blob: 7764288811718d02cd0d27cda108a26e75a5588f [file] [log] [blame]
Pali Roháred407be2012-10-29 07:54:01 +00001/*
2 * (C) Copyright 2012
3 * Ивайло Димитров <freemangordon@abv.bg>
4 *
5 * (C) Copyright 2011-2012
6 * Pali Rohár <pali.rohar@gmail.com>
7 *
8 * (C) Copyright 2010
9 * Alistair Buxton <a.j.buxton@gmail.com>
10 *
11 * Derived from Beagle Board and 3430 SDP code:
12 * (C) Copyright 2004-2008
13 * Texas Instruments, <www.ti.com>
14 *
15 * Author :
16 * Sunil Kumar <sunilsaini05@gmail.com>
17 * Shashi Ranjan <shashiranjanmca05@gmail.com>
18 *
19 * Richard Woodruff <r-woodruff2@ti.com>
20 * Syed Mohammed Khasim <khasim@ti.com>
21 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020022 * SPDX-License-Identifier: GPL-2.0+
Pali Roháred407be2012-10-29 07:54:01 +000023 */
24
25#include <common.h>
26#include <watchdog.h>
27#include <malloc.h>
28#include <twl4030.h>
29#include <i2c.h>
30#include <video_fb.h>
31#include <asm/io.h>
32#include <asm/setup.h>
33#include <asm/bitops.h>
34#include <asm/mach-types.h>
35#include <asm/arch/mux.h>
36#include <asm/arch/sys_proto.h>
37#include <asm/arch/mmc_host_def.h>
38
39#include "rx51.h"
40#include "tag_omap.h"
41
42DECLARE_GLOBAL_DATA_PTR;
43
44GraphicDevice gdev;
45
46const omap3_sysinfo sysinfo = {
47 DDR_STACKED,
48 "Nokia RX-51",
49 "OneNAND"
50};
51
52/* This structure contains default omap tags needed for booting Maemo 5 */
53static struct tag_omap omap[] = {
54 OMAP_TAG_UART_CONFIG(0x04),
55 OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200),
56 OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18),
57 OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0),
58 OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0),
59 OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0),
60 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0),
61 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0),
62 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0),
63 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0),
64 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0),
65 OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0),
66 OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0),
67 OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0),
68 OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0),
69 OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0),
70 OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0),
71 OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1),
72 OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL,
73 PART1_OFFS, PART1_MASK),
74 OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL,
75 PART2_OFFS, PART2_MASK),
76 OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL,
77 PART3_OFFS, PART3_MASK),
78 OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL,
79 PART4_OFFS, PART4_MASK),
80 OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL,
81 PART5_OFFS, PART5_MASK),
82 OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL,
83 PART6_OFFS, PART6_MASK),
84 OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"),
85 OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"),
86 OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"),
87 OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"),
88 OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"),
89 { }
90};
91
92static char *boot_reason_ptr;
93static char *hw_build_ptr;
94static char *nolo_version_ptr;
95static char *boot_mode_ptr;
96
97/*
98 * Routine: init_omap_tags
99 * Description: Initialize pointers to values in tag_omap
100 */
101static void init_omap_tags(void)
102{
103 char *component;
104 char *version;
105 int i = 0;
106 while (omap[i].hdr.tag) {
107 switch (omap[i].hdr.tag) {
108 case OMAP_TAG_BOOT_REASON:
109 boot_reason_ptr = omap[i].u.boot_reason.reason_str;
110 break;
111 case OMAP_TAG_VERSION_STR:
112 component = omap[i].u.version.component;
113 version = omap[i].u.version.version;
114 if (strcmp(component, "hw-build") == 0)
115 hw_build_ptr = version;
116 else if (strcmp(component, "nolo") == 0)
117 nolo_version_ptr = version;
118 else if (strcmp(component, "boot-mode") == 0)
119 boot_mode_ptr = version;
120 break;
121 default:
122 break;
123 }
124 i++;
125 }
126}
127
128static void reuse_omap_atags(struct tag_omap *t)
129{
130 char *component;
131 char *version;
132 while (t->hdr.tag) {
133 switch (t->hdr.tag) {
134 case OMAP_TAG_BOOT_REASON:
135 memset(boot_reason_ptr, 0, 12);
136 strcpy(boot_reason_ptr, t->u.boot_reason.reason_str);
137 break;
138 case OMAP_TAG_VERSION_STR:
139 component = t->u.version.component;
140 version = t->u.version.version;
141 if (strcmp(component, "hw-build") == 0) {
142 memset(hw_build_ptr, 0, 12);
143 strcpy(hw_build_ptr, version);
144 } else if (strcmp(component, "nolo") == 0) {
145 memset(nolo_version_ptr, 0, 12);
146 strcpy(nolo_version_ptr, version);
147 } else if (strcmp(component, "boot-mode") == 0) {
148 memset(boot_mode_ptr, 0, 12);
149 strcpy(boot_mode_ptr, version);
150 }
151 break;
152 default:
153 break;
154 }
155 t = tag_omap_next(t);
156 }
157}
158
159/*
160 * Routine: reuse_atags
161 * Description: Reuse atags from previous bootloader.
162 * Reuse only only HW build, boot reason, boot mode and nolo
163 */
164static void reuse_atags(void)
165{
166 struct tag *t = (struct tag *)gd->bd->bi_boot_params;
167
168 /* First tag must be ATAG_CORE */
169 if (t->hdr.tag != ATAG_CORE)
170 return;
171
172 if (!boot_reason_ptr || !hw_build_ptr)
173 return;
174
175 /* Last tag must be ATAG_NONE */
176 while (t->hdr.tag != ATAG_NONE) {
177 switch (t->hdr.tag) {
178 case ATAG_REVISION:
179 memset(hw_build_ptr, 0, 12);
180 sprintf(hw_build_ptr, "%x", t->u.revision.rev);
181 break;
182 case ATAG_BOARD:
183 reuse_omap_atags((struct tag_omap *)&t->u);
184 break;
185 default:
186 break;
187 }
188 t = tag_next(t);
189 }
190}
191
192/*
193 * Routine: board_init
194 * Description: Early hardware init.
195 */
196int board_init(void)
197{
198 /* in SRAM or SDRAM, finish GPMC */
199 gpmc_init();
200 /* boot param addr */
201 gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
202 return 0;
203}
204
205/*
206 * Routine: get_board_revision
207 * Description: Return board revision.
208 */
209u32 get_board_rev(void)
210{
211 return simple_strtol(hw_build_ptr, NULL, 16);
212}
213
214/*
215 * Routine: setup_board_tags
216 * Description: Append board specific boot tags.
217 */
218void setup_board_tags(struct tag **in_params)
219{
220 int setup_console_atag;
221 char *setup_boot_reason_atag;
222 char *setup_boot_mode_atag;
223 char *str;
224 int i;
225 int size;
226 int total_size;
227 struct tag *params;
228 struct tag_omap *t;
229
230 params = (struct tag *)gd->bd->bi_boot_params;
231
232 params->u.core.flags = 0x0;
233 params->u.core.pagesize = 0x1000;
234 params->u.core.rootdev = 0x0;
235
236 /* append omap atag only if env setup_omap_atag is set to 1 */
Simon Glass00caae62017-08-03 12:22:12 -0600237 str = env_get("setup_omap_atag");
Pali Roháred407be2012-10-29 07:54:01 +0000238 if (!str || str[0] != '1')
239 return;
240
Simon Glass00caae62017-08-03 12:22:12 -0600241 str = env_get("setup_console_atag");
Pali Roháred407be2012-10-29 07:54:01 +0000242 if (str && str[0] == '1')
243 setup_console_atag = 1;
244 else
245 setup_console_atag = 0;
246
Simon Glass00caae62017-08-03 12:22:12 -0600247 setup_boot_reason_atag = env_get("setup_boot_reason_atag");
248 setup_boot_mode_atag = env_get("setup_boot_mode_atag");
Pali Roháred407be2012-10-29 07:54:01 +0000249
250 params = *in_params;
251 t = (struct tag_omap *)&params->u;
252 total_size = sizeof(struct tag_header);
253
254 for (i = 0; omap[i].hdr.tag; i++) {
255
256 /* skip serial console tag */
257 if (!setup_console_atag &&
258 omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE)
259 continue;
260
261 size = omap[i].hdr.size + sizeof(struct tag_omap_header);
262 memcpy(t, &omap[i], size);
263
264 /* set uart tag to 0 - disable serial console */
265 if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART)
266 t->u.uart.enabled_uarts = 0;
267
268 /* change boot reason */
269 if (setup_boot_reason_atag &&
270 omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) {
271 memset(t->u.boot_reason.reason_str, 0, 12);
272 strcpy(t->u.boot_reason.reason_str,
273 setup_boot_reason_atag);
274 }
275
276 /* change boot mode */
277 if (setup_boot_mode_atag &&
278 omap[i].hdr.tag == OMAP_TAG_VERSION_STR &&
279 strcmp(omap[i].u.version.component, "boot-mode") == 0) {
280 memset(t->u.version.version, 0, 12);
281 strcpy(t->u.version.version, setup_boot_mode_atag);
282 }
283
284 total_size += size;
285 t = tag_omap_next(t);
286
287 }
288
289 params->hdr.tag = ATAG_BOARD;
290 params->hdr.size = total_size >> 2;
291 params = tag_next(params);
292
293 *in_params = params;
294}
295
296/*
297 * Routine: video_hw_init
298 * Description: Set up the GraphicDevice depending on sys_boot.
299 */
300void *video_hw_init(void)
301{
302 /* fill in Graphic Device */
303 gdev.frameAdrs = 0x8f9c0000;
304 gdev.winSizeX = 800;
305 gdev.winSizeY = 480;
306 gdev.gdfBytesPP = 2;
307 gdev.gdfIndex = GDF_16BIT_565RGB;
308 memset((void *)gdev.frameAdrs, 0, 0xbb800);
309 return (void *) &gdev;
310}
311
312/*
313 * Routine: twl4030_regulator_set_mode
314 * Description: Set twl4030 regulator mode over i2c powerbus.
315 */
316static void twl4030_regulator_set_mode(u8 id, u8 mode)
317{
318 u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000319 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
320 TWL4030_PM_MASTER_PB_WORD_MSB, msg >> 8);
321 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
322 TWL4030_PM_MASTER_PB_WORD_LSB, msg & 0xff);
Pali Roháred407be2012-10-29 07:54:01 +0000323}
324
325static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
326{
327 u32 i, num_params = *parameters;
328 u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
329
330 /*
331 * copy the parameters to an un-cached area to avoid coherency
332 * issues
333 */
334 for (i = 0; i < num_params; i++) {
335 __raw_writel(*parameters, sram_scratch_space);
336 parameters++;
337 sram_scratch_space++;
338 }
339
340 /* Now make the PPA call */
341 do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
342}
343
Nishanth Menoncdef0b32015-03-09 17:12:09 -0500344void omap3_set_aux_cr_secure(u32 acr)
345{
346 struct emu_hal_params_rx51 emu_romcode_params = { 0, };
347
348 emu_romcode_params.num_params = 2;
349 emu_romcode_params.param1 = acr;
350
351 omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
352 (u32 *)&emu_romcode_params);
353}
354
Pali Roháred407be2012-10-29 07:54:01 +0000355/*
356 * Routine: omap3_update_aux_cr_secure_rx51
357 * Description: Modify the contents Auxiliary Control Register.
358 * Parameters:
359 * set_bits - bits to set in ACR
360 * clr_bits - bits to clear in ACR
361 */
362static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
363{
Pali Roháred407be2012-10-29 07:54:01 +0000364 u32 acr;
365
366 /* Read ACR */
367 asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
368 acr &= ~clear_bits;
369 acr |= set_bits;
Nishanth Menoncdef0b32015-03-09 17:12:09 -0500370 omap3_set_aux_cr_secure(acr);
Pali Roháred407be2012-10-29 07:54:01 +0000371}
372
373/*
374 * Routine: misc_init_r
375 * Description: Configure board specific parts.
376 */
377int misc_init_r(void)
378{
379 char buf[12];
380 u8 state;
381
382 /* reset lp5523 led */
383 i2c_set_bus_num(1);
384 state = 0xff;
385 i2c_write(0x32, 0x3d, 1, &state, 1);
386 i2c_set_bus_num(0);
387
388 /* initialize twl4030 power managment */
389 twl4030_power_init();
390
391 /* set VSIM to 1.8V */
392 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
393 TWL4030_PM_RECEIVER_VSIM_VSEL_18,
394 TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
395 TWL4030_PM_RECEIVER_DEV_GRP_P1);
396
397 /* store I2C access state */
Nishanth Menonb29c2f02013-03-26 05:20:50 +0000398 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
399 &state);
Pali Roháred407be2012-10-29 07:54:01 +0000400
401 /* enable I2C access to powerbus (needed for twl4030 regulator) */
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000402 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
403 0x02);
Pali Roháred407be2012-10-29 07:54:01 +0000404
405 /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
406 twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
407 twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE);
408 twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
409
410 /* restore I2C access state */
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000411 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
412 state);
Pali Roháred407be2012-10-29 07:54:01 +0000413
414 /* set env variable attkernaddr for relocated kernel */
415 sprintf(buf, "%#x", KERNEL_ADDRESS);
Simon Glass382bee52017-08-03 12:22:09 -0600416 env_set("attkernaddr", buf);
Pali Roháred407be2012-10-29 07:54:01 +0000417
418 /* initialize omap tags */
419 init_omap_tags();
420
421 /* reuse atags from previous bootloader */
422 reuse_atags();
423
Paul Kocialkowski679f82c2015-08-27 19:37:13 +0200424 omap_die_id_display();
Pali Roháred407be2012-10-29 07:54:01 +0000425 print_cpuinfo();
426
427 /*
428 * Cortex-A8(r1p0..r1p2) errata 430973 workaround
429 * Set IBE bit in Auxiliary Control Register
Pali Rohár8cda4132015-01-08 10:11:40 +0100430 *
431 * Call this routine only on real secure device
432 * Qemu does not implement secure PPA and crash
Pali Roháred407be2012-10-29 07:54:01 +0000433 */
Pali Rohár8cda4132015-01-08 10:11:40 +0100434 if (get_device_type() == HS_DEVICE)
435 omap3_update_aux_cr_secure_rx51(1 << 6, 0);
Pali Roháred407be2012-10-29 07:54:01 +0000436
437 return 0;
438}
439
440/*
441 * Routine: set_muxconf_regs
442 * Description: Setting up the configuration Mux registers specific to the
443 * hardware. Many pins need to be moved from protect to primary
444 * mode.
445 */
446void set_muxconf_regs(void)
447{
448 MUX_RX51();
449}
450
451static unsigned long int twl_wd_time; /* last time of watchdog reset */
452static unsigned long int twl_i2c_lock;
453
454/*
455 * Routine: hw_watchdog_reset
456 * Description: Reset timeout of twl4030 watchdog.
457 */
458void hw_watchdog_reset(void)
459{
460 u8 timeout = 0;
461
462 /* do not reset watchdog too often - max every 4s */
463 if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ)
464 return;
465
466 /* localy lock twl4030 i2c bus */
467 if (test_and_set_bit(0, &twl_i2c_lock))
468 return;
469
470 /* read actual watchdog timeout */
Nishanth Menonb29c2f02013-03-26 05:20:50 +0000471 twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER,
472 TWL4030_PM_RECEIVER_WATCHDOG_CFG, &timeout);
Pali Roháred407be2012-10-29 07:54:01 +0000473
474 /* timeout 0 means watchdog is disabled */
475 /* reset watchdog timeout to 31s (maximum) */
476 if (timeout != 0)
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000477 twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
478 TWL4030_PM_RECEIVER_WATCHDOG_CFG, 31);
Pali Roháred407be2012-10-29 07:54:01 +0000479
480 /* store last watchdog reset time */
481 twl_wd_time = get_timer(0);
482
483 /* localy unlock twl4030 i2c bus */
484 test_and_clear_bit(0, &twl_i2c_lock);
485}
486
487/*
488 * TWL4030 keypad handler for cfb_console
489 */
490
491static const char keymap[] = {
492 /* normal */
493 'q', 'o', 'p', ',', '\b', 0, 'a', 's',
494 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l',
495 'e', '.', 0, '\r', 0, 'z', 'x', 'c',
496 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0,
497 't', 0, 0, 0, 0, 0, 0, 0,
498 'y', 0, 0, 0, 0, 0, 0, 0,
499 'u', 0, 0, 0, 0, 0, 0, 0,
500 'i', 5, 6, 0, 0, 0, 0, 0,
501 /* fn */
502 '1', '9', '0', '=', '\b', 0, '*', '+',
503 '2', '#', '-', '_', '(', ')', '&', '!',
504 '3', '?', '^', '\r', 0, 156, '$', 238,
505 '4', '/', '\\', '"', '\'', '@', 0, '<',
506 '5', '|', '>', 0, 0, 0, 0, 0,
507 '6', 0, 0, 0, 0, 0, 0, 0,
508 '7', 0, 0, 0, 0, 0, 0, 0,
509 '8', 16, 17, 0, 0, 0, 0, 0,
510};
511
512static u8 keys[8];
513static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
514#define KEYBUF_SIZE 32
515static u8 keybuf[KEYBUF_SIZE];
516static u8 keybuf_head;
517static u8 keybuf_tail;
518
519/*
520 * Routine: rx51_kp_init
521 * Description: Initialize HW keyboard.
522 */
523int rx51_kp_init(void)
524{
525 int ret = 0;
526 u8 ctrl;
Nishanth Menonb29c2f02013-03-26 05:20:50 +0000527 ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD,
528 TWL4030_KEYPAD_KEYP_CTRL_REG, &ctrl);
Pali Roháred407be2012-10-29 07:54:01 +0000529
530 if (ret)
531 return ret;
532
533 /* turn on keyboard and use hardware scanning */
534 ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
535 ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
536 ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000537 ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
538 TWL4030_KEYPAD_KEYP_CTRL_REG, ctrl);
Pali Roháred407be2012-10-29 07:54:01 +0000539 /* enable key event status */
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000540 ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
541 TWL4030_KEYPAD_KEYP_IMR1, 0xfe);
Pali Roháred407be2012-10-29 07:54:01 +0000542 /* enable interrupt generation on rising and falling */
543 /* this is a workaround for qemu twl4030 emulation */
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000544 ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
545 TWL4030_KEYPAD_KEYP_EDR, 0x57);
Pali Roháred407be2012-10-29 07:54:01 +0000546 /* enable ISR clear on read */
Nishanth Menon0208aaf2013-03-26 05:20:49 +0000547 ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
548 TWL4030_KEYPAD_KEYP_SIH_CTRL, 0x05);
Pali Roháred407be2012-10-29 07:54:01 +0000549 return 0;
550}
551
552static void rx51_kp_fill(u8 k, u8 mods)
553{
554 /* check if some cursor key without meta fn key was pressed */
555 if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) {
556 keybuf[keybuf_tail++] = '\e';
557 keybuf_tail %= KEYBUF_SIZE;
558 keybuf[keybuf_tail++] = '[';
559 keybuf_tail %= KEYBUF_SIZE;
560 if (k == 18) /* up */
561 keybuf[keybuf_tail++] = 'A';
562 else if (k == 31) /* left */
563 keybuf[keybuf_tail++] = 'D';
564 else if (k == 33) /* down */
565 keybuf[keybuf_tail++] = 'B';
566 else if (k == 34) /* right */
567 keybuf[keybuf_tail++] = 'C';
568 keybuf_tail %= KEYBUF_SIZE;
569 return;
570 }
571
572 if (mods & 2) { /* fn meta key was pressed */
573 k = keymap[k+64];
574 } else {
575 k = keymap[k];
576 if (mods & 1) { /* ctrl key was pressed */
577 if (k >= 'a' && k <= 'z')
578 k -= 'a' - 1;
579 }
580 if (mods & 4) { /* shift key was pressed */
581 if (k >= 'a' && k <= 'z')
582 k += 'A' - 'a';
583 else if (k == '.')
584 k = ':';
585 else if (k == ',')
586 k = ';';
587 }
588 }
589 keybuf[keybuf_tail++] = k;
590 keybuf_tail %= KEYBUF_SIZE;
591}
592
593/*
594 * Routine: rx51_kp_tstc
595 * Description: Test if key was pressed (from buffer).
596 */
Simon Glass709ea542014-07-23 06:54:59 -0600597int rx51_kp_tstc(struct stdio_dev *sdev)
Pali Roháred407be2012-10-29 07:54:01 +0000598{
599 u8 c, r, dk, i;
600 u8 intr;
601 u8 mods;
602
603 /* localy lock twl4030 i2c bus */
604 if (test_and_set_bit(0, &twl_i2c_lock))
605 return 0;
606
607 /* twl4030 remembers up to 2 events */
608 for (i = 0; i < 2; i++) {
609
610 /* check interrupt register for events */
Nishanth Menonb29c2f02013-03-26 05:20:50 +0000611 twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD,
612 TWL4030_KEYPAD_KEYP_ISR1 + (2 * i), &intr);
Pali Roháred407be2012-10-29 07:54:01 +0000613
614 /* no event */
615 if (!(intr&1))
616 continue;
617
618 /* read the key state */
619 i2c_read(TWL4030_CHIP_KEYPAD,
620 TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8);
621
622 /* cut out modifier keys from the keystate */
623 mods = keys[4] >> 4;
624 keys[4] &= 0x0f;
625
626 for (c = 0; c < 8; c++) {
627
628 /* get newly pressed keys only */
629 dk = ((keys[c] ^ old_keys[c])&keys[c]);
630 old_keys[c] = keys[c];
631
632 /* fill the keybuf */
633 for (r = 0; r < 8; r++) {
634 if (dk&1)
635 rx51_kp_fill((c*8)+r, mods);
636 dk = dk >> 1;
637 }
638
639 }
640
641 }
642
643 /* localy unlock twl4030 i2c bus */
644 test_and_clear_bit(0, &twl_i2c_lock);
645
646 return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE;
647}
648
649/*
650 * Routine: rx51_kp_getc
651 * Description: Get last pressed key (from buffer).
652 */
Simon Glass709ea542014-07-23 06:54:59 -0600653int rx51_kp_getc(struct stdio_dev *sdev)
Pali Roháred407be2012-10-29 07:54:01 +0000654{
655 keybuf_head %= KEYBUF_SIZE;
Simon Glass709ea542014-07-23 06:54:59 -0600656 while (!rx51_kp_tstc(sdev))
Pali Roháred407be2012-10-29 07:54:01 +0000657 WATCHDOG_RESET();
658 return keybuf[keybuf_head++];
659}
660
661/*
662 * Routine: board_mmc_init
663 * Description: Initialize mmc devices.
664 */
665int board_mmc_init(bd_t *bis)
666{
Nikita Kiryanove3913f52012-12-03 02:19:47 +0000667 omap_mmc_init(0, 0, 0, -1, -1);
668 omap_mmc_init(1, 0, 0, -1, -1);
Pali Roháred407be2012-10-29 07:54:01 +0000669 return 0;
670}
Paul Kocialkowskiaac54502014-11-08 20:55:47 +0100671
672void board_mmc_power_init(void)
673{
674 twl4030_power_mmc_init(0);
675 twl4030_power_mmc_init(1);
676}