blob: 5827911c4e7488b8672ef2190cc5d8f76db8a176 [file] [log] [blame]
Michal Simek84c72042015-01-15 10:01:51 +01001/*
2 * Configuration for Xilinx ZynqMP
3 * (C) Copyright 2014 - 2015 Xilinx, Inc.
4 * Michal Simek <michal.simek@xilinx.com>
5 *
6 * Based on Configuration for Versatile Express
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#ifndef __XILINX_ZYNQMP_H
12#define __XILINX_ZYNQMP_H
13
14#define CONFIG_REMAKE_ELF
15
16/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
17
Michal Simek84c72042015-01-15 10:01:51 +010018/* Generic Interrupt Controller Definitions */
19#define CONFIG_GICV2
20#define GICD_BASE 0xF9010000
21#define GICC_BASE 0xF9020000
22
Vipul Kumarfce0a6b2018-02-15 11:24:41 +053023#ifndef CONFIG_SYS_MEMTEST_SCRATCH
24# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
25#endif
Michal Simekd7595122015-10-15 14:34:28 +020026
Michal Simek8d59d7f2016-02-08 09:34:53 +010027#ifndef CONFIG_NR_DRAM_BANKS
28# define CONFIG_NR_DRAM_BANKS 2
29#endif
30#define CONFIG_SYS_MEMTEST_START 0
31#define CONFIG_SYS_MEMTEST_END 1000
Michal Simek84c72042015-01-15 10:01:51 +010032
Soren Brinkmann8fbf6782016-07-27 14:12:03 -070033#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
Michal Simek84c72042015-01-15 10:01:51 +010034
Michal Simek84c72042015-01-15 10:01:51 +010035/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
Michal Simek713b6162015-11-05 08:32:14 +010036#if !defined(COUNTER_FREQUENCY)
37# define COUNTER_FREQUENCY 100000000
38#endif
Michal Simek84c72042015-01-15 10:01:51 +010039
40/* Size of malloc() pool */
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053041#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
Michal Simek84c72042015-01-15 10:01:51 +010042
43/* Serial setup */
Michal Simek636ac182016-02-23 10:02:29 +010044#define CONFIG_ARM_DCC
45#define CONFIG_CPU_ARMV8
Michal Simek84c72042015-01-15 10:01:51 +010046
Michal Simek84c72042015-01-15 10:01:51 +010047#define CONFIG_SYS_BAUDRATE_TABLE \
48 { 4800, 9600, 19200, 38400, 57600, 115200 }
49
50/* Command line configuration */
Michal Simek5cb24202015-04-15 13:36:40 +020051#define CONFIG_MP
Michal Simek84c72042015-01-15 10:01:51 +010052
Michal Simekcb7ea822015-07-23 12:03:55 +020053/* BOOTP options */
54#define CONFIG_BOOTP_BOOTFILESIZE
Michal Simekcb7ea822015-07-23 12:03:55 +020055#define CONFIG_BOOTP_MAY_FAIL
Michal Simeka1207de2016-04-22 14:28:17 +020056
Masahiro Yamada08aa0332017-01-30 19:46:51 +090057#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simek926782c2016-04-26 16:03:42 +020058# define CONFIG_SUPPORT_EMMC_BOOT
Michal Simek46f68e62016-03-18 18:10:21 +010059#endif
60
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053061#ifdef CONFIG_NAND_ARASAN
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053062# define CONFIG_SYS_MAX_NAND_DEVICE 1
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053063# define CONFIG_SYS_NAND_ONFI_DETECTION
64# define CONFIG_MTD_DEVICE
65#endif
66
Michal Simek88f05a92018-01-15 12:52:59 +010067#if defined(CONFIG_SPL_BUILD)
68#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
69#endif
70
Michal Simek84c72042015-01-15 10:01:51 +010071/* Miscellaneous configurable options */
72#define CONFIG_SYS_LOAD_ADDR 0x8000000
73
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053074#if defined(CONFIG_ZYNQMP_USB)
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053075#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
76#define DFU_DEFAULT_POLL_TIMEOUT 300
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053077#define CONFIG_USB_CABLE_CHECK
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053078#define CONFIG_THOR_RESET_OFF
79#define DFU_ALT_INFO_RAM \
80 "dfu_ram_info=" \
Siva Durga Prasad Paladugu0e431402015-09-11 11:57:25 +053081 "setenv dfu_alt_info " \
Siva Durga Prasad Paladugu1b19daf2015-09-07 11:03:47 +053082 "Image ram $kernel_addr $kernel_size\\\\;" \
83 "system.dtb ram $fdt_addr $fdt_size\0" \
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053084 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
85 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
86
87#define DFU_ALT_INFO \
88 DFU_ALT_INFO_RAM
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +053089
90#ifndef CONFIG_SPL_BUILD
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +053091# define PARTS_DEFAULT \
92 "partitions=uuid_disk=${uuid_gpt_disk};" \
93 "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
94 "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
95#endif
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053096#endif
97
98#if !defined(DFU_ALT_INFO)
99# define DFU_ALT_INFO
100#endif
101
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +0530102#if !defined(PARTS_DEFAULT)
103# define PARTS_DEFAULT
104#endif
105
Michal Simek84c72042015-01-15 10:01:51 +0100106/* Do not preserve environment */
Siva Durga Prasad Paladugu936b0382016-11-18 10:27:47 +0530107#define CONFIG_ENV_SIZE 0x8000
Michal Simek84c72042015-01-15 10:01:51 +0100108
109/* Monitor Command Prompt */
110/* Console I/O Buffer Size */
111#define CONFIG_SYS_CBSIZE 2048
Michal Simek84c72042015-01-15 10:01:51 +0100112#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Michal Simek6ee28cb2017-02-06 14:34:01 +0100113#define CONFIG_PANIC_HANG
Michal Simek84c72042015-01-15 10:01:51 +0100114#define CONFIG_SYS_MAXARGS 64
115
Michal Simekcb7ea822015-07-23 12:03:55 +0200116/* Ethernet driver */
Michal Simek596e5782015-11-30 14:34:52 +0100117#if defined(CONFIG_ZYNQ_GEM)
Michal Simekcb7ea822015-07-23 12:03:55 +0200118# define CONFIG_MII
119# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Siva Durga Prasad Paladugue2928f32016-01-05 15:21:46 +0530120# define PHY_ANEG_TIMEOUT 20000
Michal Simekcb7ea822015-07-23 12:03:55 +0200121#endif
122
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530123/* I2C */
124#if defined(CONFIG_SYS_I2C_ZYNQ)
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530125# define CONFIG_SYS_I2C
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530126#endif
127
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530128/* EEPROM */
129#ifdef CONFIG_ZYNQMP_EEPROM
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530130# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
131# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
132# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
133# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
134# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
135#endif
136
Michal Simek0d169b82016-06-01 14:29:33 +0200137#ifdef CONFIG_SATA_CEVA
Michal Simek679b9942015-09-30 17:26:55 +0200138#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
Michal Simek6fe6f132015-07-23 13:27:40 +0200139#define CONFIG_SYS_SCSI_MAX_LUN 1
140#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
141 CONFIG_SYS_SCSI_MAX_LUN)
Michal Simek6fe6f132015-07-23 13:27:40 +0200142#endif
143
Michal Simek84c72042015-01-15 10:01:51 +0100144#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
145
Michal Simek84c72042015-01-15 10:01:51 +0100146#define CONFIG_CLOCKS
147
Michal Simekb72894f2016-04-22 14:28:54 +0200148#define ENV_MEM_LAYOUT_SETTINGS \
149 "fdt_high=10000000\0" \
150 "initrd_high=10000000\0" \
151 "fdt_addr_r=0x40000000\0" \
152 "pxefile_addr_r=0x10000000\0" \
153 "kernel_addr_r=0x18000000\0" \
154 "scriptaddr=0x02000000\0" \
155 "ramdisk_addr_r=0x02100000\0" \
156
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900157#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simekb72894f2016-04-22 14:28:54 +0200158# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
159#else
160# define BOOT_TARGET_DEVICES_MMC(func)
161#endif
162
163#if defined(CONFIG_SATA_CEVA)
164# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
165#else
166# define BOOT_TARGET_DEVICES_SCSI(func)
167#endif
168
169#if defined(CONFIG_ZYNQMP_USB)
170# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
171#else
172# define BOOT_TARGET_DEVICES_USB(func)
173#endif
174
Joe Hershberger86271b32018-04-13 15:26:40 -0500175#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
Michal Simek1a82f592018-03-28 15:20:48 +0200176# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
177#else
178# define BOOT_TARGET_DEVICES_PXE(func)
179#endif
180
181#if defined(CONFIG_CMD_DHCP)
182# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
183#else
184# define BOOT_TARGET_DEVICES_DHCP(func)
185#endif
186
Michal Simekb72894f2016-04-22 14:28:54 +0200187#define BOOT_TARGET_DEVICES(func) \
188 BOOT_TARGET_DEVICES_MMC(func) \
189 BOOT_TARGET_DEVICES_USB(func) \
190 BOOT_TARGET_DEVICES_SCSI(func) \
Michal Simek1a82f592018-03-28 15:20:48 +0200191 BOOT_TARGET_DEVICES_PXE(func) \
192 BOOT_TARGET_DEVICES_DHCP(func)
Michal Simekb72894f2016-04-22 14:28:54 +0200193
194#include <config_distro_bootcmd.h>
195
196/* Initial environment variables */
197#ifndef CONFIG_EXTRA_ENV_SETTINGS
198#define CONFIG_EXTRA_ENV_SETTINGS \
199 ENV_MEM_LAYOUT_SETTINGS \
200 BOOTENV \
201 DFU_ALT_INFO
202#endif
203
Michal Simekd58fc122016-08-19 14:14:52 +0200204/* SPL can't handle all huge variables - define just DFU */
205#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
206#undef CONFIG_EXTRA_ENV_SETTINGS
207# define CONFIG_EXTRA_ENV_SETTINGS \
208 "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
209 "atf-uboot.ub ram 0x10000000 0x1000000;" \
210 "Image ram 0x80000 0x3f80000;" \
211 "system.dtb ram 0x4000000 0x100000\0" \
212 "dfu_bufsiz=0x1000\0"
213#endif
214
Michal Simeke6a9ed02015-11-20 13:17:22 +0100215#define CONFIG_SPL_TEXT_BASE 0xfffc0000
Soren Brinkmann8fbf6782016-07-27 14:12:03 -0700216#define CONFIG_SPL_STACK 0xfffffffc
Michal Simekd58fc122016-08-19 14:14:52 +0200217#define CONFIG_SPL_MAX_SIZE 0x40000
Michal Simeke6a9ed02015-11-20 13:17:22 +0100218
219/* Just random location in OCM */
Michal Simek8ed31f32016-08-30 14:58:46 +0200220#define CONFIG_SPL_BSS_START_ADDR 0x0
221#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
Michal Simeke6a9ed02015-11-20 13:17:22 +0100222
Michal Simek24124ab2017-01-16 12:07:33 +0100223#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
Michal Simek24124ab2017-01-16 12:07:33 +0100224# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
225# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
226# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
227
228# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x170000
229#endif
230
Michal Simeke6a9ed02015-11-20 13:17:22 +0100231/* u-boot is like dtb */
232#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
233#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
234
235/* ATF is my kernel image */
Michal Simek1309f672016-09-21 11:42:58 +0200236#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
Michal Simeke6a9ed02015-11-20 13:17:22 +0100237
238/* FIT load address for RAM boot */
239#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
240
241/* MMC support */
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900242#ifdef CONFIG_MMC_SDHCI_ZYNQ
Michal Simeke6a9ed02015-11-20 13:17:22 +0100243# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
244# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
245# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
246# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
Michal Simeke6a9ed02015-11-20 13:17:22 +0100247# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
248#endif
249
Michal Simekd58fc122016-08-19 14:14:52 +0200250#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
251# undef CONFIG_CMD_BOOTD
252# define CONFIG_SPL_ENV_SUPPORT
253# define CONFIG_SPL_HASH_SUPPORT
254# define CONFIG_ENV_MAX_ENTRIES 10
Michal Simekb45c17c2017-12-01 14:34:03 +0100255#endif
Michal Simekd58fc122016-08-19 14:14:52 +0200256
Michal Simekb45c17c2017-12-01 14:34:03 +0100257#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
258#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
Michal Simekd58fc122016-08-19 14:14:52 +0200259
260#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
261# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
262#endif
Michal Simekd58fc122016-08-19 14:14:52 +0200263
Michal Simekfb4000e2017-02-07 14:32:26 +0100264#define CONFIG_BOARD_EARLY_INIT_F
265
Michal Simek84c72042015-01-15 10:01:51 +0100266#endif /* __XILINX_ZYNQMP_H */