { |
| 793 | status = "okay"; |
| 794 | }; |
| 795 | |
| 796 | &uart1 { |
| 797 | fsl,dte-mode; |
| 798 | pinctrl-names = "default"; |
| 799 | pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; |
| 800 | uart-has-rtscts; |
| 801 | status = "disabled"; |
| 802 | }; |
| 803 | |
| 804 | &uart2 { |
| 805 | fsl,dte-mode; |
| 806 | pinctrl-names = "default"; |
| 807 | pinctrl-0 = <&pinctrl_uart2_dte>; |
| 808 | uart-has-rtscts; |
| 809 | status = "disabled"; |
| 810 | }; |
| 811 | |
| 812 | &uart4 { |
| 813 | fsl,dte-mode; |
| 814 | pinctrl-names = "default"; |
| 815 | pinctrl-0 = <&pinctrl_uart4_dte>; |
| 816 | status = "disabled"; |
| 817 | }; |
| 818 | |
| 819 | &uart5 { |
| 820 | fsl,dte-mode; |
| 821 | pinctrl-names = "default"; |
| 822 | pinctrl-0 = <&pinctrl_uart5_dte>; |
| 823 | status = "disabled"; |
| 824 | }; |
| 825 | |
| 826 | &usbotg { |
| 827 | disable-over-current; |
| 828 | pinctrl-names = "default"; |
| 829 | pinctrl-0 = <&pinctrl_usbotg>; |
| 830 | status = "disabled"; |
| 831 | }; |
| 832 | |
| 833 | /* MMC1 */ |
| 834 | &usdhc1 { |
| 835 | bus-width = <8>; |
| 836 | cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; |
| 837 | disable-wp; |
| 838 | no-1-8-v; |
| 839 | pinctrl-names = "default"; |
| 840 | pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; |
| 841 | vqmmc-supply = <®_module_3v3>; |
| 842 | status = "disabled"; |
| 843 | }; |
| 844 | |
| 845 | /* SD1 */ |
| 846 | &usdhc2 { |
| 847 | bus-width = <4>; |
| 848 | disable-wp; |
| 849 | no-1-8-v; |
| 850 | pinctrl-names = "default"; |
| 851 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 852 | vqmmc-supply = <®_module_3v3>; |
| 853 | status = "disabled"; |
| 854 | }; |
| 855 | |
| 856 | /* eMMC */ |
| 857 | &usdhc3 { |
| 858 | bus-width = <8>; |
| 859 | no-1-8-v; |
| 860 | non-removable; |
| 861 | pinctrl-names = "default"; |
| 862 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 863 | vqmmc-supply = <®_module_3v3>; |
| 864 | status = "okay"; |
| 865 | }; |
| 866 | |
| 867 | &weim { |
| 868 | status = "disabled"; |
| 869 | }; |
| 870 | |
| 871 | &iomuxc { |
| 872 | /* Mux the Apalis GPIOs */ |
| 873 | pinctrl-names = "default"; |
| 874 | pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 |
| 875 | &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 |
| 876 | &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 |
| 877 | &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 |
| 878 | >; |
| 879 | |
| 880 | pinctrl_apalis_gpio1: apalisgpio1grp { |
| 881 | fsl,pins = < |
| 882 | MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 |
| 883 | >; |
| 884 | }; |
| 885 | |
| 886 | pinctrl_apalis_gpio2: apalisgpio2grp { |
| 887 | fsl,pins = < |
| 888 | MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 |
| 889 | >; |
| 890 | }; |
| 891 | |
| 892 | pinctrl_apalis_gpio3: apalisgpio3grp { |
| 893 | fsl,pins = < |
| 894 | MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 |
| 895 | >; |
| 896 | }; |
| 897 | |
| 898 | pinctrl_apalis_gpio4: apalisgpio4grp { |
| 899 | fsl,pins = < |
| 900 | MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 |
| 901 | >; |
| 902 | }; |
| 903 | |
| 904 | pinctrl_apalis_gpio5: apalisgpio5grp { |
| 905 | fsl,pins = < |
| 906 | MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 |
| 907 | >; |
| 908 | }; |
| 909 | |
| 910 | pinctrl_apalis_gpio6: apalisgpio6grp { |
| 911 | fsl,pins = < |
| 912 | MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 |
| 913 | >; |
| 914 | }; |
| 915 | |
| 916 | pinctrl_apalis_gpio7: apalisgpio7grp { |
| 917 | fsl,pins = < |
| 918 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 |
| 919 | >; |
| 920 | }; |
| 921 | |
| 922 | pinctrl_apalis_gpio8: apalisgpio8grp { |
| 923 | fsl,pins = < |
| 924 | MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 |
| 925 | >; |
| 926 | }; |
| 927 | |
| 928 | pinctrl_audmux: audmuxgrp { |
| 929 | fsl,pins = < |
| 930 | MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 |
| 931 | MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 |
| 932 | MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 |
| 933 | MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 |
| 934 | >; |
| 935 | }; |
| 936 | |
| 937 | pinctrl_cam_mclk: cammclkgrp { |
| 938 | fsl,pins = < |
| 939 | /* CAM sys_mclk */ |
| 940 | MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 |
| 941 | >; |
| 942 | }; |
| 943 | |
| 944 | pinctrl_ecspi1: ecspi1grp { |
| 945 | fsl,pins = < |
| 946 | MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 |
| 947 | MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 |
| 948 | MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 |
| 949 | /* SPI1 cs */ |
| 950 | MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 |
| 951 | >; |
| 952 | }; |
| 953 | |
| 954 | pinctrl_ecspi2: ecspi2grp { |
| 955 | fsl,pins = < |
| 956 | MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 |
| 957 | MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 |
| 958 | MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 |
| 959 | /* SPI2 cs */ |
| 960 | MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 |
| 961 | >; |
| 962 | }; |
| 963 | |
| 964 | pinctrl_enet: enetgrp { |
| 965 | fsl,pins = < |
| 966 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| 967 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| 968 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 |
| 969 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 |
| 970 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 |
| 971 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 |
| 972 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 |
| 973 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 |
| 974 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| 975 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 976 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 977 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 978 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 979 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 980 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| 981 | /* Ethernet PHY reset */ |
| 982 | MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 |
| 983 | /* Ethernet PHY interrupt */ |
| 984 | MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 |
| 985 | >; |
| 986 | }; |
| 987 | |
| 988 | pinctrl_flexcan1_default: flexcan1defgrp { |
| 989 | fsl,pins = < |
| 990 | MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |
| 991 | MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 |
| 992 | >; |
| 993 | }; |
| 994 | |
| 995 | pinctrl_flexcan1_sleep: flexcan1slpgrp { |
| 996 | fsl,pins = < |
| 997 | MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 |
| 998 | MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 |
| 999 | >; |
| 1000 | }; |
| 1001 | |
| 1002 | pinctrl_flexcan2_default: flexcan2defgrp { |
| 1003 | fsl,pins = < |
| 1004 | MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| 1005 | MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| 1006 | >; |
| 1007 | }; |
| 1008 | pinctrl_flexcan2_sleep: flexcan2slpgrp { |
| 1009 | fsl,pins = < |
| 1010 | MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 |
| 1011 | MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 |
| 1012 | >; |
| 1013 | }; |
| 1014 | |
| 1015 | pinctrl_gpio_bl_on: gpioblongrp { |
| 1016 | fsl,pins = < |
| 1017 | MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 |
| 1018 | >; |
| 1019 | }; |
| 1020 | |
| 1021 | pinctrl_gpio_keys: gpio1io04grp { |
| 1022 | fsl,pins = < |
| 1023 | /* Power button */ |
| 1024 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| 1025 | >; |
| 1026 | }; |
| 1027 | |
| 1028 | pinctrl_hdmi_cec: hdmicecgrp { |
| 1029 | fsl,pins = < |
| 1030 | MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| 1031 | >; |
| 1032 | }; |
| 1033 | |
| 1034 | pinctrl_hdmi_ddc: hdmiddcgrp { |
| 1035 | fsl,pins = < |
| 1036 | MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 |
| 1037 | MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 |
| 1038 | >; |
| 1039 | }; |
| 1040 | |
| 1041 | pinctrl_i2c1: i2c1grp { |
| 1042 | fsl,pins = < |
| 1043 | MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| 1044 | MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| 1045 | >; |
| 1046 | }; |
| 1047 | |
| 1048 | pinctrl_i2c1_gpio: i2c1gpiogrp { |
| 1049 | fsl,pins = < |
| 1050 | MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 |
| 1051 | MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 |
| 1052 | >; |
| 1053 | }; |
| 1054 | |
| 1055 | pinctrl_i2c2: i2c2grp { |
| 1056 | fsl,pins = < |
| 1057 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 1058 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 1059 | >; |
| 1060 | }; |
| 1061 | |
| 1062 | pinctrl_i2c2_gpio: i2c2gpiogrp { |
| 1063 | fsl,pins = < |
| 1064 | MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 |
| 1065 | MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 |
| 1066 | >; |
| 1067 | }; |
| 1068 | |
| 1069 | pinctrl_i2c3: i2c3grp { |
| 1070 | fsl,pins = < |
| 1071 | MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| 1072 | MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| 1073 | >; |
| 1074 | }; |
| 1075 | |
| 1076 | pinctrl_i2c3_gpio: i2c3gpiogrp { |
| 1077 | fsl,pins = < |
| 1078 | MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 |
| 1079 | MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 |
| 1080 | >; |
| 1081 | }; |
| 1082 | |
| 1083 | pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ |
| 1084 | fsl,pins = < |
| 1085 | MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 |
| 1086 | MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 |
| 1087 | MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 |
| 1088 | MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 |
| 1089 | MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 |
| 1090 | MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 |
| 1091 | MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 |
| 1092 | MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 |
| 1093 | MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 |
| 1094 | MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 |
| 1095 | MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 |
| 1096 | >; |
| 1097 | }; |
| 1098 | |
| 1099 | pinctrl_ipu1_lcdif: ipu1lcdifgrp { |
| 1100 | fsl,pins = < |
| 1101 | MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 |
| 1102 | /* DE */ |
| 1103 | MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 |
| 1104 | /* HSync */ |
| 1105 | MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 |
| 1106 | /* VSync */ |
| 1107 | MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 |
| 1108 | MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 |
| 1109 | MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 |
| 1110 | MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 |
| 1111 | MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 |
| 1112 | MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 |
| 1113 | MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 |
| 1114 | MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 |
| 1115 | MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 |
| 1116 | MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 |
| 1117 | MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 |
| 1118 | MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 |
| 1119 | MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 |
| 1120 | MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 |
| 1121 | MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 |
| 1122 | MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 |
| 1123 | MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 |
| 1124 | MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 |
| 1125 | MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 |
| 1126 | MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 |
| 1127 | MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 |
| 1128 | MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 |
| 1129 | MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 |
| 1130 | MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 |
| 1131 | MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 |
| 1132 | >; |
| 1133 | }; |
| 1134 | |
| 1135 | pinctrl_ipu2_vdac: ipu2vdacgrp { |
| 1136 | fsl,pins = < |
| 1137 | MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 |
| 1138 | MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 |
| 1139 | MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 |
| 1140 | MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 |
| 1141 | MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 |
| 1142 | MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 |
| 1143 | MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 |
| 1144 | MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 |
| 1145 | MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 |
| 1146 | MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 |
| 1147 | MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 |
| 1148 | MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 |
| 1149 | MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 |
| 1150 | MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 |
| 1151 | MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 |
| 1152 | MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 |
| 1153 | MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 |
| 1154 | MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 |
| 1155 | MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 |
| 1156 | MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 |
| 1157 | >; |
| 1158 | }; |
| 1159 | |
| 1160 | pinctrl_mmc_cd: mmccdgrp { |
| 1161 | fsl,pins = < |
| 1162 | /* MMC1 CD */ |
| 1163 | MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 |
| 1164 | >; |
| 1165 | }; |
| 1166 | |
| 1167 | pinctrl_pwm1: pwm1grp { |
| 1168 | fsl,pins = < |
| 1169 | MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 |
| 1170 | >; |
| 1171 | }; |
| 1172 | |
| 1173 | pinctrl_pwm2: pwm2grp { |
| 1174 | fsl,pins = < |
| 1175 | MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| 1176 | >; |
| 1177 | }; |
| 1178 | |
| 1179 | pinctrl_pwm3: pwm3grp { |
| 1180 | fsl,pins = < |
| 1181 | MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| 1182 | >; |
| 1183 | }; |
| 1184 | |
| 1185 | pinctrl_pwm4: pwm4grp { |
| 1186 | fsl,pins = < |
| 1187 | MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 |
| 1188 | >; |
| 1189 | }; |
| 1190 | |
| 1191 | pinctrl_regulator_usbh_pwr: regusbhpwrgrp { |
| 1192 | fsl,pins = < |
| 1193 | /* USBH_EN */ |
| 1194 | MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 |
| 1195 | >; |
| 1196 | }; |
| 1197 | |
| 1198 | pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { |
| 1199 | fsl,pins = < |
| 1200 | /* USBH_HUB_EN */ |
| 1201 | MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 |
| 1202 | >; |
| 1203 | }; |
| 1204 | |
| 1205 | pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { |
| 1206 | fsl,pins = < |
| 1207 | /* USBO1 power en */ |
| 1208 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 |
| 1209 | >; |
| 1210 | }; |
| 1211 | |
| 1212 | pinctrl_reset_moci: resetmocigrp { |
| 1213 | fsl,pins = < |
| 1214 | /* RESET_MOCI control */ |
| 1215 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 |
| 1216 | >; |
| 1217 | }; |
| 1218 | |
| 1219 | pinctrl_sd_cd: sdcdgrp { |
| 1220 | fsl,pins = < |
| 1221 | /* SD1 CD */ |
| 1222 | MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 |
| 1223 | >; |
| 1224 | }; |
| 1225 | |
| 1226 | pinctrl_sgtl5000: sgtl5000grp { |
| 1227 | fsl,pins = < |
| 1228 | MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 |
| 1229 | >; |
| 1230 | }; |
| 1231 | |
| 1232 | pinctrl_spdif: spdifgrp { |
| 1233 | fsl,pins = < |
| 1234 | MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 |
| 1235 | MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 |
| 1236 | >; |
| 1237 | }; |
| 1238 | |
| 1239 | pinctrl_touch_int: touchintgrp { |
| 1240 | fsl,pins = < |
| 1241 | /* STMPE811 interrupt */ |
| 1242 | MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| 1243 | >; |
| 1244 | }; |
| 1245 | |
| 1246 | /* Additional DTR, DSR, DCD */ |
| 1247 | pinctrl_uart1_ctrl: uart1ctrlgrp { |
| 1248 | fsl,pins = < |
| 1249 | MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 |
| 1250 | MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 |
| 1251 | MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 |
| 1252 | >; |
| 1253 | }; |
| 1254 | |
| 1255 | pinctrl_uart1_dce: uart1dcegrp { |
| 1256 | fsl,pins = < |
| 1257 | MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| 1258 | MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| 1259 | >; |
| 1260 | }; |
| 1261 | |
| 1262 | /* DTE mode */ |
| 1263 | pinctrl_uart1_dte: uart1dtegrp { |
| 1264 | fsl,pins = < |
| 1265 | MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 |
| 1266 | MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 |
| 1267 | MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 |
| 1268 | MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 |
| 1269 | >; |
| 1270 | }; |
| 1271 | |
| 1272 | pinctrl_uart2_dce: uart2dcegrp { |
| 1273 | fsl,pins = < |
| 1274 | MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| 1275 | MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| 1276 | >; |
| 1277 | }; |
| 1278 | |
| 1279 | /* DTE mode */ |
| 1280 | pinctrl_uart2_dte: uart2dtegrp { |
| 1281 | fsl,pins = < |
| 1282 | MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 |
| 1283 | MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 |
| 1284 | MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 |
| 1285 | MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 |
| 1286 | >; |
| 1287 | }; |
| 1288 | |
| 1289 | pinctrl_uart4_dce: uart4dcegrp { |
| 1290 | fsl,pins = < |
| 1291 | MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| 1292 | MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| 1293 | >; |
| 1294 | }; |
| 1295 | |
| 1296 | /* DTE mode */ |
| 1297 | pinctrl_uart4_dte: uart4dtegrp { |
| 1298 | fsl,pins = < |
| 1299 | MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 |
| 1300 | MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 |
| 1301 | >; |
| 1302 | }; |
| 1303 | |
| 1304 | pinctrl_uart5_dce: uart5dcegrp { |
| 1305 | fsl,pins = < |
| 1306 | MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| 1307 | MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| 1308 | >; |
| 1309 | }; |
| 1310 | |
| 1311 | /* DTE mode */ |
| 1312 | pinctrl_uart5_dte: uart5dtegrp { |
| 1313 | fsl,pins = < |
| 1314 | MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 |
| 1315 | MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 |
| 1316 | >; |
| 1317 | }; |
| 1318 | |
| 1319 | pinctrl_usbotg: usbotggrp { |
| 1320 | fsl,pins = < |
| 1321 | MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| 1322 | >; |
| 1323 | }; |
| 1324 | |
| 1325 | pinctrl_usdhc1_4bit: usdhc1-4bitgrp { |
| 1326 | fsl,pins = < |
| 1327 | MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| 1328 | MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| 1329 | MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| 1330 | MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| 1331 | MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| 1332 | MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| 1333 | >; |
| 1334 | }; |
| 1335 | |
| 1336 | pinctrl_usdhc1_8bit: usdhc1-8bitgrp { |
| 1337 | fsl,pins = < |
| 1338 | MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 |
| 1339 | MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 |
| 1340 | MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 |
| 1341 | MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 |
| 1342 | >; |
| 1343 | }; |
| 1344 | |
| 1345 | pinctrl_usdhc2: usdhc2grp { |
| 1346 | fsl,pins = < |
| 1347 | MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 |
| 1348 | MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 |
| 1349 | MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 |
| 1350 | MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 |
| 1351 | MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 |
| 1352 | MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 |
| 1353 | >; |
| 1354 | }; |
| 1355 | |
| 1356 | pinctrl_usdhc3: usdhc3grp { |
| 1357 | fsl,pins = < |
| 1358 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 1359 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 1360 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 1361 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 1362 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 1363 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 1364 | MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| 1365 | MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| 1366 | MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| 1367 | MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| 1368 | /* eMMC reset */ |
| 1369 | MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 |
| 1370 | >; |
| 1371 | }; |
| 1372 | }; |