blob: 694aa8ae769b77e4aa5f2193132a827a7c11a09f [file] [log] [blame]
Akshay Bhatf9162b12016-01-29 15:16:40 -05001/*
2 * Copyright (C) 2015 Timesys Corporation
3 * Copyright (C) 2015 General Electric Company
4 * Copyright (C) 2014 Advantech
5 * Copyright (C) 2012 Freescale Semiconductor, Inc.
6 *
7 * Configuration settings for the GE MX6Q Bx50v3 boards.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef __GE_BX50V3_CONFIG_H
13#define __GE_BX50V3_CONFIG_H
14
15#include <asm/arch/imx-regs.h>
Stefano Babic552a8482017-06-29 10:16:06 +020016#include <asm/mach-imx/gpio.h>
Akshay Bhatf9162b12016-01-29 15:16:40 -050017
Ken Lin3dddc792016-10-07 10:26:56 -040018#define BX50V3_BOOTARGS_EXTRA
Akshay Bhatf9162b12016-01-29 15:16:40 -050019#if defined(CONFIG_TARGET_GE_B450V3)
20#define CONFIG_BOARD_NAME "General Electric B450v3"
Akshay Bhatf9162b12016-01-29 15:16:40 -050021#elif defined(CONFIG_TARGET_GE_B650V3)
22#define CONFIG_BOARD_NAME "General Electric B650v3"
Akshay Bhatf9162b12016-01-29 15:16:40 -050023#elif defined(CONFIG_TARGET_GE_B850V3)
24#define CONFIG_BOARD_NAME "General Electric B850v3"
Ken Lin3dddc792016-10-07 10:26:56 -040025#undef BX50V3_BOOTARGS_EXTRA
26#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
27 "video=HDMI-A-1:1024x768@60 "
Akshay Bhatf9162b12016-01-29 15:16:40 -050028#else
29#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
Akshay Bhatf9162b12016-01-29 15:16:40 -050030#endif
31
32#define CONFIG_MXC_UART_BASE UART3_BASE
Simon Glass12ca05a2016-10-17 20:12:39 -060033#define CONSOLE_DEV "ttymxc2"
Akshay Bhatf9162b12016-01-29 15:16:40 -050034
Akshay Bhatf9162b12016-01-29 15:16:40 -050035#define CONFIG_SUPPORT_EMMC_BOOT
36
Akshay Bhatf9162b12016-01-29 15:16:40 -050037
38#include "mx6_common.h"
39#include <linux/sizes.h>
40
Akshay Bhatf9162b12016-01-29 15:16:40 -050041#define CONFIG_CMDLINE_TAG
42#define CONFIG_SETUP_MEMORY_TAGS
43#define CONFIG_INITRD_TAG
44#define CONFIG_REVISION_TAG
45#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
46
Akshay Bhatf9162b12016-01-29 15:16:40 -050047#define CONFIG_MXC_GPIO
48#define CONFIG_MXC_UART
49
Akshay Bhatf9162b12016-01-29 15:16:40 -050050#define CONFIG_MXC_OCOTP
51
52/* SATA Configs */
Andrew Shaduraaacc10c2016-05-24 15:56:21 +020053#ifdef CONFIG_CMD_SATA
Akshay Bhatf9162b12016-01-29 15:16:40 -050054#define CONFIG_SYS_SATA_MAX_DEVICE 1
55#define CONFIG_DWC_AHSATA_PORT_ID 0
56#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
57#define CONFIG_LBA48
Andrew Shaduraaacc10c2016-05-24 15:56:21 +020058#endif
Akshay Bhatf9162b12016-01-29 15:16:40 -050059
60/* MMC Configs */
61#define CONFIG_FSL_ESDHC
62#define CONFIG_FSL_USDHC
63#define CONFIG_SYS_FSL_ESDHC_ADDR 0
Akshay Bhatf9162b12016-01-29 15:16:40 -050064#define CONFIG_BOUNCE_BUFFER
Akshay Bhatf9162b12016-01-29 15:16:40 -050065
66/* USB Configs */
Andrew Shadurafc449022016-05-24 15:56:19 +020067#ifdef CONFIG_USB
Akshay Bhatf9162b12016-01-29 15:16:40 -050068#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
69#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
70#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
71#define CONFIG_MXC_USB_FLAGS 0
Akshay Bhatf9162b12016-01-29 15:16:40 -050072
Akshay Bhatf9162b12016-01-29 15:16:40 -050073#define CONFIG_USBD_HS
Akshay Bhatf9162b12016-01-29 15:16:40 -050074#define CONFIG_USB_GADGET_MASS_STORAGE
Andrew Shadurafc449022016-05-24 15:56:19 +020075#endif
Akshay Bhatf9162b12016-01-29 15:16:40 -050076
77/* Networking Configs */
Andrew Shadurac26ffd92016-05-24 15:56:20 +020078#ifdef CONFIG_NET
Akshay Bhatf9162b12016-01-29 15:16:40 -050079#define CONFIG_FEC_MXC
80#define CONFIG_MII
81#define IMX_FEC_BASE ENET_BASE_ADDR
82#define CONFIG_FEC_XCV_TYPE RGMII
83#define CONFIG_ETHPRIME "FEC"
84#define CONFIG_FEC_MXC_PHYADDR 4
Akshay Bhatf9162b12016-01-29 15:16:40 -050085#define CONFIG_PHY_ATHEROS
Andrew Shadurac26ffd92016-05-24 15:56:20 +020086#endif
Akshay Bhatf9162b12016-01-29 15:16:40 -050087
88/* Serial Flash */
Akshay Bhatf9162b12016-01-29 15:16:40 -050089#ifdef CONFIG_CMD_SF
90#define CONFIG_MXC_SPI
91#define CONFIG_SF_DEFAULT_BUS 0
92#define CONFIG_SF_DEFAULT_CS 0
93#define CONFIG_SF_DEFAULT_SPEED 20000000
94#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
95#endif
96
97/* allow to overwrite serial and ethaddr */
98#define CONFIG_ENV_OVERWRITE
99#define CONFIG_CONS_INDEX 1
Akshay Bhatf9162b12016-01-29 15:16:40 -0500100
Akshay Bhatf9162b12016-01-29 15:16:40 -0500101#define CONFIG_LOADADDR 0x12000000
102#define CONFIG_SYS_TEXT_BASE 0x17800000
103
104#define CONFIG_EXTRA_ENV_SETTINGS \
105 "script=boot.scr\0" \
106 "image=/boot/uImage\0" \
107 "uboot=u-boot.imx\0" \
108 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
109 "fdt_addr=0x18000000\0" \
110 "boot_fdt=yes\0" \
111 "ip_dyn=yes\0" \
Simon Glass12ca05a2016-10-17 20:12:39 -0600112 "console=" CONSOLE_DEV "\0" \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500113 "fdt_high=0xffffffff\0" \
114 "initrd_high=0xffffffff\0" \
115 "sddev=0\0" \
116 "emmcdev=1\0" \
117 "partnum=1\0" \
118 "update_sd_firmware=" \
119 "if test ${ip_dyn} = yes; then " \
120 "setenv get_cmd dhcp; " \
121 "else " \
122 "setenv get_cmd tftp; " \
123 "fi; " \
124 "if mmc dev ${mmcdev}; then " \
125 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
126 "setexpr fw_sz ${filesize} / 0x200; " \
127 "setexpr fw_sz ${fw_sz} + 1; " \
128 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
129 "fi; " \
130 "fi\0" \
131 "update_sf_uboot=" \
132 "if tftp $loadaddr $uboot; then " \
133 "sf probe; " \
134 "sf erase 0 0xC0000; " \
135 "sf write $loadaddr 0x400 $filesize; " \
136 "echo 'U-Boot upgraded. Please reset'; " \
137 "fi\0" \
138 "setargs=setenv bootargs console=${console},${baudrate} " \
Ken Lin3dddc792016-10-07 10:26:56 -0400139 "root=/dev/${rootdev} rw rootwait cma=128M " \
140 BX50V3_BOOTARGS_EXTRA "\0" \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500141 "loadbootscript=" \
142 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
143 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
144 " source\0" \
145 "loadimage=" \
146 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
147 "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
148 "tryboot=" \
149 "if run loadbootscript; then " \
150 "run bootscript; " \
151 "else " \
152 "if run loadimage; then " \
153 "run doboot; " \
154 "fi; " \
155 "fi;\0" \
156 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
157 "run setargs; " \
158 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
159 "if run loadfdt; then " \
160 "bootm ${loadaddr} - ${fdt_addr}; " \
161 "else " \
162 "if test ${boot_fdt} = try; then " \
163 "bootm; " \
164 "else " \
165 "echo WARN: Cannot load the DT; " \
166 "fi; " \
167 "fi; " \
168 "else " \
169 "bootm; " \
170 "fi;\0" \
171 "netargs=setenv bootargs console=${console},${baudrate} " \
172 "root=/dev/nfs " \
173 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
174 "netboot=echo Booting from net ...; " \
175 "run netargs; " \
176 "if test ${ip_dyn} = yes; then " \
177 "setenv get_cmd dhcp; " \
178 "else " \
179 "setenv get_cmd tftp; " \
180 "fi; " \
181 "${get_cmd} ${image}; " \
182 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
183 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
184 "bootm ${loadaddr} - ${fdt_addr}; " \
185 "else " \
186 "if test ${boot_fdt} = try; then " \
187 "bootm; " \
188 "else " \
189 "echo WARN: Cannot load the DT; " \
190 "fi; " \
191 "fi; " \
192 "else " \
193 "bootm; " \
194 "fi;\0" \
195
Andrew Shadurafc449022016-05-24 15:56:19 +0200196#define CONFIG_MMCBOOTCOMMAND \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500197 "setenv dev mmc; " \
Kimmo Surakkaf6825e42016-05-24 15:56:23 +0200198 "setenv rootdev mmcblk0p${partnum}; " \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500199 \
200 "setenv devnum ${sddev}; " \
201 "if mmc dev ${devnum}; then " \
202 "run tryboot; " \
Kimmo Surakkaf6825e42016-05-24 15:56:23 +0200203 "setenv rootdev mmcblk1p${partnum}; " \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500204 "fi; " \
205 \
206 "setenv devnum ${emmcdev}; " \
207 "if mmc dev ${devnum}; then " \
208 "run tryboot; " \
209 "fi; " \
Andrew Shadurafc449022016-05-24 15:56:19 +0200210
211#define CONFIG_USBBOOTCOMMAND \
212 "usb start; " \
213 "setenv dev usb; " \
214 "setenv devnum 0; " \
Kimmo Surakkaf6825e42016-05-24 15:56:23 +0200215 "setenv rootdev sda${partnum}; " \
Andrew Shadurafc449022016-05-24 15:56:19 +0200216 "run tryboot; " \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500217 \
Andrew Shadurafc449022016-05-24 15:56:19 +0200218 CONFIG_MMCBOOTCOMMAND \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500219 "bmode usb; " \
220
Andrew Shadurafc449022016-05-24 15:56:19 +0200221#ifdef CONFIG_CMD_USB
222#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
223#else
224#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
225#endif
226
Akshay Bhatf9162b12016-01-29 15:16:40 -0500227#define CONFIG_ARP_TIMEOUT 200UL
228
229/* Miscellaneous configurable options */
230#define CONFIG_SYS_LONGHELP
Akshay Bhatf9162b12016-01-29 15:16:40 -0500231#define CONFIG_AUTO_COMPLETE
232
Akshay Bhatf9162b12016-01-29 15:16:40 -0500233#define CONFIG_SYS_MEMTEST_START 0x10000000
234#define CONFIG_SYS_MEMTEST_END 0x10010000
235#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
236
237#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
238
239#define CONFIG_CMDLINE_EDITING
Akshay Bhatf9162b12016-01-29 15:16:40 -0500240
241/* Physical Memory Map */
242#define CONFIG_NR_DRAM_BANKS 1
243#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
244
245#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
246#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
247#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
248
249#define CONFIG_SYS_INIT_SP_OFFSET \
250 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
251#define CONFIG_SYS_INIT_SP_ADDR \
252 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
253
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900254/* environment organization */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500255#define CONFIG_ENV_SIZE (8 * 1024)
256#define CONFIG_ENV_OFFSET (768 * 1024)
257#define CONFIG_ENV_SECT_SIZE (64 * 1024)
258#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
259#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
260#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
261#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
262
Akshay Bhatf9162b12016-01-29 15:16:40 -0500263#ifndef CONFIG_SYS_DCACHE_OFF
Akshay Bhatf9162b12016-01-29 15:16:40 -0500264#endif
265
266#define CONFIG_SYS_FSL_USDHC_NUM 3
267
268/* Framebuffer */
Andrew Shadura07aa0302016-05-24 15:56:18 +0200269#ifdef CONFIG_VIDEO
Akshay Bhatf9162b12016-01-29 15:16:40 -0500270#define CONFIG_VIDEO_IPUV3
Akshay Bhatf9162b12016-01-29 15:16:40 -0500271#define CONFIG_VIDEO_BMP_RLE8
272#define CONFIG_SPLASH_SCREEN
273#define CONFIG_SPLASH_SCREEN_ALIGN
274#define CONFIG_BMP_16BPP
275#define CONFIG_VIDEO_LOGO
276#define CONFIG_VIDEO_BMP_LOGO
Akshay Bhatf9162b12016-01-29 15:16:40 -0500277#define CONFIG_IMX_HDMI
278#define CONFIG_IMX_VIDEO_SKIP
Andrew Shadura07aa0302016-05-24 15:56:18 +0200279#endif
Akshay Bhatf9162b12016-01-29 15:16:40 -0500280
Akshay Bhat54971ac2016-04-12 18:13:59 -0400281#define CONFIG_PWM_IMX
282#define CONFIG_IMX6_PWM_PER_CLK 66000000
283
Akshay Bhatf9162b12016-01-29 15:16:40 -0500284#ifdef CONFIG_CMD_PCI
Akshay Bhatf9162b12016-01-29 15:16:40 -0500285#define CONFIG_PCI_SCAN_SHOW
286#define CONFIG_PCIE_IMX
287#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
288#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
289#endif
290
291/* I2C Configs */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500292#define CONFIG_SYS_I2C
293#define CONFIG_SYS_I2C_MXC
294#define CONFIG_SYS_I2C_SPEED 100000
295#define CONFIG_SYS_I2C_MXC_I2C1
296#define CONFIG_SYS_I2C_MXC_I2C2
297#define CONFIG_SYS_I2C_MXC_I2C3
298
Ian Raybe2808c2017-08-22 09:03:54 +0300299#define CONFIG_SYS_NUM_I2C_BUSES 9
300#define CONFIG_SYS_I2C_MAX_HOPS 1
301#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
302 {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
303 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
304 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
305 {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
306 {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
307 {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
308 {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
309 {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
310 }
311
312#define CONFIG_BCH
313
Akshay Bhatf9162b12016-01-29 15:16:40 -0500314#endif /* __GE_BX50V3_CONFIG_H */