blob: affe9f98adff4c27b8761749ffcc2dd68e93afd6 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0
Anton Schubert9c28d612015-08-11 11:54:01 +02002/*
3 * PCIe driver for Marvell MVEBU SoCs
4 *
5 * Based on Barebox drivers/pci/pci-mvebu.c
6 *
7 * Ported to U-Boot by:
8 * Anton Schubert <anton.schubert@gmx.de>
9 * Stefan Roese <sr@denx.de>
Anton Schubert9c28d612015-08-11 11:54:01 +020010 */
11
12#include <common.h>
13#include <pci.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090014#include <linux/errno.h>
Anton Schubert9c28d612015-08-11 11:54:01 +020015#include <asm/io.h>
16#include <asm/arch/cpu.h>
17#include <asm/arch/soc.h>
18#include <linux/mbus.h>
19
20DECLARE_GLOBAL_DATA_PTR;
21
22/* PCIe unit register offsets */
23#define SELECT(x, n) ((x >> n) & 1UL)
24
25#define PCIE_DEV_ID_OFF 0x0000
26#define PCIE_CMD_OFF 0x0004
27#define PCIE_DEV_REV_OFF 0x0008
28#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
29#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
30#define PCIE_CAPAB_OFF 0x0060
31#define PCIE_CTRL_STAT_OFF 0x0068
32#define PCIE_HEADER_LOG_4_OFF 0x0128
33#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
34#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
35#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
36#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
37#define PCIE_WIN5_CTRL_OFF 0x1880
38#define PCIE_WIN5_BASE_OFF 0x1884
39#define PCIE_WIN5_REMAP_OFF 0x188c
40#define PCIE_CONF_ADDR_OFF 0x18f8
41#define PCIE_CONF_ADDR_EN BIT(31)
42#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
43#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
44#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
45#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
46#define PCIE_CONF_ADDR(dev, reg) \
47 (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \
48 PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
49 PCIE_CONF_ADDR_EN)
50#define PCIE_CONF_DATA_OFF 0x18fc
51#define PCIE_MASK_OFF 0x1910
52#define PCIE_MASK_ENABLE_INTS (0xf << 24)
53#define PCIE_CTRL_OFF 0x1a00
54#define PCIE_CTRL_X1_MODE BIT(0)
55#define PCIE_STAT_OFF 0x1a04
56#define PCIE_STAT_BUS (0xff << 8)
57#define PCIE_STAT_DEV (0x1f << 16)
58#define PCIE_STAT_LINK_DOWN BIT(0)
59#define PCIE_DEBUG_CTRL 0x1a60
60#define PCIE_DEBUG_SOFT_RESET BIT(20)
61
62struct resource {
63 u32 start;
64 u32 end;
65};
66
67struct mvebu_pcie {
68 struct pci_controller hose;
69 char *name;
70 void __iomem *base;
71 void __iomem *membase;
72 struct resource mem;
73 void __iomem *iobase;
74 u32 port;
75 u32 lane;
76 u32 lane_mask;
77 pci_dev_t dev;
78};
79
80#define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci)
81
82/*
83 * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
VlaoMao49b23e02017-09-22 18:49:02 +030084 * into SoCs address space. Each controller will map 128M of MEM
Anton Schubert9c28d612015-08-11 11:54:01 +020085 * and 64K of I/O space when registered.
86 */
87static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
VlaoMao49b23e02017-09-22 18:49:02 +030088#define PCIE_MEM_SIZE (128 << 20)
Anton Schubert9c28d612015-08-11 11:54:01 +020089
90#if defined(CONFIG_ARMADA_38X)
91#define PCIE_BASE(if) \
92 ((if) == 0 ? \
Dirk Eibach882d3fa2017-01-11 16:00:45 +010093 MVEBU_REG_PCIE0_BASE : \
94 (MVEBU_REG_PCIE_BASE + 0x4000 * (if - 1)))
Anton Schubert9c28d612015-08-11 11:54:01 +020095
96/*
97 * On A38x MV6820 these PEX ports are supported:
98 * 0 - Port 0.0
Dirk Eibach882d3fa2017-01-11 16:00:45 +010099 * 1 - Port 1.0
100 * 2 - Port 2.0
101 * 3 - Port 3.0
Anton Schubert9c28d612015-08-11 11:54:01 +0200102 */
Dirk Eibach882d3fa2017-01-11 16:00:45 +0100103#define MAX_PEX 4
Anton Schubert9c28d612015-08-11 11:54:01 +0200104static struct mvebu_pcie pcie_bus[MAX_PEX];
105
106static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
107 int *mem_target, int *mem_attr)
108{
Dirk Eibach882d3fa2017-01-11 16:00:45 +0100109 u8 port[] = { 0, 1, 2, 3 };
110 u8 lane[] = { 0, 0, 0, 0 };
111 u8 target[] = { 8, 4, 4, 4 };
112 u8 attr[] = { 0xe8, 0xe8, 0xd8, 0xb8 };
Anton Schubert9c28d612015-08-11 11:54:01 +0200113
114 pcie->port = port[pex_idx];
115 pcie->lane = lane[pex_idx];
116 *mem_target = target[pex_idx];
117 *mem_attr = attr[pex_idx];
118}
119#else
120#define PCIE_BASE(if) \
121 ((if) < 8 ? \
122 (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \
123 (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000))
124
125/*
126 * On AXP MV78460 these PEX ports are supported:
127 * 0 - Port 0.0
128 * 1 - Port 0.1
129 * 2 - Port 0.2
130 * 3 - Port 0.3
131 * 4 - Port 1.0
132 * 5 - Port 1.1
133 * 6 - Port 1.2
134 * 7 - Port 1.3
135 * 8 - Port 2.0
136 * 9 - Port 3.0
137 */
138#define MAX_PEX 10
139static struct mvebu_pcie pcie_bus[MAX_PEX];
140
141static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
142 int *mem_target, int *mem_attr)
143{
144 u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 };
145 u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 };
146 u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 };
147 u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78,
148 0xe8, 0xd8, 0xb8, 0x78,
149 0xf8, 0xf8 };
150
151 pcie->port = port[pex_idx];
152 pcie->lane = lane[pex_idx];
153 *mem_target = target[pex_idx];
154 *mem_attr = attr[pex_idx];
155}
156#endif
157
Phil Sutter9a045272015-12-25 14:41:20 +0100158static int mvebu_pex_unit_is_x4(int pex_idx)
159{
160 int pex_unit = pex_idx < 9 ? pex_idx >> 2 : 3;
161 u32 mask = (0x0f << (pex_unit * 8));
162
163 return (readl(COMPHY_REFCLK_ALIGNMENT) & mask) == mask;
164}
165
Anton Schubert9c28d612015-08-11 11:54:01 +0200166static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
167{
168 u32 val;
169 val = readl(pcie->base + PCIE_STAT_OFF);
170 return !(val & PCIE_STAT_LINK_DOWN);
171}
172
173static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
174{
175 u32 stat;
176
177 stat = readl(pcie->base + PCIE_STAT_OFF);
178 stat &= ~PCIE_STAT_BUS;
179 stat |= busno << 8;
180 writel(stat, pcie->base + PCIE_STAT_OFF);
181}
182
183static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
184{
185 u32 stat;
186
187 stat = readl(pcie->base + PCIE_STAT_OFF);
188 stat &= ~PCIE_STAT_DEV;
189 stat |= devno << 16;
190 writel(stat, pcie->base + PCIE_STAT_OFF);
191}
192
193static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
194{
195 u32 stat;
196
197 stat = readl(pcie->base + PCIE_STAT_OFF);
198 return (stat & PCIE_STAT_BUS) >> 8;
199}
200
201static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
202{
203 u32 stat;
204
205 stat = readl(pcie->base + PCIE_STAT_OFF);
206 return (stat & PCIE_STAT_DEV) >> 16;
207}
208
209static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
210{
211 return container_of(hose, struct mvebu_pcie, hose);
212}
213
214static int mvebu_pcie_read_config_dword(struct pci_controller *hose,
215 pci_dev_t dev, int offset, u32 *val)
216{
217 struct mvebu_pcie *pcie = hose_to_pcie(hose);
218 int local_bus = PCI_BUS(pcie->dev);
219 int local_dev = PCI_DEV(pcie->dev);
220 u32 reg;
221
222 /* Only allow one other device besides the local one on the local bus */
223 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
224 if (local_dev == 0 && PCI_DEV(dev) != 1) {
225 /*
226 * If local dev is 0, the first other dev can
227 * only be 1
228 */
229 *val = 0xffffffff;
230 return 1;
231 } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
232 /*
233 * If local dev is not 0, the first other dev can
234 * only be 0
235 */
236 *val = 0xffffffff;
237 return 1;
238 }
239 }
240
241 /* write address */
242 reg = PCIE_CONF_ADDR(dev, offset);
243 writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
244 *val = readl(pcie->base + PCIE_CONF_DATA_OFF);
245
246 return 0;
247}
248
249static int mvebu_pcie_write_config_dword(struct pci_controller *hose,
250 pci_dev_t dev, int offset, u32 val)
251{
252 struct mvebu_pcie *pcie = hose_to_pcie(hose);
253 int local_bus = PCI_BUS(pcie->dev);
254 int local_dev = PCI_DEV(pcie->dev);
255
256 /* Only allow one other device besides the local one on the local bus */
257 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
258 if (local_dev == 0 && PCI_DEV(dev) != 1) {
259 /*
260 * If local dev is 0, the first other dev can
261 * only be 1
262 */
263 return 1;
264 } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
265 /*
266 * If local dev is not 0, the first other dev can
267 * only be 0
268 */
269 return 1;
270 }
271 }
272
273 writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF);
274 writel(val, pcie->base + PCIE_CONF_DATA_OFF);
275
276 return 0;
277}
278
279/*
280 * Setup PCIE BARs and Address Decode Wins:
281 * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
282 * WIN[0-3] -> DRAM bank[0-3]
283 */
284static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
285{
286 const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
287 u32 size;
288 int i;
289
290 /* First, disable and clear BARs and windows. */
291 for (i = 1; i < 3; i++) {
292 writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
293 writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
294 writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
295 }
296
297 for (i = 0; i < 5; i++) {
298 writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
299 writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
300 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
301 }
302
303 writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
304 writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
305 writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
306
307 /* Setup windows for DDR banks. Count total DDR size on the fly. */
308 size = 0;
309 for (i = 0; i < dram->num_cs; i++) {
310 const struct mbus_dram_window *cs = dram->cs + i;
311
312 writel(cs->base & 0xffff0000,
313 pcie->base + PCIE_WIN04_BASE_OFF(i));
314 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
315 writel(((cs->size - 1) & 0xffff0000) |
316 (cs->mbus_attr << 8) |
317 (dram->mbus_dram_target_id << 4) | 1,
318 pcie->base + PCIE_WIN04_CTRL_OFF(i));
319
320 size += cs->size;
321 }
322
323 /* Round up 'size' to the nearest power of two. */
324 if ((size & (size - 1)) != 0)
325 size = 1 << fls(size);
326
327 /* Setup BAR[1] to all DRAM banks. */
328 writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
329 writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
330 writel(((size - 1) & 0xffff0000) | 0x1,
331 pcie->base + PCIE_BAR_CTRL_OFF(1));
332}
333
334void pci_init_board(void)
335{
336 int mem_target, mem_attr, i;
337 int bus = 0;
338 u32 reg;
339 u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4);
340
341 /* Check SoC Control Power State */
342 debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n",
343 __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1),
344 SELECT(soc_ctrl, 2));
345
346 for (i = 0; i < MAX_PEX; i++) {
347 struct mvebu_pcie *pcie = &pcie_bus[i];
348 struct pci_controller *hose = &pcie->hose;
349
350 /* Get port number, lane number and memory target / attr */
351 mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
352
353 /* Don't read at all from pci registers if port power is down */
Dirk Eibach882d3fa2017-01-11 16:00:45 +0100354 if (SELECT(soc_ctrl, pcie->port) == 0) {
355 if (pcie->lane == 0)
356 debug("%s: skipping port %d\n", __func__, pcie->port);
Anton Schubert9c28d612015-08-11 11:54:01 +0200357 continue;
358 }
359
360 pcie->base = (void __iomem *)PCIE_BASE(i);
361
362 /* Check link and skip ports that have no link */
363 if (!mvebu_pcie_link_up(pcie)) {
364 debug("%s: PCIe %d.%d - down\n", __func__,
365 pcie->port, pcie->lane);
366 continue;
367 }
368 debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
369 pcie->port, pcie->lane, (u32)pcie->base);
370
371 /* Read Id info and local bus/dev */
372 debug("direct conf read %08x, local bus %d, local dev %d\n",
373 readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
374 mvebu_pcie_get_local_dev_nr(pcie));
375
376 mvebu_pcie_set_local_bus_nr(pcie, bus);
377 mvebu_pcie_set_local_dev_nr(pcie, 0);
378 pcie->dev = PCI_BDF(bus, 0, 0);
379
380 pcie->mem.start = (u32)mvebu_pcie_membase;
381 pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
382 mvebu_pcie_membase += PCIE_MEM_SIZE;
383
384 if (mvebu_mbus_add_window_by_id(mem_target, mem_attr,
385 (phys_addr_t)pcie->mem.start,
386 PCIE_MEM_SIZE)) {
387 printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
388 (u32)pcie->mem.start, PCIE_MEM_SIZE);
389 }
390
391 /* Setup windows and configure host bridge */
392 mvebu_pcie_setup_wins(pcie);
393
394 /* Master + slave enable. */
395 reg = readl(pcie->base + PCIE_CMD_OFF);
396 reg |= PCI_COMMAND_MEMORY;
397 reg |= PCI_COMMAND_MASTER;
398 reg |= BIT(10); /* disable interrupts */
399 writel(reg, pcie->base + PCIE_CMD_OFF);
400
401 /* Setup U-Boot PCI Controller */
402 hose->first_busno = 0;
403 hose->current_busno = bus;
404
405 /* PCI memory space */
406 pci_set_region(hose->regions + 0, pcie->mem.start,
407 pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
408 pci_set_region(hose->regions + 1,
409 0, 0,
410 gd->ram_size,
411 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
412 hose->region_count = 2;
413
414 pci_set_ops(hose,
415 pci_hose_read_config_byte_via_dword,
416 pci_hose_read_config_word_via_dword,
417 mvebu_pcie_read_config_dword,
418 pci_hose_write_config_byte_via_dword,
419 pci_hose_write_config_word_via_dword,
420 mvebu_pcie_write_config_dword);
421 pci_register_hose(hose);
422
423 hose->last_busno = pci_hose_scan(hose);
424
425 /* Set BAR0 to internal registers */
426 writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
427 writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
428
429 bus = hose->last_busno + 1;
Phil Sutter9a045272015-12-25 14:41:20 +0100430
431 /* need to skip more for X4 links, otherwise scan will hang */
432 if (mvebu_soc_family() == MVEBU_SOC_AXP) {
433 if (mvebu_pex_unit_is_x4(i))
434 i += 3;
435 }
Anton Schubert9c28d612015-08-11 11:54:01 +0200436 }
437}