blob: f51e6773864097a366f79999a896036795d46911 [file] [log] [blame]
Stefan Roese81c1f6f2016-07-14 11:39:20 +02001/*
2 * Copyright (C) 2015 Marvell International Ltd.
3 *
4 * MVEBU USB HOST xHCI Controller
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#include <common.h>
10#include <dm.h>
11#include <fdtdec.h>
12#include <usb.h>
Konstantin Porotchkin81192b72017-02-12 11:10:30 +020013#include <power/regulator.h>
Stefan Roese81c1f6f2016-07-14 11:39:20 +020014#include <asm/gpio.h>
15
16#include "xhci.h"
17
Stefan Roese81c1f6f2016-07-14 11:39:20 +020018struct mvebu_xhci_platdata {
19 fdt_addr_t hcd_base;
20};
21
22/**
23 * Contains pointers to register base addresses
24 * for the usb controller.
25 */
26struct mvebu_xhci {
27 struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
28 struct usb_platdata usb_plat;
29 struct xhci_hccr *hcd;
30};
31
32/*
33 * Dummy implementation that can be overwritten by a board
34 * specific function
35 */
Jon Nettletond3d036a2017-11-06 10:33:19 +020036__weak int board_xhci_enable(fdt_addr_t base)
Stefan Roese81c1f6f2016-07-14 11:39:20 +020037{
38 return 0;
39}
40
41static int xhci_usb_probe(struct udevice *dev)
42{
43 struct mvebu_xhci_platdata *plat = dev_get_platdata(dev);
44 struct mvebu_xhci *ctx = dev_get_priv(dev);
45 struct xhci_hcor *hcor;
Konstantin Porotchkin81192b72017-02-12 11:10:30 +020046 int len, ret;
47 struct udevice *regulator;
Stefan Roese81c1f6f2016-07-14 11:39:20 +020048
49 ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
50 len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
51 hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
52
Konstantin Porotchkin81192b72017-02-12 11:10:30 +020053 ret = device_get_supply_regulator(dev, "vbus-supply", &regulator);
54 if (!ret) {
55 ret = regulator_set_enable(regulator, true);
56 if (ret) {
57 printf("Failed to turn ON the VBUS regulator\n");
58 return ret;
59 }
60 }
61
Stefan Roese81c1f6f2016-07-14 11:39:20 +020062 /* Enable USB xHCI (VBUS, reset etc) in board specific code */
Jon Nettletond3d036a2017-11-06 10:33:19 +020063 board_xhci_enable(devfdt_get_addr_index(dev, 1));
Stefan Roese81c1f6f2016-07-14 11:39:20 +020064
65 return xhci_register(dev, ctx->hcd, hcor);
66}
67
Stefan Roese81c1f6f2016-07-14 11:39:20 +020068static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
69{
70 struct mvebu_xhci_platdata *plat = dev_get_platdata(dev);
71
72 /*
73 * Get the base address for XHCI controller from the device node
74 */
Simon Glassa821c4a2017-05-17 17:18:05 -060075 plat->hcd_base = devfdt_get_addr(dev);
Stefan Roese81c1f6f2016-07-14 11:39:20 +020076 if (plat->hcd_base == FDT_ADDR_T_NONE) {
77 debug("Can't get the XHCI register base address\n");
78 return -ENXIO;
79 }
80
81 return 0;
82}
83
84static const struct udevice_id xhci_usb_ids[] = {
85 { .compatible = "marvell,armada3700-xhci" },
Jon Nettletond3d036a2017-11-06 10:33:19 +020086 { .compatible = "marvell,armada-380-xhci" },
Stefan Roesed36277e2016-08-31 06:48:56 +020087 { .compatible = "marvell,armada-8k-xhci" },
Stefan Roese81c1f6f2016-07-14 11:39:20 +020088 { }
89};
90
91U_BOOT_DRIVER(usb_xhci) = {
92 .name = "xhci_mvebu",
93 .id = UCLASS_USB,
94 .of_match = xhci_usb_ids,
95 .ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
96 .probe = xhci_usb_probe,
Masahiro Yamada9eea45f2016-10-14 10:30:01 +090097 .remove = xhci_deregister,
Stefan Roese81c1f6f2016-07-14 11:39:20 +020098 .ops = &xhci_usb_ops,
99 .platdata_auto_alloc_size = sizeof(struct mvebu_xhci_platdata),
100 .priv_auto_alloc_size = sizeof(struct mvebu_xhci),
101 .flags = DM_FLAG_ALLOC_PRIV_DMA,
102};