blob: c69df6c7bfe271f297859284f67f7ea7b588a422 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Stefano Babicd81b27a2012-10-10 21:11:46 +00002/*
3 * Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
4 *
5 * Based on flea3.c and mx35pdk.c
Stefano Babicd81b27a2012-10-10 21:11:46 +00006 */
7
8#include <common.h>
Simon Glass9b4a2052019-12-28 10:45:05 -07009#include <init.h>
Stefano Babicd81b27a2012-10-10 21:11:46 +000010#include <asm/io.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090011#include <linux/errno.h>
Stefano Babicd81b27a2012-10-10 21:11:46 +000012#include <asm/arch/imx-regs.h>
13#include <asm/arch/crm_regs.h>
14#include <asm/arch/clock.h>
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +000015#include <asm/arch/iomux-mx35.h>
Stefano Babicd81b27a2012-10-10 21:11:46 +000016#include <i2c.h>
Stefano Babic05a860c2012-12-08 12:02:45 +010017#include <power/pmic.h>
Stefano Babicd81b27a2012-10-10 21:11:46 +000018#include <fsl_pmic.h>
19#include <mc13892.h>
20#include <mmc.h>
Yangbo Lue37ac712019-06-21 11:42:28 +080021#include <fsl_esdhc_imx.h>
Stefano Babicd81b27a2012-10-10 21:11:46 +000022#include <linux/types.h>
23#include <asm/gpio.h>
24#include <asm/arch/sys_proto.h>
25#include <netdev.h>
26#include <spl.h>
27
28#define CCM_CCMR_CONFIG 0x003F4208
29
30#define ESDCTL_DDR2_CONFIG 0x007FFC3F
31
32/* For MMC */
33#define GPIO_MMC_CD 7
34#define GPIO_MMC_WP 8
35
36DECLARE_GLOBAL_DATA_PTR;
37
38int dram_init(void)
39{
40 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
41 PHYS_SDRAM_1_SIZE);
42
43 return 0;
44}
45
46static void board_setup_sdram(void)
47{
48 struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
49
50 /* Initialize with default values both CSD0/1 */
51 writel(0x2000, &esdc->esdctl0);
52 writel(0x2000, &esdc->esdctl1);
53
54 mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
55 13, 10, 2, 0x8080);
56}
57
58static void setup_iomux_fec(void)
59{
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +000060 static const iomux_v3_cfg_t fec_pads[] = {
61 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
62 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
63 MX35_PAD_FEC_RX_DV__FEC_RX_DV,
64 MX35_PAD_FEC_COL__FEC_COL,
65 MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
66 MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
67 MX35_PAD_FEC_TX_EN__FEC_TX_EN,
68 MX35_PAD_FEC_MDC__FEC_MDC,
69 MX35_PAD_FEC_MDIO__FEC_MDIO,
70 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
71 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
72 MX35_PAD_FEC_CRS__FEC_CRS,
73 MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
74 MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
75 MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
76 MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
77 MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
78 MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
79 };
80
Stefano Babicd81b27a2012-10-10 21:11:46 +000081 /* setup pins for FEC */
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +000082 imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
Stefano Babicd81b27a2012-10-10 21:11:46 +000083}
84
85int woodburn_init(void)
86{
87 struct ccm_regs *ccm =
88 (struct ccm_regs *)IMX_CCM_BASE;
89
90 /* initialize PLL and clock configuration */
91 writel(CCM_CCMR_CONFIG, &ccm->ccmr);
92
93 /* Set-up RAM */
94 board_setup_sdram();
95
96 /* enable clocks */
97 writel(readl(&ccm->cgr0) |
98 MXC_CCM_CGR0_EMI_MASK |
99 MXC_CCM_CGR0_EDIO_MASK |
100 MXC_CCM_CGR0_EPIT1_MASK,
101 &ccm->cgr0);
102
103 writel(readl(&ccm->cgr1) |
104 MXC_CCM_CGR1_FEC_MASK |
105 MXC_CCM_CGR1_GPIO1_MASK |
106 MXC_CCM_CGR1_GPIO2_MASK |
107 MXC_CCM_CGR1_GPIO3_MASK |
108 MXC_CCM_CGR1_I2C1_MASK |
109 MXC_CCM_CGR1_I2C2_MASK |
110 MXC_CCM_CGR1_I2C3_MASK,
111 &ccm->cgr1);
112
113 /* Set-up NAND */
114 __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
115
116 /* Set pinmux for the required peripherals */
117 setup_iomux_fec();
118
119 /* setup GPIO1_4 FEC_ENABLE signal */
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000120 imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4);
Stefano Babicd81b27a2012-10-10 21:11:46 +0000121 gpio_direction_output(4, 1);
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000122 imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9);
Fabio Estevam96346702012-12-11 06:19:55 +0000123 gpio_direction_output(9, 1);
Stefano Babicd81b27a2012-10-10 21:11:46 +0000124
125 return 0;
126}
127
128#if defined(CONFIG_SPL_BUILD)
129void board_init_f(ulong dummy)
130{
131 /* Set the stack pointer. */
132 asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
133
134 /* Initialize MUX and SDRAM */
135 woodburn_init();
136
137 /* Clear the BSS. */
Simon Glass3929fb02013-03-14 06:54:53 +0000138 memset(__bss_start, 0, __bss_end - __bss_start);
Stefano Babicd81b27a2012-10-10 21:11:46 +0000139
Stefano Babicd81b27a2012-10-10 21:11:46 +0000140 preloader_console_init();
141 timer_init();
142
143 board_init_r(NULL, 0);
144}
145
146void spl_board_init(void)
147{
148}
149
150#endif
151
152
153/* Booting from NOR in external mode */
154int board_early_init_f(void)
155{
156 return woodburn_init();
157}
158
159
160int board_init(void)
161{
162 struct pmic *p;
163 u32 val;
Stefano Babic05a860c2012-12-08 12:02:45 +0100164 int ret;
Stefano Babicd81b27a2012-10-10 21:11:46 +0000165
166 /* address of boot parameters */
167 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
168
Stefano Babic05a860c2012-12-08 12:02:45 +0100169 ret = pmic_init(I2C_PMIC);
170 if (ret)
171 return ret;
172
173 p = pmic_get("FSL_PMIC");
Stefano Babicd81b27a2012-10-10 21:11:46 +0000174
175 /*
176 * Set switchers in Auto in NORMAL mode & STANDBY mode
177 * Setup the switcher mode for SW1 & SW2
178 */
179 pmic_reg_read(p, REG_SW_4, &val);
180 val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
181 (SWMODE_MASK << SWMODE2_SHIFT)));
182 val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
183 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
184 /* Set SWILIMB */
185 val |= (1 << 22);
186 pmic_reg_write(p, REG_SW_4, val);
187
188 /* Setup the switcher mode for SW3 & SW4 */
189 pmic_reg_read(p, REG_SW_5, &val);
190 val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
191 (SWMODE_MASK << SWMODE3_SHIFT));
192 val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
193 (SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
194 pmic_reg_write(p, REG_SW_5, val);
195
196 /* Set VGEN1 to 3.15V */
197 pmic_reg_read(p, REG_SETTING_0, &val);
198 val &= ~(VGEN1_MASK);
199 val |= VGEN1_3_15;
200 pmic_reg_write(p, REG_SETTING_0, val);
201
202 pmic_reg_read(p, REG_MODE_0, &val);
203 val |= VGEN1EN;
204 pmic_reg_write(p, REG_MODE_0, val);
205 udelay(2000);
206
207 return 0;
208}
209
Yangbo Lue37ac712019-06-21 11:42:28 +0800210#if defined(CONFIG_FSL_ESDHC_IMX)
Stefano Babicd81b27a2012-10-10 21:11:46 +0000211struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
212
213int board_mmc_init(bd_t *bis)
214{
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000215 static const iomux_v3_cfg_t sdhc1_pads[] = {
216 MX35_PAD_SD1_CMD__ESDHC1_CMD,
217 MX35_PAD_SD1_CLK__ESDHC1_CLK,
218 MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
219 MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
220 MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
221 MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
222 };
223
Stefano Babicd81b27a2012-10-10 21:11:46 +0000224 /* configure pins for SDHC1 only */
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000225 imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
Stefano Babicd81b27a2012-10-10 21:11:46 +0000226
227 /* MMC Card Detect on GPIO1_7 */
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000228 imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7);
Stefano Babicd81b27a2012-10-10 21:11:46 +0000229 gpio_direction_input(GPIO_MMC_CD);
230
Fabio Estevam47509532013-01-18 23:57:45 +0000231 /* MMC Write Protection on GPIO1_8 */
Benoît Thébaudeau8342cc32013-05-03 10:32:23 +0000232 imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8);
Fabio Estevam47509532013-01-18 23:57:45 +0000233 gpio_direction_input(GPIO_MMC_WP);
Stefano Babicd81b27a2012-10-10 21:11:46 +0000234
235 esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
236
237 return fsl_esdhc_initialize(bis, &esdhc_cfg);
238}
239
240int board_mmc_getcd(struct mmc *mmc)
241{
242 return !gpio_get_value(GPIO_MMC_CD);
243}
244#endif
245
246u32 get_board_rev(void)
247{
248 int rev = 0;
249
250 return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
251}