Weijie Gao | 4bc0104 | 2022-05-20 11:22:21 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2022 MediaTek Inc. All rights reserved. |
| 4 | * |
| 5 | * Author: Weijie Gao <weijie.gao@mediatek.com> |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/clock/mt7621-clk.h> |
| 9 | #include <dt-bindings/reset/mt7621-reset.h> |
| 10 | #include <dt-bindings/phy/phy.h> |
| 11 | |
| 12 | / { |
| 13 | #address-cells = <1>; |
| 14 | #size-cells = <1>; |
| 15 | compatible = "mediatek,mt7621-soc"; |
| 16 | |
| 17 | cpus { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <0>; |
| 20 | |
| 21 | cpu@0 { |
| 22 | device_type = "cpu"; |
| 23 | compatible = "mips,mips1004Kc"; |
| 24 | reg = <0>; |
| 25 | }; |
| 26 | |
| 27 | cpu@1 { |
| 28 | device_type = "cpu"; |
| 29 | compatible = "mips,mips1004Kc"; |
| 30 | reg = <1>; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | clk48m: clk48m { |
| 35 | compatible = "fixed-clock"; |
| 36 | |
| 37 | clock-frequency = <48000000>; |
| 38 | |
| 39 | #clock-cells = <0>; |
| 40 | }; |
| 41 | |
| 42 | clk50m: clk50m { |
| 43 | compatible = "fixed-clock"; |
| 44 | |
| 45 | clock-frequency = <50000000>; |
| 46 | |
| 47 | #clock-cells = <0>; |
| 48 | }; |
| 49 | |
| 50 | sysc: sysctrl@1e000000 { |
| 51 | compatible = "mediatek,mt7621-sysc", "syscon"; |
| 52 | reg = <0x1e000000 0x100>; |
| 53 | |
| 54 | clkctrl: clock-controller@1e000030 { |
| 55 | compatible = "mediatek,mt7621-clk"; |
| 56 | mediatek,memc = <&memc>; |
| 57 | |
| 58 | #clock-cells = <1>; |
| 59 | }; |
| 60 | }; |
| 61 | |
| 62 | rstctrl: reset-controller@1e000034 { |
| 63 | compatible = "mediatek,mtmips-reset"; |
| 64 | reg = <0x1e000034 0x4>; |
| 65 | #reset-cells = <1>; |
| 66 | }; |
| 67 | |
| 68 | reboot: resetctl-reboot { |
| 69 | compatible = "resetctl-reboot"; |
| 70 | |
| 71 | resets = <&rstctrl RST_SYS>; |
| 72 | reset-names = "sysreset"; |
| 73 | }; |
| 74 | |
| 75 | memc: memctrl@1e005000 { |
| 76 | compatible = "mediatek,mt7621-memc", "syscon"; |
| 77 | reg = <0x1e005000 0x1000>; |
| 78 | }; |
| 79 | |
| 80 | pinctrl: pinctrl@1e000060 { |
| 81 | compatible = "mediatek,mt7621-pinctrl"; |
| 82 | reg = <0x1e000048 0x30>; |
| 83 | |
| 84 | pinctrl-names = "default"; |
| 85 | pinctrl-0 = <&state_default>; |
| 86 | |
| 87 | state_default: pin_state { |
| 88 | }; |
| 89 | |
| 90 | uart1_pins: uart1_pins { |
| 91 | groups = "uart1"; |
| 92 | function = "uart"; |
| 93 | }; |
| 94 | |
| 95 | uart2_pins: uart2_pins { |
| 96 | groups = "uart2"; |
| 97 | function = "uart"; |
| 98 | }; |
| 99 | |
| 100 | uart3_pins: uart3_pins { |
| 101 | groups = "uart3"; |
| 102 | function = "uart"; |
| 103 | }; |
| 104 | |
| 105 | sdxc_pins: sdxc_pins { |
| 106 | groups = "sdxc"; |
| 107 | function = "sdxc"; |
| 108 | }; |
| 109 | |
| 110 | spi_pins: spi_pins { |
| 111 | groups = "spi"; |
| 112 | function = "spi"; |
| 113 | }; |
| 114 | |
| 115 | eth_pins: eth_pins { |
| 116 | mdio_pins { |
| 117 | groups = "mdio"; |
| 118 | function = "mdio"; |
| 119 | }; |
| 120 | |
| 121 | rgmii1_pins { |
| 122 | groups = "rgmii1"; |
| 123 | function = "rgmii"; |
| 124 | }; |
| 125 | |
| 126 | esw_pins { |
| 127 | groups = "esw int"; |
| 128 | function = "esw int"; |
| 129 | }; |
| 130 | |
| 131 | mdio_pconf { |
| 132 | groups = "mdio"; |
| 133 | drive-strength = <2>; |
| 134 | }; |
| 135 | }; |
| 136 | }; |
| 137 | |
| 138 | watchdog: watchdog@1e000100 { |
| 139 | compatible = "mediatek,mt7621-wdt"; |
| 140 | reg = <0x1e000100 0x40>; |
| 141 | |
| 142 | resets = <&rstctrl RST_TIMER>; |
| 143 | reset-names = "wdt"; |
| 144 | |
| 145 | status = "disabled"; |
| 146 | }; |
| 147 | |
| 148 | gpio: gpio@1e000600 { |
| 149 | #address-cells = <1>; |
| 150 | #size-cells = <0>; |
| 151 | |
| 152 | compatible = "mtk,mt7621-gpio"; |
| 153 | reg = <0x1e000600 0x100>; |
| 154 | |
| 155 | resets = <&rstctrl RST_PIO>; |
| 156 | reset-names = "pio"; |
| 157 | |
| 158 | gpio0: bank@0 { |
| 159 | reg = <0>; |
| 160 | compatible = "mtk,mt7621-gpio-bank"; |
| 161 | gpio-controller; |
| 162 | #gpio-cells = <2>; |
| 163 | }; |
| 164 | |
| 165 | gpio1: bank@1 { |
| 166 | reg = <1>; |
| 167 | compatible = "mtk,mt7621-gpio-bank"; |
| 168 | gpio-controller; |
| 169 | #gpio-cells = <2>; |
| 170 | }; |
| 171 | |
| 172 | gpio2: bank@2 { |
| 173 | reg = <2>; |
| 174 | compatible = "mtk,mt7621-gpio-bank"; |
| 175 | gpio-controller; |
| 176 | #gpio-cells = <2>; |
| 177 | }; |
| 178 | }; |
| 179 | |
| 180 | spi: spi@1e000b00 { |
| 181 | compatible = "ralink,mt7621-spi"; |
| 182 | reg = <0x1e000b00 0x40>; |
| 183 | |
| 184 | status = "disabled"; |
| 185 | |
| 186 | pinctrl-names = "default"; |
| 187 | pinctrl-0 = <&spi_pins>; |
| 188 | |
| 189 | resets = <&rstctrl RST_SPI>; |
| 190 | reset-names = "spi"; |
| 191 | |
| 192 | clocks = <&clkctrl MT7621_CLK_SPI>; |
| 193 | |
| 194 | #address-cells = <1>; |
| 195 | #size-cells = <0>; |
| 196 | }; |
| 197 | |
| 198 | uart0: uart1@1e000c00 { |
| 199 | compatible = "mediatek,hsuart", "ns16550a"; |
| 200 | reg = <0x1e000c00 0x100>; |
| 201 | |
| 202 | pinctrl-names = "default"; |
| 203 | pinctrl-0 = <&uart1_pins>; |
| 204 | |
| 205 | clocks = <&clkctrl MT7621_CLK_UART1>; |
| 206 | |
| 207 | resets = <&rstctrl RST_UART1>; |
| 208 | |
| 209 | reg-shift = <2>; |
| 210 | }; |
| 211 | |
| 212 | uart1: uart2@1e000d00 { |
| 213 | compatible = "mediatek,hsuart", "ns16550a"; |
| 214 | reg = <0x1e000d00 0x100>; |
| 215 | |
| 216 | pinctrl-names = "default"; |
| 217 | pinctrl-0 = <&uart2_pins>; |
| 218 | |
| 219 | clocks = <&clkctrl MT7621_CLK_UART2>; |
| 220 | |
| 221 | resets = <&rstctrl RST_UART2>; |
| 222 | |
| 223 | reg-shift = <2>; |
| 224 | |
| 225 | status = "disabled"; |
| 226 | }; |
| 227 | |
| 228 | uart2: uart3@1e000e00 { |
| 229 | compatible = "mediatek,hsuart", "ns16550a"; |
| 230 | reg = <0x1e000e00 0x100>; |
| 231 | |
| 232 | pinctrl-names = "default"; |
| 233 | pinctrl-0 = <&uart3_pins>; |
| 234 | |
| 235 | clocks = <&clkctrl MT7621_CLK_UART3>; |
| 236 | |
| 237 | resets = <&rstctrl RST_UART3>; |
| 238 | |
| 239 | reg-shift = <2>; |
| 240 | |
| 241 | status = "disabled"; |
| 242 | }; |
| 243 | |
| 244 | eth: eth@1e100000 { |
| 245 | compatible = "mediatek,mt7621-eth"; |
| 246 | reg = <0x1e100000 0x20000>; |
| 247 | mediatek,ethsys = <&sysc>; |
| 248 | |
| 249 | pinctrl-names = "default"; |
| 250 | pinctrl-0 = <ð_pins>; |
| 251 | |
| 252 | resets = <&rstctrl RST_FE>, <&rstctrl RST_GMAC>, <&rstctrl RST_MCM>; |
| 253 | reset-names = "fe", "gmac", "mcm"; |
| 254 | |
| 255 | clocks = <&clkctrl MT7621_CLK_GDMA>, |
| 256 | <&clkctrl MT7621_CLK_ETH>; |
| 257 | clock-names = "gmac", "fe"; |
| 258 | |
| 259 | #address-cells = <1>; |
| 260 | #size-cells = <0>; |
| 261 | |
| 262 | mediatek,gmac-id = <0>; |
| 263 | phy-mode = "rgmii"; |
| 264 | mediatek,switch = "mt7530"; |
| 265 | mediatek,mcm; |
| 266 | |
| 267 | fixed-link { |
| 268 | speed = <1000>; |
| 269 | full-duplex; |
| 270 | }; |
| 271 | }; |
| 272 | |
| 273 | mmc: mmc@1e130000 { |
| 274 | compatible = "mediatek,mt7621-mmc"; |
| 275 | reg = <0x1e130000 0x4000>; |
| 276 | |
| 277 | status = "disabled"; |
| 278 | |
| 279 | bus-width = <4>; |
| 280 | builtin-cd = <1>; |
| 281 | r_smpl = <1>; |
| 282 | |
| 283 | pinctrl-names = "default"; |
| 284 | pinctrl-0 = <&sdxc_pins>; |
| 285 | |
| 286 | clocks = <&clk50m>, <&clkctrl MT7621_CLK_SHXC>; |
| 287 | clock-names = "source", "hclk"; |
| 288 | |
| 289 | resets = <&rstctrl RST_SDXC>; |
| 290 | }; |
| 291 | |
| 292 | ssusb: usb@1e1c0000 { |
| 293 | compatible = "mediatek,mt7621-xhci", "mediatek,mtk-xhci"; |
| 294 | reg = <0x1e1c0000 0x1000>, <0x1e1d0700 0x100>; |
| 295 | reg-names = "mac", "ippc"; |
| 296 | |
| 297 | clocks = <&clk48m>, <&clk48m>; |
| 298 | clock-names = "sys_ck", "ref_ck"; |
| 299 | |
| 300 | phys = <&u2port0 PHY_TYPE_USB2>, |
| 301 | <&u3port0 PHY_TYPE_USB3>, |
| 302 | <&u2port1 PHY_TYPE_USB2>; |
| 303 | |
| 304 | status = "disabled"; |
| 305 | }; |
| 306 | |
| 307 | u3phy: usb-phy@1e1d0000 { |
| 308 | compatible = "mediatek,mt7621-u3phy", |
| 309 | "mediatek,generic-tphy-v1"; |
| 310 | reg = <0x1e1d0000 0x700>; |
| 311 | #address-cells = <1>; |
| 312 | #size-cells = <1>; |
| 313 | ranges; |
| 314 | status = "disabled"; |
| 315 | |
| 316 | u2port0: usb-phy@1e1d0800 { |
| 317 | reg = <0x1e1d0800 0x0100>; |
| 318 | #phy-cells = <1>; |
| 319 | clocks = <&clk48m>; |
| 320 | clock-names = "ref"; |
| 321 | }; |
| 322 | |
| 323 | u3port0: usb-phy@1e1d0900 { |
| 324 | reg = <0x1e1d0900 0x0100>; |
| 325 | #phy-cells = <1>; |
| 326 | }; |
| 327 | |
| 328 | u2port1: usb-phy@1e1d1000 { |
| 329 | reg = <0x1e1d1000 0x0100>; |
| 330 | #phy-cells = <1>; |
| 331 | clocks = <&clk48m>; |
| 332 | clock-names = "ref"; |
| 333 | }; |
| 334 | }; |
| 335 | |
| 336 | i2c: i2c@1e000900 { |
| 337 | compatible = "i2c-gpio"; |
| 338 | |
| 339 | status = "disabled"; |
| 340 | |
| 341 | i2c-gpio,delay-us = <3>; |
| 342 | |
| 343 | gpios = <&gpio0 3 1>, /* PIN3 as SDA */ |
| 344 | <&gpio0 4 1>; /* PIN4 as CLK */ |
| 345 | |
| 346 | #address-cells = <1>; |
| 347 | #size-cells = <0>; |
| 348 | }; |
| 349 | }; |